BGS 2807 Torque Wrench, 20 mm (3/4"), 150 - 750 Nm   Features: BGS 2807 Torque Wrench, 20 mm (3/4"), 150 - 750 Nm ratcheting head, reversible, 48 teeth suitable on screws with right-hand thread viewing window for torque value Resolution: +/- 4%, incl. test certificate torque range: 150-750 Nm Fine scale: 2.5 Nm   Technical features: Gross weight: 7320 g Packaging suitable for wall hanging: Yes Length: 1210 mm EAN: 4026947028071

Gedore 7563-01 Torque wrench DREMOMETER DR A+S 155-760 Nm Gedore 7563-01 Torque wrench DREMOMETER DR A+S 155-760 Nm Features:Technical advantage/Function: Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustmentthereby representing more process reliability of the userClassified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardLightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningSingle- and double-square drive for controlled bi-directional tighteningUse: Controlled screw tightening in the range of 6 - 3000 NmFor use in almost all industrial manufacturing areasFeatures: With certificate acc. to DIN EN ISO 6789traceable via in-house DAkkS laboratory to national standardsAutomatic short-path actuation with tactile impulse and audible signalDual scale with corresponding scale graduation (see table)Type BBCC with push-button releasePre-set DREMOMETER for serial production wherever the same value always needs to be appliedIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request) Technical features:Graduation: 10Precision +/-: +/- 3 %Graduation [lbf·ft]: 10 lbf·ftScale division [Nm]: 10 NmTorque (min.) [lbf·ft]: 115 lbf·ftTorque range (min./max.) [lbf·ft]: 115 lbf·ft - 560 lbf·ftGedore Code-Number: 1210912EAN: 4002805927366 

Gedore 7563-10 Torque wrench DREMOMETER D A+S 155-760 Nm Gedore 7563-10 Torque wrench DREMOMETER D A+S 155-760 Nm Features:Technical advantage/Function: Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustmentthereby representing more process reliability of the userClassified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardLightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningSingle- and double-square drive for controlled bi-directional tighteningUse: Controlled screw tightening in the range of 6 - 3000 NmFor use in almost all industrial manufacturing areasFeatures: With certificate acc. to DIN EN ISO 6789traceable via in-house DAkkS laboratory to national standardsAutomatic short-path actuation with tactile impulse and audible signalDual scale with corresponding scale graduation (see table)Type BBCC with push-button releasePre-set DREMOMETER for serial production wherever the same value always needs to be appliedIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request) Technical features:Graduation: 10Precision +/-: +/- 3 %Graduation [lbf·ft]: 10 lbf·ftScale division [Nm]: 10 NmTorque (min.) [lbf·ft]: 115 lbf·ftTorque range (min./max.) [lbf·ft]: 115 lbf·ft - 560 lbf·ftGedore Code-Number: 1210921EAN: 4002805927380 

Gedore 7568-01 Torque wrench DREMOMETER DRL A+S 155-760 Nm Gedore 7568-01 Torque wrench DREMOMETER DRL A+S 155-760 Nm Features:Technical advantage/Function: Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustmentthereby representing more process reliability of the userClassified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardLightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningSingle- and double-square drive for controlled bi-directional tighteningUse: Controlled screw tightening in the range of 6 - 3000 NmFor use in almost all industrial manufacturing areasFeatures: With certificate acc. to DIN EN ISO 6789traceable via in-house DAkkS laboratory to national standardsAutomatic short-path actuation with tactile impulse and audible signalDual scale with corresponding scale graduation (see table)Type BBCC with push-button releasePre-set DREMOMETER for serial production wherever the same value always needs to be appliedIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request) Technical features:Graduation: 10Precision +/-: +/- 3 %Graduation [lbf·ft]: 10 lbf·ftScale division [Nm]: 10 NmTorque (min.) [lbf·ft]: 115 lbf·ftTorque range (min./max.) [lbf·ft]: 115 lbf·ft - 560 lbf·ftGedore Code-Number: 1210963EAN: 4002805927373 

Gedore 7568-10 Torque wrench DREMOMETER DL A+S 155-760 Nm Gedore 7568-10 Torque wrench DREMOMETER DL A+S 155-760 Nm Features:Technical advantage/Function: Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustmentthereby representing more process reliability of the userClassified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardLightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningSingle- and double-square drive for controlled bi-directional tighteningUse: Controlled screw tightening in the range of 6 - 3000 NmFor use in almost all industrial manufacturing areasFeatures: With certificate acc. to DIN EN ISO 6789traceable via in-house DAkkS laboratory to national standardsAutomatic short-path actuation with tactile impulse and audible signalDual scale with corresponding scale graduation (see table)Type BBCC with push-button releasePre-set DREMOMETER for serial production wherever the same value always needs to be appliedIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request) Technical features:Graduation: 10Precision +/-: +/- 3 %Graduation [lbf·ft]: 10 lbf·ftScale division [Nm]: 10 NmTorque (min.) [lbf·ft]: 115 lbf·ftTorque range (min./max.) [lbf·ft]: 115 lbf·ft - 560 lbf·ftGedore Code-Number: 1210971EAN: 4002805927397 

Gedore 7571-01 Torque wrench DREMOMETER DX A+S 520-1000 Nm Gedore 7571-01 Torque wrench DREMOMETER DX A+S 520-1000 Nm Features:Technical advantage/Function: Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustmentthereby representing more process reliability of the userClassified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardLightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningSingle- and double-square drive for controlled bi-directional tighteningUse: Controlled screw tightening in the range of 6 - 3000 NmFor use in almost all industrial manufacturing areasFeatures: With certificate acc. to DIN EN ISO 6789traceable via in-house DAkkS laboratory to national standardsAutomatic short-path actuation with tactile impulse and audible signalDual scale with corresponding scale graduation (see table)Type BBCC with push-button releasePre-set DREMOMETER for serial production wherever the same value always needs to be appliedIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request) Technical features:Graduation: 10Precision +/-: +/- 3 %Graduation [lbf·ft]: 10 lbf·ftScale division [Nm]: 10 NmTorque (max.) [Nm]: 1000 NmCalibration length: 1290,5 mmGedore Code-Number: 1211005EAN: 4002805927427 

Gedore 7574-10 Torque wrench DREMOMETER DS A+S 110-550 Nm Gedore 7574-10 Torque wrench DREMOMETER DS A+S 110-550 Nm Features:Technical advantage/Function: Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustmentthereby representing more process reliability of the userClassified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardLightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningSingle- and double-square drive for controlled bi-directional tighteningUse: Controlled screw tightening in the range of 6 - 3000 NmFor use in almost all industrial manufacturing areasFeatures: With certificate acc. to DIN EN ISO 6789traceable via in-house DAkkS laboratory to national standardsAutomatic short-path actuation with tactile impulse and audible signalDual scale with corresponding scale graduation (see table)Type BBCC with push-button releasePre-set DREMOMETER for serial production wherever the same value always needs to be appliedIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request) Technical features:Graduation: 10Precision +/-: +/- 3 %Graduation [lbf·ft]: 10 lbf·ftScale division [Nm]: 10 NmTorque (min.) [Nm]: 110 NmTorque range (min./max.) [Nm]: 110 Nm - 550 NmGedore Code-Number: 1427164EAN: 4002805927465 

Gedore 7575-10 Torque wrench DREMOMETER CDL A+S 80-360 Nm Gedore 7575-10 Torque wrench DREMOMETER CDL A+S 80-360 Nm Features:Technical advantage/Function: Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustmentthereby representing more process reliability of the userClassified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardLightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningSingle- and double-square drive for controlled bi-directional tighteningUse: Controlled screw tightening in the range of 6 - 3000 NmFor use in almost all industrial manufacturing areasFeatures: With certificate acc. to DIN EN ISO 6789traceable via in-house DAkkS laboratory to national standardsAutomatic short-path actuation with tactile impulse and audible signalDual scale with corresponding scale graduation (see table)Type BBCC with push-button releasePre-set DREMOMETER for serial production wherever the same value always needs to be appliedIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request) Technical features:Graduation: 10Precision +/-: +/- 3 %Net weight [kg]: 2,4 kgDrive connector square [metric]: 20 mmDistance housing - square drive: 22,5 mmTorque (max.) [lbf·ft]: 260 lbf·ftGedore Code-Number: 1211021EAN: 4002805927410 

Gedore 7579-10 Torque wrench DREMOMETER DSL A+S 110-550 Nm Gedore 7579-10 Torque wrench DREMOMETER DSL A+S 110-550 Nm Features:Technical advantage/Function: Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustmentthereby representing more process reliability of the userClassified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardLightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningSingle- and double-square drive for controlled bi-directional tighteningUse: Controlled screw tightening in the range of 6 - 3000 NmFor use in almost all industrial manufacturing areasFeatures: With certificate acc. to DIN EN ISO 6789traceable via in-house DAkkS laboratory to national standardsAutomatic short-path actuation with tactile impulse and audible signalDual scale with corresponding scale graduation (see table)Type BBCC with push-button releasePre-set DREMOMETER for serial production wherever the same value always needs to be appliedIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request) Technical features:Graduation: 10Precision +/-: +/- 3 %Graduation [lbf·ft]: 10 lbf·ftScale division [Nm]: 10 NmTorque (min.) [Nm]: 110 NmTorque range (min./max.) [Nm]: 110 Nm - 550 NmGedore Code-Number: 1427148EAN: 4002805927472 

Gedore CDS 400 S Dial torque wrench with signal 80-400 Nm Gedore CDS 400 S Dial torque wrench with signal 80-400 Nm Features:Use: Controlled tightening and verification of tightening valuesFor use in almost all industrial manufacturing areasWorking ranges from 0.8 - 2000 Nm / 7 lbf·in - 1500 lbf·ft are coveredFeatures: Dial-indicating torque wrench with dual scale and slave pointer1/43/8"1/2"3/4" or 1" double square drive with ball lock for controlled right and left tighteningVersatile usage. Use for MaintenanceRepairAssembly and Quality ControlFor controlled screw tightening and torque measurementsDisplay accuracy: +/- 4 % tolerance of the indicated valueAcc. to DIN EN ISO 6789traceable to national standardsWith dual scale in Nm and lbf·in or lbf·ft double-tinted clearly readable face5 % overload of the maximum valueHousing made of lightrobust special aluminium construction - painted silver-greyBlacknon-slip rubber handgripsModel No. ADS 4 to No. ADS 40: EPA (Electrostatic Protected Area) compliantfor use in electrostatically sensitive applicationsWith audio-visual signalTest certificate acc. to DIN EN ISO 6789" Technical features:Graduation: 10Graduation [lbf·ft]: 10 lbf·ftScale division [Nm]: 10 NmTotal height [mm]: 111 mmDrive connector square [metric]: 20 mmNet weight [kg]: 3,2 kgGedore Code-Number: 7652280EAN: 4002805304402 

Gedore DDS 800 S Dial torque wrench with signal 160-800 Nm Gedore DDS 800 S Dial torque wrench with signal 160-800 Nm Features:Use: Controlled tightening and verification of tightening valuesFor use in almost all industrial manufacturing areasWorking ranges from 0.8 - 2000 Nm / 7 lbf·in - 1500 lbf·ft are coveredFeatures: Dial-indicating torque wrench with dual scale and slave pointer1/43/8"1/2"3/4" or 1" double square drive with ball lock for controlled right and left tighteningVersatile usage. Use for MaintenanceRepairAssembly and Quality ControlFor controlled screw tightening and torque measurementsDisplay accuracy: +/- 4 % tolerance of the indicated valueAcc. to DIN EN ISO 6789traceable to national standardsWith dual scale in Nm and lbf·in or lbf·ft double-tinted clearly readable face5 % overload of the maximum valueHousing made of lightrobust special aluminium construction - painted silver-greyBlacknon-slip rubber handgripsModel No. ADS 4 to No. ADS 40: EPA (Electrostatic Protected Area) compliantfor use in electrostatically sensitive applicationsWith audio-visual signalTest certificate acc. to DIN EN ISO 6789" Technical features:Graduation: 20Total length [mm]: 1.000 mmTorque (min.) [lbf·ft]: 120 lbf·ftTorque range (min./max.) [lbf·ft]: 120 lbf·ft - 600 lbf·ftTotal height [mm]: 123 mmTorque (min.) [Nm]: 160 NmGedore Code-Number: 7652010EAN: 4002805834084 

Gedore 8574-10 Torque wrench DREMOMETER DS 110-550 Nm Gedore 8574-10 Torque wrench DREMOMETER DS 110-550 Nm Features:Use: Controlled screw tightening in the range of 110 - 550 Nm / 80 - 400 lbf·ftFor use in almost all industrial manufacturing areasFeatures: Classified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standard3/4 square drive with pin-locking mechanism DIN 3120 - B 20ISO 1174Automatic short-path actuation with tactile impulse and audible signalDouble scale with a scale division of 10 Nm and 10 lbf ftTechnical advantage/Function: Lightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningEasy adjustment thanks to attractive adjusting button secured against loss at the end of the handleSingle- and double-square drive for controlled bi-directional tightening" Technical features:Precision +/-: +/- 3 %Graduation [lbf·ft]: 10 lbf·ftScale division [Nm]: 10 NmTorque (min.) [Nm]: 110 NmTorque range (min./max.) [Nm]: 110 Nm - 550 NmNet weight [kg]: 2,9 kgGedore Code-Number: 1427156EAN: 4002805921531 

Gedore 8579-10 Torque wrench DREMOMETER DSL 110-550 Nm Gedore 8579-10 Torque wrench DREMOMETER DSL 110-550 Nm Features:Use: Controlled screw tightening in the range of 110 - 550 Nm / 80 - 400 lbf·ftFor use in almost all industrial manufacturing areasFeatures: Classified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standard3/4 square drive with pin-locking mechanism DIN 3120 - B 20ISO 1174Automatic short-path actuation with tactile impulse and audible signalDouble scale with a scale division of 10 Nm and 10 lbf ftTechnical advantage/Function: Lightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningEasy adjustment thanks to attractive adjusting button secured against loss at the end of the handleSingle- and double-square drive for controlled bi-directional tightening" Technical features:Precision +/-: +/- 3 %Graduation [lbf·ft]: 10 lbf·ftScale division [Nm]: 10 NmTorque (min.) [Nm]: 110 NmTorque range (min./max.) [Nm]: 110 Nm - 550 NmNet weight [kg]: 2,9 kgGedore Code-Number: 1427121EAN: 4002805921548 

Gedore DMK 400 Torque wrench DREMASTER® K 80-400 Nm Gedore DMK 400 Torque wrench DREMASTER® K 80-400 Nm Features:Use: Controlled screw tightening in the range of 80 - 400 Nm / 60 - 300 lbf·ftAdjustablereleasing and sturdy tubular torque wrench with integrated ratchet and with square drive for industry and the tradesFeatures: Classified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardFor controlled bi-directional tighteningModels DMK: 1/2 mushroom head interchangeable square with push-button releasing and a ball-locking mechanism. From Model No. DMK 400 with 3/4" push-through square and a pin-locking mechanismSturdyvarnished tubular steel constructionwith zinc-plated ratchet head and top-grade plastic partsErgonomically shaped plastic handgrip with calibration aidChange-over between Nm main scale and lbf·ft ancillary scale to avoid reading errors when setting the torque wantedWith micrometre scale for main Nm scale for setting interim valuesRelease system triggers a tactile and audible signalErgonomic system for torque adjustment with reference symbolProvision for rapid setting with hexagon allen keynot includedSecured adjusting/setting system" Technical features:Number of teeth: 36Precision +/-: +/- 3 %vernier Nm: 1 NmReturn angle: 10 °Graduation [lbf·ft]: 10 lbf·ftScale division [Nm]: 10 NmGedore Code-Number: 2641267EAN: 4002805931400 

Gedore DMK 550 Torque wrench DREMASTER® K 110-550 Nm Gedore DMK 550 Torque wrench DREMASTER® K 110-550 Nm Features:Use: Controlled screw tightening in the range of 110 - 550 Nm / 80 - 405 lbf·ftAdjustablereleasing and sturdy tubular torque wrench with integrated ratchet and with square drive for industry and the tradesFeatures: Classified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardFor controlled bi-directional tighteningModels DMK: 1/2 mushroom head interchangeable square with push-button releasing and a ball-locking mechanism. From Model No. DMK 400 with 3/4" push-through square and a pin-locking mechanismSturdyvarnished tubular steel constructionwith zinc-plated ratchet head and top-grade plastic partsErgonomically shaped plastic handgrip with calibration aidChange-over between Nm main scale and lbf·ft ancillary scale to avoid reading errors when setting the torque wantedWith micrometre scale for main Nm scale for setting interim valuesRelease system triggers a tactile and audible signalErgonomic system for torque adjustment with reference symbolProvision for rapid setting with hexagon allen keynot includedSecured adjusting/setting system" Technical features:Number of teeth: 36Precision +/-: +/- 3 %vernier Nm: 1 NmReturn angle: 10 °Graduation [lbf·ft]: 10 lbf·ftScale division [Nm]: 10 NmGedore Code-Number: 2641275EAN: 4002805931417 

Gedore DMK 750 Torque wrench DREMASTER® K 150-750 Nm Gedore DMK 750 Torque wrench DREMASTER® K 150-750 Nm Features:Use: Controlled screw tightening in the range of 150 - 750 Nm / 110 - 550 lbf·ftAdjustablereleasing and sturdy tubular torque wrench with integrated ratchet and with square drive for industry and the tradesFeatures: Classified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardFor controlled bi-directional tighteningModels DMK: 1/2 mushroom head interchangeable square with push-button releasing and a ball-locking mechanism. From Model No. DMK 400 with 3/4" push-through square and a pin-locking mechanismSturdyvarnished tubular steel constructionwith zinc-plated ratchet head and top-grade plastic partsErgonomically shaped plastic handgrip with calibration aidChange-over between Nm main scale and lbf·ft ancillary scale to avoid reading errors when setting the torque wantedWith micrometre scale for main Nm scale for setting interim valuesRelease system triggers a tactile and audible signalErgonomic system for torque adjustment with reference symbolProvision for rapid setting with hexagon allen keynot includedSecured adjusting/setting system" Technical features:Number of teeth: 36Precision +/-: +/- 3 %vernier Nm: 1 NmTotal length [mm]: 1.230 mmReturn angle: 10 °Graduation [lbf·ft]: 10 lbf·ftGedore Code-Number: 2641283EAN: 4002805931424 

Gedore DMK 850 Torque wrench DREMASTER® K 250-850 Nm Gedore DMK 850 Torque wrench DREMASTER® K 250-850 Nm Features:Use: Controlled screw tightening in the range of 250 - 850 Nm / 185 - 630 lbf·ftAdjustablereleasing and sturdy tubular torque wrench with integrated ratchet and with square drive for industry and the tradesFeatures: Classified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardFor controlled bi-directional tighteningModels DMK: 1/2 mushroom head interchangeable square with push-button releasing and a ball-locking mechanism. From Model No. DMK 400 with 3/4" push-through square and a pin-locking mechanismSturdyvarnished tubular steel constructionwith zinc-plated ratchet head and top-grade plastic partsErgonomically shaped plastic handgrip with calibration aidChange-over between Nm main scale and lbf·ft ancillary scale to avoid reading errors when setting the torque wantedWith micrometre scale for main Nm scale for setting interim valuesRelease system triggers a tactile and audible signalErgonomic system for torque adjustment with reference symbolProvision for rapid setting with hexagon allen keynot includedSecured adjusting/setting system" Technical features:Precision +/-: +/- 3 %vernier Nm: 1 NmTotal length [mm]: 1.375 mmReturn angle: 10 °Graduation [lbf·ft]: 10 lbf·ftScale division [Nm]: 10 NmGedore Code-Number: 2641291EAN: 4002805931431 

Hazet 5145-3CT Torque wrench 3/4" 300-800 Nm   Features: User-friendly reversible ratchet Accuracy ± 3% of scale value (in direction of actuation) (5107-3 CT ± 4% release accuracy tolerance) Safe torque release: palpable (close gap release) audible ("click" sound) Designed for rough workshop use Wide range of applications for controlled screw tightening in tyre service, bicycle, passenger car and commercial vehicle applications as well as various applications in trade and industry. Optimised sealing ring to protect against debris Ratchet repair set for customer-oriented self-assembly enables decades of use Handle with slip protection for easier power transmission due to improved grip Adjustment aid with detent points for optimised operator guidance ensures safe and fast adjustment of the desired torque value by turning the handle Safe locking of the setting values by latching function on the rotary assembly Rotary assembly in triangular form prevents uncontrolled rolling Lock symbols indicate the respective locking status. Can be attached to the cable loop through openings on the locking rotary assembly Easy-to-read, high-contrast scale Permanent readability due to laser marking on the scale bush Integrated shift lever 5121-3 CT – 5145-3 CT: shift level with free-running function – reduces the risk of injury and malfunction Tested in accordance with DIN EN ISO 6789-2:2017 With calibration certificate and serial number Delivery in sturdy Hexa plastic box Square according to DIN 3120, ISO 1174-1, DIN EN ISO 6789-2:2017 Made in Germany Total length: 1271 mm Output: Square, solid 20 mm (3/4 inch) No turning back: continuous long-term tests on the 5000 series and 6000 series of HAZET torque wrenches have been able to demonstrate that turning them back to the smallest scale value is no longer required  

Hazet 6143-1CTCAL Torque wrench 6143-1CTCAL ? Nm min-max: 100???400 Nm ? Tolerance: 2% ? Square, solid 20 mm (3/4 inch) Features:Torque wrench including DAkkS calibration certificate2-component handle for improved feelSimplified locking for adjusting the torque valueViewing window for visual checking of the locking4 coloured coding rings (red, yellow, green, black) for markings in the case of personalisation or special workflowsAccuracy ± 2?% of the scale value (in direction of actuation for right-hand tighteningFor left-hand tightening, use our torque wrenches with insert tool)High-precision premium torque tools ? for the highest demandsHard chrome-plated steel tube - slim, but very sturdy and wear-resistantSecure storage in safe box with display windowSafety:Haptic (close-gap release)Audible (?click? sound)Visual (models with signal transmitter)User-friendly reversible ratchetService-friendly (do-it-yourself repair sets for ratchets available)Integrated shift leverEasy and safe adjustment of the desired torque value by turning the handleKnob for additionally locking the set valueErgonomically shaped handle with collar reduces the risk of slipping-off and injuryAccuracy ? fine scale graduation6121-1 CT ? 6123-1 CT: shift lever with idle function ? reduces risk of injury and malfunctionWith calibration certificate and serial numberSurface: hard chrome platedDIN EN ISO 6789-2:2017, DIN 3120, ISO 1174-1Made in GermanyOutput: Square, solid 20 mm (3/4 inch)Dimensions / length: 802 mmNm min-max: 100???400 NmTolerance: 2 %Scale Graduation (Nm): 2.5 NmActuating force min.-max. kg: 14.5???59.2 kgNumber of teeth: 32 (Opening angle 11.25°)Head Thickness a: 28.5 mmHead Width b: 64 mmNo more turning back: Continuous long-term tests on the 5000 series and 6000 series of HAZET torque wrenches have demonstrated that turning them back to the smallest scale value is not required Technical features:HAZET Drehmoment-Schlüssel 6143-1CTCAL ? Nm min-max: 100???400 Nm ? Toleranz: 2% ? Vierkant 20 mm (3/4 Zoll)Weight: 5500 gHazet part number: 6143-1CTCALEAN: 4000896192922

Hazet 6144-1CT CAL Torque Wrench 3/4" 200-500 Nm with DAkkS calibration certification   Features: Release accuracy tolerance (in direction of actuation): ± 2 % of scale value High-precision measuring tools for highest demands Hard chrome-plated steel tube - slim, but very sturdy and wear-resistant Safe storage in safe box with display window Safety lock at the handle Safe torque release: - palpable (close gap release) - audible (#201Eclick#201C sound) Knob for locking the set value User-friendly reversible ratchet Service-friendly (Do-It-Yourself repair kits for ratchets available) Integrated shift lever Easy and safe adjustment of the desired torque value by turning the handle Ergonomically shaped handle with collar reducing the risk of slipping-off and injury Accuracy - fine scale graduation With serial number and certificate Surface: hard chrome plated DIN EN ISO 6789:2003 (D), Square according to DIN 3120 A, ISO 1174-1 A 2-component handle for improved feel Simplified locking for adjusting the torque value Viewing window for visual checking of the locking With 3 additional coloured coding rings for markings with personalizations or special workflows Without signal transmitter   Technical specifications: Square drive: 20 (3/4") l: 1040 mm 200 - 500 Nm Graduation: 2,5 Nm

Hazet 6145-1CT CAL Torque Wrench 3/4" 300-800 Nm with DAkkS calibration certificate   Features: Release accuracy tolerance (in direction of actuation): ± 2 % of scale value High-precision measuring tools for highest demands Hard chrome-plated steel tube - slim, but very sturdy and wear-resistant Safe storage in safe box with display window Safety lock at the handle Safe torque release: - palpable (close gap release) - audible ("click" sound) Knob for locking the set value User-friendly reversible ratchet Service-friendly (Do-It-Yourself repair kits for ratchets available) Integrated shift lever Easy and safe adjustment of the desired torque value by turning the handle Ergonomically shaped handle with collar reducing the risk of slipping-off and injury Accuracy - fine scale graduation With serial number and certificate Surface: hard chrome plated DIN EN ISO 6789:2003 (D), Square according to DIN 3120 A, ISO 1174-1 A 2-component handle for improved feel Simplified locking for adjusting the torque value Viewing window for visual checking of the locking With 3 additional coloured coding rings for markings with personalizations or special workflows Without signal transmitter   Technical specifications: Square drive: 20 (3/4") l: 1280 mm 300 - 800 Nm Graduation: 2,5 Nm

Hazet 6150-1CT CAL Torque Wrench 3/4" 400-1000 Nm with DAkkS calibration certificat   Features: For highest torque values Especially suited for industrial climbers Application on wind turbines, dockyards, heavy industry, etc. To be disassembled in two parts with release tool In carrier bag with carrying handle and shoulder strap Release accuracy tolerance ± 3% of scale value in direction of actuation Screw tightening also possible with ratchet shaft. For torque controlled screw tightening always use the complete wrench. 2-component handle for improved feel Simplified locking for adjusting the torque value Viewing window for visual checking of the locking With 3 additional coloured coding rings for markings with personalizations or special workflows Release torque only 590 N (60 kg) with 1000 Nm Length of ratchet shaft 903 mm, handle 930 mm   Technical specification: 1000 Nm Torque Wrench Weight only approx. 10 kg l: 1788 mm 400 - 1000 Nm Square drive: 20 (3/4") Graduation: 5 Nm

KS-Tools 516.1490 3/4" ERGOTORQUE®precision torque wrench with rotary mushroom ratchet head, 110-550Nm Features:3/4" ERGOTORQUE®precision torque wrench with rotary mushroom ratchet head, 110-550NmActuation accuracy: ±3 % tolerance of the set scale valuePrecise reading accuracy for a minimum 5.000 tightening cyclesFor controlled fastening in clockwise and counter clockwise directionsTorque setting by pulling out and pushing in the slide in knob at the end of the handleThe direction of rotation (clockwise and counter clockwise) can be changed by simply rotating the square drive pieceDouble scale in Nm and lbf?ft divisions for precise adjustmentIncludes micrometer scale in Nm divisions for precise and fine adjustmentLarge vision panel, precise adjustment using a magnifying glassAn audible and palpable signal when the desired torque value is achievedExact gearing 30 teeth ratchet mechanismTorque setting is quick and easy using the locking knob in the handle endSecure locking function within the handleWith ejection mechanism on the ratchet headTwo component handle with a soft zone, is ergonomic in design and comfortable in the handSquare drive adaptor to DIN 3120 / ISO 1174 with ball lockIndividually marked with serial number - unique product identificationincluding calibration declaration of conformity according to DIN EN ISO 6789:2017(E) - traceable to national standards Technical features:KS-Tools item number: 516.1490EAN: 4042146270011Weight: 3800 gKeywords: Torque, Torque wrench, Measuring tool

KS-Tools 516.1493 3/4" ERGOTORQUE precision ratchet-torque wrench turning knob, 150-750Nm Features:3/4" ERGOTORQUE precision ratchet-torque wrench turning knob, 150-750NmActuation accuracy: ±3 % tolerance of the set scale valuePrecise reading accuracy for a minimum 5.000 tightening cyclesFor controlled fastening in clockwise and counter clockwise directionsTorque setting by pulling out and pushing in the slide in knob at the end of the handleThe direction of rotation (clockwise and counter clockwise) can be changed by simply rotating the square drive pieceDouble scale in Nm and lbf?ft divisions for precise adjustmentIncludes micrometer scale in Nm divisions for precise and fine adjustmentLarge vision panel, precise adjustment using a magnifying glassAn audible and palpable signal when the desired torque value is achievedExact gearing 30 teeth ratchet mechanismTorque setting is quick and easy using the locking knob in the handle endSecure locking function within the handleWith ejection mechanism on the ratchet headTwo component handle with a soft zone, is ergonomic in design and comfortable in the handSquare drive adaptor to DIN 3120 / ISO 1174 with ball lockIndividually marked with serial number - unique product identificationincluding calibration declaration of conformity according to DIN EN ISO 6789:2017(E) - traceable to national standards Technical features:KS-Tools item number: 516.1493EAN: 4042146285220Weight: 7300 gKeywords: Torque, Torque wrench, Measuring tool