Stahlwille 730N/5 Torque wrench service MANOSKOP Model 730N/5 Measuring r. 10-50N·m Tool holders 9 x 12 mm L. 330mm Features:click-typeno need to reset to "0" as measuring element is only loaded during the tightening processfast, precise setting thanks to QuickSelect quick adjustmentdual stop signalvery easy-to-read dual scale with colour differentiation of N-m/ft-lb or ft-lb/in-lbcontinued load after release or loads against the functional direction, e.g. with tight screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017Delivered in a textile bag (from size 65). 65)DBGM (German Federal Utility Model)Mount for interchangeable insert/shell toolsQuickRelease safety lockLeft-hand tightening by turning the insert/shell toolsDisplay deviation ± 3 % (size 2; a/2 4 %) Technical features:Scale division N·m: 5 N·mScale division ft·lb: 1 ft·lbMeasuring range N·m: 10-50 N·mMeasuring range ft·lb: 7-37 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 0,25 N·m Size: 5 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 330 mmLF: 280,5 mmMA N·m: 10 N·mNominal value N·m: 50 N·mSF: 17,5 mmWeight: 831 gWeigth kg: 0.9 kgStahlwille 730N/5Stahlwille product no: 50181005EAN: 4018754139514 

Stahlwille 730D/10 Torque wrench service/series MANOSKOP Model 730D Measuring r. 10-100N·m Drive L. 467mm Features:Tactile and audible release signalMount for interchangeable insert/shell toolsQuickRelease safety lockquick setting via practical keypadautomatically correct tightening torque after entering a deviating gaugeoverload protection thanks to acoustic and visual warning signalno unintentional adjustment thanks to automatic key lockdisplay function even with counter-clockwise torquesunits of measurement: N-m, ft-lb, in-lbDifferent tolerance limits can be set depending on the tightening operationOptical evaluation of the tightening operation by green and red indication on the displayAdditional protection of the default settings (function mode, click-type or setpoint value, unit of measurement, tolerance value, saving, deviating gauge) by PIN codeSaving of up to 7. 500 screwdriving dataUSB interfaceautomatic notification of the next calibration dateCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 77062-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Certified in accordance with DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a sheet steel case)PatentedSupplied with 2 mignon batteries 1.5 V. Mignon NiMH batteries AA/LR6, 1.2 V, can be used.Display deviation ± 2 %, ± 1 digit Technical features:Measuring range N·m: 10-100 N·mMeasuring range ft·lb: 7,4-75 ft·lbMeasuring range in·lb: 90-900 in·lbSetting display resolution N·m: 0,2/0,1 N·mSetting display resolution ft·lb: 0,2/0,1 ft·lbSetting display resolution in·lb: 2/1,0 in·lbBattery type: Mignon (AA) 1,5V Width mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 1510 gSize: 10 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 467 mmLF: 426,5 mmMA N·m: 10 N·mNominal value N·m: 100 N·mSF: 17,5 mmStahlwille 730D/10Stahlwille product no: 96501710EAN: 4018754180318 

Stahlwille 721/5 QUICK Torque wrench MANOSKOP Model 721/5 Quick Measuring r. 6-50N·m Drive 3/8 L. 352mm Features:click-typeno need to reset to "0" as measuring element is only loaded during the tightening processflash adjustment via easy-to-operate clamping lever in the handleergonomically shaped, non-slip adjustment element with thumb recessOptimised ball handle for fatigue-free workingDual stop signalDouble scale N-m/ft-lbContinued load after click-type operation or loads against the functional direction, e.g. in the case of tight screws Protection of all sensitive parts by the sturdy tubular steel housingCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706. Readjustment without disassembly if necessary.Certificate in accordance with DIN EN ISO 6789-2:2017Display deviation ± 4 % Technical features:Scale division N·m: 2 N·mScale division ft·lb: 1 ft·lbMeasuring range N·m: 6-50 N·mMeasuring range ft·lb: 5-36 ft·lbExternal square drive (inch): 3/8 b1: 28 mmb2: 27,5 mmDIN: DIN EN ISO 6789-2:2017 Size: 5 Height mm (h1): 23 mmHeight mm (h2): 14,5 mmLength mm (L): 352 mmLF: 293 mmMA N·m: 6 N·mNominal value N·m: 50 N·mWeight: 880 gWeigth kg: 0.880 kgStahlwille 721/5 QUICKStahlwille product no: 50204005EAN: 4018754268917 

Stahlwille 730/5 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 10-50N·m Tool holders 9 x 12 mm L. 330mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division N·m: 5 N·mScale division ft·lb: 1 ft·lbMeasuring range N·m: 10-50 N·mMeasuring range ft·lb: 7-37 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 0,25 N·m Weight with box: 1632 gSize: 5 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 330 mmLF: 280,5 mmMA N·m: 10 N·mNominal value N·m: 50 N·mSF: 17,5 mmWeight: 828 gWeigth kg: 1.420 kgStahlwille 730/5 FIXStahlwille product no: 96503005EAN: 4018754269433