Branth´s RMb Mennige Rust Prevention, 5 L
High quality primer with optimized corrosion protection properties of iron and steel.
Contents:
Titanium compounds, which are resistant to corrosion
Barrier pigments, which shield the ground against corrosive media quality
Anti-corrosion pigments which cause electrochemical corrosion
liquid corrosion inhibitors, with special creep
Special binders, optimal adhesion to the substrate and intermediate adhesion to subsequent coatings
proven chemical solvents combined with novel solvents from renewable resources
low solvent content
contains no lead, no zinc, no chromates, no isocyanates, no harmful aromatics solvents such as xylene
Features:
Orange and matt.
Can be painted over immediately with Brantho-Korrux "3 in 1" or Branth's-robust paint or not later than the next day by usual 1-component or 2-component intermediate or top coats.
No sanding necessary
Not classified according to EEC. The usage is neither dangerous nor environmentally harmful
High filling: good corrosion protection and edge protection for repainting, maintenance paintings or the paint spot prime.
Application: by brush or roller in one component of delivery, or by some combination of splash by adding dilution.
Branth's RMb Mennige Rust Prevention's areas of application:
Corrosion protection of parts and structures made of iron and steel in rural, urban, industrial and marine atmosphere
For new and Retouch painting
As active corrosion protective primer for topcoats based on alkyd, acrylic, PVC, polyester, cyclorubber, bitumen, PU etc.
Corrosion protection of vehicles, machinery, vehicle components, transport racks, etc.
As a primer and filler at the same time for object coatings or parts production.
Ideal für handwerkliche Verarbeitung.
Branth's RMb Mennige Rust prevention can be used for rust, hand prepared surfaces and wet blasted surfaces.
Always ensures optimum corrosion protection and a very good adhesion to old paint.
Information on the best-before date:
The best-before date on the paint cans indicates the minimum shelf life guaranteed by Branth for originally sealed cans when stored in a cool (10-20°C) and dry place.
The best-before date is NOT an expiry date!
Under the conditions described, the paint can generally be used for a further 5 years without complaint.
The date given should help you to use up older cans from your paint shelf first.
As long as the paint can be stirred perfectly and is homogeneous, it can be used without any problems.
Branth's Mennige Rust Preventation is also available in larger quantities within 2 days, regardless of the quantity currently available.
Brantho Korrux Robustlack 750 ml
Corrosion protection for indoor and outdoor use
Features:
Elastic base & finishing coating
Shiny
Fast drying
Due to its high elasticity "Robustlack" is highly impact resistant , making it ideal as a chassis paint
If a hardened surface is desired, additional curing agent must be added!
Difference between Brantho Korrux and Brantho Korrux "3 in 1"
higher solids content
more shine
less odor in processing
less universally on various metals
slower initial drying
Brantho-Korrux
Top coats
3in1
Nitrofest
2-Kompo
Eco-Base
S-Glasur
Robust-paint
Yield
- caulculated 30 my
17,3 m²
16,6 m²
13,3 m²
13,9 m²
18,3 m²
16,8 m²
- practical
6 m²
6 m²
4 m²
5 m²
8 m²
8 m²
Drying times 20°C
- dust-dry
25 Min.
10 Min.
20 Min.
15 Min.
75 Min.
20 Min.
- dry to handle
100 Min.
60 Min.
40 Min.
40 Min.
6 Std.
100 Min.
- completely dried
10 Hours.
14 Hours.
8 Hours.
16 Hours.
36 Hours.
10 Hours.
- stackable
72 Hours.
16 Hours.
16 Hours.
6 Hours.
2 Days
3 Days
- 20 Min./60°C stackable
216 Hours.
45 Min.
1 Hour.
60 Min.
1 Day
5 Days
EU-VOC-legislation (g/l)
<400
<420
<380
<60
<350
<420
Brantho Korrux Robustlack's areas of application
For indoor and outdoor use: Due to the low emissions ideal for indoor applications and for environmentally open applications.
For iron, steel, tin blank or rusted,
You need more than available? No problem, the paint is usually available from stock in large quantities!
Brantho Korrux Robustlack 400 ml spray can
Corrosion protection for indoor and outdoor use
Features:
Elastic base & finishing coating
Shiny
Fast drying
Due to its high elasticity "Robustlack" is highly impact resistant , making it ideal as a chassis paint
If a hardened surface is desired, additional curing agent must be added!
Difference between Brantho Korrux and Brantho Korrux "3 in 1"
higher solids content
more shine
less odor in processing
less universally on various metals
slower initial drying
Brantho-Korrux
Top coats
3in1
Nitrofest
2-Kompo
Eco-Base
S-Glasur
Robust-paint
Yield
- caulculated 30 my
17,3 m²
16,6 m²
13,3 m²
13,9 m²
18,3 m²
16,8 m²
- practical
6 m²
6 m²
4 m²
5 m²
8 m²
8 m²
Drying times 20°C
- dust-dry
25 Min.
10 Min.
20 Min.
15 Min.
75 Min.
20 Min.
- dry to handle
100 Min.
60 Min.
40 Min.
40 Min.
6 Std.
100 Min.
- completely dried
10 Hours.
14 Hours.
8 Hours.
16 Hours.
36 Hours.
10 Hours.
- stackable
72 Hours.
16 Hours.
16 Hours.
6 Hours.
2 Days
3 Days
- 20 Min./60°C stackable
216 Hours.
45 Min.
1 Hour.
60 Min.
1 Day
5 Days
EU-VOC-legislation (g/l)
<400
<420
<380
<60
<350
<420
Brantho Korrux Robustlack's areas of application
For indoor and outdoor use: Due to the low emissions ideal for indoor applications and for environmentally open applications.
For iron, steel, tin blank or rusted,
You need more than available? No problem, the paint is usually available from stock in large quantities!
Brantho Korrux Robustlack 5 L
Corrosion protection for indoor and outdoor use
Features:
Elastic base & finishing coating
Shiny
Fast drying
Due to its high elasticity "Robustlack" is highly impact resistant , making it ideal as a chassis paint
If a hardened surface is desired, additional curing agent must be added!
Difference between Brantho Korrux and Brantho Korrux "3 in 1"
higher solids content
more shine
less odor in processing
less universally on various metals
slower initial drying
Brantho-Korrux
Top coats
3in1
Nitrofest
2-Kompo
Eco-Base
S-Glasur
Robust-paint
Yield
- caulculated 30 my
17,3 m²
16,6 m²
13,3 m²
13,9 m²
18,3 m²
16,8 m²
- practical
6 m²
6 m²
4 m²
5 m²
8 m²
8 m²
Drying times 20°C
- dust-dry
25 Min.
10 Min.
20 Min.
15 Min.
75 Min.
20 Min.
- dry to handle
100 Min.
60 Min.
40 Min.
40 Min.
6 Std.
100 Min.
- completely dried
10 Hours.
14 Hours.
8 Hours.
16 Hours.
36 Hours.
10 Hours.
- stackable
72 Hours.
16 Hours.
16 Hours.
6 Hours.
2 Days
3 Days
- 20 Min./60°C stackable
216 Hours.
45 Min.
1 Hour.
60 Min.
1 Day
5 Days
EU-VOC-legislation (g/l)
<400
<420
<380
<60
<350
<420
Brantho Korrux Robustlack's areas of application
For indoor and outdoor use: Due to the low emissions ideal for indoor applications and for environmentally open applications.
For iron, steel, tin blank or rusted,
You need more than available? No problem, the paint is usually available from stock in large quantities!
Branth's S-Glasur 750 ml
Durable high-gloss finish
Features:
good flow
mild odor
higher hardness
particularly universal
ideal on "nitrofest"
Can be used with our without hardener
Branth's S-Glasur's areas of application:
Ideal for use on "Brantho-Korrux nitrofest"
high weather resistance and surface hardness
Very mild odor during processing
Gloss, high opacity
For structures, gates, vehicles, machinery etc
Technical data in short form for comparison:
Brantho-Korrux
Top coats
3in1
Nitrofest
2-Kompo
Eco-Base
S-Glasur
Robust-paint
Yield
- caulculated 30 my
17,3 m²
16,6 m²
13,3 m²
13,9 m²
18,3 m²
16,8 m²
- practical
6 m²
6 m²
4 m²
5 m²
8 m²
8 m²
Drying times 20°C
- dust-dry
25 Min.
10 Min.
20 Min.
15 Min.
75 Min.
20 Min.
- dry to handle
100 Min.
60 Min.
40 Min.
40 Min.
6 Std.
100 Min.
- completely dried
10 Hours.
14 Hours.
8 Hours.
16 Hours.
36 Hours.
10 Hours.
- stackable
72 Hours.
16 Hours.
16 Hours.
6 Hours.
2 Days
3 Days
- 20 Min./60°C stackable
216 Hours.
45 Min.
1 Hour.
60 Min.
1 Day
5 Days
EU-VOC-legislation (g/l)
<400
<420
<380
<60
<350
<420
You need more than available? No problem, the paint is available from stock in large quantities.
Branth's S-Glasur 5 L
Durable high-gloss finish
Features:
good flow
mild odor
higher hardness
particularly universal
ideal on "nitrofest"
Can be used with our without hardener
Branth's S-Glasur's areas of application:
Ideal for use on "Brantho-Korrux nitrofest"
high weather resistance and surface hardness
Very mild odor during processing
Gloss, high opacity
For structures, gates, vehicles, machinery etc
Technical data in short form for comparison:
Brantho-Korrux
Top coats
3in1
Nitrofest
2-Kompo
Eco-Base
S-Glasur
Robust-paint
Yield
- caulculated 30 my
17,3 m²
16,6 m²
13,3 m²
13,9 m²
18,3 m²
16,8 m²
- practical
6 m²
6 m²
4 m²
5 m²
8 m²
8 m²
Drying times 20°C
- dust-dry
25 Min.
10 Min.
20 Min.
15 Min.
75 Min.
20 Min.
- dry to handle
100 Min.
60 Min.
40 Min.
40 Min.
6 Std.
100 Min.
- completely dried
10 Hours.
14 Hours.
8 Hours.
16 Hours.
36 Hours.
10 Hours.
- stackable
72 Hours.
16 Hours.
16 Hours.
6 Hours.
2 Days
3 Days
- 20 Min./60°C stackable
216 Hours.
45 Min.
1 Hour.
60 Min.
1 Day
5 Days
EU-VOC-legislation (g/l)
<400
<420
<380
<60
<350
<420
You need more than available? No problem, the paint is available from stock in large quantities.
Branth's Spezial Thinner 5 L
Paint thinner with mild odor and for all solvent-based Branth colors.
Features:
Strong dilution and slow evaporation, significantly stronger than Synthetic Resin Thinner or turpentine substitute
Free of aromatic compounds and xylene (WGK 1)
Color is kept open longer (designation as summer or Brushing Thinner)
Branth's Spezial-Thinner's areas of application:
Branth's Spezial Thinner is designed for all solvent-based Branth colors.
To adjust the viscosity
For cleaning the working devices (even in water-colours)
To delay drying
Use dilutions very economical
Close containers clompletely after use or clear completely
Information on the best-before date:
The best-before date on the paint cans indicates the minimum shelf life guaranteed by Branth for originally sealed cans when stored in a cool (10-20°C) and dry place.
The best-before date is NOT an expiry date!
Under the conditions described, the paint can generally be used for a further 5 years without complaint.
The date given should help you to use up older cans from your paint shelf first.
As long as the paint can be stirred perfectly and is homogeneous, it can be used without any problems.
Branth's spezial Thinner is also available in larger quantities within 2 days, regardless of the quantity currently available.
Branths Härter N farblos für 2K-Kompo 80 g
Merkmale:
80 g Härter für Brantho Korrux 2-Kompo
Für 720 g Stammlack
Mischungsverhältnis Stammlack : Härter = 9 : 1 (Gewicht)
farblos
Branths Härter N farblos für 2K-Flexi-Lack 125 g
Merkmale:
125 g Härter für Brantho Korrux 2K-Flexi-Lack
Für 500 g Stammlack
Mischungsverhältnis Stammlack : Härter = 4 : 1 (Gewicht)
farblos
Branths Härter N farblos für 2K-Anti-Graffic-Lack 125 g
Merkmale:
125 g Härter für Brantho Korrux 2K-Anti-Graffic-Lack
Für 500 g Stammlack
Mischungsverhältnis Stammlack : Härter = 4 : 1 (Gewicht)
farblos
Branths Härter Z34 für 2K-Durasolid 150 g
Merkmale:
150 g Härter für Brantho Korrux 2K-Durasolid
Für 825 g Stammlack
Mischungsverhältnis Stammlack : Härter = 5,5 : 1 (Gewicht), keine Vorreaktionszeit
farblos
Branths hardener Z34 for 2K-Durasolid 500 g
Features:
500 g hardener for Brantho Korrux 2K-Durasolid
For 2.75 kg base coat (2 cans of hardener are required per 5.5 kg base coat, MV 5.5:1)
colorless
Branth's Noble Varnish for Wood 5 liters
Features:
Protects wood from moisture absorption.
Proven, largely colorless impregnating and priming agent.
Very good penetration capacity, impregnates wood from the inside with resin and oil and thus prevents swelling and shrinkage of the wood.
Protects with predominantly natural resins and oils.
The wood becomes water-repellent, the resistance is strengthened and, if desired, the recoatability is improved.
For all softwoods and hardwoods, exterior and interior, for new or refinishing coats, especially for dried-out wood.
Biocide-free, heavy metal-free, aromatic-free, vegan.
Processing instructions:
Stir the contents of the can carefully before use. Only then apply: Brushing, dipping, rolling or spraying.
Depending on the absorbency of the substrate, apply one, two or, in special cases, three coats
Thinner:
Branth's Special Thinner, commercially available Plant Balsam Thinner, Synthetic Resin Thinner or Branth's Combination Thinner.
Do not use water.
Drying time:
Depending on the substrate, temperature, weather, air and wood moisture. In general, the surface is tack-free after 30 minutes and can be painted over by itself.
Paint over:
We recommend painting over with other paints from the following day.
Do not paint over with water-thinnable paints, as Branth's Edel-Firnis is water-repellent.
Underground:
If possible, only apply Branth's Edel-Firnis to absorbent substrates. The substrate must be dry and stable.
Thoroughly remove dirt, algae, fungi and mold. Sand down weathered surfaces.
Technical features:
Basic:
Resins and oils, dissolved in aromatic-free solvents.
lead-free, barium-free, cobalt-free.
free from preservatives, free from algicides and fungicides.
Shade:
slightly opaque
enhances the wood grain
Yield:
4-10 m²/ltr., depending on the absorbency of the wood
Branth's aluminum glaze 750 ml
Features:
Very good covering aluminum paint.
Proven over millions of square meters.
Temperature resistance up to 600 °C.
For heat-conducting pipes, boilers (outside), stove pipes, etc.
As a weather-resistant corrosion protection coating for iron structures, tanks, bridges, vehicles, machinery, ship superstructures and corrugated sheet metal roofs
As a heat-reflecting coating for tanks, containers, bunkers, partition walls and at the same time as a sealant on tar and bitumen roofs
As a highly heat-resistant coating for all industrial purposes, boilers, pipelines, chimneys. For coats that are exposed to heat and weather at the same time, allow to burn in evenly in dry conditions before exposure to weather.
Processing instructions:
Brushing, spraying and rolling in delivery viscosity. Stovable.
Drying (at 20° C / 65% relative humidity):
dust-dry: 1 hour
firm to the touch: 2 hours
fully cured: 24 hours
The drying time is highly dependent on weather conditions / heat.
Substrate treatment:
Iron and steel substrates must be free of rust, scale and grease.
Non-ferrous metals, wood, pressed and chipboard must be primed.
Suitable primer:
Brantho-Korrux "nitrofest" or "3 in 1", RMb or HgS, or others.
Technical features:
Basic:
Hydrocarbon resin (dissolved in solvents); with platelet-shaped, metallic aluminum
Contains no silicone and no silicone compounds; free from biocides; free from lead, zinc and chromate; free from cobalt compounds; MEKO/butanone oxime-free
Shade:
bright reflective silver
Yield:
1 liter is sufficient for approx. 12-15 m²
Brochure, processing instructions and data sheets can be found under "Downloads"
Technical data in short form for comparison:
Brantho-Korrux
Top coats
3in1
Nitrofest
2-Kompo
Eco-Base
S-Glasur
Robust-paint
Yield
- caulculated 30 my
17,3 m²
16,6 m²
13,3 m²
13,9 m²
18,3 m²
16,8 m²
- practical
6 m²
6 m²
4 m²
5 m²
8 m²
8 m²
Drying times 20°C
- dust-dry
25 Min.
10 Min.
20 Min.
15 Min.
75 Min.
20 Min.
- dry to handle
100 Min.
60 Min.
40 Min.
40 Min.
6 Std.
100 Min.
- completely dried
10 Hours.
14 Hours.
8 Hours.
16 Hours.
36 Hours.
10 Hours.
- stackable
72 Hours.
16 Hours.
16 Hours.
6 Hours.
2 Days
3 Days
- 20 Min./60°C stackable
216 Hours.
45 Min.
1 Hour.
60 Min.
1 Day
5 Days
EU-VOC-legislation (g/l)
<400
<420
<380
<60
<350
<420
Information on the best-before date:
The best-before date on the paint cans indicates the minimum shelf life guaranteed by Branth for originally sealed cans when stored in a cool (10-20°C) and dry place.
The best-before date is NOT an expiry date!
Under the conditions described, the paint can generally be used for a further 5 years without complaint.
The date given should help you to use up older cans from your paint shelf first.
As long as the paint can be stirred perfectly and is homogeneous, it can be used without any problems.
Brantho-Korrux is also available in larger quantities within 2 days, regardless of the quantity currently available.
Branth's aluminum glaze 5 liters
Features:
Highly opaque aluminum paint
Proven on millions of square meters.
Temperature resistance up to 600 °C.
For heat-conducting pipes, boilers (exterior), stove pipes and much more.
As a weather-resistant corrosion protection coating for iron structures, tanks, bridges, vehicles, machinery, ship superstructures and corrugated sheet metal roofs
As a heat-reflecting coating for tanks, containers, bunkers, partition walls and at the same time as a sealant on tar and bitumen roofs
As a highly heat-resistant coating for all industrial purposes, boilers, pipelines, chimneys. For coats that are exposed to heat and weather at the same time, allow to burn in evenly in dry conditions before exposure to weather.
Processing instructions:
Brushing, spraying and rolling in delivery viscosity. Stovable.
Drying (at 20° C / 65% relative humidity):
dust-dry: 1 hour
Touch-proof: 2 hours
fully cured: 24 hours
The drying time is highly dependent on weather conditions / heat.
Substrate treatment:
Iron and steel substrates must be free of rust, scale and grease. Non-ferrous metals, wood, pressed and chipboard must be primed.
Suitable primer:
Brantho-Korrux "nitrofest" or "3 in 1", RMb or HgS, or others.
Technical data in short form for comparison:
Brantho-Korrux
Top coats
3in1
Nitrofest
2-Kompo
Eco-Base
S-Glasur
Robust-paint
Yield
- caulculated 30 my
17,3 m²
16,6 m²
13,3 m²
13,9 m²
18,3 m²
16,8 m²
- practical
6 m²
6 m²
4 m²
5 m²
8 m²
8 m²
Drying times 20°C
- dust-dry
25 Min.
10 Min.
20 Min.
15 Min.
75 Min.
20 Min.
- dry to handle
100 Min.
60 Min.
40 Min.
40 Min.
6 Std.
100 Min.
- completely dried
10 Hours.
14 Hours.
8 Hours.
16 Hours.
36 Hours.
10 Hours.
- stackable
72 Hours.
16 Hours.
16 Hours.
6 Hours.
2 Days
3 Days
- 20 Min./60°C stackable
216 Hours.
45 Min.
1 Hour.
60 Min.
1 Day
5 Days
EU-VOC-legislation (g/l)
<400
<420
<380
<60
<350
<420
Technical features:
Basic:
Hydrocarbon resin (dissolved in solvents); with platelet-shaped, metallic aluminum
Contains no silicone and no silicone compounds; free from biocides; free from lead, zinc and chromate; free from cobalt compounds; MEKO/butanone oxime-free
Shade:
bright reflective silver
Yield:
1 liter is sufficient for approx. 12-15 m²
Brochure, processing instructions and data sheets can be found under "Downloads"
Branths Noble Varnish for Wood 750 ml
Features:
Protects wood from moisture absorption.
Proven, largely colorless impregnating and priming agent.
Very good penetration capacity, impregnates wood from the inside with resin and oil and thus prevents swelling and shrinkage of the wood.
Protects with predominantly natural resins and oils.
The wood becomes water-repellent, the resistance is strengthened and, if desired, the recoatability is improved.
For all softwoods and hardwoods, exterior and interior, for new or reconditioned coats, especially for dried-out wood.
Biocide-free, heavy metal-free, aromatic-free, vegan.
Processing instructions::
Stir the contents of the can carefully before use. Only then apply: Brushing, dipping, rolling or spraying.
Depending on the absorbency of the substrate, apply one, two or, in special cases, three coats
Dilution:
Branth's Special Thinner, commercially available Plant Balsam Thinner, Synthetic Resin Thinner or Branth's Combination Thinner.
Do not use water.
Drying times:
Dependent on substrate, temperature, weather, air and wood moisture.
In general, the surface is touch-proof after 30 minutes and can be painted over by itself.
Paint over:
We recommend painting over with other colors from the following day.
Do not paint over with water-thinnable paints, as Branth's Edel-Firnis is water-repellent.
Underground:
If possible, only apply Branth's Edel-Firnis to absorbent substrates. The substrate must be dry and stable.
Thoroughly remove dirt, algae, fungi and mold. Sand down weathered surfaces.
Technical features:
Base:
Resins and oils, dissolved in aromatic-free solvents.
lead-free, barium-free, cobalt-free.
free from preservatives, free from algicides and fungicides.
Shade:
slightly opaque
enhances the wood grain
Yield:
4-10 m²/ltr., depending on the absorbency of the wood
Branth's "3-in-1" hardener concentrate
Features:
Improves the properties of Brantho-Korrux 3-in-1
Please store in a dry place as the hardener is sensitive to moisture
Application:
Addition of 5-10 % Branth's "3-in-1" hardener concentrate
Quicker drying
Improved scratch resistance
Less sensitive surface
Information on the best-before date:
The best-before date on the paint cans indicates the minimum shelf life guaranteed by Branth for originally sealed cans when stored in a cool (10-20°C) and dry place.
The best-before date is NOT an expiry date!
Under the conditions described, the paint can generally be used for a further 5 years without complaint.
The date given should help you to use up older cans from your paint shelf first.
As long as the paint can be stirred perfectly and is homogeneous, it can be used without any problems.
Branths hardener concentrate is also available in larger quantities within 2 days, regardless of the quantity currently available.
Branth´s RMb Mennige Rust Prevention, 750 ml
High quality primer with optimized corrosion protection properties of iron and steel.
Contents:
Titanium compounds, which are resistant to corrosion
Barrier pigments, which shield the ground against corrosive media quality
Anti-corrosion pigments which cause electrochemical corrosion
liquid corrosion inhibitors, with special creep
Special binders, optimal adhesion to the substrate and intermediate adhesion to subsequent coatings
proven chemical solvents combined with novel solvents from renewable resources
low solvent content
contains no lead, no zinc, no chromates, no isocyanates, no harmful aromatics solvents such as xylene
Features:
Orange and matt.
Can be painted over immediately with Brantho-Korrux "3 in 1" or Branth's-robust paint or not later than the next day by usual 1-component or 2-component intermediate or top coats.
No sanding necessary
Not classified according to EEC. The usage is neither dangerous nor environmentally harmful
High filling: good corrosion protection and edge protection for repainting, maintenance paintings or the paint spot prime.
Application: by brush or roller in one component of delivery, or by some combination of splash by adding dilution.
Branth's RMb Mennige Rust Prevention's areas of application:
Corrosion protection of parts and structures made of iron and steel in rural, urban, industrial and marine atmosphere
For new and Retouch painting
As active corrosion protective primer for topcoats based on alkyd, acrylic, PVC, polyester, cyclorubber, bitumen, PU etc.
Corrosion protection of vehicles, machinery, vehicle components, transport racks, etc.
As a primer and filler at the same time for object coatings or parts production.
Ideal für handwerkliche Verarbeitung.
Branth's RMb Mennige Rust prevention can be used for rust, hand prepared surfaces and wet blasted surfaces.
Always ensures optimum corrosion protection and a very good adhesion to old paint.
Information on the best-before date:
The best-before date on the paint cans indicates the minimum shelf life guaranteed by Branth for originally sealed cans when stored in a cool (10-20°C) and dry place.
The best-before date is NOT an expiry date!
Under the conditions described, the paint can generally be used for a further 5 years without complaint.
The date given should help you to use up older cans from your paint shelf first.
As long as the paint can be stirred perfectly and is homogeneous, it can be used without any problems.
Branth's Mennige Rust Preventation is also available in larger quantities within 2 days, regardless of the quantity currently available.
Branth's Spezial-Thinner 750 ml
Paint thinner with mild odor and for all solvent-based Branth colors.
Features:
Strong dilution and slow evaporation, significantly stronger than Synthetic Resin Thinner or turpentine substitute
Free of aromatic compounds and xylene (WGK 1)
Color is kept open longer (designation as summer or Brushing Thinner)
Branth's Spezial-Thinner's areas of application:
To adjust the viscosity
For cleaning the working devices (even in water-colours)
To delay drying
Use dilutions very economical
Close containers clompletely after use or clear completely
Information on the best-before date:
The best-before date on the paint cans indicates the minimum shelf life guaranteed by Branth for originally sealed cans when stored in a cool (10-20°C) and dry place.
The best-before date is NOT an expiry date!
Under the conditions described, the paint can generally be used for a further 5 years without complaint.
The date given should help you to use up older cans from your paint shelf first.
As long as the paint can be stirred perfectly and is homogeneous, it can be used without any problems.
Branth's Spezial Thinner is also available in larger quantities within 2 days, regardless of the quantity currently available.
Brennerhals Type 15 flexibel
Gewinde im Griffstück: 8 mm
Gasdüsen-Innendurchmesser: 12 mm
incl. Haltefeder, ohne Düsen
Problemlösung für sehr beengte Stellen
