Fertan Spray-head for 1 l   Features: Spray-head for 1 l Spray device for self-filling with 2 spray heads Probe diameter only Ø 4,2 mm Weight: 0,22 kg

FLUID FILM LIQUID NAS 1 liter standard can   FLUID FILM NAS is mainly intended for protection of metal surfaces during internal temporary storage and for preservation during sea and road transport and for cavity sealing of motor vehicles. 1 liter standard can Viscosity: low (e.g. like ketchup) Creep ability: + + + + Protection time: approx. 6 years (in closed cavities) Processing: with commercially available compressed air systems after heating the material to approx. 25°C or with airless systems   Features Solvent-free and physiologically safe for application and as a protective film. Requires minimal surface treatment. Penetrates through rust, displaces water and forms an extremely resistant protection against corrosion by salts. Good adhesion to wet or dry surfaces. No evaporation, resinification or drying of the protective film. Can be easily removed if necessary. Can come into contact with water immediately after application. Processing after slight warming to approx. 25 °C, also possible with a standard pressure cup gun. Particularly suitable as a lubricant and penetrating oil.   Application: Surface preparation: FLUID FILM NAS can be used as a rust remover and at the same time as a corrosion inhibitor. For economic reasons, it is recommended to remove loose contamination such as rust and old coating parts by washing. The surface may be damp, but must be freed from surface water. Mode of operation: For temporary corrosion protection during transport by sea and for intermediate storage under roof. By brush or roller by one-time application, or by spraying with the help of compressed air systems For the preservation of cavities and inaccessible places With a pressure cup gun and a cavity probe, after heating to approx. 25 °C while stirring Airless spraying equipment:   Applied by:   Amount of coats   Average film thickness in μm *)   Theoretical consumption in l/m²   Theoretical spreading rate in m²/l   Nozzle   Brush 1 80 0,08 12 - Roller 1 80 0,08 12 - Airspray 1 170 0,17 6 0,8 - 0,4 Airless 1 170 0,17 6 0,63 - 14   Effect: Extremely resistant to all weather conditions, including snow and slush and the solvent salts used in winter maintenance. Extremely effective and reliable at the same time as a rust remover and water-displacing corrosion inhibitor. Excellent salt water resistance. As corrosion protection of steel parts and other metal parts during transport and processing in the manufacturing plant. Fast creeping, yet well adhering, temperature stable, will not be washed off or altered by rain or seawater, nor will it evaporate and gum up as most penetrating oils do. Bitumen protection layers already on the car chassis floors are plasticized by FLUID FILM and thus activated.  

Fertan Underbody and Cavity Gun   Features: Large riser tube for waxes completely made of metal. With cavity probe 600 mm and 360° nozzle. Ideal for processing Fertan HT cavity protection wax, UBS 240 underbody protection wax and stone chip protection.   Technical features: Air consuption: 300 l / min Pressure: 2 - 8 bar Inner hose diameter: 10 mm Power: Min. 350 / 100 l (2,2 - 3 kW) Air supply connection: 1/4"

Spray gun for cavity sealing, for usage with standard cans   Features: A problem that occurs at each cavity sealing is that you can not see, whether the preservative reaches all places. Therefore it is more important to use a powerful gun that disperses the material through a 360 ° nozzle. The thicker the material, the more difficult will get its distribution. Using cavity wax , there ultimately remains only the pressure cup method. In this case, the pressure cup projects into a tube which is connected directly to the probe. The beaker is set through a bore from the top pressure, which means that the applied pressure is also applied to the nozzle front. Only through this method will it be possible to create a fine spray nozzle at the front, while using long, thin probes. This gun can also be used for processing by Mike Sanders Anti-corrosion grease.   Scope of Delivery Supplied we deliver a hook probe with handle and a 360 ° probe for cavity protection The probes have 6 mm outer diameter and a length of 1100 mm. The hook probe can also be used for "targeted" processing of underbody protection.

BGS 9406 Plastic Plug Assortment, 58 pcs. Features:BGS 9406 Plastic Plug Assortment, 58 pcs.for closing the following bore sizes:10 plugs Ø 10.0 mm10 plugs Ø 13.4 mm10 plugs Ø 13.5 mm8 plugs Ø 19.4 mm10 plugs Ø 19.5 mm10 plugs Ø 22.2 mmin assortment box Technical features:Gross weight: 140 gPackaging suitable for wall hanging: YesEAN: 4026947094069