Gedore red R21000042 Special set ELECTRO-TECHNICS 42 pieces, loose   Features: Double open-ended spanner: To DIN 3110, ISO 3318, ISO 1085, ISO 10102, 15° jaw position, surface matt satin plate-chromed, chrome-vanadium steel VDE Combination pliers: To DIN ISO 5746, meets requirements of VDE 0682 Part 201 and EN/EC 60900, with gripping zones for flat and round material, inductively hardened cutting edges, dual-material handle, chrome-vanadium steel VDE power side cutter: To DIN ISO 5749, meets requirements of VDE 0682 Part 201 and EN/EC 60900 high cutting performance, slim head form, inductively hardened cutting edges, dual-material handle, chrome-vanadium steel VDE Bent nose telephone pliers, angled: To DIN ISO 5745, meets requirements of VDE 0682 Part 201 and EN/EC 60900, 45°-angled gripping surfaces, lengthways-serrated, inductively hardened cutting edges, dual-material handle, forged VDE Cable knife: VDE-insulated to DIN EN 60900, stable, partially insulated and replaceable blade, straight cutting edge, protective cap, safety handle of impact-resistant plastic VDE screwdriver slotted and cross-slotted PH, VDE-insulated in acc. with DIN EN 60900, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle Hexagon socket key: To DIN ISO 2936, hardened throughout, chrome-vanadium steel, phosphated, in holder Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge Club hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 6475, ash handle, paint-coated shaft end, ring wedge Flat chisel: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel Electrician’s chisel, square: Cutting edge and head ground, impact end annealed, chrome-vanadium steel Point chisel, octagonal: To DIN 7256, cutting edge and head ground, impact end tempered, chrome-vanadium steel Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel Phase tester: Max. 250 volt, black gun-metal tip, red plastic jacket, anti-slip handle surface, synthetic clip, to DIN 0680-6:1977-04 Wood sectioned folding ruler Metric dual scale, Accuracy Class III, EC-design approval for continuous mm division, beech wood with through-riveted joints Carbide scriber: Pencil and carbide scriber in one, straight form, retractable nib, metal housing, attaching clip Voltage tester: To DIN ISO 0680, 8 LED displays, DC and AC measurement, Protection classification IP65 Spirit level: Smooth aluminium rectangular profile, two acrylic vials, measurement accuracy: +/- 0.5 mm/m, powder-coated, impact-resistant end cap Scraper: For minor improvements/repairs, wooden handle, with hanging-up hole Blue pencil: Oval form   Contents: Double open-ended spanners 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 21x23 24x27 mm Engineers’ hammer 300 g Club hammer 1000 g Carbide scriber with clip 150 mm Centre punch 5 mm | 120 mm Flat cold chisel 250 mm Point chisel 250 mm Electricians' chisel 250 mm Voltage tester 6-400 V AC/DC Phase tester 3 mm | 135 mm Wood sectioned folding ruler 2 m Scraper 60 mm VDE Screwdriver slotted 2.5 3 4 5.5 mm VDE Screwdriver cross-head PH 1 2 VDE Combination pliers 180 mm VDE Side cutter 160 mm VDE Bent nose telephone pliers, angled 200 mm VDE cable cutter 185 mm Hexagon socket key set, 9 pcs, 1.5 2 2.5 3 4 5 6 8 10 mm Spirit level 300 mm Blue pencil 175 mm

Gedore red R21000057 Tool set SCHRAUBER loose 57pcs Features:Socket wrench tools: Coupler in acc. with DIN 3120, ISO 1174, with ball locking device Square drive acc. to DIN 3120, ISO 1174, with ball retention groove 2C reversible ratchet, lever for reversible right and left hand operation, push button release, fine-toothed, oval head, dual-meterial handle, hands-friendliy transfer of force, for sockets Socket 1/2", hex, metric, short design based on DIN 3124, ISO 2725 Spark plug socket 1/2" with pressed-in holding rubber Spark plug socket 1/2" with pressed-in holding rubber an dadditional drive 24 mm Socket extenstion 1/2" Universal joint 1/2", joint bolted on, design to DIN 3123 - C12,5 For hand-operated bolting operations Chrome-vanadium-steel, matt satin chrome-plated Holding rail, for equipping with adaptors for 1/2" sockets, aluminium Combination spanner: To DIN 3113, Form A ISO 3318, ISO 7738, ring side angled 15° jaw position, surface matt satin, plate-chromed, chrome-vanadium steel Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge Combination pliers: To DIN ISO 5746, gripping zones for flat and round material, inductively hardened cutting edges, dual-material handle, chrome-vanadium steel Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, dual-material handle, chrome-vanadium steel 2C screwdriver: Slot and cross-slotted PH, to DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle Hexagon socket key: To DIN, hardened throughout, chrome-vanadium steel, phosphated, in holder Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated Phase tester: Max. 250 volt, 1-component handle, transparent plastic, metal clip Tape measure: ABS dual-material housing, clip, nylon-coated tape, mm-graduation, with tape rewind and lock, magnetic stop, Accuracy Class II

Gedore red R21000059 Tool set ALLROUND loose 59 pieces   Features: Combination spanner: To DIN 3113, Form A ISO 3318, ISO 7738, ring side angled 15° jaw position, surface matt satin, plate-chromed, chrome-vanadium steel Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge Combination pliers: To DIN ISO 5746, gripping zones for flat and round material, inductively hardened cutting edges, dual-material handle, chrome-vanadium steel Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, dual-material handle, chrome-vanadium steel 2C screwdriver: Slot and cross-slotted PH, PZ , to DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle Hexagon socket key: To DIN, hardened throughout, chrome-vanadium steel, phosphated, in holder Flat and cross-cut chisel: To DIN, cutting edge and head ground, impact end tempered, chrome-vanadium steel Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated Phase tester: Max. 250 volt, black gun-metal tip, red plastic jacket, anti-slip handle surface, synthetic clip, to DIN 0680-6:1977-04 Round and flat files: To DIN 7261, dual-material handle, hands-friendly transfer of force, hole for hanging up Adjustable spanner: 15° jaw position, polished head with lasered scale, 40-50 HRC, chrome-vanadium steel, chrome-plated Wood sectioned folding ruler Metric dual scale, Accuracy Class III, EC-design approval for continuous mm division, beech wood with through-riveted joints Carbide scriber: Pencil and carbide scriber in one, straight form, retractable nib, metal housing, attaching clip   Contents: Combination spanner 8 9 10 11 12 13 14 15 16 17 18 19 21 22 24 27 mm Adjustable spanner 6” 12” Scriber 150 mm Wood sectioned folding ruler 2 m Screwdriver slotted 4 5.5 6.5 mm Screwdriver cross-slotted PH 1 2 Screwdriver cross-slotted PZ 1 2 Hexagon socket key set, 9 pcs, 1.5 2 2.5 3 4 5 6 8 10 mm Hexagon socket key set, 9 pcs, TX T10 T15 T20 T25 T27 T30 T40 T45 T50 Phase tester 3 mm 135 mm Combination plier 180 mm Side cutter 160 mm Water pump pliers 10", 250 mm Engineers' hammer 300 g 800 g Flat cold chisel 250 mm Cross-cut chisel 150 mm Drift punch 3 4 5 mm | 150 mm Centre punch 5 mm | 120 mm Flat file 310 mm Round file 310 mm

Gedore red R21000072 Tool set BASIS loose 72pcs Features:Multifunction saw: Rotating saw blade and frame, hand protector, dual-material handle, delivered with HSS bi-metal saw blade (24 tpi) Spirit level: Smooth aluminium rectangular profile, two acrylic vials, measurement accuracy: +/- 0.5 mm/m, powder-coated, impact-resistant end cap Double open-ended spanner: To DIN 3110, ISO 3318, ISO 1085, ISO 10102, 15° jaw position, surface matt satin plate-chromed, chrome-vanadium steel Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge Combination pliers: To DIN ISO 5746, gripping zones for flat and round material, inductively hardened cutting edges, dual-material handle, chrome-vanadium steel Power side cutter: To DIN ISO 5749, high degree of cutting performance, inductively hardened, long cutting edges, dual-material handle, chrome-vanadium steel Pincer: To DIN ISO 9243, head ground, inductively hardened cutting edges, dipped handle covers, forged Tape measure: ABS dual-material housing, clip, nylon-coated tape, mm-graduation, with tape rewind and lock, magnetic stop, Accuracy Class II Blue pencil: Oval form 2C screwdriver: PZ slot and cross-slotted, acc. to DIN and VDE screwdriver slot and cross-slotted PH, VDE-insulated acc. to DIN EN 60900, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle Hexagon socket key: To DIN ISO 2936, hardened throughout, chrome-vanadium steel, phosphated, in holder Flat chisel: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated Phase tester: Max. 250 volt, black gun-metal tip, red plastic jacket, anti-slip handle surface, synthetic clip, to DIN 0680-6:1977-04 VDE Cable knife: VDE-insulated to DIN EN 60900, strong straight blade, straight cutting edge, protective cap, dual-material handle, hands-friendly transfer of force Half-round file: To DIN 7261, dual-material handle, hands-friendly transfer of force, hole for hanging up Utility knife: Blade 18 mm, synthetic housing, metal blade guide, one-handed operation, 5 spare blades (100mm long, 0.4mm thick), with sharpener Adjustable spanner: 15° jaw position, polished head with lasered scale, 40-50 HRC, chrome-vanadium steel, chrome-plated Bit box: Drive adapter with magnetic bit locking, hexagon drive to DIN 3126 ISO 1173 - C 6.3, machine operated, phosphated, plastic box Bit screwdriver: Dual-material handle, hex recess drive to DIN 3126 - D 6.3 (1/4") for bits, magnet, elongated hole in the handle, chrome-vanadium steel

Gedore red R21000108 Tool set ALL-IN loose 108pcs Features:Socket wrench tools: Coupler in acc. with DIN 3120, ISO 1174, with ball locking device Square drive acc. to DIN 3120, ISO 1174, with ball retention groove 2C reversible ratchet, lever for reversible right and left hand operation, push button release, fine-toothed, oval head, dual-meterial handle, hands-friendliy transfer of force, for sockets Socket 1/2", hex, metric, short design based on DIN 3124, ISO 2725 Socket extenstion Universal joint 1/2", joint bolted on, design to DIN 3123 - C12,5 For hand-operated bolting operations Chrome-vanadium-steel, matt satin chrome-plated Holding rail, for equipping with adaptors for 1/2" sockets, aluminium Ratchet wrench, metric: Based on DN 3113, ISO 3318, straight, 15° jaw position, surface matt satin plate-chromed, chrome-vanadium steel Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge Combination pliers: To DIN ISO 5746, gripping zones for flat and round material, inductively hardened cutting edges, dual-material handle, chrome-vanadium steel Power side cutter: To DIN ISO 5749, high degree of cutting performance, inductively hardened, long cutting edges, dual-material handle, chrome-vanadium steel Bent nose telephone pliers, straight: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, dual-material handle, chrome-vanadium steel Tape measure: ABS dual-material housing, clip, nylon-coated tape, mm-graduation, with tape rewind and lock, magnetic stop, Accuracy Class II 2C screwdriver: Slot and cross-slotted PH, to DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle Hexagon socket key: To DIN ISO 2936, hardened throughout, chrome-vanadium steel, phosphated, in holder Flat chisel: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel Pin punch, octagonal: To DIN 6450, impact end annealed, chrome-vanadium steel Utility knife: Blade 18 mm, synthetic housing, metal blade guide, one-handed operation, 5 spare blades (100mm long, 0.4mm thick), with sharpener Bit box: Drive adapter with magnetic bit locking, hexagon drive to DIN 3126 ISO 1173 - C 6.3, machine operated, phosphated, plastic box Bit screwdriver: Dual-material handle, hex recess drive to DIN 3126 - D 6.3 (1/4") for bits, magnet, elongated hole in the handle, chrome-vanadium steel

Gedore red R21010000 Tool set in foam modules, 81 pieces   Features: Socket wrench tools: Coupler in acc. with DIN 3120, ISO 1174, with ball locking device Square drive acc. to DIN 3120, ISO 1174, with ball retention groove 2C reversible ratchet, lever for reversible right and left hand operation, push button release, fine-toothed, oval head, dual-meterial handle, hands-friendliy transfer of force, for sockets Socket extenstion 1/2" Sliding T-handle with slide 1/2", acc. to DIN 3122, ISO 3315 Universal joint 1/2", joint bolted on, design to DIN 3123 - C12,5 Chrome-vanadium-steel, matt satin chrome-plated Square drive acc. to DIN 3120, ISO 1174, with ball retention groove Socket, hex: Metric, short, to DIN 3124, ISO 2725 Screwdriver bit socket 1/2" for in-hex screws: Pressed-in, phosphated pin Chrome-vanadium steel, matt satin chrome-plated For hand-operated bolting operations Combination spanner: To DIN 3113, Form A ISO 3318, ISO 7738, ring side angled 15° jaw position, surface matt satin, plate-chromed Hexagon socket key set: To DIN ISO 2936, hardened throughout, phosphated Chrome-vanadium steel Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated Combination pliers: To DIN ISO 5746, inductively hardened cutting edges, dual-material handle, forged Bent nose telephone pliers: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, dual-material handle, forged Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, dual-material handle, forged Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge Flat cold chisel, flat oval: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel Cross-cut chisel, flat oval: To DIN 6451, cutting edge, sides and head ground, impact end tempered, chrome-vanadium steel Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel Pin punch, octagonal: To DIN 6450, impact end annealed, chrome-vanadium steel 2C screwdriver slotted and PH: To DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle 2C screwdriver TX: Chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle Utility knife: Blade 25 mm, synthetic housing, metal blade guide, one-handed operation, 5 spare blades   Contents: R22150013 Screwdriver set in 1/3 foam module R22150018 Pliers set in 1/3 foam module R22150019 Hammer and chisel set in 1/3 foam module R22150009 Socket set 1/2" in foam module R22150008 Ratchet and accessories 1/2” in the 1/3 foam module R22150015 Screwdriver set in 1/3 foam module R22250000 Combination spanner set and hexagon socket keys in 2/3 foam module R93200025 Utility knife with 5 spare blades

Gedore red R21010002 Tool set in 11 foam modules, 166pcs   Features: Socket wrench tools: Coupler in acc. with DIN 3120, ISO 1174, with ball locking device Square drive acc. to DIN 3120, ISO 1174, with ball retention groove Chrome-vanadium-steel, matt satin chrome-plated 2C reversible ratchet 1/4": To DIN 3120 - A 6.3, ISO 1174, lever for right and left-hand operation, push button release, fine-toothed, oval form, dual-material handle Square plug-in handle 1/4": 1-component handle with in-hex Socket 1/4" hexagon: Metric, short, to DIN 3124, ISO 2725 Screwdriver bit socket 1/4" for in-hex screws: Pressed-in, phosphated pin Screwdriver bit socket 1/4" slotted, PH, PZ, TX with drill hole: Pressed-in, phosphated pin Socket extension 1/4": Sliding T-handle with slide 1/4": Acc. to DIN 3122, ISO 3315 Universal joint 1/4": Joint bolted on, design to DIN 3123 - C 6.3 2C reversible ratchet 1/2": To DIN 3120 - A 12.5, ISO 1174, lever for right and left-hand operation, push button release, fine-toothed, oval form, dual-material handle Socket extension 1/2": Sliding T bar 1/2", with slide, to DIN 3122, ISO 3315 Universal joint 1/2": Joint bolted on, design to DIN 3123 - C 12.5 Socket, hex: Metric, short, to DIN 3124, ISO 2725 Screwdriver bit socket 1/2" for in-hex screws: Pressed-in, phosphated pin Ratchet wrenches: Based on DIN 3113, ISO 3318, ring offset 15°, reversible for right and left-hand operation, 15° jaw position, surface matt satin chrome-plated Hexagon socket key set: To DIN ISO 2936, hardened throughout, phosphated Chrome-vanadium steel Flat ring spanner: To DIN 838, ISO 3318, ISO 1085, ISO 10104, 5° offset, chrome vanadium steel, surface matt satin, chrome-plated Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated Combination pliers: To DIN ISO 5746, inductively hardened cutting edges, dual-material handle, forged Bent nose telephone pliers: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, dual-material handle, forged Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, dual-material handle, forged Circlip pliers: To DIN 5254 Form A, straight precision tips, opening spring, DIN 471 for retaining rings, DIN 983 To DIN 5254 Form B, angled precision tips, opening spring, DIN 471 for retaining rings, DIN 983 To DIN 5256 Form C, straight precision tips, opening spring, DIN 472 for retaining rings, DIN 984 To DIN 5256 Form D, 90° angled precision tips, DIN 472 for retaining rings, DIN 984 Dipped handle protectors Chrome-vanadium steel Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge Flat cold chisel, flat oval: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel Cross-cut chisel, flat oval: To DIN 6451, cutting edge, sides and head ground, impact end tempered, chrome-vanadium steel Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel Pin punch, octagonal: To DIN 6450, impact end annealed, chrome-vanadium steel 2C screwdriver: Slot and cross-slotted PZ, to DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle 2C screwdriver TX: Chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle Digital measuring calliper: LCD display, reset setting, precision roller adjustment, mm/inch changeover, ground tips, in box incl. spare battery, operating instructions, PC interface, locking screw, thread table on the back Clamp locking plier: Lengthways-serrated grip surfaces, setting screw and release lever, one-hand operation, surface chrome-plated, chrome vanadium steel Half-round file: To DIN 7261, dual-material handle, hands-friendly transfer of force, hole for hanging up Tape measure: ABS dual-material housing, clip, nylon-coated tape, mm-graduation, with tape rewind and lock, magnetic stop, Accuracy Class II Utility knife: Blade 25 mm, synthetic housing, metal blade guide, one-handed operation, 5 spare blades (De)magnetizer: Magnetizer for bolting and gripping tools, demagnetizer for tools Feeler gauge set: Protective handle, folding, blades tapering to a cone, of hardened spring steel Bit box: Drive adapter with magnetic bit locking, hexagon drive to DIN 3126 ISO 1173 - C 6.3, machine operated, phosphated, plastic box   Contents: R22150006 Socket set 1/4" in 1/3 foam module R22150000 Double-ended ring spanner in 1/3 foam module R22150018 Pliers set in 1/3 foam module R22150019 Hammer and chisel set in 1/3 foam module R22150009 Socket set 1/2" in 1/3 foam module R22150008 Ratchet and accessories 1/2” in the foam module R22250001 Ratchet wrench set and hexagon socket keys in 2/3 foam module R22150014 Screwdriver set in 1/3 foam module R22150015 Screwdriver set in 1/3 foam module R22150017 Circlip pliers set in 1/3 foam module R27200010 Clamp locking plier 10” 225 mm R33005031 Bit box 1/4" 32 pieces R38990000 (De)magnetizer R94420021 Digital measuring calliper R93200025 Utility knife with 5 spare blades 175 mm R94650013 Feeler gauge set R93160052 Half-round file 310 mm R94550003 Tape measure 3 m

Gedore red R21600072 Tool set BASIS in tool box 72pcs Features:Multifunction saw: Rotating saw blade and frame, hand protector, dual-material handle, delivered with HSS bi-metal saw blade (24 tpi) Spirit level: Smooth aluminium rectangular profile, two acrylic vials, measurement accuracy: +/- 0.5 mm/m, powder-coated, impact-resistant end cap Double open-ended spanner: To DIN 3110, ISO 3318, ISO 1085, ISO 10102, 15° jaw position, surface matt satin plate-chromed, chrome-vanadium steel Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge Combination pliers: To DIN ISO 5746, gripping zones for flat and round material, inductively hardened cutting edges, dual-material handle, chrome-vanadium steel Power side cutter: To DIN ISO 5749, high degree of cutting performance, inductively hardened, long cutting edges, dual-material handle, chrome-vanadium steel Pincer: To DIN ISO 9243, head ground, inductively hardened cutting edges, dipped handle covers, forged Tape measure: ABS dual-material housing, clip, nylon-coated tape, mm-graduation, with tape rewind and lock, magnetic stop, Accuracy Class II Blue pencil: Oval form 2C screwdriver: PZ slot and cross-slotted, acc. to DIN and VDE screwdriver slot and cross-slotted PH, VDE-insulated acc. to DIN EN 60900, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle Hexagon socket key: To DIN ISO 2936, hardened throughout, chrome-vanadium steel, phosphated, in holder Flat chisel: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated Phase tester: Max. 250 volt, black gun-metal tip, red plastic jacket, anti-slip handle surface, synthetic clip, to DIN 0680-6:1977-04 VDE Cable knife: VDE-insulated to DIN EN 60900, strong straight blade, straight cutting edge, protective cap, dual-material handle, hands-friendly transfer of force Half-round file: To DIN 7261, dual-material handle, hands-friendly transfer of force, hole for hanging up Utility knife: Blade 18 mm, synthetic housing, metal blade guide, one-handed operation, 5 spare blades (100mm long, 0.4mm thick), with sharpener Adjustable spanner: 15° jaw position, polished head with lasered scale, 40-50 HRC, chrome-vanadium steel, chrome-plated Bit box: Drive adapter with magnetic bit locking, hexagon drive to DIN 3126 ISO 1173 - C 6.3, machine operated, phosphated, plastic box Bit screwdriver: Dual-material handle, hex recess drive to DIN 3126 - D 6.3 (1/4") for bits, magnet, elongated hole in the handle, chrome-vanadium steel

Gedore red R21650057 Universal set SCHRAUBER in tool case, 57 pieces   Features: Socket wrench tools: Coupler in acc. with DIN 3120, ISO 1174, with ball locking device Square drive acc. to DIN 3120, ISO 1174, with ball retention groove 2C reversible ratchet, lever for reversible right and left hand operation, push button release, fine-toothed, oval head, dual-meterial handle, hands-friendliy transfer of force, for sockets Socket 1/2", hex, metric, short design based on DIN 3124, ISO 2725 Spark plug socket 1/2" with pressed-in holding rubber Spark plug socket 1/2" with pressed-in holding rubber an dadditional drive 24 mm Socket extenstion 1/2" Universal joint 1/2", joint bolted on, design to DIN 3123 - C12,5 For hand-operated bolting operations Chrome-vanadium-steel, matt satin chrome-plated Holding rail, for equipping with adaptors for 1/2" sockets, aluminium Combination spanner: To DIN 3113, Form A ISO 3318, ISO 7738, ring side angled 15° jaw position, surface matt satin, plate-chromed, chrome-vanadium steel Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge Combination pliers: To DIN ISO 5746, gripping zones for flat and round material, inductively hardened cutting edges, dual-material handle, chrome-vanadium steel Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, dual-material handle, chrome-vanadium steel 2C screwdriver: Slot and cross-slotted PH, to DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle Hexagon socket key: To DIN, hardened throughout, chrome-vanadium steel, phosphated, in holder Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated Phase tester: Max. 250 volt, 1-component handle, transparent plastic, metal clip Tape measure: ABS dual-material housing, clip, nylon-coated tape, mm-graduation, with tape rewind and lock, magnetic stop, Accuracy Class II

Gedore red R21650059 Tool set ALLROUND in tool case 59 pieces   Features: Combination spanner: To DIN 3113, Form A ISO 3318, ISO 7738, ring side angled 15° jaw position, surface matt satin, plate-chromed, chrome-vanadium steel Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge Combination pliers: To DIN ISO 5746, gripping zones for flat and round material, inductively hardened cutting edges, dual-material handle, chrome-vanadium steel Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, dual-material handle, chrome-vanadium steel 2C screwdriver: Slot and cross-slotted PH, PZ , to DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle Hexagon socket key: To DIN, hardened throughout, chrome-vanadium steel, phosphated, in holder Flat and cross-cut chisel: To DIN, cutting edge and head ground, impact end tempered, chrome-vanadium steel Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated Phase tester: Max. 250 volt, black gun-metal tip, red plastic jacket, anti-slip handle surface, synthetic clip, to DIN 0680-6:1977-04 Round and flat files: To DIN 7261, dual-material handle, hands-friendly transfer of force, hole for hanging up Adjustable spanner: 15° jaw position, polished head with lasered scale, 40-50 HRC, chrome-vanadium steel, chrome-plated Wood sectioned folding ruler Metric dual scale, Accuracy Class III, EC-design approval for continuous mm division, beech wood with through-riveted joints Carbide scriber: Pencil and carbide scriber in one, straight form, retractable nib, metal housing, attaching clip

Gedore red R21650072 Universal set BASIC in the tool case, 72 pieces   Features: Multifunction saw: Rotating saw blade and frame, hand protector, dual-material handle, delivered with HSS bi-metal saw blade (24 tpi) Spirit level: Smooth aluminium rectangular profile, two acrylic vials, measurement accuracy: +/- 0.5 mm/m, powder-coated, impact-resistant end cap Double open-ended spanner: To DIN 3110, ISO 3318, ISO 1085, ISO 10102, 15° jaw position, surface matt satin plate-chromed, chrome-vanadium steel Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge Combination pliers: To DIN ISO 5746, gripping zones for flat and round material, inductively hardened cutting edges, dual-material handle, chrome-vanadium steel Power side cutter: To DIN ISO 5749, high degree of cutting performance, inductively hardened, long cutting edges, dual-material handle, chrome-vanadium steel Pincer: To DIN ISO 9243, head ground, inductively hardened cutting edges, dipped handle covers, forged Tape measure: ABS dual-material housing, clip, nylon-coated tape, mm-graduation, with tape rewind and lock, magnetic stop, Accuracy Class II Blue pencil: Oval form 2C screwdriver: PZ slot and cross-slotted, acc. to DIN and VDE screwdriver slot and cross-slotted PH, VDE-insulated acc. to DIN EN 60900, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle Hexagon socket key: To DIN ISO 2936, hardened throughout, chrome-vanadium steel, phosphated, in holder Flat chisel: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated Phase tester: Max. 250 volt, black gun-metal tip, red plastic jacket, anti-slip handle surface, synthetic clip, to DIN 0680-6:1977-04 VDE Cable knife: VDE-insulated to DIN EN 60900, strong straight blade, straight cutting edge, protective cap, dual-material handle, hands-friendly transfer of force Half-round file: To DIN 7261, dual-material handle, hands-friendly transfer of force, hole for hanging up Utility knife: Blade 18 mm, synthetic housing, metal blade guide, one-handed operation, 5 spare blades (100mm long, 0.4mm thick), with sharpener Adjustable spanner: 15° jaw position, polished head with lasered scale, 40-50 HRC, chrome-vanadium steel, chrome-plated Bit box: Drive adapter with magnetic bit locking, hexagon drive to DIN 3126 ISO 1173 - C 6.3, machine operated, phosphated, plastic box Bit screwdriver: Dual-material handle, hex recess drive to DIN 3126 - D 6.3 (1/4") for bits, magnet, elongated hole in the handle, chrome-vanadium steel

Gedore red R21650108 Tool set ALL-IN in tool case 108pcs Features:Socket wrench tools: Coupler in acc. with DIN 3120, ISO 1174, with ball locking device Square drive acc. to DIN 3120, ISO 1174, with ball retention groove 2C reversible ratchet, lever for reversible right and left hand operation, push button release, fine-toothed, oval head, dual-meterial handle, hands-friendliy transfer of force, for sockets Socket 1/2", hex, metric, short design based on DIN 3124, ISO 2725 Socket extenstion Universal joint 1/2", joint bolted on, design to DIN 3123 - C12,5 For hand-operated bolting operations Chrome-vanadium-steel, matt satin chrome-plated Holding rail, for equipping with adaptors for 1/2" sockets, aluminium Ratchet wrench, metric: Based on DN 3113, ISO 3318, straight, 15° jaw position, surface matt satin plate-chromed, chrome-vanadium steel Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge Combination pliers: To DIN ISO 5746, gripping zones for flat and round material, inductively hardened cutting edges, dual-material handle, chrome-vanadium steel Power side cutter: To DIN ISO 5749, high degree of cutting performance, inductively hardened, long cutting edges, dual-material handle, chrome-vanadium steel Bent nose telephone pliers, straight: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, dual-material handle, chrome-vanadium steel Tape measure: ABS dual-material housing, clip, nylon-coated tape, mm-graduation, with tape rewind and lock, magnetic stop, Accuracy Class II 2C screwdriver: Slot and cross-slotted PH, to DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle Hexagon socket key: To DIN ISO 2936, hardened throughout, chrome-vanadium steel, phosphated, in holder Flat chisel: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel Pin punch, octagonal: To DIN 6450, impact end annealed, chrome-vanadium steel Utility knife: Blade 18 mm, synthetic housing, metal blade guide, one-handed operation, 5 spare blades (100mm long, 0.4mm thick), with sharpener Bit box: Drive adapter with magnetic bit locking, hexagon drive to DIN 3126 ISO 1173 - C 6.3, machine operated, phosphated, plastic box Bit screwdriver: Dual-material handle, hex recess drive to DIN 3126 - D 6.3 (1/4") for bits, magnet, elongated hole in the handle, chrome-vanadium steel