Skip to main content Skip to search Skip to main navigation
  +49 241 559713   Mon.-Thurs. 9 am-5 pm, Fri. 9 am-3 pm        30 years experience        Certified shop        Fast shipping
Go to homepage

Fertan Protewax, Protection Wax, Spray Can, 400 ml

Product information "Fertan Protewax, Protection Wax, Spray Can, 400 ml "

Fertan PROTEWAX BP 527 Schutzwachs, 400 ml

 

PROTEWAX is a quick-drying, abrasion- and weather-resistant solution for excellent corrosion protection 
 

Features:

  • Perfectly suited for new coats and vehicle restorations
  • 1K solution - special coating and primer in one
  • Silky gloss, transparent and UV-resistant
  • Easy to apply and quick-drying
  • Long-lasting corrosion protection and exceptional durability on many surfaces
    • Zinc
    • Iron
    • Concrete
    • Masonry
  • Ideal coating agent for a wide range of applications
    • Automotive components
    • Stair railings
    • Window grilles
    • Garden fences
    • Gates
    • Containers
    • Machinery
    • Roofing and much more
 

Drying time:

  • Dust dry: approx. 20 min.
  • Touch-dry: approx. 60 min.
  • Recoatable: approx- 3-4 h
 

Application:

  • The substrate must always be clean, dry, sound, non-slip and free from substances that could impair adhesion, such as grease, wax or polishing agents, and should be at room temperature if possible.
  • The surfaces to be coated must be checked for suitability and load-bearing capacity for subsequent coatings.
  • Careful cleaning and degreasing is required to achieve reliable adhesion.
 

Hazard warnings

Extremely flammable aerosol. Pressurized container: May burst if heated. Causes serious eye irritation. May cause drowsiness and dizziness.
 

Safety instructions

Keep out of the reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Wear protective gloves/protective clothing/eye protection/face protection. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing. If eye irritation persists: Seek medical advice/attention. Protect from sunlight and do not expose to temperatures exceeding 50 °C/122 °F.

Further information can be found in the data sheet in the "Downloads" tab.
 

Filling Volume: 0.4

Product Safety and Downloads

Documents and datasheets

Product safety information

Manufacturer

Fertan GmbH
Saar-Lor-Lux-Straße 14
66115 Saarbrücken
Germany
Verkauf@FERTAN.de

Safety information
  • Highly flammable liquid and vapor.
  • Causes serious eye damage. May cause drowsiness and dizziness.
  • Causes skin irritation.
Skip product gallery

Zubehör

Maler-Abdeckband 25 mm, 50 m lösemittelbeständig
Maler-Abdeckband Spitzenqualität Breite: 25 mm Länge: 50 m Lösemittelbeständig hitzebständig bis 50°C

Regular price: €5.95
Maler-Abdeckband 50 mm, 50 m lösemittelbeständig
Maler-Abdeckband Spitzenqualität Breite: 50 mm Länge: 50 m Lösemittelbeständig hitzebständig bis 50°C

Regular price: €9.99
Pinsel-Set "Anstrich" je 3 Rund- & Flachpinsel
Pinselset für Anstricharbeiten z.B. für Brantho-Korrux Nitrofest, Owatrol-Produkte, Fertan Rostschutz etc Rundpinsel Größe 2, 4 und 6 Flachpinsel 25, 40 Universalpinsel Größe 3

Regular price: €9.99
Rundpinsel Profiausführung Größe 08
Ringpinsel Gr. 08 Durchmesser ca. 28 mm Profi-Handwerkerpinsel Reine, schwarze Chinaborste mehrfach gekocht geschüsselt doppelter Kunststoffvorband Nickelring roher Holzstiel

Regular price: €4.95
Rundpinsel Profiausführung Größe 10
Ringpinsel Gr. 10 Durchmesser ca. 34 mm Profi-Handwerkerpinsel Reine, schwarze Chinaborste mehrfach gekocht geschüsselt doppelter Kunststoffvorband Nickelring roher Holzstiel

Regular price: €6.95
Rundpinsel Profiausführung Größe 12
Ringpinsel Gr. 12 Durchmesser ca. 40 mm Profi-Handwerkerpinsel Reine, schwarze Chinaborste mehrfach gekocht geschüsselt doppelter Kunststoffvorband Nickelring roher Holzstiel

Regular price: €6.84
Flachpinsel Profiausführung Stärke 3" 75 mm
Flachpinsel Profiausführung Stärke 3" 75 mm   Merkmale: Profi-Handwerkerpinsel / Flachpinsel helle Borstenmischung 3" = 75 mm / Borstenlänge 44 mm Weißblechzwinge Holzstiel unlackiert Spitzenqualität   Technische Merkmale: Länge des Artikels: 230 mm Breite des Artikels: 75 mm Höhe des Artikels: 8 mm Gewicht: 44 g

Regular price: €7.95
Lackwanne 16 x 31 cm lösemittelbeständig
Lackwanne 16 x 31 cm 100 % Polypropylen lösemittelbeständig bruchfest mit Abstreifrillen

Regular price: €1.95
Lackierwalzen-Griff 28 cm für 10 cm Walzen
Kleinroller-Bügel kurz Komfort-Griff zum Aufstecken auf Teleskopstangen geeignet Länge: 28 cm für 10 cm Walzenbreite ergonomisch geformt Drahtstärke: 6 mm

Regular price: €2.95
Lackierwalze Mohair 10 cm lösemittelbeständig
Lackierwalze Mohair Spitzenqualität echtes Ziegenhaar extra kurzflorig lösemittelbeständig für hochwertige Lackierungen für 6 mm Steckbügel Breite 10 cm

Regular price: €3.15
Universal-Abdeckplane Folie 4 x 5 m
4 x 5 m Stärke : 30µ

Content: 20 m² (€0.10 / 1 m²)

Regular price: €1.95
Fertan Hansalin Manulin Hand cleaning cream 3 l
Fertan Hansalin Manulin Hand cleaning cream   Features: powerful, deep-cleansing, oil-in-water emulsion suitable for dispenser-application, which easily removes stubborn dirt, such as synthetic resins, cellulose paints, lithography printing inks, oils, greases, even graphite oils and grease, tar, bitumen, rubber-residue etc. traditionally removed by solvent-based cleaners. primarily based on natural ingredients and contains natural cold-pressed oils and lanolin to care for the skin and maintain its moisture balance. Its deep cleaning action is enhanced by the addition of specially formulated micro-granules. dermatologist tested and is pH-balanced. environmentally friendly and uses only biodegradable surfactants economical to use, with only 2-3 mls being enough to clean the hands thoroughly. Instructions for use: Rub a little MANULIN into dry hands to loosen the dirt. Rinse thoroughly with water and dry. If water is not available, MANULIN can simply be wiped of with cloth.

Content: 3 l (€6.65 / 1 l)

Regular price: €19.95
BGS 3622 Safety Glasses, transparent
BGS 3622 Safety Glasses, transparent Features:BGS 3622 Safety Glasses, transparentwith rubber bandsuitable for spectacle wearerswith soft PVC framewith ventilation holes for fog-free view Technical features:Packaging suitable for wall hanging: YesWindow colour: TransparentEN: 166 Gross weight: 78 gEAN: 4026947036229

Regular price: €3.95
BGS 3171 Steel Wire Brush, 260 mm
BGS 3171 Steel Wire Brush, 260 mm Features:BGS 3171 Steel Wire Brush, 260 mm Technical features:Handle material: PlasticGross weight: 110 gEAN: 4026947031712

Regular price: €1.95
BGS 3173 Wire Brush, brass, 260 mm
BGS 3173 Wire Brush, brass, 260 mm Features:BGS 3173 Wire Brush, brass, 260 mmpolypropylene handle Technical features:Gross weight: 110 gEAN: 4026947031736

Regular price: €3.95
BGS 9953 Mechanic's Gloves, Size 9 (L)
BGS 9953 Mechanic's Gloves, Size 9 (L) Features:BGS 9953 Mechanic's Gloves, Size 9 (L)partly PU coatedgood fit and secure gripgood sense of touchknitwristsuitable for: tire service Technical features:Gross weight: 50 gSize: 9 (L) DIN standard: EN 388 - CAT II (3131X) EAN: 4026947099538

Regular price: €2.13
BGS 9406 Plastic Plug Assortment, 58 pcs.
BGS 9406 Plastic Plug Assortment, 58 pcs. Features:BGS 9406 Plastic Plug Assortment, 58 pcs.for closing the following bore sizes:10 plugs Ø 10.0 mm10 plugs Ø 13.4 mm10 plugs Ø 13.5 mm8 plugs Ø 19.4 mm10 plugs Ø 19.5 mm10 plugs Ø 22.2 mmin assortment box Technical features:Gross weight: 140 gPackaging suitable for wall hanging: YesEAN: 4026947094069

Regular price: €11.95
ELIX Hand Cleaning Wipes 310 x 270 mm, 90 pieces
ELIX Hand Cleaning Wipes 310 x 270 mm, 90 pieces   ELIX strong, waterless hand cleaning wipes in a bucket. Cleans hands, tools, parts, and equipment.   Features: 90 strong hand cleaning wipes in a bucket. 310 x 270 mm per wipe with double texture. Cleans hands, tools, parts, and equipment. Can be used without water. Removes: adhesives, bitumen, coal dust, graphite, dirt, heavy grease, ink, lubricants, oils, paints, tar, wax, epoxy resins, urethane, and many other difficult-to-remove contaminants. Highly economical packaging size for direct use in your workshop or workplace.   ELIX is a dermatologically tested, powerful, and effective waterless hand cleaning system that combines a high-quality orange-based liquid formula with durable and gently abrasive double-textured wipes. The strong, dual-layer wipes first loosen the dirt from your hands and then absorb it into the wipe, preventing it from transferring back onto your hands. Your hands stay truly clean. No rinsing or washing required. ELIX removes dirt, tar, oils, heavy grease, wax, adhesives, epoxy resins, urethane, paints, inks, dyes, and many other hard-to-remove contaminants. ELIX can be used without water, anytime, anywhere.  

Content: 90 pcs (€0.19 / 1 pcs)

Regular price: €16.95
Mueller 277 010 Clip Lifter 5 mm half-round
Mueller 277 010 Clip Lifter 5 mm half-round   Features: Mueller 277 010 Clip Lifter 5 mm half-round​ For plastic fasteners, plastic clips, upholstery or door panels. Dimensions: Length 175 mm Width 5 / 14 mm  

Regular price: €19.95
Fertan Wachs- und Fettentferner 500 ml Spray
Fertan Wachs- und Fettentferner 500 ml Spray   Produktbeschreibung: Beim FERTAN Wachs- und Fettentferner handelt es sich um ein speziellen Reiniger für Konservierungswachse, Fette und auch Öle. Es besteht aus ausgewähltem paraffinischen Siedeschnitte. Die Verträglichkeit mit Decklacken, Anbauteilen und anderen Materialien ist für jeden Anwendungszweck gesondert zu prüfen.   Merkmale: Aromatenfrei / Geruchsarm Hoher Wirkstoffanteil von 97 % Kunststoff- und Lackverträglich Trocknet rückstandsfrei ab   Applikation: Sprühapplikation. Auf zu reinigenden Bereich auftragen und nach 1-2 Minuten Wartezeit mit einem sauberen, saugfähigen Tuch abreiben. Rückstände des Reinigers trocknen nach ca. 60 Minuten rückstandsfrei ab.   Gefahrenhinweise: Behälter steht unter Druck: kann bei Erwärmung bersten. Wiederholter Kontakt kann zu spröder oder rissiger Haut führen. ACHTUNG: UN 1950   Sicherheitshinweise: Von Hitze, heißen Oberflächen, Funken, offenen Flammen und anderen Zündquellen fernhalten. Nicht rauchen. Nicht durchstechen oder verbrennen, auch nicht nach Gebrauch. Nebel/Dampf/Aerosol nicht einatmen. Nur im Freien oder in gut belüfteten Räumen verwenden. Schutzhandschuhe / Augenschutz tragen. BEI EINATMEN: Die Person an die frische Luft bringen und für ungehinderte Atmung sorgen. Vor Sonnenbestrahlung schützen. Nicht Temperaturen über 50 °C/122 °F aussetzen. Entsorgung des Inhalts / des Behälters gemäß den örtlichen / regionalen / nationalen/ internationalen Vorschriften.

Content: 0.5 l (€29.90 / 1 l)

Regular price: €14.95
Fertan Rust Converter, 1 Liter, Standard Can
  Fertan Rust Converter, 1 Liter   The FERTAN rust converter is the perfect rust converter. With the FERTAN rust converter you can easily remove strong rust. For optimal rust removal.   Features: 1 litre standard dose for the removal of rust and corrosion of carbon steel for vehicles, vehicle parts and fuel tanks, car body cavities for metal constructions, ships, ship parts, port facilities for steel halls, conservatories and other carbon steel components Proven for decades in restoration the surface to be treated must be free of dirt, oil, grease and silicone, i. e. metallically clean, but not rust-free   Fertan Rust converter advantages: As a rust converter, FERTAN dissolves the existing rust layer (Fe3) and decomposes it into a non-reactive powder. The non-corrosive Fe2 layer underneath is protected with the new metal bond and the previously corroded metal can be provided with the required final protection within 6 months. This can be used in paint, varnish, wax, tar, zinc, epoxy resin, etc. e. be. FERTAN rust converter can be used successfully on slightly rusted, strong rust and also on bare metal. The protective effect is achieved in principle. The product is also water-based for environmental reasons. For this reason, the surface to be treated must be free of dirt, oil, grease and silicone, i. e. metallic clean, but not rust-free. Only with extremely strong rust layers, over 5 mm, a second treatment may be necessary. However, use FERTAN only at temperatures above 5°C and leave on for about 24 – 48 hours. Always clean the surface with water before the final treatment. The FERTAN rust converter can be used even on damp surfaces and is free of pollutants.   Application: FERTAN Rust converter Application: (Shake before use) Remove loose rust and prepare a smooth lacquerable surface for the surface to be painted later. (e. g. by grinding) Before applying FERTAN, it is important to clean surfaces of oil, grease, silicone and dirt. Apply FERTAN using a clean brush, roller or spray gun.   Temperature information: Allow FERTAN to act at temperatures above 20°C for 24 hours. In dry environment or direct sunlight, moisten slightly after 1-2 hours (fog moisture). At temperatures of 5 – 19° C, extend the reaction time to approx. 48 hours, or longer. Do not use in frost and temperatures below 5° C!   Surface turns black – blue violet Ideal for post-treatment after 6 months at the latest: Filler, primer (FERPOX, MM30), colour, cavity protection wash and underbody protection waxes (UBS 240), EP resins etc. Only rinse the surface with water before further treatment (the surface should not be damaged mechanically, otherwise the protective layer will be destroyed – no grinding, etc. ) This black, blue-violet surface can be overpainted with all conventional primers and varnishes, 1 litre of FERTAN is sufficient for approx. 12 – 15m2 surface when applied with a brush. FERTAN may cause stains on bright surfaces and absorbent surfaces, so cover them and wash splashes immediately with water, avoiding any open-pored material (e. g. wood, concrete, etc. ) that should not be processed. Clean tools after use with clear water. Wear protective clothing and follow safety instructions.    

Regular price: €28.95
Fertan UBS 240, Underbody Protection Wax, 1 Liter
Fertan Underbody protection wax, 1 Liter Features: Fertan UBS 240 is an underbody protection wax for long-term protection PVC-compatible, in a transparent to slightly amber color. The "amber effect" is reinforced, the more of the product is being applied. Fertan UBS 240 is an ideal protective wax-based product, especially for underbodies of motor vehicles Can be used even in extreme conditions to protect over long term. Fertan can also be applied to lacquered underbodies. Highly flammable Irritant Environmental damaging

Regular price: €14.95