Kukko 30-10-S-T 3-Arm Univ. Puller 120X100 Mm With Claws F. Confined-Spaces
Product number:
1933626
Manufacturer no.:
30-10-S-T
EAN:
4021176321696
Weight (kg):
1.48
Product information "Kukko 30-10-S-T 3-Arm Univ. Puller 120X100 Mm With Claws F. Confined-Spaces "
Kukko Universal 3-jaw puller with extremely narrow jaws
For removing gears, bearings, sprockets, synchronizer bodies, etc., in tight or difficult-to-access spaces.
Description
- Extra-thin trapezoidal pulling hooks.
- Parallel pulling hooks in every position, even with full load.
- Pulling hooks with infinitely variable adjustment on the cross-beam.
- Optimal adjustment of the spindle to the shaft with 2-sided spindle tip (ball and tip).
- Mechanical pressure screw.
- Milled thread treated with special coating.
- The three-arm design ensures that the load is distributed evenly and that the part to be removed is held securely.
- If there is not adequate free space around the part to be removed, we recommend using a 2-jaw puller series 20-S-T for optimal force distribution.
Advantage
- The narrow, trapezoidal pulling jaws are suitable for extremely narrow, difficult to access places.
- Can be installed on various pulling hooks and variable reach thanks to jaw extensions.
- Turning the pulling hooks enables them to be used both internally and externally.
- Suitable for pulling asymmetric workpieces.
- Spindle head band prevents the wrench from slipping off.
- Almost all components available as replacement parts, time-saving order process thanks to numbering system.
- Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.
KUKKO quality standards
- Quality made in Germany.
- Strong design, high performance and long service life.
- Self-healing corrosion protection KUKKoating for galvanized parts (WITHOUT chrom VI).
- Safety label to ensure protection of intellectual property.
- A tube of KUKKO special grease included for pressure spindle.
Series 30-S-T
| Item no. | EAN 4021176 |
Clamping reach outside mm |
Clamping reach outside inch |
Clamping depth mm |
Clamping depth inch |
Clamping reach inside mm |
Clamping reach inside inch |
Hex drive size mm |
Max. tonne t |
Max. torque Nm |
Weight kg |
| 30-1-S-T | 321689 | 90 | 3 1/2 | 100 | 3 7/8 | 70 - 140 | 2 3/4 - 5 1/2 | 17 | 3 | 40 | 1.335 |
| 30-10-S-T | 321696 | 130 | 5 1/8 | 100 | 3 7/8 | 70 - 180 | 2 3/4 - 7 1/8 | 17 | 3 | 40 | 1.475 |
Toolaro.gprs.title
Toolaro.gprs.docs_and_sheets
Toolaro.gprs.productsafety
Toolaro.gprs.manufacturer
KUKKO Werkzeugfabrik
Kleinbongartz & Kaiser oHG
Heinrich-Hertz-Straße 5
40721 Hilden
Germany
info@kukko.com