Wera 91 Vario extension Vario blades and adaptors Vario extension for Vario blades and adaptor. 6 mm hexagonal material. Take-up: 6 mm hexVario extension for Vario blades and adaptorChrome-plated hexagonal material, 6 mm6 mm hex Features:Application: Vario blades and adaptorsBlade:6 mm hexagon, chrome-platedDrive:6 mm hexagon socket Contents:91 Vario extension, 175 mm Technical features:Width (mm): 12Length (mm): 175Height (mm): 12Weight (g): 75EAN: 4013288000804

Wera 917 SPH PH 4 x 200 mm S/driver for Phillips screws Wera Chiseldriver for fastening, chiselling and loosening seized screws. Single-component Kraftfrom handle for fast and low-fatigue working. A hexagon blade out of high quality bit material that extends right through the blade ensures full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Comes with an impact cap for durability and reduced risk of splintering. More torque can be transferred with the help of an open-end or ring spanner applied to the integrated hexagonal bolster. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace.Chiseldriver for fastening, chiselling and looseningHexagonal blade extending through the handleSingle-component, ergonomic Kraftform handleImpact cap and bolster for the transfer of higher torqueThe Wera Black Point tip offers an exact fit and optimum corrosion protection Features:Application: Phillips screwsBlade:Hexagonal throughout with impact cap, hexagonal bolster for sizes 1 - 4Design:Chrome-plated, Black PointHandle: Kraftform with non-roll feature, multi-component, size 4/200: Kraftform with non-roll feature, single-component Contents:917 SPH Screwdriver for Phillips screws, PH 4 x 200 mm Technical features:Width (mm): 43Length (mm): 317Height (mm): 43Weight (g): 318EAN: 4013288017765

Wera 932 A 2,0 x 12,0 x 200 mm S/driver for slotted screws Wera Chiseldriver for fastening, chiselling and loosening seized screws. Comes with an Single-component Kraftfrom handle for fast and low-fatigue working. A hexagon blade out of high quality bit material that extends right through the blade ensures full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Comes with an impact cap for enhanced service life and reduced risk of splintering. More torque can be transferred with the help of an open-end or ring spanner applied to the integrated hexagonal bolster. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace.Chiseldriver for fastening, chiselling and looseningHexagonal blade extending through the handleSingle-component, ergonomic Kraftform handleImpact cap and bolster for the transfer of higher torqueThe Wera Black Point tip offers an exact fit and optimum corrosion protection Features:Application: Slotted screwsBlade:Hexagonal throughout with impact cap, hexagonal bolster from 0.8 x 4.5Design:Chrome-plated, Black PointHandle: Kraftform with non-roll feature, multi-component, sizes 2.0 x 12.0, 2.5 x 14.0: Kraftform with non-roll feature, single-component Contents:932 A Screwdriver for slotted screws, 2 x 12 x 200 mm Technical features:Width (mm): 43Length (mm): 317Height (mm): 43Weight (g): 316EAN: 4013288018069

Wera Kraftform Kompakt 60i 1,2 x 6,5 x 154 mm Inter-changeable blade (slotted) for KK VDE VDE blades for Kraftform Kompakt handle/interchangeable blade system for rapid exchange of the blades without any special tools. Individually tested as per IEC 60900. Individual testing in a water bath at 10,000 volts so as to ensure safe working at the permitted voltage of 1,000 volts.Kraftform Kompakt VDE interchangeable blades for slotted screwsInsulated, individually tested as per IEC 60900 9 mm hex drive with lead-in chamfer Conical bladeThe Wera Black Point tip offers an exact fit and optimum corrosion protection Features:Application: Slotted screwsBlade:Insulated, individually tested as per IEC 60900Drive:9 mm hexagonal with entry chamferDesign:Conical blade, zinc-phosphated, Black Point Contents:Kraftform Kompakt VDE 60 i, 1.2 x 6.5 x 154 mm Technical features:Width (mm): 13Length (mm): 154Height (mm): 13Weight (g): 29EAN: 4013288104106

Wiha 01404 L-keys Hexagonal ball end matt chrome-plated 8 mm   Features: Blade: Chrome-vanadium steel, through hardened, chrome-plated. Standards: Based on ISO 2936L. Application: Especially for screws that are difficult to access. Extra: The ball end enables the user to work at angles up to 25°.   Technical features: Weight: 99 g Hexagon socket: 8 Length L-key: 206 mm Serie: 369 Wiha Item number: 369080 EAN: 4010995014049

Wiha 03225 Screwdriver SoftFinish® Slotted with one-piece hexagonal blade and solid steel cap 5,5 mm x 100 mm Features:Simplifies your work: Striking cap integrated into the handle allows you to strike and lift with the screwdriver.Facilitates handling: Easy loosening of tight screws thanks to hex bolster for spanners.Protects your health: With the patented SoftFinish® handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs.Increases your efficiency: Screwdriver handle size concept for an optimal balance between precision and control.Application: Particularly suitable for dry applications. Technical features:Screwdriver length: 213 mmSlotted: 5,5 mmHandle diameter: 36 mmVisible blade length: 100 mmWeight: 135 gTip width: 1 mmHex blade diameter: 5 mmSerie: 530 Wiha Item number: 530055EAN: 4010995032258

Wiha 26166 L-key with T-handle ComfortGrip Hex with side drive, matt chrome-plated 3 x 100 mm Features:Simplifies your work: Effortless and comfortable transmission of high torques thanks to T-handle with ComfortGrip.Lowers your costs: Highly durable thanks to high-quality, chrome-plated L-key surface to prevent corrosion.Increases your efficiency: Integrated side drive for effortless fastening and unfastening of rusted or stubborn screws.The Wiha Comfort grip T-handle L-key with side drive is the tool to use when you need to apply high torques comfortably. Thanks to its ergonomic handle design with integrated soft zones, the T-handle is perfectly sized in the hand. Fewer pressure surfaces and less stress on muscles makes working with this tool a pleasure. Thanks to the one-piece blade, the integrated side drive is able to withstand maximum stress loads and enables users to undo and tighten screwed connections which have rusted, become stuck or fastened really tightly. The free hand resting on the handle ensures added stability, preventing the blade from slipping out of the screw head suddenly and thus protecting the screw and blade from damage. The hole in the handle enables the tool to be stored practically on the tool wall.  Technical features:T-handle_diameter: 26 mmWeight: 30,5 gHexagon socket: 3 T-handle_blade_length: 100 mmSide_driver_length_T-handle: 13 mmSerie: 334DS Wiha Item number: 334DS030100EAN: 4010995261665

Wiha 28373 L-key with T-handle ComfortGrip Hexagonal ball end with side drive, matt chrome-plated 4 x 150 mm Features:Blade: Chrome-vanadium steel, through hardened, chrome-plated.Handle: Wiha ComfortGrip, the comfortable multi-component T-handle with soft zones for maximum working comfort.Application: For comfortable high torque transfer. Especially useful for loosening or tightening screws that are hard to move.Specially for hard-to-reach screws.Extra: One piece blade, through the handle withstands even the highest stresses.The ball end enables the user to work at angles up to 25°. Technical features:Side_driver_length_T-handle: 13 mmT-handle_width: 80 mmT-handle_diameter: 26 mmWeight: 43,67 gHexagon socket: 4 Serie: 540DS Wiha Item number: U540DS040150CEAN: 4010995283735

Wiha 39380 Bolt cutter Classic 900 mm Features:Head shape: Bolted jaws, exchangeableDesign: Rugged and durable - inductive hardened blades to approx 60 HRCConvenient: adjustable via the excentric boltsErgonomic: Precision tubular steel handles with rugged non-slip rubber gripsPower - minimal effort when cutting due to the optimal geometryMaterial: Steel hard - jaws of hardened and tempered high-grade chrome molybdenum steelApplication: For cutting cylindrical objects such as pins, wire, bolts and rivets, with a maximum hardness of 40 HRCEspecially suited for cutting reinforcing steel mesh and Monier steel in the building trade Technical features:Weight: 5600 gCutting force: 9 Max. diameter: 11 mmPliers length (mm): 900 mmPliers_length_(Inch): 36 "Serie: Z 27 0 01 Wiha Item number: Z27000401EAN: 4010995393809

Wiha 40976 L-keys TORX® ball end with short handle, titanium silver T30 x 191 mm, 19,2 mm Features:Simplifies your work: Enables fastening and unfastening at an angle of up to 25°.Lowers your costs: Ideal corrosion protection with perfect fitting accuracy in the screw guarantees a long lifespan.Protects your health: Reduction of the risk of injury by increasing the hand working space.If you need to fasten screws in confined spaces or underneath a bracket, the Wiha ball end is the ideal solution for such problem areas. The special ball end geometry allows users to even fasten screws under a bracket up to 25°. The Wiha solution impresses due to the ball end's precise fit into the screw and greater torque transmission thanks to the maximum diameter. A 95° bend in the key also increases manual work space by over 30%, which reduces the risk of injury to knuckles and fingertips. Moreover, the surface coated with titanium silver provides ideal corrosion protection, guaranteeing a long lifespan for the L-key. This makes oily fingers or re-oiling L-keys to maintain corrosion protection a thing of the past. Application: Especially for hard-to-reach Torx screws and confined spaces.The Torx ball end enables fastening and unfastening at an angle of up to 25°.Reduction of the L-key head height of up to 15% improves access.Reduction of the risk of injury to the knuckles and fingertips thanks to a 95° bend of the L-key. Technical features:TORX®: T30 Length L-key: 191 mmL-key_short_blade_length: 19,2 mmHex_blade_(Inch): 1/4 Serie: 366BET Wiha Item number: 366BET030TSEAN: 4010995409760

Wiha 41222 Needle nose pliers Electronic Narrow, long head, curved about 40° in blister pack 158 mm Features:Head shape: Narrow, short head.Design: With plain inside jaws.Width at tip is only 1.2 mm.Material: C 70 special tool steel.Application: For holding small components as well as for holding and angling wires. Technical features:Pliers_length_(Inch): 6 1/4 "Weight: 105 gBlister packed: x Serie: Z 36 1 03 Wiha Item number: Z36115803SB EAN: 4010995412227

Wiha 42992 Fine screwdriver set PicoFinish® Hex, 6 pcs. with holder  Features:Simplifies your work: With a practical plastic holder to hang up or stand on a surface.Facilitates handling: Extra-long rotating cap ensures optimum feed.Increases your efficiency: Screwdriver handle size concept for an optimal balance between precision and control.Increases your precision: Sensitive working and controlled power transmission thanks to the slim handle with a soft grip.The challenge in precision screw fastenings is to work meticulously and carefully without damaging the work piece. Thanks to their long, slim handles and quick-turning zone, Wiha PicoFinish® fine screwdrivers are ideal for delicate and high-precision tasks in precision mechanics as well as for hobbyists and model building. Its ergonomic handle design with a soft zone makes it comfortable to use. The smooth-running rotating cap allows users to turn the screwdriver quickly and sensitively. The printed screwdriver symbols on the rotating cap make it easier to select the right screwdriver profile. The set contains 6 PicoFinish® fine screwdrivers and a holder. The holder can be used to neatly store the fine screwdrivers at workstations.Application: Ideal for fine and delicate fastening tasks for precision mechanics, model-making and hobby activities.1 x PicoFinish® fine screwdriver Hex (42421) 0,9 (0,035") x 40 mm1 x PicoFinish® fine screwdriver Hex (42422) 1,3 (0,05") x 40 mm1 x PicoFinish® fine screwdriver Hex (42423) 1,5 x 50 mm1 x PicoFinish® fine screwdriver Hex (42424) 2,0 (5/64") x 50 mm1 x PicoFinish® fine screwdriver Hex (42425) 2,5 x 60 mm1 x PicoFinish® fine screwdriver Hex (42426) 3 x 60 mm  Technical features:Serie: 263P Wiha Item number: 263PK601EAN: 4010995429928