Kukko Seal disassembly tools including bolts and extensions

Kukko Seal disassembly tools Description2K Powergrip.Milled steel bladeFor small spaces, Kukko recommends performing the removal process with the 222-1 slide hammer! UseUniversal remover for oil seals, axial shaft seals, sealing sleeves and other bearing seals. AdvantageQuick and easy to use due to 2K-Powergrip.Solid blade with 2 receptors How it worksAttach the blade to the component and lever.

Kukko Pulling chuck for deep groove bearing inner races DescriptionMechanical pressure screw.Milled thread treated with special coating. UseFor pulling separable bearing inner races with a diameter of 5-32 mm on magnets, light machines, electric motors and small electrical machinery. Safety informationDo not use any electrical or pneumatic servo screwdrivers or hammer drills.Protective blanket required.Protective goggles required.

Kukko Universal set of separator, puller and ball bearing extractor DescriptionTwo-arm puller: Clamping span: 95 mm, clamping depth: 115 mmClamping depth extensions 95 mm.For separating and pulling bearings with an exterior diameter of 6-40 mm.Extraction of ball bearings, series 6004-6013, 6201-6206, 6300-6305.Instructions on the cover.Secure storage in special foam.Personal KUKKO-Chip-Code. UseFor simple and problem-free free removal of ball bearings, cylinders, discs, pole wheels and similar parts on motorcycles and other small motors. AdvantagePractical package for universal use.Complete easy-to-manage package.Almost all components available as replacement parts, time-saving order process thanks to numbering system.Kit in the tried-and-tested KUKKO-i-Boxx-System.

Kukko Ball bearing extractor set Universal"

Kukko Ball bearing extractor set Universal"

Kukko Ball bearing extractor set Universal"

Kukko Ball bearing puller „PULLPO“

Kukko 3 narrow replacement jaws with rings (red) DescriptionPulling jaws specifically developed for precise mounting in bearing tracks for optimal support and better extension force.Pulling jaws made of two parts. Dowel pin is hammered into the upper end of the jaw.The proven KUKKO claw in a newly developed, modern jaw design.The two pulling jaw versions are color-coded for easier distinction.The pulling jaws are tempered for a long service life. UseTo remove grooved ball bearings without causing damage and without having to dismantle the shaft. AdvantageSimple mounting of the pulling jaws with 90° rotation in the cross-beam.Only two pulling jaw types required.Machined, lateral jaw surfaces ensure optimal jaw alignment with the cross-beam.Secure, form-fitting connection of the pulling jaws with the cross-beam.

Kukko 3 wide replacement jaws with rings (blue) DescriptionPulling jaws specifically developed for precise mounting in bearing tracks for optimal support and better extension force.Pulling jaws made of two parts. Dowel pin is hammered into the upper end of the jaw.The proven KUKKO claw in a newly developed, modern jaw design.The two pulling jaw versions are color-coded for easier distinction.The pulling jaws are tempered for a long service life. UseTo remove grooved ball bearings without causing damage and without having to dismantle the shaft. AdvantageSimple mounting of the pulling jaws with 90° rotation in the cross-beam.Only two pulling jaw types required.Machined, lateral jaw surfaces ensure optimal jaw alignment with the cross-beam.Secure, form-fitting connection of the pulling jaws with the cross-beam.

Kukko Ball bearing puller „PULLPO“

Kukko 4 narrow replacement jaws with rings (red) DescriptionPulling jaws specifically developed for precise mounting in bearing tracks for optimal support and better extension force.Pulling jaws made of two parts. Dowel pin is hammered into the upper end of the jaw.The proven KUKKO claw in a newly developed, modern jaw design.The two pulling jaw versions are color-coded for easier distinction.The pulling jaws are tempered for a long service life. UseTo remove grooved ball bearings without causing damage and without having to dismantle the shaft. AdvantageSimple mounting of the pulling jaws with 90° rotation in the cross-beam.Only two pulling jaw types required.Machined, lateral jaw surfaces ensure optimal jaw alignment with the cross-beam.Secure, form-fitting connection of the pulling jaws with the cross-beam.

Kukko 4 wide replacement jaws with rings (blue) DescriptionPulling jaws specifically developed for precise mounting in bearing tracks for optimal support and better extension force.Pulling jaws made of two parts. Dowel pin is hammered into the upper end of the jaw.The proven KUKKO claw in a newly developed, modern jaw design.The two pulling jaw versions are color-coded for easier distinction.The pulling jaws are tempered for a long service life. UseTo remove grooved ball bearings without causing damage and without having to dismantle the shaft. AdvantageSimple mounting of the pulling jaws with 90° rotation in the cross-beam.Only two pulling jaw types required.Machined, lateral jaw surfaces ensure optimal jaw alignment with the cross-beam.Secure, form-fitting connection of the pulling jaws with the cross-beam.

Kukko Bearing fitting tool kit made of steel, heavy duty DescriptionFor mobile use, we recommend Series 71-L.33 impact rings made of extra strong steel.5 strike pipes made of extra strong steel.1 dead blow hammer.Instructions and conversion table in the cover.Secure storage in special foam.Personal KUKKO-Chip-Code. UseFor bearing installation with a hydraulic press or hammer. AdvantageThe combination of impact ring and impact sleeve required for the installation of the ball bearing can be found in the table inside the case cover.The axes, bearing casings and gaskets of the bearing will not be damaged.With the combination of the impact ring and the impact pipe, the installation forces are never directed through the rolling elements of the bearing.Almost all components available as replacement parts, time-saving order process thanks to numbering system.Complete easy-to-manage package.KUKKO-L-Boxx-System compatible with systems by all common manufacturers. How it worksSelect the impact sleeve and ring that correspond to the ball bearing´s ISO number, press start or strike.

Kukko Bearing fitting tool kit, light outdoor installation set Description33 impact rings made of extremely shockproof plastic.3 strike pipes made of anodized aluminum.1 dead blow hammer.Instructions and conversion table in the cover.Secure storage in special foam.Personal KUKKO-Chip-Code. UseFor quick, precise and secure installation of bearings and seals. AdvantageThe combination of impact ring and impact sleeve required for the installation of the ball bearing can be found in the table inside the case cover.The axes, bearing casings and gaskets of the bearing will not be damaged.The impact rings have a rubber ring and ensure locking at the strike pipe.With the combination of the impact ring and the impact pipe, the installation forces are never directed through the rolling elements of the bearing.Almost all components available as replacement parts, time-saving order process thanks to numbering system.Complete easy-to-manage package.KUKKO-L-Boxx-System compatible with systems by all common manufacturers. How it worksSelect the impact sleeve and ring that correspond to the ball bearing´s ISO number, start and strike the part with the dead blow hammer.Lightweight design is not suitable for a press.

Kukko Steering head bearing fitting tool kit DescriptionSet is suitable for all motorcycles.The following are also included in the set: 1 clipping device for fluid hosesSpecifically intended for the replacement of the steering head bearing.Instructions and conversion table in the cover.Secure storage in special foam. UseFor installation of steering head bearings on motorcycles AdvantageThe special shape of the impact ring allows for the power to be transmitted only to the internal ring during pressing or hammering of the tapered roller bearing.This means that the bearing cage will not be destroyed.The combination of impact ring and impact sleeve required for the installation of the ball bearing can be found in the table inside the case cover.The axes, bearing casings and gaskets of the bearing will not be damaged.The impact rings have a rubber ring and ensure locking at the strike pipes.With the combination of the impact ring and the impact pipe, the installation forces are never directed through the rolling elements of the bearing.Complete easy-to-manage package.Kit in the tried-and-tested KUKKO-i-Boxx-System. How it worksSelect impact ring according to the size of the ball bearings and strike the component with a dead-blow hammer. Safety informationEnsure motorcycle is securely positioned.Do not remove any brake lines, only brackets.Brake lines must be safeguarded against twisting and loading, for example, by sagging brake callipers.When loosening the central nut, secure the lower triple clamp to prevent its falling down.Observe the manufacturer´s torque specifications.Before test driving, it is imperative to engage the front brake several times in order to restore the pressure working point.

Kukko Seal pulling set (radial shaft seal) in case DescriptionInstructions on the cover.Secure storage in special foam. UseFor the extraction of radial shaft seals, oil seals, sealing sleeves, seals, bearing seals and shaft gaskets. AdvantagePractical package for universal use.Almost all components available as replacement parts, time-saving order process thanks to numbering system.Complete easy-to-manage package.KUKKO-L-Boxx-System compatible with systems by all common manufacturers. How it worksA small hole must be punched in the steel jacket of the Simmerring® (gasket) with the awl in order to prevent boring chips. Then drive the self-tapping special screws into the seal ring with the basic device, screw them in, and then knock the seal ring out using the slide hammer.

Kukko PULLPO ball bearing puller set

Kukko PULLPO ball bearing puller set

Kukko PULLPO ball bearing puller set

Kukko Ball bearing extractors DescriptionPulling hook developed specifically for precise installation in the bearing´s tracks for ideal level of support and better extension force.Ball bearing puller.Pulling hook setsSupport ringsMechanical pressure screw.Milled thread treated with special coating.Instructions and conversion table in the cover.Secure storage in special foam.Personal KUKKO-Chip-Code. UseTo remove grooved ball bearings without causing damage and without having to dismantle the shaft. AdvantageQuick and secure selection thanks to markings on the pulling hooks.Practical package for universal use.Spindle head band prevents the wrench from slipping off.Almost all components available as replacement parts, time-saving order process thanks to numbering system.Complete easy-to-manage package.KUKKO-L-Boxx-System compatible with systems by all common manufacturers. How it works1. Select the ball bearing puller, pulling hook set and support ring that correspond to the ball bearing´s ISO number.2. Insert the pulling hook into the hook holder ring.3. Place the support ring on the shaft.4. Hook the pulling ring onto the outer ring track on the ball bearing.5. Position and attach the ball bearing puller and secure the puller using the sleeve.6. Tightening of the pressure screw and the resulting pressure removes the ball bearing from the shaft. Safety informationDo not use any electrical or pneumatic servo screwdrivers or hammer drills.Protective blanket required.Protective goggles required.

Kukko Mobile inductive bearing heater

Kukko Workshop inductive bearing heater