Gedore 7480-01 Torque wrench DREMOMETER A-SE A+S 8-40 Nm Gedore 7480-01 Torque wrench DREMOMETER A-SE A+S 8-40 Nm Features:Technical advantage/Function: Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustmentthereby representing more process reliability of the userClassified as per DIN EN ISO 6789-2:2017 Type II Class A - adjusted to a maximum permissible +/-3 % deviation and thus with a greater precision than the standard-stipulated +/-4 %Lightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyDrive offers extensive range of accessoriesDepending on the applicationaccess is possible from the front (e.g. open-end fitting) or side (e.g. reversible ratchet and socket).Force to be applied in the middle of the handgrip only - do not use an extension tube as otherwiseinaccuracies can evolveOperation only with end fittings otherwise inaccuracies can arise. Keep the depth gauges on the certificate in mind. Only use original GEDORE accessories.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningEasy adjustment thanks to attractive adjusting button secured against loss at the end of the handleWith certificate acc. to DIN EN ISO 6789-2:2017traceable via in-house DAkkS laboratory to national standardsPre-set DREMOMETER for serial production wherever the same value always needs to be appliedIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request) Technical features:Graduation: 5Torque range (min./max.) [lbf·ft]: -Precision +/-: +/- 3 %Net weight [kg]: 0,95 kgDepth gauge [metric]: 17,5 mmTotal height [mm]: 30 mmGedore Code-Number: 1427059EAN: 4002805927281
Gedore 7481-01 Torque wrench DREMOMETER B-SE A+S 25-120 Nm Gedore 7481-01 Torque wrench DREMOMETER B-SE A+S 25-120 Nm Features:Technical advantage/Function: Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustmentthereby representing more process reliability of the userClassified as per DIN EN ISO 6789-2:2017 Type II Class A - adjusted to a maximum permissible +/-3 % deviation and thus with a greater precision than the standard-stipulated +/-4 %Lightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyDrive offers extensive range of accessoriesDepending on the applicationaccess is possible from the front (e.g. open-end fitting) or side (e.g. reversible ratchet and socket).Force to be applied in the middle of the handgrip only - do not use an extension tube as otherwiseinaccuracies can evolveOperation only with end fittings otherwise inaccuracies can arise. Keep the depth gauges on the certificate in mind. Only use original GEDORE accessories.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningEasy adjustment thanks to attractive adjusting button secured against loss at the end of the handleWith certificate acc. to DIN EN ISO 6789-2:2017traceable via in-house DAkkS laboratory to national standardsPre-set DREMOMETER for serial production wherever the same value always needs to be appliedIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request) Technical features:Graduation: 5Precision +/-: +/- 3 %Net weight [kg]: 1,25 kgTorque (max.) [Nm]: 120 NmInsertion depth 1: 16,0 mmDepth gauge [metric]: 17,5 mmGedore Code-Number: 1427091EAN: 4002805927298
Gedore 7482-01 Torque wrench DREMOMETER C-SE A+S 80-400 Nm Gedore 7482-01 Torque wrench DREMOMETER C-SE A+S 80-400 Nm Features:Technical advantage/Function: Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustmentthereby representing more process reliability of the userClassified as per DIN EN ISO 6789-2:2017 Type II Class A - adjusted to a maximum permissible +/-3 % deviation and thus with a greater precision than the standard-stipulated +/-4 %Lightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyDrive offers extensive range of accessoriesDepending on the applicationaccess is possible from the front (e.g. open-end fitting) or side (e.g. reversible ratchet and socket).Force to be applied in the middle of the handgrip only - do not use an extension tube as otherwiseinaccuracies can evolveOperation only with end fittings otherwise inaccuracies can arise. Keep the depth gauges on the certificate in mind. Only use original GEDORE accessories.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningEasy adjustment thanks to attractive adjusting button secured against loss at the end of the handleWith certificate acc. to DIN EN ISO 6789-2:2017traceable via in-house DAkkS laboratory to national standardsPre-set DREMOMETER for serial production wherever the same value always needs to be appliedIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request) Technical features:Graduation: 5Precision +/-: +/- 3 %Net weight [kg]: 1,7 kgDrive connector rectangular: 14 x 18 mmInsertion depth 1: 25,0 mmDepth gauge [metric]: 25,0 mmGedore Code-Number: 1427105EAN: 4002805927304
Gedore 753-11 Torque wrench DREMOMETER MINI 2,5-5 Nm Gedore 753-11 Torque wrench DREMOMETER MINI 2,5-5 Nm Features:Use: Controlled screw tightening in the range of 25 - 12 Nm / 225 - 106 lbf·inFor use in almost all industrial manufacturing areasFeatures: Classified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardTorque wrench with 1/4 square drive with ball lock DIN 3120 - A 6.3 similar to ISO 1174for controlled right-hand tighteningAutomatic short-path actuation with tactile impulse and audible signalLightweight plastic casingmade from high-gradeglass-fibre reinforced polyamidewith soft-grip handleDual scale with a scale graduation of 05 Nm and 5 lbf·inAdditional micrometre scale for setting interim values with Nmgraduations of 0.05 NmWindow with a magnifying-glass effectLocking button enables reliable locking of the torque settingScope of delivery: Torque wrench Typ MINIWith certificate acc. to DIN EN ISO 6789:2017 Type IItraceable via in-house DAkkS laboratory to national standards" Technical features:Precision +/-: +/- 3 %vernier Nm: 0,05 NmNet weight [kg]: 0,55 kgDrive square inch: 1/4Torque (max.) [lbf·ft]: 106 lbf·ftTorque (min.) [lbf·in]: 106 lbf·inGedore Code-Number: 1957694EAN: 4002805929063
Gedore 7554-01 Torque wrench DREMOMETER AM A+S 6-30 Nm Gedore 7554-01 Torque wrench DREMOMETER AM A+S 6-30 Nm Features:Technical advantage/Function: Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustmentthereby representing more process reliability of the userClassified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardLightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningSingle- and double-square drive for controlled bi-directional tighteningUse: Controlled screw tightening in the range of 6 - 3000 NmFor use in almost all industrial manufacturing areasFeatures: With certificate acc. to DIN EN ISO 6789traceable via in-house DAkkS laboratory to national standardsAutomatic short-path actuation with tactile impulse and audible signalDual scale with corresponding scale graduation (see table)Type BBCC with push-button releasePre-set DREMOMETER for serial production wherever the same value always needs to be appliedIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request) Technical features:Graduation: 1Torque range (min./max.) [lbf·ft]: -Precision +/-: +/- 3 %Net weight [kg]: 0,58 kgScale division [Nm]: 1 NmDrive square inch: 1/4Gedore Code-Number: 1210891EAN: 4002805927311
Gedore 7559-01 Torque wrench DREMOMETER AML A+S 6-30 Nm Gedore 7559-01 Torque wrench DREMOMETER AML A+S 6-30 Nm Features:Technical advantage/Function: Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustmentthereby representing more process reliability of the userClassified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardLightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningSingle- and double-square drive for controlled bi-directional tighteningUse: Controlled screw tightening in the range of 6 - 3000 NmFor use in almost all industrial manufacturing areasFeatures: With certificate acc. to DIN EN ISO 6789traceable via in-house DAkkS laboratory to national standardsAutomatic short-path actuation with tactile impulse and audible signalDual scale with corresponding scale graduation (see table)Type BBCC with push-button releasePre-set DREMOMETER for serial production wherever the same value always needs to be appliedIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request) Technical features:Graduation: 1Torque range (min./max.) [lbf·ft]: -Precision +/-: +/- 3 %Net weight [kg]: 0,59 kgScale division [Nm]: 1 NmDrive square inch: 1/4Gedore Code-Number: 1210904EAN: 4002805927328
Gedore 7560-01 Torque wrench DREMOMETER A A+S 8-40 Nm
Gedore 7560-01 Torque wrench DREMOMETER A A+S 8-40 Nm
Features:
More process reliability of the user: Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustment
Calibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standard
Very workshop-friendly: Lightweight yet robust (as the housing is made of an aluminium alloy) and resilient
No inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)
High degree of user safety: Both the square drive and fulcrum are on an axis
Can be extended to reduce the user's working load.
Extremely low wear attributable to reduced forces in a lever mechanism
Forged lever chain from group own quality forge
Maximum precision even when subjected to extreme continuous use
Long life cycles and tool lives
Easy operation: Fast and safe torque tightening
Single- and double-square drive for controlled bi-directional tightening
For use in almost all industrial manufacturing areas
Automatic short-path actuation with tactile impulse and audible signal
Dual scale with corresponding scale graduation (see table)
Pre-set DREMOMETER for serial production (wherever the same value always needs to be applied) möglich: If fixed setting at the factory is desired is required please state the Nm value when ordering (price on request)
To adjust the torque, remove the circlip at the end of the hndle and push the black flaps to the side. The torque can then be set using a square socket.
Technical features:
Graduation: 5
Torque range (min./max.) [lbf·ft]: -
Precision +/-: +/- 3 %
Net weight [kg]: 1 kg
Drive connector square [metric]: 10 mm
Distance housing - square drive: 17,5 mm
Total width [mm]: 25 mm
Total height [mm]: 30 mm
Total length [mm]: 326,5 mm
Nominal width [mm]: 25 mm
Nominal height [mm]: 30 mm
Nominal length [mm]: 326,5 mm
Net weight [kg]: 1 kg
Type B, BC, C with push-button release
Classified according to DIN EN ISO 6789-2:2017 Type II Class A, incl. traceable test certificate (via in-house DAkkS laboratory to national standards)
Gedore Code-Number: 7708920
EAN: 4002805756010
Gedore 7561-01 Torque wrench DREMOMETER B A+S 25-120 Nm Gedore 7561-01 Torque wrench DREMOMETER B A+S 25-120 Nm Features:Technical advantage/Function: Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustmentthereby representing more process reliability of the userClassified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardLightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningSingle- and double-square drive for controlled bi-directional tighteningUse: Controlled screw tightening in the range of 6 - 3000 NmFor use in almost all industrial manufacturing areasFeatures: With certificate acc. to DIN EN ISO 6789traceable via in-house DAkkS laboratory to national standardsAutomatic short-path actuation with tactile impulse and audible signalDual scale with corresponding scale graduation (see table)Type BBCC with push-button releasePre-set DREMOMETER for serial production wherever the same value always needs to be appliedIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request) Technical features:Graduation: 5Precision +/-: +/- 3 %Net weight [kg]: 1,5 kgDrive square inch: 1/2Drive connector square [metric]: 12,5 mmTorque (max.) [Nm]: 120 NmGedore Code-Number: 7709060EAN: 4002805756119
Gedore 7562-10 Torque wrench DREMOMETER C A+S 60-300 Nm Gedore 7562-10 Torque wrench DREMOMETER C A+S 60-300 Nm Features:Technical advantage/Function: Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustmentthereby representing more process reliability of the userClassified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardLightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningSingle- and double-square drive for controlled bi-directional tighteningUse: Controlled screw tightening in the range of 6 - 3000 NmFor use in almost all industrial manufacturing areasFeatures: With certificate acc. to DIN EN ISO 6789traceable via in-house DAkkS laboratory to national standardsAutomatic short-path actuation with tactile impulse and audible signalDual scale with corresponding scale graduation (see table)Type BBCC with push-button releasePre-set DREMOMETER for serial production wherever the same value always needs to be appliedIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request) Technical features:Graduation: 5Precision +/-: +/- 3 %Drive square inch: 1/2Drive connector square [metric]: 12,5 mmDistance housing - square drive: 17,5 mmNet weight [kg]: 2 kgGedore Code-Number: 7709650EAN: 4002805756218
