Proxxon 28512 MICROMOT 50/EF

€29.95*

Content: 1 pcs

Prices incl. VAT plus shipping costs

Available, delivery time: 2 working days

Available₁: 4 unit(s)

Stk

Product number: 1843270

Manufacturer no.: 28512

EAN: 4006274285125

Weight (kg): 0.36

Product information "Proxxon 28512 MICROMOT 50/EF "

PROXXON 28512 MICROMOT 60/EF

Features:

Slim, easily handled and ligh
Quick-action chuck and electronic revolutions adjustment, with feedback effect (high engine power in the lower revolutions area)
Special, balanced, low noise DC motor with high life expectancy
A transformerof at least 1.0A is required for operation
We recommend MICROMOT mains adapters NG 2/S, NG 2/E or NG 5/E

Technical data:

Direct voltage 12 - 18V
Power absorption 40W
Stroke speed 5,000 - 20,000rpm
Length 220mm
Weight 230g

Note:

The MICROMOT 50/EF can also be fitted with MICROMOT steel collets
This is recommended when milling continuously at high lateral pressure
This makes it impossible for the shafts to become loosened after prolonged working
Using collets makes true running better than using the quick-action chuck

Micromot devices:	Drilling / milling device

Toolaro.gprs.title

Toolaro.gprs.docs_and_sheets

Safety Instructions

Toolaro.gprs.productsafety

Toolaro.gprs.manufacturer

PROXXON S.A.
Härebierg 6-10
6868 Wecker
Luxembourg
i@proxxon.com

Zubehör

Proxxon 28815 Spare arbors, 5 pieces

PROXXONcolor> 28815 Spare arbors, 5 pieces Features: Shaft 2.35 x 44mm

Content: 5 pcs (€0.83* / 1 pcs)

€4.15*

Prices incl. VAT plus shipping costs

Proxxon 28704 MICROMOT mains adapter NG 5/E

PROXXONcolor> 28704 MICROMOT mains adapter NG 5/E Features: With superior capacity of 5A In compact NORYL casing (heat resistant - recommended for transformers) Variable speed control with feedback effect for optimum tool speed and high torque at low speeds Three polarised sockets for MICROMOT machines A pair of sockets for standard banana plugs (4mm diameter) is also supplied Master switch for turning off the transformer without needing to unplug Red LED indicates 'ready' PTC (Positive temperature coefficient) protection against overload: Plugged in machine will not restart automatically - after cooling down, the mains plug should briefly be unplugged to reset the adapter With storage holes for tools with 2.35mm and 3mm shafts Foldable tool rest for the MICROMOT tool Technical data: 220 - 240 V Supplies 5.0A at 16 Volt open circuit and 12 Volt under load Weight 2.000 g Class 2 insulation Note: Power consumption of hand-held power tools is measured according to the internationally accepted ICE-745-1 specification The current drawn is measured, not the power consumption with a hot motor just before stalling In practice, this condition seldom appears, if ever All PROXXON mains adapters are suitably dimensioned for the recommended purposes The adapters do not include the illustrated mill/drill units!

€64.95*

Prices incl. VAT plus shipping costs

Proxxon 28941 Three-jaw steel drill chuck

PROXXON 28941Three-jaw steel drill chuck (0,3 - 3,2 mm) Features: For use with MICROMOT rotary tools Precision drill grinder FBS 12/EF, Precision drill/grinder FBS 240/E, MICROMOT 60/EF and Flexishaft 110/BF. Advantageous when working with different shafts. Capacity 0.3 - 3.2mm.

€5.50*

Prices incl. VAT plus shipping costs

Proxxon 28700 Footswitch FS

PROXXONcolor> 28700 Footswitch FS Features: For all machines with a Euro plug (class 2 insulation) and maximum power absorption of 500W Ideal for both portable and stationary machines Housing of glass-fibre reinforced NYLON The connecting cord (230V) is 250cm in length and the output cord 50cm The transformer is connected to the FS when using 12V machines

€18.50*

Prices incl. VAT plus shipping costs

Proxxon 28706 MICROMOT mains adapter NG 2/S

PROXXONcolor> 28706 MICROMOT mains adapter NG 2/S Features: NORYL casing (heat resistant - a necessity for transformer enclosures) Polarised socket for MICROMOT plug Red LED indicates readiness for use PTC (Positive temperature coefficient) element prevents overload (and plugged in tool will not automatically restart). After cooling down the mains plug should be disconnected briefly to reset the adapter With holes for storing bits Foldable tool rest provides a secure place for keeping the MICROMOT tools at the ready Technical data: 220 - 240 V Supplies 2.0A at 16 Volt open circuit and 12 Volt under load Weight 1.000 g Class 2 insulation Note: Power consumption of hand-held power tools is measured according to the internationally accepted ICE-745-1 specification The current drawn is measured, not the power consumption with a hot motor just before stalling In practice, this condition seldom appears, if ever All PROXXON mains adapters are suitably dimensioned for the recommended purposes The adapters do not include the illustrated mill/drill units!

€26.95*

Prices incl. VAT plus shipping costs

Proxxon 28992 MICROMOT extension cord. 300cm

PROXXONcolor> 28992 MICROMOT extension cord (300 cm) Features: Plug and wall-socket reverse polarity-protected For all 12V machines

€7.15*

Prices incl. VAT plus shipping costs

Proxxon 28707 MICROMOT mains adapter NG 2/E

PROXXON 28707 MICROMOT mains adapter NG 2/E Features: NORYL casing (heat resistant - a necessity for transformer enclosures) Polarised socket for MICROMOT plug Red LED indicates readiness for use PTC (Positive temperature coefficient) element prevents overload (and plugged in tool will not automatically restart). After cooling down the mains plug should be disconnected briefly to reset the adapte After cooling down the mains plug should be disconnected briefly to reset the adapter With holes for storing bits Foldable tool rest provides a secure place for keeping the MICROMOT tools at the ready Variable speed control with feedback effect for adjusting bit speed to suit the job, as well as providing high torque at low speeds Technical data: 220 - 240 V Supplies 2.0A at 16 Volt open circuit and 12 Volt under load Weight 1.000 g Class 2 insulation Note: Power consumption of hand-held power tools is measured according to the internationally accepted ICE-745-1 specification The current drawn is measured, not the power consumption with a hot motor just before stalling In practice, this condition seldom appears, if ever All PROXXON mains adapters are suitably dimensioned for the recommended purposes The adapters do not include the illustrated mill/drill units!

€30.95*

Prices incl. VAT plus shipping costs

Proxxon 28940 MICROMOT-steel collet set, 6 pieces

PROXXONcolor> 28940 MICROMOT-steel collet set, 6 pieces Features: Triple slit and hardened 1 each of 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2mm With clamping nut and holder for storage

Content: 6 pcs (€1.46* / 1 pcs)

€8.75*

Prices incl. VAT plus shipping costs

Proxxon 28512 MICROMOT 50/EF

PROXXON 28512 MICROMOT 60/EF Features: Slim, easily handled and ligh Quick-action chuck and electronic revolutions adjustment, with feedback effect (high engine power in the lower revolutions area) Special, balanced, low noise DC motor with high life expectancy A transformerof at least 1.0A is required for operation We recommend MICROMOT mains adapters NG 2/S, NG 2/E or NG 5/E Technical data: Direct voltage 12 - 18V Power absorption 40W Stroke speed 5,000 - 20,000rpm Length 220mm Weight 230g Note: The MICROMOT 50/EF can also be fitted with MICROMOT steel collets This is recommended when milling continuously at high lateral pressure This makes it impossible for the shafts to become loosened after prolonged working Using collets makes true running better than using the quick-action chuck

€29.95*

Prices incl. VAT plus shipping costs