Hazet 7280-2sTAC Torque wrench w. built-in angle gauge electronic · SmartTAC SYSTEM 7000 sTAC · 1-10Nm For high-precision screw connections with torque/rotation angle calling for high accuracy or mandatory documentation, e.g. engine components especially cylinder head bolts, machine construction with increased requirements (including robot technology etc.)    Features: Smart technology - Ready for Industry 4.0 Delivery includes insert reversible ratchet 6401-1 square 6.3 = 1/4" Length with / without insert tool: 290.5 mm / 260 mm HAZET Smart Technology consisting of the optional smartTAC app and Bluetooth Low Energy interface (may be subject to national approval restrictions) with flawless live data exchange to display the screwing process on mobile end devices such as smartphones (Smartwatch) and tablet PCs as well as via a USB-C interface for programming the torque wrench with built-in angle gauge and documentation of the screwing data via laptop and PC All sTAC torque wrenches can also be used autonomously, without SmartTAC app Unique ergonomic, user-oriented HAZET design of entire tool for professional use The reduction in size and integration of the PCB into the main pipe, results in dimensions that allow for the small torque wrench with built-in angle gauge from 1 Nm Protection class IP 40 Spray-water-proof display and membrane keyboard Tested in accordance with DIN EN ISO 6789-2:2017 USB-C interface for programming torque wrenches with built-in angle gauge and for documentation of the screwing data via laptop and PC Including standard replaceable Li ion rechargeable battery, type 14650 / 3,7 Volt, can be charged directly on the tool via USB-C connector Including 1 metre USB 3.1 / A-C cable    Functions: 7000-2 sTAC Large, high-contrast illuminated, easily readable OLED display, dimmable and 180° rotatable Indication of the measuring values in 13 mm font size, including a rating of the screw-joint (OK / not OK) Display deviation in right and left torque: from ±1% / ±1 digit Display deviation in right and left rotation angle: ±1% / ±1° Rotation angle range adding: 0 to 999° Torque tolerance for OK display (green): adjustable ±1 to 10% Rotation angle tolerance for OK display (green): adjustable 1 to 90° Choice of torque measuring units: Nm, lbf ft, lbf in or kgf m Lets you select or program the effective length for other insert tools from 0 to 250 m (requirement for correct torque / rotation angle measurements) Four signals alert the user during screwing process: audible signal (buzzer), vibration signal, synchronous numerical display, and a 360° LED display with "traffic light function" that is visible from all around Threshold value, pre-warning level: adjustable 50 to 99% Adjustable signaling, On/Off audible signal (buzzer) and vibration Reset function, restore to factory setting Stand-by time: adjustable 1 to 10 min. Indication of battery condition and memory Memory capacity, including date and time: up to 3000 measurements Offers possibility to program flow charts and sets of parameters: 25 and 25 2 control functions: programmable torque control for angle tightening and angle control for torque tightening Menu locking against unintentional change, four-digit code is personally selected Display of the software version with serial numbers, calibration date and service display / usage counter Menu languages: German, English, French, Italian, Chinese Optional on request: Programming and evaluation software for laptop and PC SmartTAC app for Android end devices In preparation: SmartTAC app for IOS (Apple) end devices, data exchange via WLAN RFID chip for code identification The HAZET SmartTAC torque wrenches with built-in angle gauge with Bluetooth interface have valid radio approval in all EU countries, in Switzerland and in Norway and may be sold there. Radio licences for China, India, Mexico, South Africa, South Korea and Turkey are currently in preparation. Other countries on request. For all other countries without radio licences, it is possible to purchase SmartTAC torque wrenches without a Bluetooth interface. These can be connected to a laptop and PC via a USB port and to the optional programming and evaluation software. It is not possible to use the SmartTAC app for mobile devices due to the lack of a Bluetooth interface. Release accuracy tolerance according to ISO 6789-2:2017 Made in Germany Total length: 260 mm Output: Insert square 9 x 12 mm, Square, solid 6.3 mm (1/4 inch) Net weight: 0.48 kg    Technical data: Actuating force min.-max. kg : 0.5 - 4.6 Battery name : 3.7 V Lithium ion rechargeable battery, type 14650, replaceable Effective torque wrench length min. I1 mm : 203 mm lbf min-max : 0.75 - 7.5 Length : 260 mm Net weight : 0.48 kg Nm min-max : 1 - 10 Number of batteries : 1 Number of teeth : 20 Zähne Opening angle : 18 ° Output : Insert square 9 x 12 mm, square 6,3 = 1/4″ Standard : Release accuracy tolerance according to ISO 6789-2:2017 Tightening torque max. : 10 Nm Tolerance : 2 % Torque max lbf.ft : 7.5 lbf.ft Torque min lbf.ft : 0.75 lbf.ft Torque min Nm : 1 Nm Total length : 260 mm

Hazet 7281-2STAC Torque wrench with built-in angle gauge, electronic 2,5-25 Nm 9x12 mm For high-precision screw connections with torque/rotation angle calling for high accuracy or mandatory documentation, e.g. engine components especially cylinder head bolts, machine construction with increased requirements (including robot technology etc.)   Features: Smart technology - Ready for Industry 4.0 Delivery includes insert reversible ratchet 6401-1, 6.3 = 1/4" Length with / without insert tool: 290.5 mm / 260 mm HAZET Smart Technology consisting of the optional smartTAC app and Bluetooth Low Energy interface (may be subject to national approval restrictions) with flawless live data exchange to display the screwing process on mobile end devices such as smartphones (Smartwatch) and tablet PCs as well as via a USB-C interface for programming the torque wrench with built-in angle gauge and documentation of the screwing data via laptop and PC All sTAC torque wrenches can also be used autonomously, without SmartTAC app Unique ergonomic, user-oriented HAZET design of entire tool for professional use The reduction in size and integration of the PCB into the main pipe, results in dimensions that allow for the small torque wrench with built-in angle gauge from 1 Nm Protection class IP 40 Spray-water-proof display and membrane keyboard Tested in accordance with DIN EN ISO 6789-2:2017 USB-C interface for programming torque wrenches with built-in angle gauge and for documentation of the screwing data via laptop and PC Including standard replaceable Li ion rechargeable battery, type 14650 / 3,7 Volt, can be charged directly on the tool via USB-C connector Including 1 metre USB 3.1 / A-C cable Functions: 7000-2 sTAC: Large, high-contrast illuminated, easily readable OLED display, dimmable and 180° rotatable Indication of the measuring values in 13 mm font size, including a rating of the screw-joint (OK / not OK) Display deviation in right and left torque: from ±1% / ±1 digit Display deviation in right and left rotation angle: ±1% / ±1° Rotation angle range adding: 0 to 999° Torque tolerance for OK display (green): adjustable ±1 to 10% Rotation angle tolerance for OK display (green): adjustable 1 to 90° Choice of torque measuring units: Nm, lbf ft, lbf in or kgf m Lets you select or program the effective length for other insert tools from 0 to 250 m (requirement for correct torque / rotation angle measurements) Four signals alert the user during screwing process: audible signal (buzzer), vibration signal, synchronous numerical display, and a 360° LED display with "traffic light function" that is visible from all around Threshold value, pre-warning level: adjustable 50 to 99% Adjustable signaling, On/Off audible signal (buzzer) and vibration Reset function, restore to factory setting Stand-by time: adjustable 1 to 10 min. Indication of battery condition and memory Memory capacity, including date and time: up to 3000 measurements Offers possibility to program flow charts and sets of parameters: 25 and 25 2 control functions: programmable torque control for angle tightening and angle control for torque tightening Menu locking against unintentional change, four-digit code is personally selected Display of the software version with serial numbers, calibration date and service display / usage counter Menu languages: German, English, French, Italian, Chinese Optional on request: Programming and evaluation software for laptop and PC SmartTAC app for Android end devices In preparation: SmartTAC app for IOS (Apple) end devices, data exchange via WLAN RFID chip for code identification The HAZET SmartTAC torque wrenches with built-in angle gauge with Bluetooth interface have valid radio approval in all EU countries, in Switzerland and in Norway and may be sold there. Radio licences for China, India, Mexico, South Africa, South Korea and Turkey are currently in preparation. Other countries on request. For all other countries without radio licences, it is possible to purchase SmartTAC torque wrenches without a Bluetooth interface. These can be connected to a laptop and PC via a USB port and to the optional programming and evaluation software. It is not possible to use the SmartTAC app for mobile devices due to the lack of a Bluetooth interface. Release accuracy tolerance according to ISO 6789-2:2017 Made in Germany Total length: 260 mm Output: Insert square 9 x 12 mm, Square, solid 6.3 mm (1/4 inch) Net weight: 0.48 kg   Technical data: Actuating force min.-max. kg : 1.1 - 11.4 Battery name : 3.7 V Lithium ion rechargeable battery, type 14650, replaceable Effective torque wrench length min. I1 mm : 203 mm lbf min-max : 1.85 - 18.5 Length : 260 mm Net weight : 0.48 kg Nm min-max : 2.5 - 25 Number of batteries : 1 Number of teeth : 20 Zähne Opening angle : 18 ° Output : Insert square 9 x 12 mm, 6,3 = 1/4" Standard : Release accuracy tolerance according to ISO 6789-2:2017 Tightening torque max. : 25 Nm Tolerance : 2 % Torque max lbf.ft : 18.5 lbf.ft Torque min lbf.ft : 1.85 lbf.ft Torque min Nm : 2.5 Nm Total length : 260

Hazet 7290-2STAC Torque wrench with built-in angle gauge, electronic 5-60 Nm, 3/8" 9x12 mm For high-precision screw connections with torque/rotation angle calling for high accuracy or mandatory documentation, e.g. engine components especially cylinder head bolts, machine construction with increased requirements (including robot technology etc.)   Features: Smart technology - Ready for Industry 4.0 Delivery includes insert reversible ratchet 6402-1, 10 mm = 3/8" Length with / without insert tool: 347 mm / 302 mm HAZET Smart Technology consisting of the optional smartTAC app and Bluetooth Low Energy interface (may be subject to national approval restrictions) with flawless live data exchange to display the screwing process on mobile end devices such as smartphones (Smartwatch) and tablet PCs as well as via a USB-C interface for programming the torque wrench with built-in angle gauge and documentation of the screwing data via laptop and PC All sTAC torque wrenches can also be used autonomously, without SmartTAC app Unique ergonomic, user-oriented HAZET design of entire tool for professional use The reduction in size and integration of the PCB into the main pipe, results in dimensions that allow for the small torque wrench with built-in angle gauge from 1 Nm Protection class IP 40 Spray-water-proof display and membrane keyboard Tested in accordance with DIN EN ISO 6789-2:2017 USB-C interface for programming torque wrenches with built-in angle gauge and for documentation of the screwing data via laptop and PC Including standard replaceable Li ion rechargeable battery, type 14650 / 3,7 Volt, can be charged directly on the tool via USB-C connector Including 1 metre USB 3.1 / A-C cable Functions 7000-2 sTAC: Large, high-contrast illuminated, easily readable OLED display, dimmable and 180° rotatable Indication of the measuring values in 13 mm font size, including a rating of the screw-joint (OK / not OK) Display deviation in right and left torque: from ±1% / ±1 digit Display deviation in right and left rotation angle: ±1% / ±1° Rotation angle range adding: 0 to 999° Torque tolerance for OK display (green): adjustable ±1 to 10% Rotation angle tolerance for OK display (green): adjustable 1 to 90° Choice of torque measuring units: Nm, lbf ft, lbf in or kgf m Lets you select or program the effective length for other insert tools from 0 to 250 m (requirement for correct torque / rotation angle measurements) Four signals alert the user during screwing process: audible signal (buzzer), vibration signal, synchronous numerical display, and a 360° LED display with "traffic light function" that is visible from all around Threshold value, pre-warning level: adjustable 50 to 99% Adjustable signaling, On/Off audible signal (buzzer) and vibration Reset function, restore to factory setting Stand-by time: adjustable 1 to 10 min. Indication of battery condition and memory Memory capacity, including date and time: up to 3000 measurements Offers possibility to program flow charts and sets of parameters: 25 and 25 2 control functions: programmable torque control for angle tightening and angle control for torque tightening Menu locking against unintentional change, four-digit code is personally selected Display of the software version with serial numbers, calibration date and service display / usage counter Menu languages: German, English, French, Italian, Chinese Optional on request: Programming and evaluation software for laptop and PC SmartTAC app for Android end devices In preparation: SmartTAC app for IOS (Apple) end devices, data exchange via WLAN RFID chip for code identification The HAZET SmartTAC torque wrenches with built-in angle gauge with Bluetooth interface have valid radio approval in all EU countries, in Switzerland and in Norway and may be sold there. Radio licences for China, India, Mexico, South Africa, South Korea and Turkey are currently in preparation. Other countries on request. For all other countries without radio licences, it is possible to purchase SmartTAC torque wrenches without a Bluetooth interface. These can be connected to a laptop and PC via a USB port and to the optional programming and evaluation software. It is not possible to use the SmartTAC app for mobile devices due to the lack of a Bluetooth interface. Release accuracy tolerance according to ISO 6789-2:2017 Made in Germany Total length: 302 mm Output: Insert square 9 x 12 mm, Square, solid 10 mm (3/8 inch) Net weight: 0.64 kg   Technical data: Actuating force min.-max. kg : 1.8 - 22.2 Battery name : 3.7 V Lithium ion rechargeable battery, type 14650, replaceable Effective torque wrench length min. I1 mm : 248 mm lbf min-max : 3.5 - 44 Length : 302 mm Net weight : 0.64 kg Nm min-max : 5 - 60 Number of batteries : 1 Number of teeth : 30 Zähne Opening angle : 12 ° Output : Insert square 9 x 12 mm, Square, solid 10 mm (3/8 inch) Standard : Release accuracy tolerance according to ISO 6789-2:2017 Tightening torque max. : 60 Nm Tolerance : 1 % Torque max lbf.ft : 44 lbf.ft Torque min lbf.ft : 3.5 lbf.ft Torque min Nm : 5 Nm Total length : 302 mm

Hazet 7291-2STAC Torque wrench with built-in angle gauge, electronic SmartTac 10-100 Nm 3/8" 9x12mm For high-precision screw connections with torque/rotation angle calling for high accuracy or mandatory documentation, e.g. engine components especially cylinder head bolts, machine construction with increased requirements (including robot technology etc.)   Features: Smart technology - Ready for Industry 4.0 Delivery includes insert reversible ratchet 6402-1, 10 = 3/8" Length with / without insert tool: 428 mm / 383 mm HAZET Smart Technology consisting of the optional smartTAC app and Bluetooth Low Energy interface (may be subject to national approval restrictions) with flawless live data exchange to display the screwing process on mobile end devices such as smartphones (Smartwatch) and tablet PCs as well as via a USB-C interface for programming the torque wrench with built-in angle gauge and documentation of the screwing data via laptop and PC All sTAC torque wrenches can also be used autonomously, without SmartTAC app Unique ergonomic, user-oriented HAZET design of entire tool for professional use The reduction in size and integration of the PCB into the main pipe, results in dimensions that allow for the small torque wrench with built-in angle gauge from 1 Nm Protection class IP 40 Spray-water-proof display and membrane keyboard Tested in accordance with DIN EN ISO 6789-2:2017 USB-C interface for programming torque wrenches with built-in angle gauge and for documentation of the screwing data via laptop and PC Including standard replaceable Li ion rechargeable battery, type 14650 / 3,7 Volt, can be charged directly on the tool via USB-C connector Including 1 metre USB 3.1 / A-C cable   Functions 7000-2 sTAC: Large, high-contrast illuminated, easily readable OLED display, dimmable and 180° rotatable Indication of the measuring values in 13 mm font size, including a rating of the screw-joint (OK / not OK) Display deviation in right and left torque: from ±1% / ±1 digit Display deviation in right and left rotation angle: ±1% / ±1° Rotation angle range adding: 0 to 999° Torque tolerance for OK display (green): adjustable ±1 to 10% Rotation angle tolerance for OK display (green): adjustable 1 to 90° Choice of torque measuring units: Nm, lbf ft, lbf in or kgf m Lets you select or program the effective length for other insert tools from 0 to 250 m (requirement for correct torque / rotation angle measurements) Four signals alert the user during screwing process: audible signal (buzzer), vibration signal, synchronous numerical display, and a 360° LED display with "traffic light function" that is visible from all around Threshold value, pre-warning level: adjustable 50 to 99% Adjustable signaling, On/Off audible signal (buzzer) and vibration Reset function, restore to factory setting Stand-by time: adjustable 1 to 10 min. Indication of battery condition and memory Memory capacity, including date and time: up to 3000 measurements Offers possibility to program flow charts and sets of parameters: 25 and 25 2 control functions: programmable torque control for angle tightening and angle control for torque tightening Menu locking against unintentional change, four-digit code is personally selected Display of the software version with serial numbers, calibration date and service display / usage counter Menu languages: German, English, French, Italian, Chinese Optional on request: Programming and evaluation software for laptop and PC SmartTAC app for Android end devices In preparation: SmartTAC app for IOS (Apple) end devices, data exchange via WLAN RFID chip for code identification The HAZET SmartTAC torque wrenches with built-in angle gauge with Bluetooth interface have valid radio approval in all EU countries, in Switzerland and in Norway and may be sold there. Radio licences for China, India, Mexico, South Africa, South Korea and Turkey are currently in preparation. Other countries on request. For all other countries without radio licences, it is possible to purchase SmartTAC torque wrenches without a Bluetooth interface. These can be connected to a laptop and PC via a USB port and to the optional programming and evaluation software. It is not possible to use the SmartTAC app for mobile devices due to the lack of a Bluetooth interface. Release accuracy tolerance according to ISO 6789-2:2017 Made in Germany Total length: 383 mm Output: Insert square 9 x 12 mm, Square, solid 10 mm (3/8 inch) Net weight: 0.72 kg   Technical data: Actuating force min.-max. kg : 2.9 - 28.7 Battery name : 3.7 V Lithium ion rechargeable battery, type 14650, replaceable Effective torque wrench length min. I1 mm : 327 mm lbf min-max : 7.5 - 75 Length : 383 mm Net weight : 0.72 kg Nm min-max : 10 - 100 Number of batteries : 1 Number of teeth : 30 Zähne Opening angle : 12 ° Output : Insert square 9 x 12 mm, Square, solid 10 mm (3/8 inch) Standard : Release accuracy tolerance according to ISO 6789-2:2017 Tightening torque max. : 100 Nm Tolerance : 1 % Torque max lbf.ft : 75 lbf.ft Torque min lbf.ft : 7.5 lbf.ft Torque min Nm : 10 Nm Total length : 383 mm

Stahlwille 713R/6 Electronic angle torque wrench SENSOTORK Model 713R Measuring r. 3-60N·m Drive 3/8 L. 378mm Features:Simple and flexible operation thanks to menu navigation on large displayExceptionally wide measuring range (5 % to 100 % of the nominal value)Supplied incl. reversible ratchetAdditional insert toolsQuickRelease safety lockFor right-hand and left-hand tighteningMeasurement independent of the point of application of forceUnits of measurement: N-m, ft-lb, in-lbAdvance warning time of the visual, warning time of the visual, tactile and audible signals adjustableBacklighting of the display also for evaluating the tightening process (traffic light principle)Individual insertion tool lengths adjustableEasy to maintain thanks to simple adjustment and automatic indication of the next calibration date calibration daterecurring screwdriving operations can be summarised in a menu-guided sequence planscrewing operations are saved with a time stampindividual identification designation possibleprotected against unintentional adjustment and unauthorised access by passwordcomplies with DKD- R 3-7, Class 2with 2 certificates (torque according to DIN EN ISO 6789-2: 2017/angle of rotation)In a sturdy plastic case (Gr. 40 in a sturdy sheet steel box)Supplied with 2 AA 1.5 V batteries. AA/LR6, 1.2 V NiMH batteries can also be usedFully automatic calibration (torque) with the perfectControl calibration device no. 7794-2. Readjustment without disassemblyDBGM (German Federal Utility Model)Torque and angle of rotation are visible simultaneouslyConvenient angle of rotation measurement in an extremely wide angle of rotation rangeDisplay deviation angle of rotation ±1° ±1 digit up to 100°, >100° at least 1% ± 1 digit Technical features:Measuring range N·m: 3-60 N·mMeasuring range ft·lb: 2,5-44 ft·lbExternal square drive (inch): 3/8 Battery type: Mignon (AA) 1,5V Width mm (b): 33 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 1500 gSize: 6 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 24 mmLength mm (L): 378 mmLF: 299 mmSF: 17,5 mmWeight: 856 gWeigth kg: 1.460 kgStahlwille 713R/6Stahlwille product no: 96501606EAN: 4018754156504 

Stahlwille 714/ 1 Torque and angle wrench MANOSKOP Model 714 Measuring r. 1-10N·m Drive L. 226mm Features:4 measuring modes (torque, angle of rotation, torque with monitoring variable "angle of rotation", angle of rotation with monitoring variable "torque")high-resolution colour OLED display and lateral signal lightsoptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2. 500 screwdriving operations incl. date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge block correction: Option to enter a deviating gauge value to ensure the desired target valueimmediately ready for use again after reliefright and left-hand tightening - for left-hand tightening in "click-type" function mode, the insert tool must be rotatedoptical, acoustic and tactile release signaltorque and angle of rotation displays visible simultaneouslymeasurement independent of the force application point (for gr. 1, 2 and 4)safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-m; >400 N-m: 1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 1-10 N·mMeasuring range ft·lb: 0,7-7,5 ft·lbMeasuring range in·lb: 9-90 in·lbBattery type: Micro (AAA) 1,5V Width mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 795 gSize: 1 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 226 mmLF: 188 mmSF: 17,5 mmWeight: 370 gWeigth kg: 1.02 kgStahlwille 714/ 1Stahlwille product no: 96500901EAN: 4018754222780 

Stahlwille 714/ 2 Torque and angle wrench MANOSKOP Model 714 Measuring r. 2-20N·m Drive L. 226mm Features:4 measuring modes (torque, angle of rotation, torque with monitoring variable "angle of rotation", angle of rotation with monitoring variable "torque")high-resolution colour OLED display and lateral signal lightsoptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2. 500 screwdriving operations incl. date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge block correction: Option to enter a deviating gauge value to ensure the desired target valueimmediately ready for use again after reliefright and left-hand tightening - for left-hand tightening in "click-type" function mode, the insert tool must be rotatedoptical, acoustic and tactile release signaltorque and angle of rotation displays visible simultaneouslymeasurement independent of the force application point (for gr. 1, 2 and 4)safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-m; >400 N-m: 1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 2-20 N·mMeasuring range ft·lb: 1,5-15 ft·lbMeasuring range in·lb: 18-180 in·lbBattery type: Micro (AAA) 1,5V Width mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 805 gSize: 2 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 226 mmLF: 188 mmSF: 17,5 mmWeight: 380 gWeigth kg: 1.03 kgStahlwille 714/ 2Stahlwille product no: 96500902EAN: 4018754222797 

Stahlwille 714/ 4 Torque and angle wrench MANOSKOP Model 714 Measuring r. 4-40N·m Drive L. 252mm Features:4 measuring modes (torque, angle of rotation, torque with monitoring variable "angle of rotation", angle of rotation with monitoring variable "torque")high-resolution colour OLED display and lateral signal lightsoptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2. 500 screwdriving operations incl. date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge block correction: Option to enter a deviating gauge value to ensure the desired target valueimmediately ready for use again after reliefright and left-hand tightening - for left-hand tightening in "click-type" function mode, the insert tool must be rotatedoptical, acoustic and tactile release signaltorque and angle of rotation displays visible simultaneouslymeasurement independent of the force application point (for gr. 1, 2 and 4)safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-m; >400 N-m: 1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 4-40 N·mMeasuring range ft·lb: 3-30 ft·lbMeasuring range in·lb: 36-360 in·lbBattery type: Micro (AAA) 1,5V Width mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 845 gSize: 4 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 252 mmLF: 214 mmSF: 17,5 mmWeight: 420 gWeigth kg: 1.07 kgStahlwille 714/ 4Stahlwille product no: 96500904EAN: 4018754222803 

Stahlwille 714/ 6 Torque and angle wrench MANOSKOP Model 714 Measuring r. 6-60N·m Drive L. 393mm Features:4 measuring modes (torque, angle of rotation, torque with monitoring variable "angle of rotation", angle of rotation with monitoring variable "torque")high-resolution colour OLED display and lateral signal lightsoptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2. 500 screwdriving operations incl. date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge block correction: Option to enter a deviating gauge value to ensure the desired target valueimmediately ready for use again after reliefright and left-hand tightening - for left-hand tightening in "click-type" function mode, the insert tool must be rotatedoptical, acoustic and tactile release signaltorque and angle of rotation displays visible simultaneouslymeasurement independent of the force application point (for gr. 1, 2 and 4)safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-m; >400 N-m: 1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 6-60 N·mMeasuring range ft·lb: 4,5-45 ft·lbMeasuring range in·lb: 54-540 in·lbBattery type: Micro (AAA) 1,5V Width mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 1235 gSize: 6 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 393 mmLF: 355 mmSF: 17,5 mmWeight: 810 gWeigth kg: 1.53 kgStahlwille 714/ 6Stahlwille product no: 96500906EAN: 4018754222810 

Stahlwille 714/10 Torque and angle wrench MANOSKOP Model 714 Measuring r. 10-100N·m Drive L. 466mm Features:4 measuring modes (torque, angle of rotation, torque with monitoring variable "angle of rotation", angle of rotation with monitoring variable "torque")high-resolution colour OLED display and lateral signal lightsoptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2. 500 screwdriving operations incl. date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge block correction: Option to enter a deviating gauge value to ensure the desired target valueimmediately ready for use again after reliefright and left-hand tightening - for left-hand tightening in "click-type" function mode, the insert tool must be rotatedoptical, acoustic and tactile release signaltorque and angle of rotation displays visible simultaneouslymeasurement independent of the force application point (for gr. 1, 2 and 4)safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-m; >400 N-m: 1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 10-100 N·mMeasuring range ft·lb: 7,4-75 ft·lbMeasuring range in·lb: 90-900 in·lbBattery type: Micro (AAA) 1,5V Width mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 1655 gSize: 10 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 466 mmLF: 428 mmSF: 17,5 mmWeight: 1085 gWeigth kg: 1.66 kgStahlwille 714/10Stahlwille product no: 96500910EAN: 4018754222827 

Stahlwille 714R/ 1 Angle and torque wrench MANOSKOP Model 714R Measuring r. 1-10N·m Drive 1/4 L. 269mm Features:with reversible ratchet (sizes 1-4), fine-tooth reversible ratchet (sizes 6-65) or insert ratchet with square drive-through (sizes 80-100) 80-100)4 measuring modes (torque, angle of rotation, torque with monitoring parameter "angle of rotation", angle of rotation with monitoring parameter "torque")High-resolution colour OLED display and lateral signal lightsOptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2,500 screwdriving operations incl. date and time stamp date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge correction: option to enter a deviating gauge to ensure the desired target valueimmediately ready for use again after relieffor controlled right-hand and left-hand tightening (size 1-65); for left-hand tightening in "click-type" function mode, the insert tool must be rotated (size 80-100)Optical, acoustic and tactile release signalTorque and rotation angle displays visible simultaneouslyMeasurement independent of the force application point (for sizes 1, 2 and 4)Safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 1-10 N·mMeasuring range ft·lb: 0,7-7,5 ft·lbMeasuring range in·lb: 9-90 in·lbExternal square drive (inch): 1/4 Battery type: Micro (AAA) 1,5V Width mm (b): 80 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 857 gSize: 1 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 70 mmLength mm (L): 269 mmWeight: 432 gWeigth kg: 0.950 kgStahlwille 714R/ 1Stahlwille product no: 96501001EAN: 4018754212712 

Stahlwille 714R/ 2 Angle and torque wrench MANOSKOP Model 714R Measuring r. 2-20N·m Drive 1/4 L. 269mm Features:with reversible ratchet (sizes 1-4), fine-tooth reversible ratchet (sizes 6-65) or insert ratchet with square drive-through (sizes 80-100) 80-100)4 measuring modes (torque, angle of rotation, torque with monitoring parameter "angle of rotation", angle of rotation with monitoring parameter "torque")High-resolution colour OLED display and lateral signal lightsOptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2,500 screwdriving operations incl. date and time stamp date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge correction: option to enter a deviating gauge to ensure the desired target valueimmediately ready for use again after relieffor controlled right-hand and left-hand tightening (size 1-65); for left-hand tightening in "click-type" function mode, the insert tool must be rotated (size 80-100)Optical, acoustic and tactile release signalTorque and rotation angle displays visible simultaneouslyMeasurement independent of the force application point (for sizes 1, 2 and 4)Safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 2-20 N·mMeasuring range ft·lb: 1,5-15 ft·lbMeasuring range in·lb: 18-180 in·lbExternal square drive (inch): 1/4 Battery type: Micro (AAA) 1,5V Width mm (b): 80 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 867 gSize: 2 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 70 mmLength mm (L): 269 mmWeight: 442 gWeigth kg: 1.030 kgStahlwille 714R/ 2Stahlwille product no: 96501002EAN: 4018754212729 

Stahlwille 714R/ 4 Angle and torque wrench MANOSKOP Model 714R Measuring r. 4-40N·m Drive 1/4 L. 295mm Features:with reversible ratchet (sizes 1-4), fine-tooth reversible ratchet (sizes 6-65) or insert ratchet with square drive-through (sizes 80-100) 80-100)4 measuring modes (torque, angle of rotation, torque with monitoring parameter "angle of rotation", angle of rotation with monitoring parameter "torque")High-resolution colour OLED display and lateral signal lightsOptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2,500 screwdriving operations incl. date and time stamp date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge correction: option to enter a deviating gauge to ensure the desired target valueimmediately ready for use again after relieffor controlled right-hand and left-hand tightening (size 1-65); for left-hand tightening in "click-type" function mode, the insert tool must be rotated (size 80-100)Optical, acoustic and tactile release signalTorque and rotation angle displays visible simultaneouslyMeasurement independent of the force application point (for sizes 1, 2 and 4)Safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 4-40 N·mMeasuring range ft·lb: 3-30 ft·lbMeasuring range in·lb: 36-360 in·lbExternal square drive (inch): 1/4 Battery type: Micro (AAA) 1,5V Width mm (b): 80 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 907 gSize: 4 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 70 mmLength mm (L): 295 mmWeight: 482 gWeigth kg: 0.990 kgStahlwille 714R/ 4Stahlwille product no: 96501004EAN: 4018754212736 

Stahlwille 714R/ 6 Angle and torque wrench MANOSKOP Model 714R Measuring r. 6-60N·m Drive 3/8 L. 427mm Features:with reversible ratchet (sizes 1-4), fine-tooth reversible ratchet (sizes 6-65) or insert ratchet with square drive-through (sizes 80-100) 80-100)4 measuring modes (torque, angle of rotation, torque with monitoring parameter "angle of rotation", angle of rotation with monitoring parameter "torque")High-resolution colour OLED display and lateral signal lightsOptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2,500 screwdriving operations incl. date and time stamp date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge correction: option to enter a deviating gauge to ensure the desired target valueimmediately ready for use again after relieffor controlled right-hand and left-hand tightening (size 1-65); for left-hand tightening in "click-type" function mode, the insert tool must be rotated (size 80-100)Optical, acoustic and tactile release signalTorque and rotation angle displays visible simultaneouslyMeasurement independent of the force application point (for sizes 1, 2 and 4)Safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 6-60 N·mMeasuring range ft·lb: 4,5-45 ft·lbMeasuring range in·lb: 54-540 in·lbExternal square drive (inch): 3/8 Battery type: Micro (AAA) 1,5V Width mm (b): 80 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 1390 gSize: 6 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 70 mmLength mm (L): 427 mmWeight: 965 gWeigth kg: 1.55 kgStahlwille 714R/ 6Stahlwille product no: 96501006EAN: 4018754212743 

Stahlwille 714R/10 Angle and torque wrench MANOSKOP Model 714R Measuring r. 10-100N·m Drive 1/2 L. 500mm Features:with reversible ratchet (sizes 1-4), fine-tooth reversible ratchet (sizes 6-65) or insert ratchet with square drive-through (sizes 80-100) 80-100)4 measuring modes (torque, angle of rotation, torque with monitoring parameter "angle of rotation", angle of rotation with monitoring parameter "torque")High-resolution colour OLED display and lateral signal lightsOptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2,500 screwdriving operations incl. date and time stamp date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge correction: option to enter a deviating gauge to ensure the desired target valueimmediately ready for use again after relieffor controlled right-hand and left-hand tightening (size 1-65); for left-hand tightening in "click-type" function mode, the insert tool must be rotated (size 80-100)Optical, acoustic and tactile release signalTorque and rotation angle displays visible simultaneouslyMeasurement independent of the force application point (for sizes 1, 2 and 4)Safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 10-100 N·mMeasuring range ft·lb: 7,4-75 ft·lbMeasuring range in·lb: 90-900 in·lbExternal square drive (inch): 1/2 Battery type: Micro (AAA) 1,5V Width mm (b): 80 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 1657 gSize: 10 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 70 mmLength mm (L): 500 mmWeight: 1232 gWeigth kg: 1.8 kgStahlwille 714R/10Stahlwille product no: 96501010EAN: 4018754212750 

Stahlwille 730D/10 Torque wrench service/series MANOSKOP Model 730D Measuring r. 10-100N·m Drive L. 467mm Features:Tactile and audible release signalMount for interchangeable insert/shell toolsQuickRelease safety lockquick setting via practical keypadautomatically correct tightening torque after entering a deviating gaugeoverload protection thanks to acoustic and visual warning signalno unintentional adjustment thanks to automatic key lockdisplay function even with counter-clockwise torquesunits of measurement: N-m, ft-lb, in-lbDifferent tolerance limits can be set depending on the tightening operationOptical evaluation of the tightening operation by green and red indication on the displayAdditional protection of the default settings (function mode, click-type or setpoint value, unit of measurement, tolerance value, saving, deviating gauge) by PIN codeSaving of up to 7. 500 screwdriving dataUSB interfaceautomatic notification of the next calibration dateCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 77062-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Certified in accordance with DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a sheet steel case)PatentedSupplied with 2 mignon batteries 1.5 V. Mignon NiMH batteries AA/LR6, 1.2 V, can be used.Display deviation ± 2 %, ± 1 digit Technical features:Measuring range N·m: 10-100 N·mMeasuring range ft·lb: 7,4-75 ft·lbMeasuring range in·lb: 90-900 in·lbSetting display resolution N·m: 0,2/0,1 N·mSetting display resolution ft·lb: 0,2/0,1 ft·lbSetting display resolution in·lb: 2/1,0 in·lbBattery type: Mignon (AA) 1,5V Width mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 1510 gSize: 10 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 467 mmLF: 426,5 mmMA N·m: 10 N·mNominal value N·m: 100 N·mSF: 17,5 mmStahlwille 730D/10Stahlwille product no: 96501710EAN: 4018754180318 

Stahlwille 730DR/10 Service/Series MANOSKOP torque wrenches w.reversible ratchet insert tool Model 730DR Measuring r. 10-100N·m Drive 1/2 L. 501mm Features:Sensitive and audible trigger signalMount for interchangeable insert/shell toolsQuickRelease safety lockquick setting via practical keypadautomatically correct tightening torque after entering a deviating gaugeoverload protection thanks to audible and visual warning signalno unintentional adjustment thanks to automatic key lockdisplay function even with counter-clockwise torquesunits of measurement: N-m, ft-lb, in-lbDifferent tolerance limits can be set depending on the tightening operationOptical evaluation of the tightening operation by green and red indication on the displayAdditional protection of the default settings (function mode, click-type or setpoint value, unit of measurement, tolerance value, saving, deviating gauge) by PIN codeSaving of up to 7. 500 screwdriving dataUSB interfaceautomatic notification of the next calibration dateCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 77062-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Certified in accordance with DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a sheet steel case)PatentedSupplied with 2 mignon batteries 1.5 V. Mignon NiMH batteries AA/LR6, 1.2 V, can be used.Display deviation ± 2 %, ± 1 digit Technical features:Measuring range N·m: 10-100 N·mMeasuring range ft·lb: 7,4-75 ft·lbMeasuring range in·lb: 90-900 in·lbExternal square drive (inch): 1/2 Setting display resolution N·m: 0,2/0,1 N·mSetting display resolution ft·lb: 0,2/0,1 ft·lbSetting display resolution in·lb: 2/1,0 in·lbBattery type: Mignon (AA) 1,5V Width mm (b): 95 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 1657 gSize: 10 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 74 mmLength mm (L): 501 mmMA N·m: 10 N·mNominal value N·m: 100 N·mWeight: 1232 gStahlwille 730DR/10Stahlwille product no: 96501810EAN: 4018754175642