Skip to main content Skip to search Skip to main navigation
  +49 241 559713   Mon.-Thurs. 9 am-5 pm, Fri. 9 am-3 pm        30 years experience        Certified shop        Fast shipping

Proxxon 29805 Cordless Long neck angle unit LWB/A

Product information "Proxxon 29805 Cordless Long neck angle unit LWB/A "

PROXXON 89805 Cordless Long neck angle milling/drilling unit LWB/A

 

Strong problem solvers for craft and industry! Made in Europe.

 

Features:

  • For drilling, milling and polishing in tough-to-reach areas. Ideal for tile cutting!
  • With a set of gears running on several ball bearings in a stable, die-cast aluminium housing head.
  • Main housing is made of glass-fibre reinforced POLYAMIDE.
  • With a special balanced, powerful, quiet and long-lasting DC motor. Infinitely variable rpm (full wave electronics).
With MICROMOT hardened steel collets:
1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2mm
 
  • Storage case of high-grade polypropylene. Attractive design, very sturdy and large enough to put the machine back in the case after completing work, without having to "fumble".
  • A label on the side identifies the contents.
 

MICROMOT steel collets:

  • are hardened and therefore have high, consistent spring force.
  • They retain the required precision even after prolonged use
    (not comparable with non-hardened, 4-slot collets or those made of brass or aluminum)
  • Due to the 3-slot design, which is significantly more difficult to manufacture than the 4-slot version, a better seat is created
    This is important for precise centering of shafts with small diameters.
 

Technical features:

  • Voltage: 10,8 V
  • Rotation speed: 5.000 - 16.000/min
  • Length: 320 mm
  • Weight: ca. 800 g (with battery)

 

Product Safety and Downloads

Documents and datasheets

Product safety information

Manufacturer

PROXXON S.A.
Härebierg 6-10
6868 Wecker
Luxembourg
i@proxxon.com

Zubehör

Proxxon 29890 Rapid battery charger LG/A
Proxxon 29880 Rapid battery charger LG/A   Features: Charges the PROXXON lithium-ion battery type LG/A 2 (10.8V, 2.6Ah) in one hour. With integrated temperature control and charge level-/function control-LED signal light: Yellow = charging, Green = charged. Regeneration function also enables recharge of fully discharged batteries provided these are still intact. Additional maintenance mode charging ensures that the battery charger remains fully charged.   Technical features: Input 100 - 240V. 50/60Hz. Output 12.6V, 2A. Insulated to class 2.

€35.95*
Proxxon 29896 Lithium-ion battery Li/A2
Proxxon 29896 Lithium-ion battery Li/A2   Features: For long and durably powerful operation of our new MICROMOT battery-powered tools. With integrated temperature control for safe operation.   Technical features: Voltage 10.8V. Capacity 2.6Ah. Length 85mm. Weight 180g.

€39.95*
Proxxon 28809 Aluminium oxide cutting discs w.r.
PROXXONcolor> 28809 Aluminium oxide cutting discs with reinforcement (22 mm), 50 pieces + 1 Arbor Features: The cutting discs are available in Ø 22 x 0.8mm and Ø 38 x 1.0mm Nearly unbreakable, making them usable to remove stock Will cut alloyed, standard and stainless steels, non-ferrous metals and even wood and plastic Arbor shaft of Ø 2.35mm

Content: 50 pcs (€0.29* / 1 pcs)

€14.50*
Proxxon 28808 Aluminium oxide cutting discs w.r.
PROXXONcolor> 28808 Aluminium oxide cutting discs with reinforcement (22 mm), 10 pieces + 1 Arbor Features: The cutting discs are available in Ø 22 x 0.8mm and Ø 38 x 1.0mm Nearly unbreakable, making them usable to remove stock Will cut alloyed, standard and stainless steels, non-ferrous metals and even wood and plastic Arbor shaft of Ø 2.35mm

Content: 10 pcs (€0.43* / 1 pcs)

€4.25*
Proxxon 28810 Corundum cutting discs (22 mm),10p.
PROXXONcolor> 28810 Corundum cutting discs (22 mm), 10 pieces + 1 Arbor Features: Discs made of a special compound of diameter 22 x 0.7mm Used to part alloys and metals, stainless steels and nonferrous metals Can also be used for cutting wood and plastic Shaft of Ø 2.35mm

Content: 10 pcs (€0.27* / 1 pcs)

€2.70*
Proxxon 28812 Corundum cutting discs (22 mm),50p.
PROXXONcolor> 28812 Corundum cutting discs (22 mm), 50 pieces + 1 Arbor Features: Discs made of a special compound of diameter 22 x 0.7mm Used to part alloys and metals, stainless steels and nonferrous metals Can also be used for cutting wood and plastic Shaft of Ø 2.35mm

Content: 50 pcs (€0.14* / 1 pcs)

€6.90*
Proxxon 28815 Spare arbors, 5 pieces
PROXXONcolor> 28815 Spare arbors, 5 pieces Features: Shaft 2.35 x 44mm

Content: 5 pcs (€0.83* / 1 pcs)

€4.15*
Proxxon 28818 Aluminium oxide cutting discs w.r.
PROXXONcolor> 28818 Aluminium oxide cutting discs with reinforcement (38 mm), 5 pieces + 1 Arbor Features: The cutting discs are available in Ø 22 x 0.8mm and Ø 38 x 1.0mm Nearly unbreakable, making them usable to remove stock Will cut alloyed, standard and stainless steels, non-ferrous metals and even wood and plastic Arbor shaft of Ø 2.35mm

Content: 5 pcs (€0.85* / 1 pcs)

€4.25*
Proxxon 28819 Aluminium oxide cutting discs w.r.
PROXXON 28819 Aluminium oxide cutting discs with reinforcement (38 mm), 20 pieces Features: The cutting discs are available in Ø 22 x 0.8mm and Ø 38 x 1.0mm Nearly unbreakable, making them usable to remove stock Will cut alloyed, standard and stainless steels, non-ferrous metals and even wood and plastic

Content: 20 pcs (€0.49* / 1 pcs)

€9.80*
Proxxon 28820 Corundum cutting discs (38 mm),5p.
PROXXONcolor> 28820 Corundum cutting discs (38 mm), 5 pieces + 1 Arbor Features: Discs made of a special compound of diameter 22 or 38 x 0.7mm Used to part alloys and metals, stainless steels and nonferrous metals Can also be used for cutting wood and plastic Shaft of Ø 2.35mm

Content: 5 pcs (€0.55* / 1 pcs)

€2.75*
Proxxon 28821 Corundum cutting discs (38 mm),25 p.
PROXXONcolor> 28821 Corundum cutting discs (38 mm), 25 pieces + 1 Arbor Features: Discs made of a special compound of diameter 22 or 38 x 0.7mm Used to part alloys and metals, stainless steels and nonferrous metals Can also be used for cutting wood and plastic Shaft of Ø 2.35mm

Content: 25 pcs (€0.26* / 1 pcs)

€6.50*
Proxxon 28830 Cutting blades made of spring steel
PROXXONcolor> 28830 Cutting blades made of spring steel, 1 piece each: 16, 19, 22 mm + 1 Arbor Features: 0.1mm thick For plastic, wood and nonferrous metal Shaft Ø 2.35 For freehand work, we recommend using the protective device 28 944

€3.95*
Proxxon 28840 Diamond cutting discs (20 mm)
PROXXONcolor> 28840 Diamond cutting discs (20 mm) + Arbor Features: Only 0.6mm thick For cutting and sanding of porcelain, ceramics, glass fibre boards, plastic and nonferrous metals Shaft of Ø 2.35mm

€4.49*
Proxxon 28842 Diamond cutting discs (38 mm)
PROXXONcolor> 28842 Diamond cutting discs (38 mm) + Arbor Features: Only 0.6mm thick For cutting and sanding of porcelain, ceramics, glass fibre boards, plastic and nonferrous metals Shaft of Ø 2.35mm

€5.95*
Proxxon 28844 Diamond-coated cutting discs w.c.h.
PROXXONcolor> 28844 Diamond-coated cutting discs with cooling holes (20 mm) + 1 Arbor Features: For cutting, grinding and deburring Same application as described on the left Less heating up due to cooling holes No burn marks! Shaft ø 2.35

€5.95*
Proxxon 28846 Diamond-coated cutting discs w.c.h.
PROXXONcolor> 28846 Diamond-coated cutting discs with cooling holes (38 mm) + 1 Arbor Features: For cutting, grinding and deburring Same application as described on the left Less heating up due to cooling holes No burn marks! Shaft ø 2.35

€6.95*
Proxxon 28838 Tungsten carbide cutting disc
Proxxon 28838 Tungsten carbide cutting disc   Features: Tungsten carbide cutting disc. Thickness approx. 2mm. For cutting and profiling wood, CFK, GRP, rubber, silicone. Cooling holes reduce heating up. Shaft Ø 2.35.

€4.95*
Proxxon 28285 10-piece complete polishing set
PROXXONcolor> 28285 10-piece complete polishing set For polishing metal, glass, precious metals, porcelain and plastic Includes 2.35 x 44mm arbor Scope of delivery: 3 felt polishing bits (cylinder, cone and wheel shapes) 3 silicon polishing bits (bullet, cylinder and disc shape) cotton polishing disc chamois buffing wheel and polishing paste

€14.25*
Proxxon 28910 Modeller's set, 13 pieces
PROXXONcolor> 28910 Modeller's set, 13 pieces For cutting, grading, milling, polishing and drilling Scope of Delivery: One fine milling bit each of 2.3mm ball shape and cylinder shape One white corundum grinding bit each of 5.0mm ball shape and cone shape One micro drill each of 1.0mm and 2.3mm 5 separating discs ø 22mm One ø 22mm saw blade and ø 2.35mm arbor

€13.50*
Proxxon 28911 Jewellery processing set, 7-pieces
PROXXON 28911 Jewellery processing set, 7-pieces   Scope of delivery: 1 ball end mill each Ø 3.0 - 4.0 and 5.0 mm with hole (for milling out settings for beads etc.) 1 double cone cutter for milling the seat of stones with Ø 1.4 mm 1 cup cutter 1.0 and 1.4 mm each (for rounding off wires etc.) 1 carbide spear drill bit 1.0 mm All shanks Ø 2.35 mm.   Application: For jewellers and goldsmiths

€23.51*
Proxxon 28920 4-piece glass working set
PROXXONcolor> 28920 4-piece glass working set Scope of delivery: 2 diamond grinding bits and 2 silicon carbide grinding bits, for engraving, grinding or frosting glass Diamond bit 1: ball ø 1.0mm Diamond bit 2: ball ø 1.8mm Silicon carbide bit cone 3/2 x 5mm Bullet 2/2.5 x 7mm All shafts ø 2.35mm.

€4.65*
Proxxon 28255 Diamond twist drills (0,8 & 1,2 mm)
PROXXONcolor> 28255 Diamond twist drills (0,8 & 1,2 mm) Features: For drilling holes in (semi) precious stones, etc. Shaft Ø 2.35mm

€7.90*
Proxxon 28852 HSS drill bits 0,8 mm, 3 pieces
PROXXONcolor> 28852 HSS drill bits 0,8 mm, 3 pieces Features: Selected steel quality Purpose-made stable construction with high concentricity Shaft and bit are manufactured from a one-piece blank High hardness for optimum life expectancy and elasticity For drilling metal, non-ferrous metals, plastic, PC cards and wood Work speeds: soft materials approx. 8,000rpm, hard materials approx. 3,000rpm Ø shanks 2.35mm

Content: 3 pcs (€1.32* / 1 pcs)

€3.95*
Proxxon 28854 HSS drill bits 1,0 mm, 3 pieces
PROXXONcolor> 28854 HSS drill bits 1,0 mm, 3 pieces Features: Selected steel quality Purpose-made stable construction with high concentricity Shaft and bit are manufactured from a one-piece blank High hardness for optimum life expectancy and elasticity For drilling metal, non-ferrous metals, plastic, PC cards and wood Work speeds: soft materials approx. 8,000rpm, hard materials approx. 3,000rpm Ø shanks 2.35mm

Content: 3 pcs (€1.32* / 1 pcs)

€3.95*
Proxxon 28856 HSS drill bits 1,2 mm, 3 pieces
PROXXONcolor> 28856 HSS drill bits 1,2 mm, 3 pieces Features: Selected steel quality Purpose-made stable construction with high concentricity Shaft and bit are manufactured from a one-piece blank High hardness for optimum life expectancy and elasticity For drilling metal, non-ferrous metals, plastic, PC cards and wood Work speeds: soft materials approx. 8,000rpm, hard materials approx. 3,000rpm Ø shanks 2.35mm

Content: 3 pcs (€1.32* / 1 pcs)

€3.95*
Proxxon 28858 HSS drill bits 1,6 mm, 3 pieces
PROXXONcolor> 28858 HSS drill bits 1,6 mm, 3 pieces Features: Selected steel quality Purpose-made stable construction with high concentricity Shaft and bit are manufactured from a one-piece blank High hardness for optimum life expectancy and elasticity For drilling metal, non-ferrous metals, plastic, PC cards and wood Work speeds: soft materials approx. 8,000rpm, hard materials approx. 3,000rpm Ø shanks 2.35mm

Content: 3 pcs (€1.32* / 1 pcs)

€3.95*
Proxxon 28864 HSS drill bits 0,5 mm, 3 pieces
PROXXONcolor> 28864 HSS drill bits 0,5 mm, 3 pieces Features: Selected steel quality Purpose-made stable construction with high concentricity Shaft and bit are manufactured from a one-piece blank High hardness for optimum life expectancy and elasticity For drilling metal, non-ferrous metals, plastic, PC cards and wood Work speeds: soft materials approx. 8,000rpm, hard materials approx. 3,000rpm Ø shanks 2.35mm

Content: 3 pcs (€1.32* / 1 pcs)

€3.95*
Proxxon 28874 HSS twist drill set to DIN 338
PROXXONcolor> 28874 HSS twist drill set to DIN 338 (0,3 - 3,2 mm) Features: For drilling non-ferrous metals, steel, high-quality steel 10 pieces: Ø 0,3 - 0,5 - 0,8 - 1,0 - 1,2 - 1,5 - 2,0 - 2,5 - 3,0 - 3,2 mm

€4.75*
Proxxon 28876 HSS twist drill set with centring p.
PROXXONcolor> 28876 HSS twist drill set with centring pin (1,5 bis 4,0 mm) Features: For precision tapping of wood and plastics; also non-ferrous metal, steel and stainless steel sheets Titanium coating reduces friction and increases service life Shaft ø 3mm 6-piece set: Ø 1,5 - 2,0 - 2,5 - 3,0 - 3,5 - 4,0 mm

€13.90*