Kukko 30-1+S 3-Arm Universal Abzieher 90 X 100 mm mit Abzughaken für enge Räume + Schnellverstellung
Product number:
1933614
Manufacturer no.:
30-1+S
EAN:
4021176756894
Weight (kg):
1.46
Product information "Kukko 30-1+S 3-Arm Universal Abzieher 90 X 100 mm mit Abzughaken für enge Räume + Schnellverstellung"
Kukko Universal 3-jaw puller with narrow, quick adjusting jaws
For removing bearings, gears, discs, etc. for tight or difficult-to-access spaces.
Description
- Thin pulling hook with quick adjusting capability quick adjust.
- Parallel pulling hooks in every position, even with full load.
- Pulling hooks with infinitely variable adjustment on the cross-beam.
- Optimal adjustment of the spindle to the shaft with 2-sided spindle tip (ball and tip).
- Mechanical pressure screw.
- Milled thread treated with special coating.
- The three-arm design ensures that the load is distributed evenly and that the part to be removed is held securely.
- If there is not adequate free space around the part to be removed, we recommend using a 2-jaw puller series 20+S for optimal force distribution.
Advantage
- The thin pulling hooks are suitable for narrow, difficult-to-access locations.
- A manual adjustment knurl allows rapid loosening and adjusting of the extractor jaws on the cross-beam without using a wrench.
- Can be installed on various pulling hooks and variable reach thanks to jaw extensions.
- Turning the pulling hooks enables them to be used both internally and externally.
- Suitable for pulling asymmetric workpieces.
- Spindle head band prevents the wrench from slipping off.
- Almost all components available as replacement parts, time-saving order process thanks to numbering system.
- Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.
KUKKO quality standards
- Quality made in Germany.
- Strong design, high performance and long service life.
- Self-healing corrosion protection KUKKoating for galvanized parts (WITHOUT chrom VI).
- Safety label to ensure protection of intellectual property.
- A tube of KUKKO special grease included for pressure spindle.
Series 30+S
| Item no. | EAN 4021176 |
Clamping reach outside mm |
Clamping reach outside inch |
Clamping depth mm |
Clamping depth inch |
Clamping reach inside mm |
Clamping reach inside inch |
Hex drive size mm |
Max. tonne t |
Max. torque Nm |
Weight kg |
| 30-1+S | 756894 | 90 | 3 1/2 | 100 | 3 7/8 | 70 - 140 | 2 3/4 - 5 1/2 | 17 | 3 | 40 | 1.1 |
| 30-10+S | 756979 | 130 | 5 1/8 | 100 | 3 7/8 | 70 - 180 | 2 3/4 - 7 1/8 | 17 | 3 | 40 | 1.54 |
| 30-2+S | 757051 | 160 | 6 3/8 | 150 | 5 7/8 | 100 - 220 | 3 7/8 - 8 5/8 | 22 | 5 | 120 | 3.785 |
| 30-20+S | 757136 | 200 | 7 7/8 | 150 | 5 7/8 | 100 - 260 | 3 7/8 - 10 1/4 | 22 | 5 | 120 | 4.12 |
| 30-3+S | 757211 | 250 | 9 7/8 | 200 | 7 7/8 | 180 - 340 | 7 1/8 - 13 3/8 | 27 | 13,5 | 390 | 9.3 |
Toolaro.gprs.title
Toolaro.gprs.docs_and_sheets
Toolaro.gprs.productsafety
Toolaro.gprs.manufacturer
KUKKO Werkzeugfabrik
Kleinbongartz & Kaiser oHG
Heinrich-Hertz-Straße 5
40721 Hilden
Germany
info@kukko.com