Proxxon 28510 Mill/drill unit MICROMOT 60/E

€29.95*

Content: 1 pcs

Prices incl. VAT plus shipping costs

Available, delivery time: 2 working days

Available₁: 3 unit(s)

Stk

Product number: 1843269

Manufacturer no.: 28510

EAN: 4006274285101

Weight in kg: 0.38

Product information "Proxxon 28510 Mill/drill unit MICROMOT 60/E "

PROXXON 28510 Mill/drill unit MICROMOT 60/E

Features:

With a diameter of only 35mm it is unsurpassed easy to manage. Besides the weight of only approx. 230g, the effortless drive via balanced motor with ground spindle and collar bearing allows for quiet run with a pleasing sound to the ear.
The high-quality MICROMOT steel collets ensure accurate clamping of the cutters, without rattling or vibrating of bits and cutters.
The size of the machine dictates a 12V drive system, use of a mains adapter of at least 1.0A is thus required.
We recommend MICROMOT mains adapters NG 2/S, NG 2/E or NG 5/E.
High precision:
- Due to ball bearing spindle
- Special balanced, low noise DC motor with high life expectancy
Variable electronic speed control with feedback effect (high engine power also at lower speeds)
Housing of glass-fibre reinforced POLYAMIDE with soft component in the finger grip area
20 mm-collar for fitting MICROMOT accessories
Six MICROMOT steel collets: one each of 1,0 - 1,5 - 2,0 - 2,4 - 3,0 and 3,2 mm are included

Technical data:

Direct voltage 12 - 18V
Power consumption max. 40W
Stroke speed 5,000 - 20,000rpm
Length 220mm
Weight 230g

Product Safety and Downloads

Documents and datasheets

Safety Instructions

Product safety information

Manufacturer

PROXXON S.A.
Härebierg 6-10
6868 Wecker
Luxembourg
i@proxxon.com

Zubehör

Proxxon 28704 MICROMOT mains adapter NG 5/E

PROXXONcolor> 28704 MICROMOT mains adapter NG 5/E Features: With superior capacity of 5A In compact NORYL casing (heat resistant - recommended for transformers) Variable speed control with feedback effect for optimum tool speed and high torque at low speeds Three polarised sockets for MICROMOT machines A pair of sockets for standard banana plugs (4mm diameter) is also supplied Master switch for turning off the transformer without needing to unplug Red LED indicates 'ready' PTC (Positive temperature coefficient) protection against overload: Plugged in machine will not restart automatically - after cooling down, the mains plug should briefly be unplugged to reset the adapter With storage holes for tools with 2.35mm and 3mm shafts Foldable tool rest for the MICROMOT tool Technical data: 220 - 240 V Supplies 5.0A at 16 Volt open circuit and 12 Volt under load Weight 2.000 g Class 2 insulation Note: Power consumption of hand-held power tools is measured according to the internationally accepted ICE-745-1 specification The current drawn is measured, not the power consumption with a hot motor just before stalling In practice, this condition seldom appears, if ever All PROXXON mains adapters are suitably dimensioned for the recommended purposes The adapters do not include the illustrated mill/drill units!

€64.95*

Prices incl. VAT plus shipping costs

Proxxon 28700 Footswitch FS

PROXXONcolor> 28700 Footswitch FS Features: For all machines with a Euro plug (class 2 insulation) and maximum power absorption of 500W Ideal for both portable and stationary machines Housing of glass-fibre reinforced NYLON The connecting cord (230V) is 250cm in length and the output cord 50cm The transformer is connected to the FS when using 12V machines

€18.50*

Prices incl. VAT plus shipping costs

Proxxon 28815 Spare arbors, 5 pieces

PROXXONcolor> 28815 Spare arbors, 5 pieces Features: Shaft 2.35 x 44mm

Content: 5 pcs (€0.83* / 1 pcs)

€4.15*

Prices incl. VAT plus shipping costs

Proxxon 28992 MICROMOT extension cord. 300cm

PROXXONcolor> 28992 MICROMOT extension cord (300 cm) Features: Plug and wall-socket reverse polarity-protected For all 12V machines

€7.15*

Prices incl. VAT plus shipping costs

Proxxon 28707 MICROMOT mains adapter NG 2/E

PROXXON 28707 MICROMOT mains adapter NG 2/E Features: NORYL casing (heat resistant - a necessity for transformer enclosures) Polarised socket for MICROMOT plug Red LED indicates readiness for use PTC (Positive temperature coefficient) element prevents overload (and plugged in tool will not automatically restart). After cooling down the mains plug should be disconnected briefly to reset the adapte After cooling down the mains plug should be disconnected briefly to reset the adapter With holes for storing bits Foldable tool rest provides a secure place for keeping the MICROMOT tools at the ready Variable speed control with feedback effect for adjusting bit speed to suit the job, as well as providing high torque at low speeds Technical data: 220 - 240 V Supplies 2.0A at 16 Volt open circuit and 12 Volt under load Weight 1.000 g Class 2 insulation Note: Power consumption of hand-held power tools is measured according to the internationally accepted ICE-745-1 specification The current drawn is measured, not the power consumption with a hot motor just before stalling In practice, this condition seldom appears, if ever All PROXXON mains adapters are suitably dimensioned for the recommended purposes The adapters do not include the illustrated mill/drill units!

€30.95*

Prices incl. VAT plus shipping costs

Proxxon 28706 MICROMOT mains adapter NG 2/S

PROXXONcolor> 28706 MICROMOT mains adapter NG 2/S Features: NORYL casing (heat resistant - a necessity for transformer enclosures) Polarised socket for MICROMOT plug Red LED indicates readiness for use PTC (Positive temperature coefficient) element prevents overload (and plugged in tool will not automatically restart). After cooling down the mains plug should be disconnected briefly to reset the adapter With holes for storing bits Foldable tool rest provides a secure place for keeping the MICROMOT tools at the ready Technical data: 220 - 240 V Supplies 2.0A at 16 Volt open circuit and 12 Volt under load Weight 1.000 g Class 2 insulation Note: Power consumption of hand-held power tools is measured according to the internationally accepted ICE-745-1 specification The current drawn is measured, not the power consumption with a hot motor just before stalling In practice, this condition seldom appears, if ever All PROXXON mains adapters are suitably dimensioned for the recommended purposes The adapters do not include the illustrated mill/drill units!

€26.95*

Prices incl. VAT plus shipping costs

Proxxon 28510 Mill/drill unit MICROMOT 60/E

PROXXON 28510 Mill/drill unit MICROMOT 60/E Features: With a diameter of only 35mm it is unsurpassed easy to manage. Besides the weight of only approx. 230g, the effortless drive via balanced motor with ground spindle and collar bearing allows for quiet run with a pleasing sound to the ear. The high-quality MICROMOT steel collets ensure accurate clamping of the cutters, without rattling or vibrating of bits and cutters. The size of the machine dictates a 12V drive system, use of a mains adapter of at least 1.0A is thus required. We recommend MICROMOT mains adapters NG 2/S, NG 2/E or NG 5/E. High precision: Due to ball bearing spindle Special balanced, low noise DC motor with high life expectancy Variable electronic speed control with feedback effect (high engine power also at lower speeds) Housing of glass-fibre reinforced POLYAMIDE with soft component in the finger grip area 20 mm-collar for fitting MICROMOT accessories Six MICROMOT steel collets: one each of 1,0 - 1,5 - 2,0 - 2,4 - 3,0 and 3,2 mm are included Technical data: Direct voltage 12 - 18V Power consumption max. 40W Stroke speed 5,000 - 20,000rpm Length 220mm Weight 230g

€29.95*

Prices incl. VAT plus shipping costs