Branth gloss additive for "3 in 1"   Features: Gloss Additive increases the gloss level of Brantho-Korrux "3 in 1" by approx. 20 % (according to NCS). The opacity is slightly reduced, the drying time slightly extended. The contents of this can (750 ml) are mixed with 5 liters of Brantho-Korrux "3 in 1". "3 in 1" hardener concentrate can also be used if desired. Do not use for effect colors 9006, 9007, 601 and similar. Technical data in short form for comparison:      Brantho-Korrux   Top coats 3in1 Nitrofest 2-Kompo Eco-Base   S-Glasur Robust-paint Yield - caulculated 30 my 17,3 m² 16,6 m² 13,3 m² 13,9 m² 18,3 m² 16,8 m² - practical 6 m² 6 m² 4 m² 5 m² 8 m² 8 m² Drying times 20°C - dust-dry 25 Min. 10 Min. 20 Min. 15 Min. 75 Min. 20 Min. - dry to handle 100 Min. 60 Min. 40 Min. 40 Min. 6 Std. 100 Min. - completely dried 10 Hours. 14 Hours. 8 Hours. 16 Hours. 36 Hours. 10 Hours. - stackable 72 Hours. 16 Hours. 16 Hours. 6 Hours. 2 Days 3 Days - 20 Min./60°C stackable 216 Hours. 45 Min. 1 Hour. 60 Min. 1 Day 5 Days EU-VOC-legislation (g/l) <400 <420 <380 <60 <350 <420   Information on the best-before date: The best-before date on the paint cans indicates the minimum shelf life guaranteed by Branth for originally sealed cans when stored in a cool (10-20°C) and dry place.   The best-before date is NOT an expiration date!   Unter den Under the conditions described, the paint can generally be used for a further 5 years without complaint. The date given should help you to use up older cans from your paint shelf first. As long as the paint can be stirred perfectly and is homogeneous, it can be used without any problems.   Brantho-Korrux is also available in larger quantities within 2 days, regardless of the quantity currently available.

Branth Slide-Stop additive 750 ml slide granulate for paint coating   Features: Slide-Stop additive Slide granules for paint coating Suitable for Brantho-Korrux "3 in 1", "2-Kompo", "2K-Durasolid" and others. Recommended addition quantity: 750 ml container of Slide-Stop additive to 5 liters of paint. Suitable for 25-40 m² area. The dry, granular material becomes largely neutral in color after mixing. Stir into the paint before applying, stirring occasionally.   Recommendations: First prime without anti-slip granules or apply the intermediate coat. Stir Slide-Stop additive into the liquid paint in the last coat immediately before application. Easy to apply with a brush or roller. Spray application is only possible with a suitable device. If an additional top coat is required, please dilute. Evaluation of slip resistance Tested in accordance with DIN 51130 "Determination of anti-slip properties - Workrooms and work areas with an increased risk of slipping" and BGR 181 "Code of practice for floors in workrooms and work areas with a risk of slipping". Slip resistance rating group: R11 Surfaces were tested with Brantho-Korrux "2-Kompo" and Brantho-Korrux "3 in 1", each with 750 ml Slide-Stop additive and 5 liters (6 kg) of paint. Bewertung der Rutschhemmung Geprüft nach DIN 51130 "Bestimmung der rutschemmenden Eigenschaften - Arbeitsräume und Arbeitsbereiche mit erhöhter Rutschgefahr" und BGR 181 "Merkblatt für Fußböden in Arbeitsräumen und Arbeitsbereichen mit Rutschgefahr". Bewertungsgruppe der Rutschhemmung: R11 Geprüft wurden Flächen mit Brantho-Korrux "2-Kompo" und Brantho-Korrux "3 in 1" jeweils mit 750 ml Slide-Stop-Additiv und 5 Liter (6 kg) Farbe.   Information on the best-before date: The best-before date on the paint cans indicates the minimum shelf life guaranteed by Branth for originally sealed cans when stored in a cool (10-20°C) and dry place.   The best-before date is NOT an expiration date!   Under the conditions described, the paint can generally be used for a further 5 years without complaint. The date given should help you to use up older cans from your paint shelf first. As long as the paint can be stirred perfectly and is homogeneous, it can be used without any problems.   Brantho-Korrux is also available in larger quantities within 2 days, regardless of the quantity currently available.  

Brantho-Korrux "3 in 1" in 0,75 L Can Rust Prevention - Metal Protection- Maintenance Paint   Features: semi-gloss coating, in over 60 RAL colours directly available reduced labour cost due to superior hiding power reduced material consumption due to high solids long lifetime expectancy due to excellent corrosion resistance fewer official conditions due to optimal environmental acceptance   Areas of application: Protection against corrision of constructions, machines and transport vehicles made of iron, steel, stainless steel, aluminium, and other non-ferric materials, hard plastics etc. in rural, urban, industrial and maritime areas. As a protective coating for new construction or maintenance, both primer and topcoar, as a primer for 1-component finishes and most 2-component finishes. Ideal fpr constructions built from several types of materials. For winter road clearence equipemt, sea containers, high-tension towers, lorry xhassis's, building equipment, bridges, cranes, vessels, boats, cladding (both coated or bare), railway stations, platform structures, fences, gates, producting halls, pipelines, storage tanks, gutters, cooling equipemt and many other objects. Approved as primer cpat, intermediate coat and top coat for steel-constructions and -equipments.   Coverage pays: Theoretically 1 litre is sufficient for 17.3 m² at a dry film thickness of 30 μm. Practically we recommend a higher d.f.t. for optimal corrosion resistance. 1 litre then will cover ca. 6 m². Suitable for brush, roller and spray application   Technical data in short form for comparison:      Brantho-Korrux   Top coats 3in1 Nitrofest 2-Kompo Eco-Base   S-Glasur Robust-paint Yield - caulculated 30 my 17,3 m² 16,6 m² 13,3 m² 13,9 m² 18,3 m² 16,8 m² - practical 6 m² 6 m² 4 m² 5 m² 8 m² 8 m² Drying times 20°C - dust-dry 25 Min. 10 Min. 20 Min. 15 Min. 75 Min. 20 Min. - dry to handle 100 Min. 60 Min. 40 Min. 40 Min. 6 Std. 100 Min. - completely dried 10 Hours. 14 Hours. 8 Hours. 16 Hours. 36 Hours. 10 Hours. - stackable 72 Hours. 16 Hours. 16 Hours. 6 Hours. 2 Days 3 Days - 20 Min./60°C stackable 216 Hours. 45 Min. 1 Hour. 60 Min. 1 Day 5 Days EU-VOC-legislation (g/l) <400 <420 <380 <60 <350 <420   Expected duration of protection (DIN EN ISO 12944-6): The longest duration of protection (over 15 years) will be achieved with three coats (each 80 m). At moderate corrosion stress two coats will be sufficient for a period of protection to the above standard for 15 years. For more information check out our downloads.   Other Brantho-Korrux-coating offers: APS: Branth's Adhesion Primer Special, flat primer for all sorts of substrates, aheres very well to zinc, aluminium, various "2-Kompo": for all metals, primer/topcoat, universal recoatable, rapid curing (20° C), semi-gloss Robust-Lack: glossy finish, flexible, fast drying, preferably brush or spray application Nitrofest: Flat, easy to sand, dries very rapidly, for steel and also manually prepared   Within 2 days Brantho-Korrux will be available in larger quantities  

Brantho-Korrux "3 in 1" in 4,5 L Can, colorless Rust Prevention - Metal Protection- Maintenance Paint   Features: Colorless, without color pigments Silk-matt, greyish Reduced labour cost due to superior hiding power Reduced material consumption due to high solids Long lifetime expectancy due to excellent corrosion resistance Fewer official conditions due to optimal environmental acceptance   Areas of application: Protection against corrision of constructions, machines and transport vehicles made of iron, steel, stainless steel, aluminium, and other non-ferric materials, hard plastics etc. in rural, urban, industrial and maritime areas. As a protective coating for new construction or maintenance, both primer and topcoar, as a primer for 1-component finishes and most 2-component finishes. Ideal fpr constructions built from several types of materials. For winter road clearence equipemt, sea containers, high-tension towers, lorry xhassis's, building equipment, bridges, cranes, vessels, boats, cladding (both coated or bare), railway stations, platform structures, fences, gates, producting halls, pipelines, storage tanks, gutters, cooling equipemt and many other objects. Approved as primer cpat, intermediate coat and top coat for steel-constructions and -equipments.   Coverage pays: Theoretically 1 litre is sufficient for 17.3 m² at a dry film thickness of 30 μm. Practically we recommend a higher d.f.t. for optimal corrosion resistance. 1 litre then will cover ca. 6 m². Suitable for brush, roller and spray application   Technical data in short form for comparison:      Brantho-Korrux   Top coats 3in1 Nitrofest 2-Kompo Eco-Base   S-Glasur Robust-paint Yield - caulculated 30 my 17,3 m² 16,6 m² 13,3 m² 13,9 m² 18,3 m² 16,8 m² - practical 6 m² 6 m² 4 m² 5 m² 8 m² 8 m² Drying times 20°C - dust-dry 25 Min. 10 Min. 20 Min. 15 Min. 75 Min. 20 Min. - dry to handle 100 Min. 60 Min. 40 Min. 40 Min. 6 Std. 100 Min. - completely dried 10 Hours. 14 Hours. 8 Hours. 16 Hours. 36 Hours. 10 Hours. - stackable 72 Hours. 16 Hours. 16 Hours. 6 Hours. 2 Days 3 Days - 20 Min./60°C stackable 216 Hours. 45 Min. 1 Hour. 60 Min. 1 Day 5 Days EU-VOC-legislation (g/l) <400 <420 <380 <60 <350 <420   Expected duration of protection (DIN EN ISO 12944-6): The longest duration of protection (over 15 years) will be achieved with three coats (each 80 m). At moderate corrosion stress two coats will be sufficient for a period of protection to the above standard for 15 years. For more information check out our downloads.   Other Brantho-Korrux-coating offers: APS: Branth's Adhesion Primer Special, flat primer for all sorts of substrates, aheres very well to zinc, aluminium, various "2-Kompo": for all metals, primer/topcoat, universal recoatable, rapid curing (20° C), semi-gloss Robust-Lack: glossy finish, flexible, fast drying, preferably brush or spray application Nitrofest: Flat, easy to sand, dries very rapidly, for steel and also manually prepared   Within 2 days Brantho-Korrux will be available in larger quantities  

Brantho-Korrux "3 in 1" in 400 ml spray Rust Prevention - Metal Protection- Maintenance Paint   Features: Semi-gloss coating, in over 60 RAL colours directly available Reduced labour cost due to superior hiding power Reduced material consumption due to high solids Long lifetime expectancy due to excellent corrosion resistance Fewer official conditions due to optimal environmental acceptance   Areas of application: Protection against corrision of constructions, machines and transport vehicles made of iron, steel, stainless steel, aluminium, and other non-ferric materials, hard plastics etc. in rural, urban, industrial and maritime areas. As a protective coating for new construction or maintenance, both primer and topcoar, as a primer for 1-component finishes and most 2-component finishes. Ideal fpr constructions built from several types of materials. For winter road clearence equipemt, sea containers, high-tension towers, lorry xhassis's, building equipment, bridges, cranes, vessels, boats, cladding (both coated or bare), railway stations, platform structures, fences, gates, producting halls, pipelines, storage tanks, gutters, cooling equipemt and many other objects. Approved as primer cpat, intermediate coat and top coat for steel-constructions and -equipments.   Coverage pays: Theoretically 1 litre is sufficient for 17.3 m² at a dry film thickness of 30 μm. Practically we recommend a higher d.f.t. for optimal corrosion resistance. 1 litre then will cover ca. 6 m². Suitable for brush, roller and spray application   Technical data in short form for comparison:      Brantho-Korrux   Top coats 3in1 Nitrofest 2-Kompo Eco-Base   S-Glasur Robust-paint Yield - caulculated 30 my 17,3 m² 16,6 m² 13,3 m² 13,9 m² 18,3 m² 16,8 m² - practical 6 m² 6 m² 4 m² 5 m² 8 m² 8 m² Drying times 20°C - dust-dry 25 Min. 10 Min. 20 Min. 15 Min. 75 Min. 20 Min. - dry to handle 100 Min. 60 Min. 40 Min. 40 Min. 6 Std. 100 Min. - completely dried 10 Hours. 14 Hours. 8 Hours. 16 Hours. 36 Hours. 10 Hours. - stackable 72 Hours. 16 Hours. 16 Hours. 6 Hours. 2 Days 3 Days - 20 Min./60°C stackable 216 Hours. 45 Min. 1 Hour. 60 Min. 1 Day 5 Days EU-VOC-legislation (g/l) <400 <420 <380 <60 <350 <420   Expected duration of protection (DIN EN ISO 12944-6): The longest duration of protection (over 15 years) will be achieved with three coats (each 80 m). At moderate corrosion stress two coats will be sufficient for a period of protection to the above standard for 15 years. For more information check out our downloads.   Other Brantho-Korrux-coating offers: APS: Branth's Adhesion Primer Special, flat primer for all sorts of substrates, aheres very well to zinc, aluminium, various "2-Kompo": for all metals, primer/topcoat, universal recoatable, rapid curing (20° C), semi-gloss Robust-Lack: glossy finish, flexible, fast drying, preferably brush or spray application Nitrofest: Flat, easy to sand, dries very rapidly, for steel and also manually prepared   Within 2 days Brantho-Korrux will be available in larger quantities  

Brantho-Korrux "3 in 1" in 5 L Can Rust Prevention - Metal Protection- Maintenance Paint   Features: Semi-gloss coating, in over 60 RAL colours directly available Reduced labour cost due to superior hiding power Reduced material consumption due to high solids Long lifetime expectancy due to excellent corrosion resistance Fewer official conditions due to optimal environmental acceptance   Areas of application: Protection against corrision of constructions, machines and transport vehicles made of iron, steel, stainless steel, aluminium, and other non-ferric materials, hard plastics etc. in rural, urban, industrial and maritime areas. As a protective coating for new construction or maintenance, both primer and topcoar, as a primer for 1-component finishes and most 2-component finishes. Ideal fpr constructions built from several types of materials. For winter road clearence equipemt, sea containers, high-tension towers, lorry xhassis's, building equipment, bridges, cranes, vessels, boats, cladding (both coated or bare), railway stations, platform structures, fences, gates, producting halls, pipelines, storage tanks, gutters, cooling equipemt and many other objects. Approved as primer cpat, intermediate coat and top coat for steel-constructions and -equipments.   Coverage pays: Theoretically 1 litre is sufficient for 17.3 m² at a dry film thickness of 30 μm. Practically we recommend a higher d.f.t. for optimal corrosion resistance. 1 litre then will cover ca. 6 m². Suitable for brush, roller and spray application   Technical data in short form for comparison:      Brantho-Korrux   Top coats 3in1 Nitrofest 2-Kompo Eco-Base   S-Glasur Robust-paint Yield - caulculated 30 my 17,3 m² 16,6 m² 13,3 m² 13,9 m² 18,3 m² 16,8 m² - practical 6 m² 6 m² 4 m² 5 m² 8 m² 8 m² Drying times 20°C - dust-dry 25 Min. 10 Min. 20 Min. 15 Min. 75 Min. 20 Min. - dry to handle 100 Min. 60 Min. 40 Min. 40 Min. 6 Std. 100 Min. - completely dried 10 Hours. 14 Hours. 8 Hours. 16 Hours. 36 Hours. 10 Hours. - stackable 72 Hours. 16 Hours. 16 Hours. 6 Hours. 2 Days 3 Days - 20 Min./60°C stackable 216 Hours. 45 Min. 1 Hour. 60 Min. 1 Day 5 Days EU-VOC-legislation (g/l) <400 <420 <380 <60 <350 <420   Expected duration of protection (DIN EN ISO 12944-6): The longest duration of protection (over 15 years) will be achieved with three coats (each 80 m). At moderate corrosion stress two coats will be sufficient for a period of protection to the above standard for 15 years. For more information check out our downloads.   Other Brantho-Korrux-coating offers: APS: Branth's Adhesion Primer Special, flat primer for all sorts of substrates, aheres very well to zinc, aluminium, various "2-Kompo": for all metals, primer/topcoat, universal recoatable, rapid curing (20° C), semi-gloss Robust-Lack: glossy finish, flexible, fast drying, preferably brush or spray application Nitrofest: Flat, easy to sand, dries very rapidly, for steel and also manually prepared   Within 2 days Brantho-Korrux will be available in larger quantities  

Branth's "3-in-1" hardener concentrate   Features: Improves the properties of Brantho-Korrux 3-in-1 Please store in a dry place as the hardener is sensitive to moisture   Application:   Addition of 5-10 % Branth's "3-in-1" hardener concentrate Quicker drying Improved scratch resistance Less sensitive surface Information on the best-before date: The best-before date on the paint cans indicates the minimum shelf life guaranteed by Branth for originally sealed cans when stored in a cool (10-20°C) and dry place.   The best-before date is NOT an expiry date! Under the conditions described, the paint can generally be used for a further 5 years without complaint. The date given should help you to use up older cans from your paint shelf first. As long as the paint can be stirred perfectly and is homogeneous, it can be used without any problems.   Branths hardener concentrate is also available in larger quantities within 2 days, regardless of the quantity currently available.  

Handle for spray cans "Spray-Boy"   Perfectly for our rust-prevention spray cans from Fluid Film, Brantho Korrux and Fertan Made in Germany!   Features: Transforms spray cans into spray guns Improves your your spraying skills Chemical resistant plastic Resilient trigger No messy fingers after longer use Economical and reusable Creates controllable dosage Utility pantent   Application: Slide handle straight forward on can until bracket engages noticeably. Spraying. Slide handle straight backward. Never remove handle up- or downwards.      Examples of application: Our rust-prevention spray cans from Fluid Film, Brantho Korrux or Fertan Paintsprays Cleaning sprays Insecticides Air fresheners Glue sprays Decor sprays De icer sprays Windows cleaners Car care sprays Rust- and underseal sprays

  Nozzle for Branth-5 l cans easy to mount comfortable and clean in use