Fertan Underbody protection wax, 1 Liter Features: Fertan UBS 240 is an underbody protection wax for long-term protection PVC-compatible, in a transparent to slightly amber color. The "amber effect" is reinforced, the more of the product is being applied. Fertan UBS 240 is an ideal protective wax-based product, especially for underbodies of motor vehicles Can be used even in extreme conditions to protect over long term. Fertan can also be applied to lacquered underbodies. Highly flammable Irritant Environmental damaging

Fertan Body protection, grey, 1 l   FERTAN bodywork and stone guard form an elastic layer with a fine-grained structure, which provides a resistant protection against stones, road debris and water. 1 liter standard can Fast drying Overpaintable Colour: grey Anti drone effect   Features: FERTAN body and stone guard protects against petrol, oil, water and salt. In addition, the product has excellent damping and sound absorbing properties. The product is made of synthetic resin and contains no bitumen or tar constituents. It can be over-painted with all common acrylic paints. Particularly good adhesion to steel, stainless steel, galvanized steel, aluminium  and polyester laminates. The 1 litre containers have a standard 38mm thread for connection to a underbody gun.   Application: Preparation of the substrate for optimal adhesion: Shake well before use. Before applying, clean and degrease the surface, eg FERTAN Silcone Remover. Cover areas and parts that are not to be coated. eg brakes, exhaust, catalytic converter, ect.   Pretreat surfaces: Steel: degrease and if necessary grind. Galvanized sheets and Aluminium: matt with abrasive wool and degrease. Stainless steel: degrease. Polyester laminates: degrease, sand with sandpaper P80 - P120 and degrease again. When applied directly to steel, a primer is recommended. Processing pressure and nozzle Apply with spray gun, nozzle approx. 4 mm and 2-4 bar working pressure. Lower pressure for an increased structure on the surface.   Overpainting: 60 minutes after application at approx. 20 ° C at the earliest.   Theoretical consumption: 1 liter at 100 μm thickness sufficient for approx. 3-4 m² area.   Storage: Store in dry and cool room, avoid direct sunlight. Protect from ignition and heat sources. Can be stored at 20 ° C for approx. 2 years in the original unopened container.  

Fertan HT Cavity Protection Wax, 1 Litre   FERTAN cavity protection wax was developed for the preservation of car cavities based on wax.   Features: 1 litre normdose for the end protection of cavities, e. g. in car bodies The composition of the product allows easy processing without the product flowing out of the cavities. Due to the presence of resins, an optimal adhesion is achieved, even on vertical surfaces, etc. HT wax remains very soft and thus obtains the property of automatically closing small cracks in the coating even after years. for many years successful: in the restoration of vintage cars in the restoration of new motor vehicles Coating of industrial structures   Processing: Shake well before use. FERTAN cavity protection Insert wax into the cavities by means of a cavity gun with 360° nozzle. Use the boreholes installed by the vehicle manufacturer or, if necessary, install new boreholes. Apply wax to the edges of the holes. FERTAN cavity protection Wax does not drip. Remove any splashes with test petrol. Processing temperature: The optimum processing temperature and the temperature of the body should be min. 20°C. For restorations and post-treatment: Apply wax 24 hours after rust removal by FERTAN rust converters. Please note the processing instructions for the rust converter. After rust removal and before application of cavity protective wax, pre-treat the welds and sheet metal overlaps with a layer of PREWAX pre-treatment wax, a seam-penetrating protective wax with extreme creepability. Then apply cavity protection wax in several thin layers, staggered by 12-48 hours to compensate for shrinkage cracks. Dry season: At + 20° C: approx. 5 hours Consumption: approx. 5 litres canister for a medium class passenger car Processing pressure: cavity suction cup gun with 360° nozzle approx. 6 – 9 bar cavity pressure cup gun with 360° nozzle approx. 3 – 4. 5 bar  

Fertan Body protection, black, 1 l   FERTAN bodywork and stone guard form an elastic layer with a fine-grained structure, which provides a resistant protection against stones, road debris and water. 1 liter standard can Fast drying Overpaintable Colour: black Anti drone effect   Features: FERTAN body and stone guard protects against petrol, oil, water and salt. In addition, the product has excellent damping and sound absorbing properties. The product is made of synthetic resin and contains no bitumen or tar constituents. It can be over-painted with all common acrylic paints. Particularly good adhesion to steel, stainless steel, galvanized steel, aluminium  and polyester laminates. The 1 litre containers have a standard 38mm thread for connection to a underbody gun.   Application: Preparation of the substrate for optimal adhesion: Shake well before use. Before applying, clean and degrease the surface, eg FERTAN Silcone Remover. Cover areas and parts that are not to be coated. eg brakes, exhaust, catalytic converter, ect.   Pretreat surfaces: Steel: degrease and if necessary grind. Galvanized sheets and Aluminium: matt with abrasive wool and degrease. Stainless steel: degrease. Polyester laminates: degrease, sand with sandpaper P80 - P120 and degrease again. When applied directly to steel, a primer is recommended. Processing pressure and nozzle Apply with spray gun, nozzle approx. 4 mm and 2-4 bar working pressure. Lower pressure for an increased structure on the surface.   Overpainting: 60 minutes after application at approx. 20 ° C at the earliest.   Theoretical consumption: 1 liter at 100 μm thickness sufficient for approx. 3-4 m² area.   Storage: Store in dry and cool room, avoid direct sunlight. Protect from ignition and heat sources. Can be stored at 20 ° C for approx. 2 years in the original unopened container.  

BGS 9406 Plastic Plug Assortment, 58 pcs. Features:BGS 9406 Plastic Plug Assortment, 58 pcs.for closing the following bore sizes:10 plugs Ø 10.0 mm10 plugs Ø 13.4 mm10 plugs Ø 13.5 mm8 plugs Ø 19.4 mm10 plugs Ø 19.5 mm10 plugs Ø 22.2 mmin assortment box Technical features:Gross weight: 140 gPackaging suitable for wall hanging: YesEAN: 4026947094069