Kukko Cross-beam internal bushing

Kukko 11-0-206 Spindel G 1" X 400 Mm Mit Buchse Für 11-0 Merkmale:Spindel G 1" X 400 Mm Mit Buchse Für 11-0Gewicht (kg): 3,315

Kukko 3-jaw puller, high performance is guaranteed

Kukko 3-jaw puller, high performance is guaranteed For removing bearings, gears, discs, etc.   Description High performance is guaranteed. Standard pulling hook. Parallel pulling hooks in every position, even with full load. Pulling hooks with infinitely variable adjustment on the cross-beam. Mechanical pressure screw. Milled thread treated with special coating. The three-arm design ensures that the load is distributed evenly and that the part to be removed is held securely. If there is not adequate free space around the part to be removed, we recommend using a 2-jaw puller series 20.   Advantage Variable reach thanks to optional jaw extensions. Turning the pulling hooks enables them to be used both internally and externally. Suitable for pulling asymmetric workpieces. Spindle head band prevents the wrench from slipping off. Almost all components available as replacement parts, time-saving order process thanks to numbering system. Auxiliary hydraulic ram series 9 for particularly tight parts, can be used from a particular puller size. Hydraulic spindle series 8 for particularly tight-fitting parts also available as an option. Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.   Series 11-A Item no. EAN 4021176 Clamping reach outside mm Clamping reach outside inch Clamping depth mm Clamping depth inch Clamping reach inside mm Clamping reach inside inch Hex drive size mm Max. tonne t Max. torque Nm Weight kg 11-0-A 005886 375 14 3/4 200 7 7/8 220 - 500 8 5/8 - 19 3/4 36 15 500 17.99 11-0-A3 729263 375 14 3/4 300 11 7/8 220 - 500 8 5/8 - 19 3/4 36 15 500 19.5 11-0-A4 729348 375 14 3/4 400 15 3/4 220 - 500 8 5/8 - 19 3/4 36 15 500 18.6 11-0-A5 729423 375 14 3/4 500 19 3/4 220 - 500 8 5/8 - 19 3/4 36 15 500 22.78 11-1-A 075421 520 20 1/2 200 7 7/8 280 - 600 11 1/32 - 23 5/8 41 20 650 22.72 11-1-A3 729591 520 20 1/2 300 11 7/8 280 - 600 11 1/32 - 23 5/8 41 20 650 24.34 11-1-A4 729676 520 20 1/2 400 15 3/4 280 - 600 11 1/32 - 23 5/8 41 20 650 28 11-1-A5 729751 520 20 1/2 500 19 3/4 280 - 600 11 1/32 - 23 5/8 41 20 650 27.57 11-2-A 006203 650 25 5/8 200 7 7/8 290 - 740 11 3/8 - 29 1/8 41 20 650 25 11-2-A3 706158 650 25 5/8 300 11 7/8 290 - 740 11 3/8 - 29 1/8 41 20 650 26.25 11-2-A4 729836 650 25 5/8 400 15 3/4 290 - 740 11 3/8 - 29 1/8 41 20 650 26 11-2-A5 729911 650 25 5/8 500 19 3/4 290 - 740 11 3/8 - 29 1/8 41 20 650 27.6

Kukko 3-jaw puller, high performance is guaranteed For removing bearings, gears, discs, etc.   Description High performance is guaranteed. Standard pulling hook. Parallel pulling hooks in every position, even with full load. Pulling hooks with infinitely variable adjustment on the cross-beam. Mechanical pressure screw. Milled thread treated with special coating. The three-arm design ensures that the load is distributed evenly and that the part to be removed is held securely. If there is not adequate free space around the part to be removed, we recommend using a 2-jaw puller series 20.   Advantage Variable reach thanks to optional jaw extensions. Turning the pulling hooks enables them to be used both internally and externally. Suitable for pulling asymmetric workpieces. Spindle head band prevents the wrench from slipping off. Almost all components available as replacement parts, time-saving order process thanks to numbering system. Auxiliary hydraulic ram series 9 for particularly tight parts, can be used from a particular puller size. Hydraulic spindle series 8 for particularly tight-fitting parts also available as an option. Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.   Series 11-A Item no. EAN 4021176 Clamping reach outside mm Clamping reach outside inch Clamping depth mm Clamping depth inch Clamping reach inside mm Clamping reach inside inch Hex drive size mm Max. tonne t Max. torque Nm Weight kg 11-0-A 005886 375 14 3/4 200 7 7/8 220 - 500 8 5/8 - 19 3/4 36 15 500 17.99 11-0-A3 729263 375 14 3/4 300 11 7/8 220 - 500 8 5/8 - 19 3/4 36 15 500 19.5 11-0-A4 729348 375 14 3/4 400 15 3/4 220 - 500 8 5/8 - 19 3/4 36 15 500 18.6 11-0-A5 729423 375 14 3/4 500 19 3/4 220 - 500 8 5/8 - 19 3/4 36 15 500 22.78 11-1-A 075421 520 20 1/2 200 7 7/8 280 - 600 11 1/32 - 23 5/8 41 20 650 22.72 11-1-A3 729591 520 20 1/2 300 11 7/8 280 - 600 11 1/32 - 23 5/8 41 20 650 24.34 11-1-A4 729676 520 20 1/2 400 15 3/4 280 - 600 11 1/32 - 23 5/8 41 20 650 28 11-1-A5 729751 520 20 1/2 500 19 3/4 280 - 600 11 1/32 - 23 5/8 41 20 650 27.57 11-2-A 006203 650 25 5/8 200 7 7/8 290 - 740 11 3/8 - 29 1/8 41 20 650 25 11-2-A3 706158 650 25 5/8 300 11 7/8 290 - 740 11 3/8 - 29 1/8 41 20 650 26.25 11-2-A4 729836 650 25 5/8 400 15 3/4 290 - 740 11 3/8 - 29 1/8 41 20 650 26 11-2-A5 729911 650 25 5/8 500 19 3/4 290 - 740 11 3/8 - 29 1/8 41 20 650 27.6

Kukko 3-jaw puller, high performance is guaranteed For removing bearings, gears, discs, etc.   Description High performance is guaranteed. Standard pulling hook. Parallel pulling hooks in every position, even with full load. Pulling hooks with infinitely variable adjustment on the cross-beam. Mechanical pressure screw. Milled thread treated with special coating. The three-arm design ensures that the load is distributed evenly and that the part to be removed is held securely. If there is not adequate free space around the part to be removed, we recommend using a 2-jaw puller series 20.   Advantage Variable reach thanks to optional jaw extensions. Turning the pulling hooks enables them to be used both internally and externally. Suitable for pulling asymmetric workpieces. Spindle head band prevents the wrench from slipping off. Almost all components available as replacement parts, time-saving order process thanks to numbering system. Auxiliary hydraulic ram series 9 for particularly tight parts, can be used from a particular puller size. Hydraulic spindle series 8 for particularly tight-fitting parts also available as an option. Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.   Series 11-A Item no. EAN 4021176 Clamping reach outside mm Clamping reach outside inch Clamping depth mm Clamping depth inch Clamping reach inside mm Clamping reach inside inch Hex drive size mm Max. tonne t Max. torque Nm Weight kg 11-0-A 005886 375 14 3/4 200 7 7/8 220 - 500 8 5/8 - 19 3/4 36 15 500 17.99 11-0-A3 729263 375 14 3/4 300 11 7/8 220 - 500 8 5/8 - 19 3/4 36 15 500 19.5 11-0-A4 729348 375 14 3/4 400 15 3/4 220 - 500 8 5/8 - 19 3/4 36 15 500 18.6 11-0-A5 729423 375 14 3/4 500 19 3/4 220 - 500 8 5/8 - 19 3/4 36 15 500 22.78 11-1-A 075421 520 20 1/2 200 7 7/8 280 - 600 11 1/32 - 23 5/8 41 20 650 22.72 11-1-A3 729591 520 20 1/2 300 11 7/8 280 - 600 11 1/32 - 23 5/8 41 20 650 24.34 11-1-A4 729676 520 20 1/2 400 15 3/4 280 - 600 11 1/32 - 23 5/8 41 20 650 28 11-1-A5 729751 520 20 1/2 500 19 3/4 280 - 600 11 1/32 - 23 5/8 41 20 650 27.57 11-2-A 006203 650 25 5/8 200 7 7/8 290 - 740 11 3/8 - 29 1/8 41 20 650 25 11-2-A3 706158 650 25 5/8 300 11 7/8 290 - 740 11 3/8 - 29 1/8 41 20 650 26.25 11-2-A4 729836 650 25 5/8 400 15 3/4 290 - 740 11 3/8 - 29 1/8 41 20 650 26 11-2-A5 729911 650 25 5/8 500 19 3/4 290 - 740 11 3/8 - 29 1/8 41 20 650 27.6

Kukko 3-jaw puller with adjustable reach For removing bearings, gears, discs, etc.   Description High performance is guaranteed. Standard pulling hook with adjustable depths. Parallel pulling hooks in every position, even with full load. Pulling hooks with infinitely variable adjustment on the cross-beam. Mechanical pressure screw. Milled thread treated with special coating. The three-arm design ensures that the load is distributed evenly and that the part to be removed is held securely. If there is not adequate free space around the part to be removed, we recommend using a 2-jaw puller series 20.   Advantage   Pulling hooks can be adjusted lengthwise and to meet the required clamping depths. Turning the pulling hooks enables them to be used both internally and externally. Suitable for pulling asymmetric workpieces. Spindle head band prevents the wrench from slipping off. Almost all components available as replacement parts, time-saving order process thanks to numbering system. Hydraulic spindle series 8 for particularly tight-fitting parts also available as an option. Auxiliary hydraulic ram series 9 for particularly tight parts, can be used from a particular puller size. Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.   Kukko quality standards Quality made in Germany. Strong design, high performance and long service life. Self-healing corrosion protection KUKKoating for galvanized parts (WITHOUT chrom VI). Safety label to ensure protection of intellectual property. A tube of KUKKO special grease included for pressure spindle.   Series 11-AV Item no. EAN 4021176 Clamping reach outside mm Clamping reach outside inch Clamping depth mm Clamping depth inch Clamping reach inside mm Clamping reach inside inch Hex drive size mm Max. tonne t Max. torque Nm Weight kg 11-0-AV 730078 375 14 3/4 300 - 500 11 7/8 - 19 3/4 220 - 500 8 5/8 - 19 3/4 36 15 500 23.1 11-1-AV 730153 520 20 1/2 300 - 500 11 7/8 - 19 3/4 280 - 600 11 1/32 - 23 5/8 41 20 650 30.39 11-2-AV 730238 650 25 5/8 300 - 500 11 7/8 - 19 3/4 290 - 740 11 3/8 - 29 1/8 41 20 650 34

Kukko 3-jaw puller with adjustable reach and long hydraulic spindle For pulling particularly tight bearings, gears, discs, etc.   Description High performance is guaranteed. Grease hydraulics. Standard pulling hook. Parallel pulling hooks in every position, even with full load. Pulling hooks with infinitely variable adjustment on the cross-beam. Hydraulic spindle. The three-arm design ensures that the load is distributed evenly and that the part to be removed is held securely. If there is not adequate free space around the part to be removed, we recommend using a 2-jaw puller series 20-B.   Advantage Easy and even pulling for particularly tight parts. Turning the pulling hooks enables them to be used both internally and externally. Suitable for pulling asymmetric workpieces. Almost all components available as replacement parts, time-saving order process thanks to numbering system. Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.   KUKKO quality standards Quality made in Germany. Strong design, high performance and long service life. Self-healing corrosion protection KUKKoating for galvanized parts (WITHOUT chrom VI). Safety label to ensure protection of intellectual property. A tube of KUKKO special grease included for pressure spindle.   Series 11-B Item no. EAN 4021176 Clamping reach outside mm Clamping reach outside inch Clamping depth mm Clamping depth inch Clamping reach inside mm Clamping reach inside inch Max. tonne t Max. torque Nm Weight kg 11-0-B 075346 375 14 3/4 200 7 7/8 220 - 500 8 5/8 - 19 3/4 15 30 22.7 11-1-B 006128 520 20 1/2 200 7 7/8 280 - 600 11 1/32 - 23 5/8 20 45 29.24 11-2-B 006388 650 25 5/8 200 7 7/8 290 - 740 11 3/8 - 29 1/8 20 30 29.5 11-3-B 706073 650 25 5/8 300 11 7/8 290 - 740 11 3/8 - 29 1/8 20 30 32.54

Kukko 3-jaw puller with adjustable reach and long hydraulic spindle For pulling particularly tight bearings, gears, discs, etc.   Description High performance is guaranteed. Grease hydraulics. Standard pulling hook with adjustable depths. Parallel pulling hooks in every position, even with full load. Pulling hooks with infinitely variable adjustment on the cross-beam. Hydraulic spindle. The three-arm design ensures that the load is distributed evenly and that the part to be removed is held securely. If there is not adequate free space around the part to be removed, we recommend using a 2-jaw puller series 20-B.   Advantage Easy and even pulling for particularly tight parts. Pulling hooks can be adjusted lengthwise and to meet the required clamping depths. Turning the pulling hooks enables them to be used both internally and externally. Suitable for pulling asymmetric workpieces. Almost all components available as replacement parts, time-saving order process thanks to numbering system. Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.   Series 11-BV Item no. EAN 4021176 Clamping reach outside mm Clamping reach outside inch Clamping depth mm Clamping depth inch Clamping reach inside mm Clamping reach inside inch Max. tonne t Max. torque Nm Weight kg 11-0-BV 730313 375 14 3/4 300 - 500 11 7/8 - 19 3/4 220 - 500 8 5/8 - 19 3/4 15 45 31.19 11-1-BV 730498 520 20 1/2 300 - 500 11 7/8 - 19 3/4 280 - 600 11 1/32 - 23 5/8 20 30 33.15 11-2-BV 730566 650 25 5/8 300 - 500 11 7/8 - 19 3/4 290 - 740 11 3/8 - 29 1/8 20 30 34.9

Kukko Cross-beam internal bushing

Kukko Cross-beam internal bushing, with spindle

Kukko 3-jaw puller, high performance is guaranteed For removing bearings, gears, discs, etc.   Description High performance is guaranteed. Standard pulling hook. Parallel pulling hooks in every position, even with full load. Pulling hooks with infinitely variable adjustment on the cross-beam. Mechanical pressure screw. Milled thread treated with special coating. The three-arm design ensures that the load is distributed evenly and that the part to be removed is held securely. If there is not adequate free space around the part to be removed, we recommend using a 2-jaw puller series 20.   Advantage Variable reach thanks to optional jaw extensions. Turning the pulling hooks enables them to be used both internally and externally. Suitable for pulling asymmetric workpieces. Spindle head band prevents the wrench from slipping off. Almost all components available as replacement parts, time-saving order process thanks to numbering system. Auxiliary hydraulic ram series 9 for particularly tight parts, can be used from a particular puller size. Hydraulic spindle series 8 for particularly tight-fitting parts also available as an option. Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.   Series 11-A Item no. EAN 4021176 Clamping reach outside mm Clamping reach outside inch Clamping depth mm Clamping depth inch Clamping reach inside mm Clamping reach inside inch Hex drive size mm Max. tonne t Max. torque Nm Weight kg 11-0-A 005886 375 14 3/4 200 7 7/8 220 - 500 8 5/8 - 19 3/4 36 15 500 17.99 11-0-A3 729263 375 14 3/4 300 11 7/8 220 - 500 8 5/8 - 19 3/4 36 15 500 19.5 11-0-A4 729348 375 14 3/4 400 15 3/4 220 - 500 8 5/8 - 19 3/4 36 15 500 18.6 11-0-A5 729423 375 14 3/4 500 19 3/4 220 - 500 8 5/8 - 19 3/4 36 15 500 22.78 11-1-A 075421 520 20 1/2 200 7 7/8 280 - 600 11 1/32 - 23 5/8 41 20 650 22.72 11-1-A3 729591 520 20 1/2 300 11 7/8 280 - 600 11 1/32 - 23 5/8 41 20 650 24.34 11-1-A4 729676 520 20 1/2 400 15 3/4 280 - 600 11 1/32 - 23 5/8 41 20 650 28 11-1-A5 729751 520 20 1/2 500 19 3/4 280 - 600 11 1/32 - 23 5/8 41 20 650 27.57 11-2-A 006203 650 25 5/8 200 7 7/8 290 - 740 11 3/8 - 29 1/8 41 20 650 25 11-2-A3 706158 650 25 5/8 300 11 7/8 290 - 740 11 3/8 - 29 1/8 41 20 650 26.25 11-2-A4 729836 650 25 5/8 400 15 3/4 290 - 740 11 3/8 - 29 1/8 41 20 650 26 11-2-A5 729911 650 25 5/8 500 19 3/4 290 - 740 11 3/8 - 29 1/8 41 20 650 27.6

Kukko 3-jaw puller, high performance is guaranteed For removing bearings, gears, discs, etc.   Description High performance is guaranteed. Standard pulling hook. Parallel pulling hooks in every position, even with full load. Pulling hooks with infinitely variable adjustment on the cross-beam. Mechanical pressure screw. Milled thread treated with special coating. The three-arm design ensures that the load is distributed evenly and that the part to be removed is held securely. If there is not adequate free space around the part to be removed, we recommend using a 2-jaw puller series 20.   Advantage Variable reach thanks to optional jaw extensions. Turning the pulling hooks enables them to be used both internally and externally. Suitable for pulling asymmetric workpieces. Spindle head band prevents the wrench from slipping off. Almost all components available as replacement parts, time-saving order process thanks to numbering system. Auxiliary hydraulic ram series 9 for particularly tight parts, can be used from a particular puller size. Hydraulic spindle series 8 for particularly tight-fitting parts also available as an option. Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.   Series 11-A Item no. EAN 4021176 Clamping reach outside mm Clamping reach outside inch Clamping depth mm Clamping depth inch Clamping reach inside mm Clamping reach inside inch Hex drive size mm Max. tonne t Max. torque Nm Weight kg 11-0-A 005886 375 14 3/4 200 7 7/8 220 - 500 8 5/8 - 19 3/4 36 15 500 17.99 11-0-A3 729263 375 14 3/4 300 11 7/8 220 - 500 8 5/8 - 19 3/4 36 15 500 19.5 11-0-A4 729348 375 14 3/4 400 15 3/4 220 - 500 8 5/8 - 19 3/4 36 15 500 18.6 11-0-A5 729423 375 14 3/4 500 19 3/4 220 - 500 8 5/8 - 19 3/4 36 15 500 22.78 11-1-A 075421 520 20 1/2 200 7 7/8 280 - 600 11 1/32 - 23 5/8 41 20 650 22.72 11-1-A3 729591 520 20 1/2 300 11 7/8 280 - 600 11 1/32 - 23 5/8 41 20 650 24.34 11-1-A4 729676 520 20 1/2 400 15 3/4 280 - 600 11 1/32 - 23 5/8 41 20 650 28 11-1-A5 729751 520 20 1/2 500 19 3/4 280 - 600 11 1/32 - 23 5/8 41 20 650 27.57 11-2-A 006203 650 25 5/8 200 7 7/8 290 - 740 11 3/8 - 29 1/8 41 20 650 25 11-2-A3 706158 650 25 5/8 300 11 7/8 290 - 740 11 3/8 - 29 1/8 41 20 650 26.25 11-2-A4 729836 650 25 5/8 400 15 3/4 290 - 740 11 3/8 - 29 1/8 41 20 650 26 11-2-A5 729911 650 25 5/8 500 19 3/4 290 - 740 11 3/8 - 29 1/8 41 20 650 27.6

Kukko 3-jaw puller, high performance is guaranteed For removing bearings, gears, discs, etc.   Description High performance is guaranteed. Standard pulling hook. Parallel pulling hooks in every position, even with full load. Pulling hooks with infinitely variable adjustment on the cross-beam. Mechanical pressure screw. Milled thread treated with special coating. The three-arm design ensures that the load is distributed evenly and that the part to be removed is held securely. If there is not adequate free space around the part to be removed, we recommend using a 2-jaw puller series 20.   Advantage Variable reach thanks to optional jaw extensions. Turning the pulling hooks enables them to be used both internally and externally. Suitable for pulling asymmetric workpieces. Spindle head band prevents the wrench from slipping off. Almost all components available as replacement parts, time-saving order process thanks to numbering system. Auxiliary hydraulic ram series 9 for particularly tight parts, can be used from a particular puller size. Hydraulic spindle series 8 for particularly tight-fitting parts also available as an option. Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.   Series 11-A Item no. EAN 4021176 Clamping reach outside mm Clamping reach outside inch Clamping depth mm Clamping depth inch Clamping reach inside mm Clamping reach inside inch Hex drive size mm Max. tonne t Max. torque Nm Weight kg 11-0-A 005886 375 14 3/4 200 7 7/8 220 - 500 8 5/8 - 19 3/4 36 15 500 17.99 11-0-A3 729263 375 14 3/4 300 11 7/8 220 - 500 8 5/8 - 19 3/4 36 15 500 19.5 11-0-A4 729348 375 14 3/4 400 15 3/4 220 - 500 8 5/8 - 19 3/4 36 15 500 18.6 11-0-A5 729423 375 14 3/4 500 19 3/4 220 - 500 8 5/8 - 19 3/4 36 15 500 22.78 11-1-A 075421 520 20 1/2 200 7 7/8 280 - 600 11 1/32 - 23 5/8 41 20 650 22.72 11-1-A3 729591 520 20 1/2 300 11 7/8 280 - 600 11 1/32 - 23 5/8 41 20 650 24.34 11-1-A4 729676 520 20 1/2 400 15 3/4 280 - 600 11 1/32 - 23 5/8 41 20 650 28 11-1-A5 729751 520 20 1/2 500 19 3/4 280 - 600 11 1/32 - 23 5/8 41 20 650 27.57 11-2-A 006203 650 25 5/8 200 7 7/8 290 - 740 11 3/8 - 29 1/8 41 20 650 25 11-2-A3 706158 650 25 5/8 300 11 7/8 290 - 740 11 3/8 - 29 1/8 41 20 650 26.25 11-2-A4 729836 650 25 5/8 400 15 3/4 290 - 740 11 3/8 - 29 1/8 41 20 650 26 11-2-A5 729911 650 25 5/8 500 19 3/4 290 - 740 11 3/8 - 29 1/8 41 20 650 27.6

Kukko 3-jaw puller, high performance is guaranteed For removing bearings, gears, discs, etc.   Description High performance is guaranteed. Standard pulling hook. Parallel pulling hooks in every position, even with full load. Pulling hooks with infinitely variable adjustment on the cross-beam. Mechanical pressure screw. Milled thread treated with special coating. The three-arm design ensures that the load is distributed evenly and that the part to be removed is held securely. If there is not adequate free space around the part to be removed, we recommend using a 2-jaw puller series 20.   Advantage Variable reach thanks to optional jaw extensions. Turning the pulling hooks enables them to be used both internally and externally. Suitable for pulling asymmetric workpieces. Spindle head band prevents the wrench from slipping off. Almost all components available as replacement parts, time-saving order process thanks to numbering system. Auxiliary hydraulic ram series 9 for particularly tight parts, can be used from a particular puller size. Hydraulic spindle series 8 for particularly tight-fitting parts also available as an option. Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.   Series 11-A Item no. EAN 4021176 Clamping reach outside mm Clamping reach outside inch Clamping depth mm Clamping depth inch Clamping reach inside mm Clamping reach inside inch Hex drive size mm Max. tonne t Max. torque Nm Weight kg 11-0-A 005886 375 14 3/4 200 7 7/8 220 - 500 8 5/8 - 19 3/4 36 15 500 17.99 11-0-A3 729263 375 14 3/4 300 11 7/8 220 - 500 8 5/8 - 19 3/4 36 15 500 19.5 11-0-A4 729348 375 14 3/4 400 15 3/4 220 - 500 8 5/8 - 19 3/4 36 15 500 18.6 11-0-A5 729423 375 14 3/4 500 19 3/4 220 - 500 8 5/8 - 19 3/4 36 15 500 22.78 11-1-A 075421 520 20 1/2 200 7 7/8 280 - 600 11 1/32 - 23 5/8 41 20 650 22.72 11-1-A3 729591 520 20 1/2 300 11 7/8 280 - 600 11 1/32 - 23 5/8 41 20 650 24.34 11-1-A4 729676 520 20 1/2 400 15 3/4 280 - 600 11 1/32 - 23 5/8 41 20 650 28 11-1-A5 729751 520 20 1/2 500 19 3/4 280 - 600 11 1/32 - 23 5/8 41 20 650 27.57 11-2-A 006203 650 25 5/8 200 7 7/8 290 - 740 11 3/8 - 29 1/8 41 20 650 25 11-2-A3 706158 650 25 5/8 300 11 7/8 290 - 740 11 3/8 - 29 1/8 41 20 650 26.25 11-2-A4 729836 650 25 5/8 400 15 3/4 290 - 740 11 3/8 - 29 1/8 41 20 650 26 11-2-A5 729911 650 25 5/8 500 19 3/4 290 - 740 11 3/8 - 29 1/8 41 20 650 27.6

Kukko 3-jaw puller with adjustable reach For removing bearings, gears, discs, etc.   Description High performance is guaranteed. Standard pulling hook with adjustable depths. Parallel pulling hooks in every position, even with full load. Pulling hooks with infinitely variable adjustment on the cross-beam. Mechanical pressure screw. Milled thread treated with special coating. The three-arm design ensures that the load is distributed evenly and that the part to be removed is held securely. If there is not adequate free space around the part to be removed, we recommend using a 2-jaw puller series 20.   Advantage Pulling hooks can be adjusted lengthwise and to meet the required clamping depths. Turning the pulling hooks enables them to be used both internally and externally. Suitable for pulling asymmetric workpieces. Spindle head band prevents the wrench from slipping off. Almost all components available as replacement parts, time-saving order process thanks to numbering system. Hydraulic spindle series 8 for particularly tight-fitting parts also available as an option. Auxiliary hydraulic ram series 9 for particularly tight parts, can be used from a particular puller size. Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.   Kukko quality standards Quality made in Germany. Strong design, high performance and long service life. Self-healing corrosion protection KUKKoating for galvanized parts (WITHOUT chrom VI). Safety label to ensure protection of intellectual property. A tube of KUKKO special grease included for pressure spindle.   Series 11-AV Item no. EAN 4021176 Clamping reach outside mm Clamping reach outside inch Clamping depth mm Clamping depth inch Clamping reach inside mm Clamping reach inside inch Hex drive size mm Max. tonne t Max. torque Nm Weight kg 11-0-AV 730078 375 14 3/4 300 - 500 11 7/8 - 19 3/4 220 - 500 8 5/8 - 19 3/4 36 15 500 23.1 11-1-AV 730153 520 20 1/2 300 - 500 11 7/8 - 19 3/4 280 - 600 11 1/32 - 23 5/8 41 20 650 30.39 11-2-AV 730238 650 25 5/8 300 - 500 11 7/8 - 19 3/4 290 - 740 11 3/8 - 29 1/8 41 20 650 34

Kukko 3-jaw puller with adjustable reach and long hydraulic spindle For pulling particularly tight bearings, gears, discs, etc.   Description High performance is guaranteed. Grease hydraulics. Standard pulling hook. Parallel pulling hooks in every position, even with full load. Pulling hooks with infinitely variable adjustment on the cross-beam. Hydraulic spindle. The three-arm design ensures that the load is distributed evenly and that the part to be removed is held securely. If there is not adequate free space around the part to be removed, we recommend using a 2-jaw puller series 20-B.   Advantage Easy and even pulling for particularly tight parts. Turning the pulling hooks enables them to be used both internally and externally. Suitable for pulling asymmetric workpieces. Almost all components available as replacement parts, time-saving order process thanks to numbering system. Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.   KUKKO quality standards Quality made in Germany. Strong design, high performance and long service life. Self-healing corrosion protection KUKKoating for galvanized parts (WITHOUT chrom VI). Safety label to ensure protection of intellectual property. A tube of KUKKO special grease included for pressure spindle.   Series 11-B Item no. EAN 4021176 Clamping reach outside mm Clamping reach outside inch Clamping depth mm Clamping depth inch Clamping reach inside mm Clamping reach inside inch Max. tonne t Max. torque Nm Weight kg 11-0-B 075346 375 14 3/4 200 7 7/8 220 - 500 8 5/8 - 19 3/4 15 30 22.7 11-1-B 006128 520 20 1/2 200 7 7/8 280 - 600 11 1/32 - 23 5/8 20 45 29.24 11-2-B 006388 650 25 5/8 200 7 7/8 290 - 740 11 3/8 - 29 1/8 20 30 29.5 11-3-B 706073 650 25 5/8 300 11 7/8 290 - 740 11 3/8 - 29 1/8 20 30 32.54

Kukko 3-jaw puller with adjustable reach and long hydraulic spindle For pulling particularly tight bearings, gears, discs, etc.   Description High performance is guaranteed. Grease hydraulics. Standard pulling hook with adjustable depths. Parallel pulling hooks in every position, even with full load. Pulling hooks with infinitely variable adjustment on the cross-beam. Hydraulic spindle. The three-arm design ensures that the load is distributed evenly and that the part to be removed is held securely. If there is not adequate free space around the part to be removed, we recommend using a 2-jaw puller series 20-B.   Advantage Easy and even pulling for particularly tight parts. Pulling hooks can be adjusted lengthwise and to meet the required clamping depths. Turning the pulling hooks enables them to be used both internally and externally. Suitable for pulling asymmetric workpieces. Almost all components available as replacement parts, time-saving order process thanks to numbering system. Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.   Series 11-BV Item no. EAN 4021176 Clamping reach outside mm Clamping reach outside inch Clamping depth mm Clamping depth inch Clamping reach inside mm Clamping reach inside inch Max. tonne t Max. torque Nm Weight kg 11-0-BV 730313 375 14 3/4 300 - 500 11 7/8 - 19 3/4 220 - 500 8 5/8 - 19 3/4 15 45 31.19 11-1-BV 730498 520 20 1/2 300 - 500 11 7/8 - 19 3/4 280 - 600 11 1/32 - 23 5/8 20 30 33.15 11-2-BV 730566 650 25 5/8 300 - 500 11 7/8 - 19 3/4 290 - 740 11 3/8 - 29 1/8 20 30 34.9

Kukko 3-jaw puller, high performance is guaranteed For removing bearings, gears, discs, etc.   Description High performance is guaranteed. Standard pulling hook. Parallel pulling hooks in every position, even with full load. Pulling hooks with infinitely variable adjustment on the cross-beam. Mechanical pressure screw. Milled thread treated with special coating. The three-arm design ensures that the load is distributed evenly and that the part to be removed is held securely. If there is not adequate free space around the part to be removed, we recommend using a 2-jaw puller series 20.   Advantage Variable reach thanks to optional jaw extensions. Turning the pulling hooks enables them to be used both internally and externally. Suitable for pulling asymmetric workpieces. Spindle head band prevents the wrench from slipping off. Almost all components available as replacement parts, time-saving order process thanks to numbering system. Auxiliary hydraulic ram series 9 for particularly tight parts, can be used from a particular puller size. Hydraulic spindle series 8 for particularly tight-fitting parts also available as an option. Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.   Series 11-A Item no. EAN 4021176 Clamping reach outside mm Clamping reach outside inch Clamping depth mm Clamping depth inch Clamping reach inside mm Clamping reach inside inch Hex drive size mm Max. tonne t Max. torque Nm Weight kg 11-0-A 005886 375 14 3/4 200 7 7/8 220 - 500 8 5/8 - 19 3/4 36 15 500 17.99 11-0-A3 729263 375 14 3/4 300 11 7/8 220 - 500 8 5/8 - 19 3/4 36 15 500 19.5 11-0-A4 729348 375 14 3/4 400 15 3/4 220 - 500 8 5/8 - 19 3/4 36 15 500 18.6 11-0-A5 729423 375 14 3/4 500 19 3/4 220 - 500 8 5/8 - 19 3/4 36 15 500 22.78 11-1-A 075421 520 20 1/2 200 7 7/8 280 - 600 11 1/32 - 23 5/8 41 20 650 22.72 11-1-A3 729591 520 20 1/2 300 11 7/8 280 - 600 11 1/32 - 23 5/8 41 20 650 24.34 11-1-A4 729676 520 20 1/2 400 15 3/4 280 - 600 11 1/32 - 23 5/8 41 20 650 28 11-1-A5 729751 520 20 1/2 500 19 3/4 280 - 600 11 1/32 - 23 5/8 41 20 650 27.57 11-2-A 006203 650 25 5/8 200 7 7/8 290 - 740 11 3/8 - 29 1/8 41 20 650 25 11-2-A3 706158 650 25 5/8 300 11 7/8 290 - 740 11 3/8 - 29 1/8 41 20 650 26.25 11-2-A4 729836 650 25 5/8 400 15 3/4 290 - 740 11 3/8 - 29 1/8 41 20 650 26 11-2-A5 729911 650 25 5/8 500 19 3/4 290 - 740 11 3/8 - 29 1/8 41 20 650 27.6

Kukko 3-jaw puller, high performance is guaranteed For removing bearings, gears, discs, etc.   Description High performance is guaranteed. Standard pulling hook. Parallel pulling hooks in every position, even with full load. Pulling hooks with infinitely variable adjustment on the cross-beam. Mechanical pressure screw. Milled thread treated with special coating. The three-arm design ensures that the load is distributed evenly and that the part to be removed is held securely. If there is not adequate free space around the part to be removed, we recommend using a 2-jaw puller series 20.   Advantage Variable reach thanks to optional jaw extensions. Turning the pulling hooks enables them to be used both internally and externally. Suitable for pulling asymmetric workpieces. Spindle head band prevents the wrench from slipping off. Almost all components available as replacement parts, time-saving order process thanks to numbering system. Auxiliary hydraulic ram series 9 for particularly tight parts, can be used from a particular puller size. Hydraulic spindle series 8 for particularly tight-fitting parts also available as an option. Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.   Series 11-A Item no. EAN 4021176 Clamping reach outside mm Clamping reach outside inch Clamping depth mm Clamping depth inch Clamping reach inside mm Clamping reach inside inch Hex drive size mm Max. tonne t Max. torque Nm Weight kg 11-0-A 005886 375 14 3/4 200 7 7/8 220 - 500 8 5/8 - 19 3/4 36 15 500 17.99 11-0-A3 729263 375 14 3/4 300 11 7/8 220 - 500 8 5/8 - 19 3/4 36 15 500 19.5 11-0-A4 729348 375 14 3/4 400 15 3/4 220 - 500 8 5/8 - 19 3/4 36 15 500 18.6 11-0-A5 729423 375 14 3/4 500 19 3/4 220 - 500 8 5/8 - 19 3/4 36 15 500 22.78 11-1-A 075421 520 20 1/2 200 7 7/8 280 - 600 11 1/32 - 23 5/8 41 20 650 22.72 11-1-A3 729591 520 20 1/2 300 11 7/8 280 - 600 11 1/32 - 23 5/8 41 20 650 24.34 11-1-A4 729676 520 20 1/2 400 15 3/4 280 - 600 11 1/32 - 23 5/8 41 20 650 28 11-1-A5 729751 520 20 1/2 500 19 3/4 280 - 600 11 1/32 - 23 5/8 41 20 650 27.57 11-2-A 006203 650 25 5/8 200 7 7/8 290 - 740 11 3/8 - 29 1/8 41 20 650 25 11-2-A3 706158 650 25 5/8 300 11 7/8 290 - 740 11 3/8 - 29 1/8 41 20 650 26.25 11-2-A4 729836 650 25 5/8 400 15 3/4 290 - 740 11 3/8 - 29 1/8 41 20 650 26 11-2-A5 729911 650 25 5/8 500 19 3/4 290 - 740 11 3/8 - 29 1/8 41 20 650 27.6

Kukko 3-jaw puller, high performance is guaranteed For removing bearings, gears, discs, etc.   Description High performance is guaranteed. Standard pulling hook. Parallel pulling hooks in every position, even with full load. Pulling hooks with infinitely variable adjustment on the cross-beam. Mechanical pressure screw. Milled thread treated with special coating. The three-arm design ensures that the load is distributed evenly and that the part to be removed is held securely. If there is not adequate free space around the part to be removed, we recommend using a 2-jaw puller series 20.   Advantage Variable reach thanks to optional jaw extensions. Turning the pulling hooks enables them to be used both internally and externally. Suitable for pulling asymmetric workpieces. Spindle head band prevents the wrench from slipping off. Almost all components available as replacement parts, time-saving order process thanks to numbering system. Auxiliary hydraulic ram series 9 for particularly tight parts, can be used from a particular puller size. Hydraulic spindle series 8 for particularly tight-fitting parts also available as an option. Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.   Series 11-A Item no. EAN 4021176 Clamping reach outside mm Clamping reach outside inch Clamping depth mm Clamping depth inch Clamping reach inside mm Clamping reach inside inch Hex drive size mm Max. tonne t Max. torque Nm Weight kg 11-0-A 005886 375 14 3/4 200 7 7/8 220 - 500 8 5/8 - 19 3/4 36 15 500 17.99 11-0-A3 729263 375 14 3/4 300 11 7/8 220 - 500 8 5/8 - 19 3/4 36 15 500 19.5 11-0-A4 729348 375 14 3/4 400 15 3/4 220 - 500 8 5/8 - 19 3/4 36 15 500 18.6 11-0-A5 729423 375 14 3/4 500 19 3/4 220 - 500 8 5/8 - 19 3/4 36 15 500 22.78 11-1-A 075421 520 20 1/2 200 7 7/8 280 - 600 11 1/32 - 23 5/8 41 20 650 22.72 11-1-A3 729591 520 20 1/2 300 11 7/8 280 - 600 11 1/32 - 23 5/8 41 20 650 24.34 11-1-A4 729676 520 20 1/2 400 15 3/4 280 - 600 11 1/32 - 23 5/8 41 20 650 28 11-1-A5 729751 520 20 1/2 500 19 3/4 280 - 600 11 1/32 - 23 5/8 41 20 650 27.57 11-2-A 006203 650 25 5/8 200 7 7/8 290 - 740 11 3/8 - 29 1/8 41 20 650 25 11-2-A3 706158 650 25 5/8 300 11 7/8 290 - 740 11 3/8 - 29 1/8 41 20 650 26.25 11-2-A4 729836 650 25 5/8 400 15 3/4 290 - 740 11 3/8 - 29 1/8 41 20 650 26 11-2-A5 729911 650 25 5/8 500 19 3/4 290 - 740 11 3/8 - 29 1/8 41 20 650 27.6

Kukko 3-jaw puller, high performance is guaranteed For removing bearings, gears, discs, etc.   Description High performance is guaranteed. Standard pulling hook. Parallel pulling hooks in every position, even with full load. Pulling hooks with infinitely variable adjustment on the cross-beam. Mechanical pressure screw. Milled thread treated with special coating. The three-arm design ensures that the load is distributed evenly and that the part to be removed is held securely. If there is not adequate free space around the part to be removed, we recommend using a 2-jaw puller series 20.   Advantage Variable reach thanks to optional jaw extensions. Turning the pulling hooks enables them to be used both internally and externally. Suitable for pulling asymmetric workpieces. Spindle head band prevents the wrench from slipping off. Almost all components available as replacement parts, time-saving order process thanks to numbering system. Auxiliary hydraulic ram series 9 for particularly tight parts, can be used from a particular puller size. Hydraulic spindle series 8 for particularly tight-fitting parts also available as an option. Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.   Series 11-A Item no. EAN 4021176 Clamping reach outside mm Clamping reach outside inch Clamping depth mm Clamping depth inch Clamping reach inside mm Clamping reach inside inch Hex drive size mm Max. tonne t Max. torque Nm Weight kg 11-0-A 005886 375 14 3/4 200 7 7/8 220 - 500 8 5/8 - 19 3/4 36 15 500 17.99 11-0-A3 729263 375 14 3/4 300 11 7/8 220 - 500 8 5/8 - 19 3/4 36 15 500 19.5 11-0-A4 729348 375 14 3/4 400 15 3/4 220 - 500 8 5/8 - 19 3/4 36 15 500 18.6 11-0-A5 729423 375 14 3/4 500 19 3/4 220 - 500 8 5/8 - 19 3/4 36 15 500 22.78 11-1-A 075421 520 20 1/2 200 7 7/8 280 - 600 11 1/32 - 23 5/8 41 20 650 22.72 11-1-A3 729591 520 20 1/2 300 11 7/8 280 - 600 11 1/32 - 23 5/8 41 20 650 24.34 11-1-A4 729676 520 20 1/2 400 15 3/4 280 - 600 11 1/32 - 23 5/8 41 20 650 28 11-1-A5 729751 520 20 1/2 500 19 3/4 280 - 600 11 1/32 - 23 5/8 41 20 650 27.57 11-2-A 006203 650 25 5/8 200 7 7/8 290 - 740 11 3/8 - 29 1/8 41 20 650 25 11-2-A3 706158 650 25 5/8 300 11 7/8 290 - 740 11 3/8 - 29 1/8 41 20 650 26.25 11-2-A4 729836 650 25 5/8 400 15 3/4 290 - 740 11 3/8 - 29 1/8 41 20 650 26 11-2-A5 729911 650 25 5/8 500 19 3/4 290 - 740 11 3/8 - 29 1/8 41 20 650 27.6

Kukko 3-jaw puller with adjustable reach For removing bearings, gears, discs, etc.   Description High performance is guaranteed. Standard pulling hook with adjustable depths. Parallel pulling hooks in every position, even with full load. Pulling hooks with infinitely variable adjustment on the cross-beam. Mechanical pressure screw. Milled thread treated with special coating. The three-arm design ensures that the load is distributed evenly and that the part to be removed is held securely. If there is not adequate free space around the part to be removed, we recommend using a 2-jaw puller series 20.   Advantage   Pulling hooks can be adjusted lengthwise and to meet the required clamping depths. Turning the pulling hooks enables them to be used both internally and externally. Suitable for pulling asymmetric workpieces. Spindle head band prevents the wrench from slipping off. Almost all components available as replacement parts, time-saving order process thanks to numbering system. Hydraulic spindle series 8 for particularly tight-fitting parts also available as an option. Auxiliary hydraulic ram series 9 for particularly tight parts, can be used from a particular puller size. Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.   Kukko quality standards Quality made in Germany. Strong design, high performance and long service life. Self-healing corrosion protection KUKKoating for galvanized parts (WITHOUT chrom VI). Safety label to ensure protection of intellectual property. A tube of KUKKO special grease included for pressure spindle.   Series 11-AV Item no. EAN 4021176 Clamping reach outside mm Clamping reach outside inch Clamping depth mm Clamping depth inch Clamping reach inside mm Clamping reach inside inch Hex drive size mm Max. tonne t Max. torque Nm Weight kg 11-0-AV 730078 375 14 3/4 300 - 500 11 7/8 - 19 3/4 220 - 500 8 5/8 - 19 3/4 36 15 500 23.1 11-1-AV 730153 520 20 1/2 300 - 500 11 7/8 - 19 3/4 280 - 600 11 1/32 - 23 5/8 41 20 650 30.39 11-2-AV 730238 650 25 5/8 300 - 500 11 7/8 - 19 3/4 290 - 740 11 3/8 - 29 1/8 41 20 650 34

Kukko 3-jaw puller with adjustable reach and long hydraulic spindle For pulling particularly tight bearings, gears, discs, etc.   Description High performance is guaranteed. Grease hydraulics. Standard pulling hook. Parallel pulling hooks in every position, even with full load. Pulling hooks with infinitely variable adjustment on the cross-beam. Hydraulic spindle. The three-arm design ensures that the load is distributed evenly and that the part to be removed is held securely. If there is not adequate free space around the part to be removed, we recommend using a 2-jaw puller series 20-B.   Advantage Easy and even pulling for particularly tight parts. Turning the pulling hooks enables them to be used both internally and externally. Suitable for pulling asymmetric workpieces. Almost all components available as replacement parts, time-saving order process thanks to numbering system. Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.   KUKKO quality standards Quality made in Germany. Strong design, high performance and long service life. Self-healing corrosion protection KUKKoating for galvanized parts (WITHOUT chrom VI). Safety label to ensure protection of intellectual property. A tube of KUKKO special grease included for pressure spindle.   Series 11-B Item no. EAN 4021176 Clamping reach outside mm Clamping reach outside inch Clamping depth mm Clamping depth inch Clamping reach inside mm Clamping reach inside inch Max. tonne t Max. torque Nm Weight kg 11-0-B 075346 375 14 3/4 200 7 7/8 220 - 500 8 5/8 - 19 3/4 15 30 22.7 11-1-B 006128 520 20 1/2 200 7 7/8 280 - 600 11 1/32 - 23 5/8 20 45 29.24 11-2-B 006388 650 25 5/8 200 7 7/8 290 - 740 11 3/8 - 29 1/8 20 30 29.5 11-3-B 706073 650 25 5/8 300 11 7/8 290 - 740 11 3/8 - 29 1/8 20 30 32.54