Gedore EDS 2000 S Dial torque wrench with signal 400-2000 Nm Gedore EDS 2000 S Dial torque wrench with signal 400-2000 Nm Features:Use: Controlled tightening and verification of tightening valuesFor use in almost all industrial manufacturing areasWorking ranges from 0.8 - 2000 Nm / 7 lbf·in - 1500 lbf·ft are coveredFeatures: Dial-indicating torque wrench with dual scale and slave pointer1/43/8"1/2"3/4" or 1" double square drive with ball lock for controlled right and left tighteningVersatile usage. Use for MaintenanceRepairAssembly and Quality ControlFor controlled screw tightening and torque measurementsDisplay accuracy: +/- 4 % tolerance of the indicated valueAcc. to DIN EN ISO 6789traceable to national standardsWith dual scale in Nm and lbf·in or lbf·ft double-tinted clearly readable face5 % overload of the maximum valueHousing made of lightrobust special aluminium construction - painted silver-greyBlacknon-slip rubber handgripsModel No. ADS 4 to No. ADS 40: EPA (Electrostatic Protected Area) compliantfor use in electrostatically sensitive applicationsWith audio-visual signalTest certificate acc. to DIN EN ISO 6789" Technical features:Graduation: 50Drive square inch: 1Total height [mm]: 138 mmTorque (max.) [lbf·ft]: 1500 lbf·ftNet weight [kg]: 16,7 kgTotal length [mm]: 2.040 mmGedore Code-Number: 1196804EAN: 4002805918166
Gedore 8480-01 Torque wrench DREMOMETER A-SE 8-40 Nm Gedore 8480-01 Torque wrench DREMOMETER A-SE 8-40 Nm Features:Classified as per DIN EN ISO 6789-2:2017 Type II Class A - adjusted to a maximum permissible +/-3% deviation and thus with a greater precision than the standard-stipulated +/-4%Lightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyDrive offers extensive range of accessoriesDepending on the applicationaccess is possible from the front (e.g. open-end fitting) or side (e.g. reversible ratchet and socket).Force to be applied in the middle of the handgrip only - do not use an extension tube as otherwiseinaccuracies can evolveOperation only with end fittings otherwise inaccuracies can arise. Keep the depth gauges on the certificate in mind. Only use original GEDORE accessories.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningEasy adjustment thanks to attractive adjusting button secured against loss at the end of the handleWith certificate acc. to DIN EN ISO 6789-2:2017traceable via in-house DAkkS laboratory to national standards Technical features:Graduation: 5Torque range (min./max.) [lbf·ft]: -Precision +/-: +/- 3 %Net weight [kg]: 0,95 kgDistance housing - square drive: 16,5 mmDepth gauge [metric]: 17,5 mmGedore Code-Number: 7714060EAN: 4002805848012
Gedore 8481-01 Torque wrench DREMOMETER B-SE 25-120 Nm Gedore 8481-01 Torque wrench DREMOMETER B-SE 25-120 Nm Features:Classified as per DIN EN ISO 6789-2:2017 Type II Class A - adjusted to a maximum permissible +/-3% deviation and thus with a greater precision than the standard-stipulated +/-4%Lightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyDrive offers extensive range of accessoriesDepending on the applicationaccess is possible from the front (e.g. open-end fitting) or side (e.g. reversible ratchet and socket).Force to be applied in the middle of the handgrip only - do not use an extension tube as otherwiseinaccuracies can evolveOperation only with end fittings otherwise inaccuracies can arise. Keep the depth gauges on the certificate in mind. Only use original GEDORE accessories.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningEasy adjustment thanks to attractive adjusting button secured against loss at the end of the handleWith certificate acc. to DIN EN ISO 6789-2:2017traceable via in-house DAkkS laboratory to national standards Technical features:Graduation: 5Precision +/-: +/- 3 %Net weight [kg]: 1,25 kgTorque (max.) [Nm]: 120 NmDistance housing - square drive: 16,5 mmDepth gauge [metric]: 17,5 mmGedore Code-Number: 7714140EAN: 4002805848111
Gedore 8482-01 Torque wrench DREMOMETER C-SE A+S 80-400 Nm Gedore 8482-01 Torque wrench DREMOMETER C-SE A+S 80-400 Nm Features:Classified as per DIN EN ISO 6789-2:2017 Type II Class A - adjusted to a maximum permissible +/-3% deviation and thus with a greater precision than the standard-stipulated +/-4%Lightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyDrive offers extensive range of accessoriesDepending on the applicationaccess is possible from the front (e.g. open-end fitting) or side (e.g. reversible ratchet and socket).Force to be applied in the middle of the handgrip only - do not use an extension tube as otherwiseinaccuracies can evolveOperation only with end fittings otherwise inaccuracies can arise. Keep the depth gauges on the certificate in mind. Only use original GEDORE accessories.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningEasy adjustment thanks to attractive adjusting button secured against loss at the end of the handleWith certificate acc. to DIN EN ISO 6789-2:2017traceable via in-house DAkkS laboratory to national standards Technical features:Graduation: 5Precision +/-: +/- 3 %Net weight [kg]: 1,7 kgDrive connector rectangular: 14 x 18 mmDistance housing - square drive: 16,5 mmInsertion depth 1: 25,0 mmGedore Code-Number: 7714220EAN: 4002805848210
Gedore 8554-01 Torque wrench DREMOMETER AM 6-30 Nm Gedore 8554-01 Torque wrench DREMOMETER AM 6-30 Nm Features:Use: Controlled screw tightening in the range of 6 - 30 Nm / 50 - 270 lbf·inFeatures: Classified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standard1/4 square drive with ball locking device as per DIN 3120 - A 6.3 ISO 1174Automatic short-path actuation with tactile impulse and audible signalDual scale with a scale graduation of 1 Nm and 10 lbf·inTechnical advantage/Function: Lightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningEasy adjustment thanks to attractive adjusting button secured against loss at the end of the handle" Technical features:Torque range (min./max.) [lbf·ft]: -Precision +/-: +/- 3 %Net weight [kg]: 0,85 kgScale division [Nm]: 1 NmDrive square inch: 1/4Graduation [lbf·in]: 10 lbf·inGedore Code-Number: 7775440EAN: 4002805855409
Gedore 8560-01 Torque wrench DREMOMETER A 8-40 Nm Gedore 8560-01 Torque wrench DREMOMETER A 8-40 Nm Features:Use: Controlled screw tightening in the range of 8 - 40 Nm / 70 - 350 lbf·inFor use in almost all industrial manufacturing areasFeatures: Classified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standard3/8 square drive with pin-locking mechanism DIN 3120 - A 20ISO 1174Automatic short-path actuation with tactile impulse and audible signalDual scale with a scale graduation of 5 Nm and 50 lbf·inTechnical advantage/Function: Lightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningEasy adjustment thanks to attractive adjusting button secured against loss at the end of the handleSingle- and double-square drive for controlled bi-directional tightening" Technical features:Torque range (min./max.) [lbf·ft]: -Precision +/-: +/- 3 %Net weight [kg]: 0,848 kgDrive connector square [metric]: 10 mmDistance housing - square drive: 17,5 mmCalibration length: 262 mmGedore Code-Number: 7682000EAN: 4002805856017
Gedore 8561-01 Torque wrench DREMOMETER B 25-120 Nm Gedore 8561-01 Torque wrench DREMOMETER B 25-120 Nm Features:Use: Controlled screw tightening in the range of 25 - 120 Nm / 18 - 90 lbf·ftFor use in almost all industrial manufacturing areasFeatures: Classified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standard1/2 square drive with ball locking device as per DIN 3120 - A 12.5ISO 1174Automatic short-path actuation with tactile impulse and audible signalDual scale with a scale graduation of 5 Nm and 5 lbf·ftWith push-button releaseTechnical advantage/Function: Lightweight and robust - housing made of a high-quality aluminium alloyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningEasy adjustment thanks to attractive adjusting button secured against loss at the end of the handleSingle- and double-square drive for controlled bi-directional tightening" Technical features:Precision +/-: +/- 3 %Net weight [kg]: 1,5 kgDrive square inch: 1/2Drive connector square [metric]: 12,5 mmTorque (max.) [Nm]: 120 NmDistance housing - square drive: 17,5 mmGedore Code-Number: 7683320EAN: 4002805856116
Gedore 8562-10 Torque wrench DREMOMETER C 60-300 Nm Gedore 8562-10 Torque wrench DREMOMETER C 60-300 Nm Features:Use: Controlled screw tightening in the range of 60 - 300 Nm / 45 - 220 lbf·ftFor use in almost all industrial manufacturing areasFeatures: Classified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standard1/2 square drive with ball locking device as per DIN 3120 - A 12.5ISO 1174Automatic short-path actuation with tactile impulse and audible signalDual scale with a scale graduation of 5 Nm and 5 lbf·ftWith push-button releaseTechnical advantage/Function: Lightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningEasy adjustment thanks to attractive adjusting button secured against loss at the end of the handleSingle- and double-square drive for controlled bi-directional tightening" Technical features:Graduation: 5Precision +/-: +/- 3 %Drive square inch: 1/2Drive connector square [metric]: 12,5 mmDistance housing - square drive: 17,5 mmNet weight [kg]: 2 kgGedore Code-Number: 7685450EAN: 4002805856215
Gedore 8563-01 Torque wrench DREMOMETER DR 155-760 Nm Gedore 8563-01 Torque wrench DREMOMETER DR 155-760 Nm Features:Use: Controlled screw tightening in the range of 155 - 760 Nm / 115 - 560 lbf·ftFor use in almost all industrial manufacturing areasFeatures: Classified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standard3/4 square drive with pin-locking mechanism DIN 3120 - B 20ISO 1174Automatic short-path actuation with tactile impulse and audible signalDouble scale with a scale division of 10 Nm and 10 lbf ftTechnical advantage/Function: Lightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningEasy adjustment thanks to attractive adjusting button secured against loss at the end of the handleSingle- and double-square drive for controlled bi-directional tightening" Technical features:Precision +/-: +/- 3 %Graduation [lbf·ft]: 10 lbf·ftTorque (min.) [lbf·ft]: 115 lbf·ftTorque range (min./max.) [lbf·ft]: 115 lbf·ft - 560 lbf·ftCalibration length: 1290,5 mmTorque (min.) [Nm]: 155 NmGedore Code-Number: 7670180EAN: 4002805863015
Gedore 8563-10 Torque wrench DREMOMETER D 155-760 Nm Gedore 8563-10 Torque wrench DREMOMETER D 155-760 Nm Features:Use: Controlled screw tightening in the range of 155 - 760 Nm / 115 - 560 lbf·ftFor use in almost all industrial manufacturing areasFeatures: Classified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standard3/4 square drive with pin-locking mechanism DIN 3120 - B 20ISO 1174Automatic short-path actuation with tactile impulse and audible signalDouble scale with a scale division of 10 Nm and 10 lbf ftTechnical advantage/Function: Lightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches). Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningEasy adjustment thanks to attractive adjusting button secured against loss at the end of the handleSingle- and double-square drive for controlled bi-directional tightening" Technical features:Precision +/-: +/- 3 %Graduation [lbf·ft]: 10 lbf·ftTorque (min.) [lbf·ft]: 115 lbf·ftTorque range (min./max.) [lbf·ft]: 115 lbf·ft - 560 lbf·ftTorque (min.) [Nm]: 155 NmTorque range (min./max.) [Nm]: 155 Nm - 760 NmGedore Code-Number: 7691500EAN: 4002805856314
Gedore 8570-10 Torque wrench DREMOMETER CD 80-360 Nm Gedore 8570-10 Torque wrench DREMOMETER CD 80-360 Nm Features:Use: Controlled screw tightening in the range of 80 - 360 Nm / 60 - 260 lbf·ftFor use in almost all industrial manufacturing areasFeatures: Classified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standard3/4 square drive with pin-locking mechanism DIN 3120 - B 20ISO 1174Automatic short-path actuation with tactile impulse and audible signalDual scale with a scale graduation of 5 Nm and 5 lbf·ftTechnical advantage/Function: Lightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningEasy adjustment thanks to attractive adjusting button secured against loss at the end of the handleSingle- and double-square drive for controlled bi-directional tightening" Technical features:Precision +/-: +/- 3 %Net weight [kg]: 2,8 kgDrive connector square [metric]: 20 mmDistance housing - square drive: 22,5 mmTorque (max.) [lbf·ft]: 260 lbf·ftDrive square inch: 3/4Gedore Code-Number: 7688470EAN: 4002805857014
Gedore 8571-01 Torque wrench DREMOMETER DX 520-1000 Nm Gedore 8571-01 Torque wrench DREMOMETER DX 520-1000 Nm Features:Use: Controlled screw tightening in the range of 520 - 1000 Nm / 380 - 730 lbf·ftFor use in almost all industrial manufacturing areasFeatures: Classified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standard3/4 square drive with pin-locking mechanism DIN 3120 - B 20ISO 1174Automatic short-path actuation with tactile impulse and audible signalDouble scale with a scale division of 10 Nm and 10 lbf ftTechnical advantage/Function: Lightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningEasy adjustment thanks to attractive adjusting button secured against loss at the end of the handleSingle- and double-square drive for controlled bi-directional tightening" Technical features:Precision +/-: +/- 3 %Graduation [lbf·ft]: 10 lbf·ftScale division [Nm]: 10 NmTorque (max.) [Nm]: 1000 NmCalibration length: 1290,5 mmDrive connector square [metric]: 20 mmGedore Code-Number: 7694010EAN: 4002805857113
Gedore 8572-01 Torque wrench DREMOMETER F 1500-3000 Nm Gedore 8572-01 Torque wrench DREMOMETER F 1500-3000 Nm Features:Use: Controlled screw tightening in the range of 1500 - 3000 NmFor use in almost all industrial manufacturing areasFeatures: Classified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standard1.1/2 square drive with pin-locking mechanism DIN 3121 - F 40ISO 1174Automatic short-path actuation with tactile impulse and audible signalSingle scale with a scale graduation of 50 NmTechnical advantage/Function: Lightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningEasy adjustment thanks to attractive adjusting button secured against loss at the end of the handleFor controlled directional tightening" Technical features:Torque range (min./max.) [lbf·ft]: -Precision +/-: +/- 3 %Total length [mm]: 1.037 mmDrive square inch: 1.1/2Net weight [kg]: 15 kgTorque (min.) [Nm]: 1500 NmGedore Code-Number: 7717160EAN: 4002805857212
Gedore 8573-00 Torque wrench DREMOMETER BC 40-200 Nm Gedore 8573-00 Torque wrench DREMOMETER BC 40-200 Nm Features:Use: Controlled screw tightening in the range of 40 - 200 Nm / 30 - 150 lbf·ftFor use in almost all industrial manufacturing areasFeatures: Classified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standard1/2 square drive with ball locking device as per DIN 3120 - A 12.5ISO 1174Automatic short-path actuation with tactile impulse and audible signalDual scale with a scale graduation of 5 Nm and 5 lbf·ftWith push-button releaseTechnical advantage/Function: Lightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningEasy adjustment thanks to attractive adjusting button secured against loss at the end of the handleSingle- and double-square drive for controlled bi-directional tightening" Technical features:Precision +/-: +/- 3 %Net weight [kg]: 1,4 kgDrive square inch: 1/2Drive connector square [metric]: 12,5 mmTorque (max.) [lbf·ft]: 150 lbf·ftDistance housing - square drive: 17,5 mmGedore Code-Number: 7685530EAN: 4002805857311
Gedore 8574-10 Torque wrench DREMOMETER DS 110-550 Nm Gedore 8574-10 Torque wrench DREMOMETER DS 110-550 Nm Features:Use: Controlled screw tightening in the range of 110 - 550 Nm / 80 - 400 lbf·ftFor use in almost all industrial manufacturing areasFeatures: Classified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standard3/4 square drive with pin-locking mechanism DIN 3120 - B 20ISO 1174Automatic short-path actuation with tactile impulse and audible signalDouble scale with a scale division of 10 Nm and 10 lbf ftTechnical advantage/Function: Lightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningEasy adjustment thanks to attractive adjusting button secured against loss at the end of the handleSingle- and double-square drive for controlled bi-directional tightening" Technical features:Precision +/-: +/- 3 %Graduation [lbf·ft]: 10 lbf·ftScale division [Nm]: 10 NmTorque (min.) [Nm]: 110 NmTorque range (min./max.) [Nm]: 110 Nm - 550 NmNet weight [kg]: 2,9 kgGedore Code-Number: 1427156EAN: 4002805921531
Gedore 8579-10 Torque wrench DREMOMETER DSL 110-550 Nm Gedore 8579-10 Torque wrench DREMOMETER DSL 110-550 Nm Features:Use: Controlled screw tightening in the range of 110 - 550 Nm / 80 - 400 lbf·ftFor use in almost all industrial manufacturing areasFeatures: Classified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standard3/4 square drive with pin-locking mechanism DIN 3120 - B 20ISO 1174Automatic short-path actuation with tactile impulse and audible signalDouble scale with a scale division of 10 Nm and 10 lbf ftTechnical advantage/Function: Lightweight yet robust (as the housing is made of an aluminium alloy) and resilientvery workshop-friendlyNo inaccuracies whether used with both hands or held away from the handle (as for standard torque wrenches)Both the square drive and fulcrum are on an axis which ensures a high degree of user safety - can be extended to reduce the user's working load.Extremely low wear attributable to reduced forces in a lever mechanismForged lever chain from our group own quality forgeMaximum precision even when subjected to extreme continuous useLong life cycles and tool livesEasy operation - fast and safe torque tighteningEasy adjustment thanks to attractive adjusting button secured against loss at the end of the handleSingle- and double-square drive for controlled bi-directional tightening" Technical features:Precision +/-: +/- 3 %Graduation [lbf·ft]: 10 lbf·ftScale division [Nm]: 10 NmTorque (min.) [Nm]: 110 NmTorque range (min./max.) [Nm]: 110 Nm - 550 NmNet weight [kg]: 2,9 kgGedore Code-Number: 1427121EAN: 4002805921548
Gedore DMK 100 Torque wrench DREMASTER® K 20-100 Nm Gedore DMK 100 Torque wrench DREMASTER® K 20-100 Nm Features:Use: Controlled screw tightening in the range of 20 - 100 Nm / 15 - 75 lbf·ftAdjustablereleasing and sturdy tubular torque wrench with integrated ratchet and with square drive for industry and the tradesFeatures: Classified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardFor controlled bi-directional tighteningModels DMK: 1/2 mushroom head interchangeable square with push-button releasing and a ball-locking mechanism. From Model No. DMK 400 with 3/4" push-through square and a pin-locking mechanismSturdyvarnished tubular steel constructionwith zinc-plated ratchet head and top-grade plastic partsErgonomically shaped plastic handgrip with calibration aidChange-over between Nm main scale and lbf·ft ancillary scale to avoid reading errors when setting the torque wantedWith micrometre scale for main Nm scale for setting interim valuesRelease system triggers a tactile and audible signalErgonomic system for torque adjustment with reference symbolProvision for rapid setting with hexagon allen keynot includedSecured adjusting/setting system" Technical features:Number of teeth: 48Precision +/-: +/- 3 %vernier Nm: 0,5 NmNet weight [kg]: 1,25 kgDrive square inch: 1/2Torque (max.) [Nm]: 100 NmGedore Code-Number: 2641232EAN: 4002805931370
Gedore DMK 200 Torque wrench DREMASTER® K 40-200 Nm Gedore DMK 200 Torque wrench DREMASTER® K 40-200 Nm Features:Use: Controlled screw tightening in the range of 40 - 200 Nm / 30 - 150 lbf·ftAdjustablereleasing and sturdy tubular torque wrench with integrated ratchet and with square drive for industry and the tradesFeatures: Classified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardFor controlled bi-directional tighteningModels DMK: 1/2 mushroom head interchangeable square with push-button releasing and a ball-locking mechanism. From Model No. DMK 400 with 3/4" push-through square and a pin-locking mechanismSturdyvarnished tubular steel constructionwith zinc-plated ratchet head and top-grade plastic partsErgonomically shaped plastic handgrip with calibration aidChange-over between Nm main scale and lbf·ft ancillary scale to avoid reading errors when setting the torque wantedWith micrometre scale for main Nm scale for setting interim valuesRelease system triggers a tactile and audible signalErgonomic system for torque adjustment with reference symbolProvision for rapid setting with hexagon allen keynot includedSecured adjusting/setting system" Technical features:Number of teeth: 48Precision +/-: +/- 3 %vernier Nm: 1 NmNet weight [kg]: 1,4 kgDrive square inch: 1/2Graduation [lbf·ft]: 10 lbf·ftGedore Code-Number: 2641240EAN: 4002805931387
Gedore DMK 300 Torque wrench DREMASTER® K 60-300 Nm Gedore DMK 300 Torque wrench DREMASTER® K 60-300 Nm Features:Use: Controlled screw tightening in the range of 60 - 300 Nm / 45 - 220 lbf·ftAdjustablereleasing and sturdy tubular torque wrench with integrated ratchet and with square drive for industry and the tradesFeatures: Classified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardFor controlled bi-directional tighteningModels DMK: 1/2 mushroom head interchangeable square with push-button releasing and a ball-locking mechanism. From Model No. DMK 400 with 3/4" push-through square and a pin-locking mechanismSturdyvarnished tubular steel constructionwith zinc-plated ratchet head and top-grade plastic partsErgonomically shaped plastic handgrip with calibration aidChange-over between Nm main scale and lbf·ft ancillary scale to avoid reading errors when setting the torque wantedWith micrometre scale for main Nm scale for setting interim valuesRelease system triggers a tactile and audible signalErgonomic system for torque adjustment with reference symbolProvision for rapid setting with hexagon allen keynot includedSecured adjusting/setting system" Technical features:Number of teeth: 48Precision +/-: +/- 3 %vernier Nm: 1 NmNet weight [kg]: 1,4 kgDrive square inch: 1/2Graduation [lbf·ft]: 10 lbf·ftGedore Code-Number: 2641259EAN: 4002805931394
Gedore DMK 400 Torque wrench DREMASTER® K 80-400 Nm Gedore DMK 400 Torque wrench DREMASTER® K 80-400 Nm Features:Use: Controlled screw tightening in the range of 80 - 400 Nm / 60 - 300 lbf·ftAdjustablereleasing and sturdy tubular torque wrench with integrated ratchet and with square drive for industry and the tradesFeatures: Classified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardFor controlled bi-directional tighteningModels DMK: 1/2 mushroom head interchangeable square with push-button releasing and a ball-locking mechanism. From Model No. DMK 400 with 3/4" push-through square and a pin-locking mechanismSturdyvarnished tubular steel constructionwith zinc-plated ratchet head and top-grade plastic partsErgonomically shaped plastic handgrip with calibration aidChange-over between Nm main scale and lbf·ft ancillary scale to avoid reading errors when setting the torque wantedWith micrometre scale for main Nm scale for setting interim valuesRelease system triggers a tactile and audible signalErgonomic system for torque adjustment with reference symbolProvision for rapid setting with hexagon allen keynot includedSecured adjusting/setting system" Technical features:Number of teeth: 36Precision +/-: +/- 3 %vernier Nm: 1 NmReturn angle: 10 °Graduation [lbf·ft]: 10 lbf·ftScale division [Nm]: 10 NmGedore Code-Number: 2641267EAN: 4002805931400
Gedore DMK 550 Torque wrench DREMASTER® K 110-550 Nm Gedore DMK 550 Torque wrench DREMASTER® K 110-550 Nm Features:Use: Controlled screw tightening in the range of 110 - 550 Nm / 80 - 405 lbf·ftAdjustablereleasing and sturdy tubular torque wrench with integrated ratchet and with square drive for industry and the tradesFeatures: Classified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardFor controlled bi-directional tighteningModels DMK: 1/2 mushroom head interchangeable square with push-button releasing and a ball-locking mechanism. From Model No. DMK 400 with 3/4" push-through square and a pin-locking mechanismSturdyvarnished tubular steel constructionwith zinc-plated ratchet head and top-grade plastic partsErgonomically shaped plastic handgrip with calibration aidChange-over between Nm main scale and lbf·ft ancillary scale to avoid reading errors when setting the torque wantedWith micrometre scale for main Nm scale for setting interim valuesRelease system triggers a tactile and audible signalErgonomic system for torque adjustment with reference symbolProvision for rapid setting with hexagon allen keynot includedSecured adjusting/setting system" Technical features:Number of teeth: 36Precision +/-: +/- 3 %vernier Nm: 1 NmReturn angle: 10 °Graduation [lbf·ft]: 10 lbf·ftScale division [Nm]: 10 NmGedore Code-Number: 2641275EAN: 4002805931417
Gedore DMK 750 Torque wrench DREMASTER® K 150-750 Nm Gedore DMK 750 Torque wrench DREMASTER® K 150-750 Nm Features:Use: Controlled screw tightening in the range of 150 - 750 Nm / 110 - 550 lbf·ftAdjustablereleasing and sturdy tubular torque wrench with integrated ratchet and with square drive for industry and the tradesFeatures: Classified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardFor controlled bi-directional tighteningModels DMK: 1/2 mushroom head interchangeable square with push-button releasing and a ball-locking mechanism. From Model No. DMK 400 with 3/4" push-through square and a pin-locking mechanismSturdyvarnished tubular steel constructionwith zinc-plated ratchet head and top-grade plastic partsErgonomically shaped plastic handgrip with calibration aidChange-over between Nm main scale and lbf·ft ancillary scale to avoid reading errors when setting the torque wantedWith micrometre scale for main Nm scale for setting interim valuesRelease system triggers a tactile and audible signalErgonomic system for torque adjustment with reference symbolProvision for rapid setting with hexagon allen keynot includedSecured adjusting/setting system" Technical features:Number of teeth: 36Precision +/-: +/- 3 %vernier Nm: 1 NmTotal length [mm]: 1.230 mmReturn angle: 10 °Graduation [lbf·ft]: 10 lbf·ftGedore Code-Number: 2641283EAN: 4002805931424
Gedore DMK 850 Torque wrench DREMASTER® K 250-850 Nm Gedore DMK 850 Torque wrench DREMASTER® K 250-850 Nm Features:Use: Controlled screw tightening in the range of 250 - 850 Nm / 185 - 630 lbf·ftAdjustablereleasing and sturdy tubular torque wrench with integrated ratchet and with square drive for industry and the tradesFeatures: Classified according to DIN EN ISO 6789-2:2017 Type II Class Aincl. traceable test certificatecalibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standardFor controlled bi-directional tighteningModels DMK: 1/2 mushroom head interchangeable square with push-button releasing and a ball-locking mechanism. From Model No. DMK 400 with 3/4" push-through square and a pin-locking mechanismSturdyvarnished tubular steel constructionwith zinc-plated ratchet head and top-grade plastic partsErgonomically shaped plastic handgrip with calibration aidChange-over between Nm main scale and lbf·ft ancillary scale to avoid reading errors when setting the torque wantedWith micrometre scale for main Nm scale for setting interim valuesRelease system triggers a tactile and audible signalErgonomic system for torque adjustment with reference symbolProvision for rapid setting with hexagon allen keynot includedSecured adjusting/setting system" Technical features:Precision +/-: +/- 3 %vernier Nm: 1 NmTotal length [mm]: 1.375 mmReturn angle: 10 °Graduation [lbf·ft]: 10 lbf·ftScale division [Nm]: 10 NmGedore Code-Number: 2641291EAN: 4002805931431
