Brantho-Korrux "3 in 1" in 400 ml spray Rust Prevention - Metal Protection- Maintenance Paint   Features: Semi-gloss coating, in over 60 RAL colours directly available Reduced labour cost due to superior hiding power Reduced material consumption due to high solids Long lifetime expectancy due to excellent corrosion resistance Fewer official conditions due to optimal environmental acceptance   Areas of application: Protection against corrision of constructions, machines and transport vehicles made of iron, steel, stainless steel, aluminium, and other non-ferric materials, hard plastics etc. in rural, urban, industrial and maritime areas. As a protective coating for new construction or maintenance, both primer and topcoar, as a primer for 1-component finishes and most 2-component finishes. Ideal fpr constructions built from several types of materials. For winter road clearence equipemt, sea containers, high-tension towers, lorry xhassis's, building equipment, bridges, cranes, vessels, boats, cladding (both coated or bare), railway stations, platform structures, fences, gates, producting halls, pipelines, storage tanks, gutters, cooling equipemt and many other objects. Approved as primer cpat, intermediate coat and top coat for steel-constructions and -equipments.   Coverage pays: Theoretically 1 litre is sufficient for 17.3 m² at a dry film thickness of 30 μm. Practically we recommend a higher d.f.t. for optimal corrosion resistance. 1 litre then will cover ca. 6 m². Suitable for brush, roller and spray application   Technical data in short form for comparison:      Brantho-Korrux   Top coats 3in1 Nitrofest 2-Kompo Eco-Base   S-Glasur Robust-paint Yield - caulculated 30 my 17,3 m² 16,6 m² 13,3 m² 13,9 m² 18,3 m² 16,8 m² - practical 6 m² 6 m² 4 m² 5 m² 8 m² 8 m² Drying times 20°C - dust-dry 25 Min. 10 Min. 20 Min. 15 Min. 75 Min. 20 Min. - dry to handle 100 Min. 60 Min. 40 Min. 40 Min. 6 Std. 100 Min. - completely dried 10 Hours. 14 Hours. 8 Hours. 16 Hours. 36 Hours. 10 Hours. - stackable 72 Hours. 16 Hours. 16 Hours. 6 Hours. 2 Days 3 Days - 20 Min./60°C stackable 216 Hours. 45 Min. 1 Hour. 60 Min. 1 Day 5 Days EU-VOC-legislation (g/l) <400 <420 <380 <60 <350 <420   Expected duration of protection (DIN EN ISO 12944-6): The longest duration of protection (over 15 years) will be achieved with three coats (each 80 m). At moderate corrosion stress two coats will be sufficient for a period of protection to the above standard for 15 years. For more information check out our downloads.   Other Brantho-Korrux-coating offers: APS: Branth's Adhesion Primer Special, flat primer for all sorts of substrates, aheres very well to zinc, aluminium, various "2-Kompo": for all metals, primer/topcoat, universal recoatable, rapid curing (20° C), semi-gloss Robust-Lack: glossy finish, flexible, fast drying, preferably brush or spray application Nitrofest: Flat, easy to sand, dries very rapidly, for steel and also manually prepared   Within 2 days Brantho-Korrux will be available in larger quantities  

FLUID FILM AS-R 400 ml Spray can 6pcs set+probe   FLUID FILM AS-R as 400 ml spray can is a universal product for maintenance, preservation, rust dissolving and as a lubricant. 400 ml spray can 6pcs set+probe Viscosity: low (eg. like sirup) Creep ability: + + + + Protection: ca. 4 years (in closed cavities) Processing: Spray can with additional fine applicator   General usage: FLUID FILM AS-R is a physiologically harmless, solvent-free and thixotropic one-layer corrosion protection coating with slip and rust dissolving effect based on lanolin and forms a clear and glossy protective film. The 400 ml spray can contains FLUID FILM NAS with propane-butane as propellant.   400 ml spray can as a universal product for commercial and private use for maintenance, preservation, rust dissolving and as a lubricant.   FLUID FILM AS-R is very suitable for factories, workshops, garages and the do-it-yourselfer for use as a preservative, maintenance product, rust remover and lubricant.   On the car it provides protection for folds, door edges, cavities, engine compartment as well as for all other parts at risk of corrosion. Especially when shut down in winter, even a thin film of FLUID FILM AS-R protects even motorcycles, bicycles or boat parts from rust, also on chains, joints and metal surfaces, such as machines and tools, corrosion is stopped immediately or does not occur at all. By combining it as a corrosion inhibitor and lubricant, moving parts such as idler pulleys, chain transmissions or joints can be protected.   FLUID FILM AS-R can be used very effectively for the maintenance of sports, leisure and household equipment or in the restoration sector, where special attention is paid to the original patina.   Unlike conventional products, FLUID FILM AS-R is more environmentally friendly and economical to use due to its solvent-free composition.   The basic substance lanolin is not volatile like oil or kerosene and does not resinify. In contrast, the effect of solvents usually wears off after 12-15 seconds, and that of oil or kerosene ends after a few days, at which point these conventional agents completely lose their protective effect.   The insert from the 400 ml spray can allows an even application on large surfaces with the normal spray attachment.   For pinpoint use even in difficult-to-reach places, there is a 15 cm long spray tube on the can. For use in longer cavities, an approx. 60 cm long spray head extension with a 3-jet all-round nozzle can be supplied.   Application: Surface preparation: Surface may be dry or wet, loose dirt and rust to be removed. Surfaces may still be wet but without surface water. Application: Spray FLUID FILM evenly on cleaned, dry or wet surfaces. If needed, repeat application. Hard-to-reach areas to be coated by means of the sprayhead with spraytube. Coating can be removed easily with fuel and other degreasing agents. Storage: To be stored in a cool and dry place. Recommended storage temperature: 15-35°C Pressurized gas packaging can be stored for 2 years.   Principal characteristics: Behaves extremely resistant to all weather conditions, including snow and slush and the solvent salts used in winter service. Extremely effective and reliable at the same time as a rust remover and water-displacing corrosion inhibitor. Excellent salt water resistance. As corrosion protection of steel parts and other metal parts during transport and processing in the manufacturing plant. Fast creeping, yet well adhering, temperature stable, will not be washed off or altered by rain and sea water, nor will it evaporate and gum up, as is the case with most penetrating oils. Bitumen protection layers already on the car chassis floors are plasticized by FLUID FILM and thus activated.

Handle for spray cans "Spray-Boy"   Perfectly for our rust-prevention spray cans from Fluid Film, Brantho Korrux and Fertan Made in Germany!   Features: Transforms spray cans into spray guns Improves your your spraying skills Chemical resistant plastic Resilient trigger No messy fingers after longer use Economical and reusable Creates controllable dosage Utility pantent   Application: Slide handle straight forward on can until bracket engages noticeably. Spraying. Slide handle straight backward. Never remove handle up- or downwards.      Examples of application: Our rust-prevention spray cans from Fluid Film, Brantho Korrux or Fertan Paintsprays Cleaning sprays Insecticides Air fresheners Glue sprays Decor sprays De icer sprays Windows cleaners Car care sprays Rust- and underseal sprays

Brantho-Korrux "nitrofest" 400 ml rust prevention spray   Brantho-Korrux “nitrofest” is a heavy duty, flat, 1-component coating showing excellent corrosion resistance and fast drying properties. Particularly suitable as a primer, also on manually prepared, rusty substrates. A two-coat system is weather-, seawaterand oil resistant. Easy application very, good adhesion properties, can even be over-coated with nitro-cellulose and most 2-component coatings. Excellent coverage due to high solid contents. Environmental friendly, neither contains heavy metals nor aromatic hydrocarbon solvents.   Features: Rapid drying, touch-dry after just 10 minutes, therefore good edge coverage, low risk of soiling Universal recoatability no nitro paint but can even be recoated with nitro and 2-component paints Long service life proven in practice over many years: e.g. on machines, structures, pipes, railings, grilles, gates, roofs, containers, vehicles, etc. High environmental compatibility without hazard symbol according to Ordiance on Hazardous Substances: for humans and the environment, low exposure during processing Enormous filling and covering power forms a highly filled base coat that can be universally painted over. 18 different colors are immediately available from stock, others from 25 ltr. minimum production quantity Compatible with residual rust saves the difficult, cost-intensive fine rust removal - absorbs flash rust and prevents under-rusting; preferred by leading railroad companies over any rust converter Universally applicable simplifies storage and avoids mix-ups Areas of application of Brantho-Korrux "nitrofest": Corrosion protection on iron and steel structures in land, urban, industrial and marine atmospheres For new and overhaul coatings As an active anti-corrosion primer for top coats based on alkyd, acrylic, PVC, plyester, cyclo rubber, bitumen, PU, etc. Corrosion protection on vehicles, machines, vehicle components, transport racks, railings, beams, pipes, cladding, gates, etc. As a primer and filler at the same time for object coatings or parts production Special colors: RAL 6031 bronze green, RAL 8027 leather brown, RAL 9021 tar grey: These are components of the 3-color spot camouflage paint FTA, which the Bundeswehr uses on combat vehicles and tactical vehicles. The paints are often also referred to as nato paint, camouflage paint, military paint and military paint. Note: These three colors are dull matt. As they are offered for the civilian market, they are not infrared reflective! Further information and safety instructions can be found in the download area.   Technical data in short form for comparison:   Brantho-Korrux   Top coats 3in1 Nitrofest 2-Kompo Eco-Base   S-Glaze Robust-paint Yield - calculated 30 my 17,3 m² 16,6 m² 13,3 m² 13,9 m² 18,3 m² 16,8 m² - practical 6 m² 6 m² 4 m² 5 m² 8 m² 8 m² Drying times at 20°C - dust-dry 25 Min. 10 Min. 20 Min. 15 Min. 75 Min. 20 Min. - dry to handle 100 Min. 60 Min. 40 Min. 40 Min. 6 Hours. 100 Min. - completely dried 10 Hours. 14 Hours. 8 Hours. 16 Hours. 36 Hours. 10 Hours. - stackable 72 Hours. 16 Hours. 16 Hours. 6 Hours. 2 Days 3 Days - 20 Min./60°C stackable 216 Hours. 45 Min. 1 Hour. 60 Min. 1 Day 5 Days EU-VOC-legislation(g/l) <400 <420 <380 <60 <350 <420   Information on the best-before date: The best-before date on the paint cans indicates the minimum shelf life guaranteed by Branth for originally sealed cans when stored in a cool (10-20°C) and dry place. The best-before date is NOT an expiration date!   Under the conditions described, the paint can generally be used for a further 5 years without complaint. The date given should help you to use up older cans from your paint shelf first. As long as the paint can be stirred perfectly and is homogeneous, it can be used without any problems.   Brantho-Korrux is also available in larger quantities within 2 days, regardless of the quantity currently available.    

Fertan Ferpox Epoxyprimer 400 ml Spray   Features: FERPOX is a 1-K epoxy primer Lead and chromate free temperature resistant from -40° C to + 250° C overcoatable FERPOX is applied like normal adhesive ground or primer particularly good adhesion to: Iron and steel Pre-treated aluminium hot-dip galvanized metal the ideal primer for all metals exposed to high stress or corrosion hazards: particularly high strength closed surface FERPOX can be injected (diluted) and coated Colour grey RAL 7012 400 millilitre spray can   Scope of application: Vehicle restoration: Subfloors Wheel arches Spray walls Frame and disc frames Battery holders etc.   Processing: FERPOX is applied like normal adhesive base or paint. Application is carried out by means of a brush, roller or spray gun. When applied with compressed air spray guns with max. Dilute 10% nitro dilution. When applying with a brush or roll, do not apply too high layer thicknesses, 1x thin layer is completely sufficient. Compressed air processing: Nozzle: 1. 5 Pressure: 2 – 4 bar Dilution: Nitro dilution (only) Theoretical yield: Different depending on the type of surface and processing. Yield: Film thickness Wet Dry Area 77μm 50 μm 6. 9 m2/kg 108 μm 70 μm 4. 8 m2/kg Technical data:   Delivery viscosity: approx. 150 sec. DIN 4 mm Density: approx. 1. 18 – 1. 24 kg/litre Overpaintable with 1-K and 2-K standard coatings: with 2-K max. 150 μm. Temperature resistance: -40° C to +250° C Permanent load – (colour change possible) Dry season:   At 20°C Dust dry: approx. 30 min. Grip-proof: approx. 60 min. Overpaintable: approx. 6 hours. Cured: approx. 24 hours.