Fertan Underbody and Cavity Gun   Features: Large riser tube for waxes completely made of metal. With cavity probe 600 mm and 360° nozzle. Ideal for processing Fertan HT cavity protection wax, UBS 240 underbody protection wax and stone chip protection.   Technical features: Air consuption: 300 l / min Pressure: 2 - 8 bar Inner hose diameter: 10 mm Power: Min. 350 / 100 l (2,2 - 3 kW) Air supply connection: 1/4"

Spray gun for cavity sealing, for usage with standard cans   Features: A problem that occurs at each cavity sealing is that you can not see, whether the preservative reaches all places. Therefore it is more important to use a powerful gun that disperses the material through a 360 ° nozzle. The thicker the material, the more difficult will get its distribution. Using cavity wax , there ultimately remains only the pressure cup method. In this case, the pressure cup projects into a tube which is connected directly to the probe. The beaker is set through a bore from the top pressure, which means that the applied pressure is also applied to the nozzle front. Only through this method will it be possible to create a fine spray nozzle at the front, while using long, thin probes. This gun can also be used for processing by Mike Sanders Anti-corrosion grease.   Scope of Delivery Supplied we deliver a hook probe with handle and a 360 ° probe for cavity protection The probes have 6 mm outer diameter and a length of 1100 mm. The hook probe can also be used for "targeted" processing of underbody protection.

BGS 9406 Plastic Plug Assortment, 58 pcs. Features:BGS 9406 Plastic Plug Assortment, 58 pcs.for closing the following bore sizes:10 plugs Ø 10.0 mm10 plugs Ø 13.4 mm10 plugs Ø 13.5 mm8 plugs Ø 19.4 mm10 plugs Ø 19.5 mm10 plugs Ø 22.2 mmin assortment box Technical features:Gross weight: 140 gPackaging suitable for wall hanging: YesEAN: 4026947094069

Fertan Spray-head for 1 l   Features: Spray-head for 1 l Spray device for self-filling with 2 spray heads Probe diameter only Ø 4,2 mm Weight: 0,22 kg

FLUID FILM Liquid A, 1 liter   One component oily liquid, solvent-free, lanolin based soft coating. 1 liter standard can Viscosity: low (eg. like olive oil) Creep ability: + + + + + Protection: min. 2 years (in closed cavities) Processing: with conventional compressed air systems without heating the material or in the flood method   General usage: This non oxidizing rust retarding compound formulated as a liquid is used to form protective films in ballast tanks on ships, drilling platforms, dry docks, barges, rudder interiors, chain lockers, and any metal surface subjected to severe salt water corrosion and to corrosive marine atmospheres. FLUID FILM Liquid A is easily applied by spray or floatation methods. It forms with water or air humidity a gel which adheres to metal surfaces and is not subject to discharge overboard during deballasting. FLUID FILM Liquid A is also used as a penetrant and lubricant. It may be used to help descale tanks with heavy scale.   Principal characteristics: contains highly polar lanolin and water displacing additives, which deposit the product below water films on the metal surfaces. This is essential for proper penetration and adhesion of the protective coating being applied; does not contain solvents, non toxic during application; requires minimum surface preparation; penetrates existing rust, displaces water, forms with water and/or air humidity a gel; adheres to and gives full protection to wet or dry surfaces; does not dry out, harden or crack; resists water washing yet can easily be removed when required; can be applied by air and airless spraying, brush, roller and floatation. FLUID FILM Liquid A meets and surpasses the requirements of the United States Military Specification MIL-C-16173.   Airless spraying equipment:   Applied by:   Amount of coats   Average film thickness in μm    Theoretical consumption in l/m²   Theoretical spreading rate in m²/l   Nozzle   Brush 1 80 0,08 12 - Roller 1 80 0,08 12 - Airspray 1 170 0,17 6 0,4 Airless 1 170 0,17 6 14 Floatation - 500 - 1500 0,5 - 1,5 2 - 0,7 - *) The film thickness is indicated for rusted steel.