Gedore 7563-01 Torque wrench DREMOMETER DR A+S 155-760 Nm Gedore 7563-01 Torque wrench DREMOMETER DR A+S 155-760 Nm Features:Technical advantage/Function: Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustmentthereby representing more process reliability of the userClassified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardLightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningSingle- and double-square drive for controlled bi-directional tighteningUse: Controlled screw tightening in the range of 6 - 3000 NmFor use in almost all industrial manufacturing areasFeatures: With certificate acc. to DIN EN ISO 6789traceable via in-house DAkkS laboratory to national standardsAutomatic short-path actuation with tactile impulse and audible signalDual scale with corresponding scale graduation (see table)Type BBCC with push-button releasePre-set DREMOMETER for serial production wherever the same value always needs to be appliedIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request) Technical features:Graduation: 10Precision +/-: +/- 3 %Graduation [lbf·ft]: 10 lbf·ftScale division [Nm]: 10 NmTorque (min.) [lbf·ft]: 115 lbf·ftTorque range (min./max.) [lbf·ft]: 115 lbf·ft - 560 lbf·ftGedore Code-Number: 1210912EAN: 4002805927366
Gedore 7563-10 Torque wrench DREMOMETER D A+S 155-760 Nm Gedore 7563-10 Torque wrench DREMOMETER D A+S 155-760 Nm Features:Technical advantage/Function: Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustmentthereby representing more process reliability of the userClassified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardLightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningSingle- and double-square drive for controlled bi-directional tighteningUse: Controlled screw tightening in the range of 6 - 3000 NmFor use in almost all industrial manufacturing areasFeatures: With certificate acc. to DIN EN ISO 6789traceable via in-house DAkkS laboratory to national standardsAutomatic short-path actuation with tactile impulse and audible signalDual scale with corresponding scale graduation (see table)Type BBCC with push-button releasePre-set DREMOMETER for serial production wherever the same value always needs to be appliedIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request) Technical features:Graduation: 10Precision +/-: +/- 3 %Graduation [lbf·ft]: 10 lbf·ftScale division [Nm]: 10 NmTorque (min.) [lbf·ft]: 115 lbf·ftTorque range (min./max.) [lbf·ft]: 115 lbf·ft - 560 lbf·ftGedore Code-Number: 1210921EAN: 4002805927380
Gedore 7564-01 Torque wrench DREMOMETER E A+S 750-2000 Nm Gedore 7564-01 Torque wrench DREMOMETER E A+S 750-2000 Nm Features:Technical advantage/Function: Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustmentthereby representing more process reliability of the userClassified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardLightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningSingle- and double-square drive for controlled bi-directional tighteningUse: Controlled screw tightening in the range of 6 - 3000 NmFor use in almost all industrial manufacturing areasFeatures: With certificate acc. to DIN EN ISO 6789traceable via in-house DAkkS laboratory to national standardsAutomatic short-path actuation with tactile impulse and audible signalDual scale with corresponding scale graduation (see table)Type BBCC with push-button releasePre-set DREMOMETER for serial production wherever the same value always needs to be appliedIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request) Technical features:Graduation: 50Torque range (min./max.) [lbf·ft]: -Precision +/-: +/- 3 %Drive square inch: 1Net weight [kg]: 11,6 kgTorque (max.) [Nm]: 2000 NmGedore Code-Number: 1547232EAN: 4002805923535
Gedore 7568-01 Torque wrench DREMOMETER DRL A+S 155-760 Nm Gedore 7568-01 Torque wrench DREMOMETER DRL A+S 155-760 Nm Features:Technical advantage/Function: Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustmentthereby representing more process reliability of the userClassified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardLightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningSingle- and double-square drive for controlled bi-directional tighteningUse: Controlled screw tightening in the range of 6 - 3000 NmFor use in almost all industrial manufacturing areasFeatures: With certificate acc. to DIN EN ISO 6789traceable via in-house DAkkS laboratory to national standardsAutomatic short-path actuation with tactile impulse and audible signalDual scale with corresponding scale graduation (see table)Type BBCC with push-button releasePre-set DREMOMETER for serial production wherever the same value always needs to be appliedIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request) Technical features:Graduation: 10Precision +/-: +/- 3 %Graduation [lbf·ft]: 10 lbf·ftScale division [Nm]: 10 NmTorque (min.) [lbf·ft]: 115 lbf·ftTorque range (min./max.) [lbf·ft]: 115 lbf·ft - 560 lbf·ftGedore Code-Number: 1210963EAN: 4002805927373
Gedore 7568-10 Torque wrench DREMOMETER DL A+S 155-760 Nm Gedore 7568-10 Torque wrench DREMOMETER DL A+S 155-760 Nm Features:Technical advantage/Function: Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustmentthereby representing more process reliability of the userClassified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardLightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningSingle- and double-square drive for controlled bi-directional tighteningUse: Controlled screw tightening in the range of 6 - 3000 NmFor use in almost all industrial manufacturing areasFeatures: With certificate acc. to DIN EN ISO 6789traceable via in-house DAkkS laboratory to national standardsAutomatic short-path actuation with tactile impulse and audible signalDual scale with corresponding scale graduation (see table)Type BBCC with push-button releasePre-set DREMOMETER for serial production wherever the same value always needs to be appliedIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request) Technical features:Graduation: 10Precision +/-: +/- 3 %Graduation [lbf·ft]: 10 lbf·ftScale division [Nm]: 10 NmTorque (min.) [lbf·ft]: 115 lbf·ftTorque range (min./max.) [lbf·ft]: 115 lbf·ft - 560 lbf·ftGedore Code-Number: 1210971EAN: 4002805927397
Gedore 7569-01 Torque wrench DREMOMETER EL A+S 750-2000 Nm Gedore 7569-01 Torque wrench DREMOMETER EL A+S 750-2000 Nm Features:Technical advantage/Function: Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustmentthereby representing more process reliability of the userClassified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardLightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningSingle- and double-square drive for controlled bi-directional tighteningUse: Controlled screw tightening in the range of 6 - 3000 NmFor use in almost all industrial manufacturing areasFeatures: With certificate acc. to DIN EN ISO 6789traceable via in-house DAkkS laboratory to national standardsAutomatic short-path actuation with tactile impulse and audible signalDual scale with corresponding scale graduation (see table)Type BBCC with push-button releasePre-set DREMOMETER for serial production wherever the same value always needs to be appliedIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request) Technical features:Graduation: 50Torque range (min./max.) [lbf·ft]: -Precision +/-: +/- 3 %Drive square inch: 1Net weight [kg]: 11,6 kgTorque (max.) [Nm]: 2000 NmGedore Code-Number: 1547240EAN: 4002805923542
Gedore 7571-01 Torque wrench DREMOMETER DX A+S 520-1000 Nm Gedore 7571-01 Torque wrench DREMOMETER DX A+S 520-1000 Nm Features:Technical advantage/Function: Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustmentthereby representing more process reliability of the userClassified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardLightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningSingle- and double-square drive for controlled bi-directional tighteningUse: Controlled screw tightening in the range of 6 - 3000 NmFor use in almost all industrial manufacturing areasFeatures: With certificate acc. to DIN EN ISO 6789traceable via in-house DAkkS laboratory to national standardsAutomatic short-path actuation with tactile impulse and audible signalDual scale with corresponding scale graduation (see table)Type BBCC with push-button releasePre-set DREMOMETER for serial production wherever the same value always needs to be appliedIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request) Technical features:Graduation: 10Precision +/-: +/- 3 %Graduation [lbf·ft]: 10 lbf·ftScale division [Nm]: 10 NmTorque (max.) [Nm]: 1000 NmCalibration length: 1290,5 mmGedore Code-Number: 1211005EAN: 4002805927427
Gedore 7573-00 Torque wrench DREMOMETER BC A+S 40-200 Nm Gedore 7573-00 Torque wrench DREMOMETER BC A+S 40-200 Nm Features:Technical advantage/Function: Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustmentthereby representing more process reliability of the userClassified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardLightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningSingle- and double-square drive for controlled bi-directional tighteningUse: Controlled screw tightening in the range of 6 - 3000 NmFor use in almost all industrial manufacturing areasFeatures: With certificate acc. to DIN EN ISO 6789traceable via in-house DAkkS laboratory to national standardsAutomatic short-path actuation with tactile impulse and audible signalDual scale with corresponding scale graduation (see table)Type BBCC with push-button releasePre-set DREMOMETER for serial production wherever the same value always needs to be appliedIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request) Technical features:Graduation: 5Precision +/-: +/- 3 %Net weight [kg]: 1,4 kgDrive square inch: 1/2Drive connector square [metric]: 12,5 mmTorque (max.) [lbf·ft]: 150 lbf·ftGedore Code-Number: 1211013EAN: 4002805927441
Gedore 7574-10 Torque wrench DREMOMETER DS A+S 110-550 Nm Gedore 7574-10 Torque wrench DREMOMETER DS A+S 110-550 Nm Features:Technical advantage/Function: Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustmentthereby representing more process reliability of the userClassified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardLightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningSingle- and double-square drive for controlled bi-directional tighteningUse: Controlled screw tightening in the range of 6 - 3000 NmFor use in almost all industrial manufacturing areasFeatures: With certificate acc. to DIN EN ISO 6789traceable via in-house DAkkS laboratory to national standardsAutomatic short-path actuation with tactile impulse and audible signalDual scale with corresponding scale graduation (see table)Type BBCC with push-button releasePre-set DREMOMETER for serial production wherever the same value always needs to be appliedIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request) Technical features:Graduation: 10Precision +/-: +/- 3 %Graduation [lbf·ft]: 10 lbf·ftScale division [Nm]: 10 NmTorque (min.) [Nm]: 110 NmTorque range (min./max.) [Nm]: 110 Nm - 550 NmGedore Code-Number: 1427164EAN: 4002805927465
Gedore 7575-10 Torque wrench DREMOMETER CDL A+S 80-360 Nm Gedore 7575-10 Torque wrench DREMOMETER CDL A+S 80-360 Nm Features:Technical advantage/Function: Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustmentthereby representing more process reliability of the userClassified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardLightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningSingle- and double-square drive for controlled bi-directional tighteningUse: Controlled screw tightening in the range of 6 - 3000 NmFor use in almost all industrial manufacturing areasFeatures: With certificate acc. to DIN EN ISO 6789traceable via in-house DAkkS laboratory to national standardsAutomatic short-path actuation with tactile impulse and audible signalDual scale with corresponding scale graduation (see table)Type BBCC with push-button releasePre-set DREMOMETER for serial production wherever the same value always needs to be appliedIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request) Technical features:Graduation: 10Precision +/-: +/- 3 %Net weight [kg]: 2,4 kgDrive connector square [metric]: 20 mmDistance housing - square drive: 22,5 mmTorque (max.) [lbf·ft]: 260 lbf·ftGedore Code-Number: 1211021EAN: 4002805927410
Gedore 7579-10 Torque wrench DREMOMETER DSL A+S 110-550 Nm Gedore 7579-10 Torque wrench DREMOMETER DSL A+S 110-550 Nm Features:Technical advantage/Function: Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustmentthereby representing more process reliability of the userClassified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardLightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningSingle- and double-square drive for controlled bi-directional tighteningUse: Controlled screw tightening in the range of 6 - 3000 NmFor use in almost all industrial manufacturing areasFeatures: With certificate acc. to DIN EN ISO 6789traceable via in-house DAkkS laboratory to national standardsAutomatic short-path actuation with tactile impulse and audible signalDual scale with corresponding scale graduation (see table)Type BBCC with push-button releasePre-set DREMOMETER for serial production wherever the same value always needs to be appliedIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request) Technical features:Graduation: 10Precision +/-: +/- 3 %Graduation [lbf·ft]: 10 lbf·ftScale division [Nm]: 10 NmTorque (min.) [Nm]: 110 NmTorque range (min./max.) [Nm]: 110 Nm - 550 NmGedore Code-Number: 1427148EAN: 4002805927472
Gedore TSN 25 D Torque wrench TSN SLIPPER 5-25 Nm Gedore TSN 25 D Torque wrench TSN SLIPPER 5-25 Nm Features:Use: Controlled screw tightening in the range of 5 - 25 NmSerial / production-lineExtremely long-term workFeatures: Pre-set production torque wrench - without scale1/4 square drive with ball locking deviceWith integrated ratchet-function for controlled clockwise tighteningWorking accuracy: +/- 4 % tolerance of set torqueAcc. to DIN EN ISO 6789traceable to national standardsPrecision mechanism slips very noticeably and audibly ("click") when the pre-set value is achieved - over-tightening is not possibleAutomatic resetting to the starting positionLightweightbut robust and corrosion-resistant construction designVery convenient non-slip rubber handgripThe pre-setting can be made at the factory or by the user on suitable torque testersIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request)EPA-conformant (Electrostatic Protected Area)for use in sensitive electrostatic applicationsScope of delivery: Torque wrench type TSN SLIPPERSpecial adjusting key for changing the pre-set torque valueTest certificate acc. to DIN EN ISO 6789Delivery in sturdy cardboard packaging" Technical features:Precision +/-: +/- 4 %Net weight [kg]: 0,34 kgDrive square inch: 1/4Torque (max.) [lbf·ft]: 18 lbf·ftTotal length [mm]: 216 mmTorque (min.) [lbf·in]: 221 lbf·inGedore Code-Number: 7091900EAN: 4002805759004
Gedore TSN 25 A Torque wrench TSN SLIPPER 5-25 Nm Gedore TSN 25 A Torque wrench TSN SLIPPER 5-25 Nm Features:Use: Controlled screw tightening in the range of 5 - 25 NmSerial / production-lineExtremely long-term workFeatures: Pre-set production torque wrench - without scale3/8 square drive with ball lockWith integrated ratchet-function for controlled clockwise tighteningWorking accuracy: +/- 4 % tolerance of set torqueAcc. to DIN EN ISO 6789traceable to national standardsPrecision mechanism slips very noticeably and audibly ("click") when the pre-set value is achieved - over-tightening is not possibleAutomatic resetting to the starting positionLightweightbut robust and corrosion-resistant construction designVery convenient non-slip rubber handgripThe pre-setting can be made at the factory or by the user on suitable torque testersIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request)EPA-conformant (Electrostatic Protected Area)for use in sensitive electrostatic applicationsScope of delivery: Torque wrench type TSN SLIPPERSpecial adjusting key for changing the pre-set torque valueTest certificate acc. to DIN EN ISO 6789Delivery in sturdy cardboard packaging" Technical features:Precision +/-: +/- 4 %Net weight [kg]: 0,34 kgDrive connector square [metric]: 10 mmTorque (max.) [lbf·ft]: 18 lbf·ftTotal length [mm]: 216 mmTorque (min.) [lbf·in]: 221 lbf·inGedore Code-Number: 7092040EAN: 4002805759011
Gedore TSN 55 Torque wrench TSN SLIPPER 15-55 Nm Gedore TSN 55 Torque wrench TSN SLIPPER 15-55 Nm Features:Use: Controlled screw tightening in the range of 15 - 55 NmSerial / production-lineExtremely long-term workFeatures: Pre-set production torque wrench - without scale3/8 square drive with ball lockWith integrated ratchet-function for controlled clockwise tighteningWorking accuracy: +/- 4 % tolerance of set torqueAcc. to DIN EN ISO 6789traceable to national standardsPrecision mechanism slips very noticeably and audibly ("click") when the pre-set value is achieved - over-tightening is not possibleAutomatic resetting to the starting positionLightweightbut robust and corrosion-resistant construction designVery convenient non-slip rubber handgripThe pre-setting can be made at the factory or by the user on suitable torque testersIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request)EPA-conformant (Electrostatic Protected Area)for use in sensitive electrostatic applicationsScope of delivery: Torque wrench type TSN SLIPPERSpecial adjusting key for changing the pre-set torque valueTest certificate acc. to DIN EN ISO 6789Delivery in sturdy cardboard packaging" Technical features:Precision +/-: +/- 4 %Net weight [kg]: 0,8 kgTorque (min.) [lbf·ft]: 10 lbf·ftTorque range (min./max.) [lbf·ft]: 10 lbf·ft - 40 lbf·ftDrive connector square [metric]: 10 mmTorque (max.) [lbf·in]: 132 lbf·inGedore Code-Number: 7092120EAN: 4002805759028
Gedore TSN 125 Torque wrench TSN SLIPPER 40-125 Nm Gedore TSN 125 Torque wrench TSN SLIPPER 40-125 Nm Features:Use: Controlled screw tightening in the range of 40 - 125 NmSerial / production-lineExtremely long-term workFeatures: Pre-set production torque wrench - without scale1/2 square drive with ball lockWith integrated ratchet-function for controlled clockwise tighteningWorking accuracy: +/- 4 % tolerance of set torqueAcc. to DIN EN ISO 6789traceable to national standardsPrecision mechanism slips very noticeably and audibly ("click") when the pre-set value is achieved - over-tightening is not possibleAutomatic resetting to the starting positionLightweightbut robust and corrosion-resistant construction designVery convenient non-slip rubber handgripThe pre-setting can be made at the factory or by the user on suitable torque testersIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request)EPA-conformant (Electrostatic Protected Area)for use in sensitive electrostatic applicationsScope of delivery: Torque wrench type TSN SLIPPERSpecial adjusting key for changing the pre-set torque valueTest certificate acc. to DIN EN ISO 6789Delivery in sturdy cardboard packaging" Technical features:Precision +/-: +/- 4 %Net weight [kg]: 1,36 kgDrive square inch: 1/2Torque (min.) [lbf·in]: 1106 lbf·inDrive connector square [metric]: 12,5 mmTorque (max.) [Nm]: 125 NmGedore Code-Number: 7092200EAN: 4002805759035
Gedore TBN 2 G Breaking torque wrench TBN KNICKER 0,4-2 Nm Gedore TBN 2 G Breaking torque wrench TBN KNICKER 0,4-2 Nm Features:Use: Controlled screw tightening in the range of 04 - 2 NmSerial / production-lineExtremely long-term workFeatures: Pre-set production torque wrench - without scaleWith 9x12 mm rectangular-cavity-endFor bi-directional tightening (the wrench only has to be turned by 180°!)Working accuracy: +/- 4 % tolerance of set torqueAcc. to DIN EN ISO 6789traceable to national standardsBreaking of the handgrip by 20° when the pre-set torque value is achieved makes over-tightening unlikelyAutomatic resetting to the starting positionLightweightbut robust and corrosion-resistant construction designVery convenient non-slip rubber handgripNo. TBN 2 G: EPA (Electrostatic Protected Area) compliantfor use in electrostatically sensitive applicationsThe pre-setting can be made at the factory or by the user on suitable torque testersIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request)Scope of delivery: Torque wrench TBN Breaking Torque wrenchSpecial adjusting key for changing the pre-set torque valueTest certificate acc. to DIN EN ISO 6789Delivery in sturdy cardboard packaging Technical features:Precision +/-: +/- 6 %Net weight [kg]: 0,11 kgTorque (min.) [Nm]: 0,4 NmTotal length [mm]: 133 mmTorque (min.) [lbf·in]: 18 lbf·inTorque (max.) [Nm]: 2 NmGedore Code-Number: 7090690EAN: 4002805760000
Gedore TBN 10 G Breaking torque wrench TBN KNICKER 2-10 Nm Gedore TBN 10 G Breaking torque wrench TBN KNICKER 2-10 Nm Features:Use: Controlled screw tightening in the range of 2 - 10 NmSerial / production-lineExtremely long-term workFeatures: Pre-set production torque wrench - without scaleWith 9x12 mm rectangular-cavity-endFor bi-directional tightening (the wrench only has to be turned by 180°!)Working accuracy: +/- 4 % tolerance of set torqueAcc. to DIN EN ISO 6789traceable to national standardsBreaking of the handgrip by 20° when the pre-set torque value is achieved makes over-tightening unlikelyAutomatic resetting to the starting positionLightweightbut robust and corrosion-resistant construction designVery convenient non-slip rubber handgripNo. TBN 2 G: EPA (Electrostatic Protected Area) compliantfor use in electrostatically sensitive applicationsThe pre-setting can be made at the factory or by the user on suitable torque testersIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request)Scope of delivery: Torque wrench TBN Breaking Torque wrenchSpecial adjusting key for changing the pre-set torque valueTest certificate acc. to DIN EN ISO 6789Delivery in sturdy cardboard packaging Technical features:Precision +/-: +/- 6 %Net weight [kg]: 0,15 kgTorque (max.) [Nm]: 10 NmTotal length [mm]: 133 mmTorque (max.) [lbf·in]: 17,8 lbf·inTorque (min.) [Nm]: 2 NmGedore Code-Number: 7090770EAN: 4002805760017
Gedore TBN 25 G Breaking torque wrench TBN KNICKER 5-25 Nm Gedore TBN 25 G Breaking torque wrench TBN KNICKER 5-25 Nm Features:Use: Controlled screw tightening in the range of 5 - 25 NmSerial / production-lineExtremely long-term workFeatures: Pre-set production torque wrench - without scaleWith 9x12 mm rectangular-cavity-endFor bi-directional tightening (the wrench only has to be turned by 180°!)Working accuracy: +/- 4 % tolerance of set torqueAcc. to DIN EN ISO 6789traceable to national standardsBreaking of the handgrip by 20° when the pre-set torque value is achieved makes over-tightening unlikelyAutomatic resetting to the starting positionLightweightbut robust and corrosion-resistant construction designVery convenient non-slip rubber handgripNo. TBN 2 G: EPA (Electrostatic Protected Area) compliantfor use in electrostatically sensitive applicationsThe pre-setting can be made at the factory or by the user on suitable torque testersIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request)Scope of delivery: Torque wrench TBN Breaking Torque wrenchSpecial adjusting key for changing the pre-set torque valueTest certificate acc. to DIN EN ISO 6789Delivery in sturdy cardboard packaging Technical features:Precision +/-: +/- 4 %Net weight [kg]: 0,41 kgTorque (max.) [lbf·ft]: 18 lbf·ftTorque (min.) [lbf·in]: 221 lbf·inTorque (max.) [Nm]: 25 NmTotal length [mm]: 265 mmGedore Code-Number: 1824694EAN: 4002805928318
Gedore TBN 65 G Breaking torque wrench TBN KNICKER 10-65 Nm Gedore TBN 65 G Breaking torque wrench TBN KNICKER 10-65 Nm Features:Use: Controlled screw tightening in the range of 10 - 65 NmSerial / production-lineExtremely long-term workFeatures: Pre-set production torque wrench - without scaleWith 9x12 mm rectangular-cavity-endFor bi-directional tightening (the wrench only has to be turned by 180°!)Working accuracy: +/- 4 % tolerance of set torqueAcc. to DIN EN ISO 6789traceable to national standardsBreaking of the handgrip by 20° when the pre-set torque value is achieved makes over-tightening unlikelyAutomatic resetting to the starting positionLightweightbut robust and corrosion-resistant construction designVery convenient non-slip rubber handgripNo. TBN 2 G: EPA (Electrostatic Protected Area) compliantfor use in electrostatically sensitive applicationsThe pre-setting can be made at the factory or by the user on suitable torque testersIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request)Scope of delivery: Torque wrench TBN Breaking Torque wrenchSpecial adjusting key for changing the pre-set torque valueTest certificate acc. to DIN EN ISO 6789Delivery in sturdy cardboard packaging Technical features:Precision +/-: +/- 4 %Net weight [kg]: 0,75 kgTorque (min.) [Nm]: 10 NmTorque (max.) [lbf·in]: 115 lbf·inTotal length [mm]: 302 mmTorque (max.) [lbf·ft]: 48 lbf·ftGedore Code-Number: 1824716EAN: 4002805928271
Gedore TSN 5/45 Torque wrench TSN SLIPPER 1-5 Nm Gedore TSN 5/45 Torque wrench TSN SLIPPER 1-5 Nm Features:Use: Controlled screw tightening in the range of 1 - 5 NmSerial / production-lineExtremely long-term workFeatures: Pre-set production torque wrench - without scale1/43/8" or 1/2" square drive with ball locking deviceWith integrated ratchet-function for controlled clockwise tighteningWorking accuracy: +/- 6 % tolerance of set torqueAcc. to DIN EN ISO 6789traceable to national standardsPrecision mechanism slips very noticeably and audibly ("click") when the pre-set value is achieved - over-tightening is not possibleAutomatic resetting to the starting positionLightweightbut robust and corrosion-resistant construction designVery convenient non-slip rubber handgripThe pre-setting can be made at the factory or by the user on suitable torque testersIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request)EPA-conformant (Electrostatic Protected Area)for use in sensitive electrostatic applicationsScope of delivery: Torque wrench type TSN SLIPPERSpecial adjusting key for changing the pre-set torque valueTest certificate acc. to DIN EN ISO 6789Delivery in sturdy cardboard packaging" Technical features:Torque range (min./max.) [lbf·ft]: -Precision +/-: +/- 4 %Net weight [kg]: 0,19 kgTorque (min.) [Nm]: 1 NmTorque range (min./max.) [Nm]: 1 Nm - 5 NmDrive square inch: 1/4Gedore Code-Number: 1196650EAN: 4002805918319
Gedore TSN 10/90 Torque wrench TSN SLIPPER 2-10 Nm Gedore TSN 10/90 Torque wrench TSN SLIPPER 2-10 Nm Features:Use: Controlled screw tightening in the range of 2 - 10 NmSerial / production-lineExtremely long-term workFeatures: Pre-set production torque wrench - without scale1/4 square drive with ball locking deviceWith integrated ratchet-function for controlled clockwise tighteningWorking accuracy: +/- 6 % tolerance of set torqueAcc. to DIN EN ISO 6789traceable to national standardsPrecision mechanism slips very noticeably and audibly ("click") when the pre-set value is achieved - over-tightening is not possibleAutomatic resetting to the starting positionLightweightbut robust and corrosion-resistant construction designVery convenient non-slip rubber handgripThe pre-setting can be made at the factory or by the user on suitable torque testersIf fixed setting at the factory is desired is requiredplease state the Nm value when ordering (price on request)EPA-conformant (Electrostatic Protected Area)for use in sensitive electrostatic applicationsScope of delivery: Torque wrench type TSN SLIPPERSpecial adjusting key for changing the pre-set torque valueTest certificate acc. to DIN EN ISO 6789Delivery in sturdy cardboard packaging" Technical features:Torque range (min./max.) [lbf·ft]: -Precision +/-: +/- 4 %Net weight [kg]: 0,19 kgDrive square inch: 1/4Torque (max.) [Nm]: 10 NmTorque (min.) [Nm]: 2 NmGedore Code-Number: 1196731EAN: 4002805919927
