Kukko Ball bearing extracting set with counterstay and slide hammer DescriptionUse of the internal extractor in combination with slide hammers or counter stays.The segmented design with extra fine grasp edges ensures safe extraction.Instructions on the cover.Secure storage in special foam.Personal KUKKO-Chip-Code. UseFor extracting inner bearings, bearing outer rings and bushings. AdvantagePractical package for universal use.Thanks to the Kukko modular system, the counterstay and the sliding hammer can be combined and subsequently completed with segmented internal extractors, needle bearing extractors, threaded inserts, etc.Almost all components available as replacement parts, time-saving order process thanks to numbering system.Complete easy-to-manage package. Safety informationNever use an electric- or pneumatic-powered impact/hammer drill for driving a pulling tool.Always wrap the pulling tool and the workpiece in a protective blanket as a precaution against the potential effects of sudden release.Always wear suitable personal protective equipment, including protective goggles.
Kukko Ball bearing extracting set with counterstay and slide hammer DescriptionUse of the internal extractor in combination with slide hammers or counter stays.The segmented design with extra fine grasp edges ensures safe extraction.Instructions on the cover.Secure storage in special foam.Personal KUKKO-Chip-Code. UseFor extracting inner bearings, bearing outer rings and bushings. AdvantagePractical package for universal use.Thanks to the Kukko modular system, the counterstay and the sliding hammer can be combined and subsequently completed with segmented internal extractors, needle bearing extractors, threaded inserts, etc.Almost all components available as replacement parts, time-saving order process thanks to numbering system.Complete easy-to-manage package. Safety informationNever use an electric- or pneumatic-powered impact/hammer drill for driving a pulling tool.Always wrap the pulling tool and the workpiece in a protective blanket as a precaution against the potential effects of sudden release.Always wear suitable personal protective equipment, including protective goggles.
Kukko Ball bearing extracting set with counterstay and slide hammer DescriptionUse of the internal extractor in combination with slide hammers or counter stays.The segmented design with extra fine grasp edges ensures safe extraction.Instructions on the cover.Secure storage in special foam.Personal KUKKO-Chip-Code. UseFor extracting inner bearings, bearing outer rings and bushings. AdvantagePractical package for universal use.Thanks to the Kukko modular system, the counterstay and the sliding hammer can be combined and subsequently completed with segmented internal extractors, needle bearing extractors, threaded inserts, etc.Almost all components available as replacement parts, time-saving order process thanks to numbering system.Complete easy-to-manage package. Safety informationNever use an electric- or pneumatic-powered impact/hammer drill for driving a pulling tool.Always wrap the pulling tool and the workpiece in a protective blanket as a precaution against the potential effects of sudden release.Always wear suitable personal protective equipment, including protective goggles.
Kukko Seal pulling set (radial shaft seal) in case DescriptionInstructions on the cover.Secure storage in special foam. UseFor the extraction of radial shaft seals, oil seals, sealing sleeves, seals, bearing seals and shaft gaskets. AdvantagePractical package for universal use.Almost all components available as replacement parts, time-saving order process thanks to numbering system.Complete easy-to-manage package.KUKKO-L-Boxx-System compatible with systems by all common manufacturers. How it worksA small hole must be punched in the steel jacket of the Simmerring® (gasket) with the awl in order to prevent boring chips. Then drive the self-tapping special screws into the seal ring with the basic device, screw them in, and then knock the seal ring out using the slide hammer.
Kukko K-482 2-jaw Auto-Snap pullers in display package
For removing bearings, gears, discs, etc. for tight or difficult-to-access spaces.
Description
Automatic tensioning and centering of the extractor jaws.
Thanks to the integrated force transmission via the spring mechanism, the clamping force increases in proportion to the pulling force.
Two-arm design for space-saving operation.
Mechanical pressure screw.
Milled thread treated with special coating.
Instructions on the cover.
Secure storage in special foam.
Personal KUKKO-Chip-Code.
Advantage
Powerful − universal − practical.
The elastic effect and slim design enables parts to be pulled in difficult-to-reach places.
Almost all components available as replacement parts, time-saving order process thanks to numbering system.
Complete easy-to-manage package.
Kit in the tried-and-tested KUKKO-i-Boxx-System.
KUKKO quality standards
Quality made in Germany.
Strong design, high performance and long service life.
Self-healing corrosion protection KUKKoating for galvanized parts (WITHOUT chrom VI).
Safety label to ensure protection of intellectual property.
A tube of KUKKO special grease included for pressure spindle.
Item no.
EAN
4021176
Clamping reach
outside
mm
Clamping reach
outside
inch
Clamping depth
mm
Clamping depth
inch
Weight
kg
K-482
123245
150
5 7/8
150
5 7/8
2.44
Kukko Chain splitting and riveting tool
Description
For single strand roller chains per DIN 8187 and a bolt diameter of 3.28 - 5.72 mm.
The frame of the motorcycle (frame, swing arm) often makes it necessary to separate the chain directly on the vehicle. Use of inappropriate
Kukko K-Cube-SF Schubfach F. Cube Mit Auszügen Und Befestigungsmaterial Merkmale:Schubfach F. Cube Mit Auszügen Und BefestigungsmaterialGewicht (kg): 0
Kukko Ball bearing extractors DescriptionPulling hook developed specifically for precise installation in the bearing´s tracks for ideal level of support and better extension force.Ball bearing puller.Pulling hook setsSupport ringsMechanical pressure screw.Milled thread treated with special coating.Instructions and conversion table in the cover.Secure storage in special foam.Personal KUKKO-Chip-Code. UseTo remove grooved ball bearings without causing damage and without having to dismantle the shaft. AdvantageQuick and secure selection thanks to markings on the pulling hooks.Practical package for universal use.Spindle head band prevents the wrench from slipping off.Almost all components available as replacement parts, time-saving order process thanks to numbering system.Complete easy-to-manage package.KUKKO-L-Boxx-System compatible with systems by all common manufacturers. How it works1. Select the ball bearing puller, pulling hook set and support ring that correspond to the ball bearing´s ISO number.2. Insert the pulling hook into the hook holder ring.3. Place the support ring on the shaft.4. Hook the pulling ring onto the outer ring track on the ball bearing.5. Position and attach the ball bearing puller and secure the puller using the sleeve.6. Tightening of the pressure screw and the resulting pressure removes the ball bearing from the shaft. Safety informationDo not use any electrical or pneumatic servo screwdrivers or hammer drills.Protective blanket required.Protective goggles required.
Kukko KUKKO Thread Repair Set DescriptionFully-equipped with drill holder, 4 drills, 4 cutters, 4 thread cutters, 4 insertion tools and organic multi-oil spray.For metric threads M5, M6, M8 and M10.The original insert sleeve from the USA is made from a solid steel bushing manufactured from whole material.Instructions on the cover.Secure storage in special foam. UseFor producing heavy-duty screw joints for distorted interior threading. AdvantageThe shape of the bushing prevents unscrewing.The bond eliminates the need for additional mounting in the workpiece and provides stability without extra space requirement.Also capable of repairing short and small threads.The synchronous threading also enables thin wall thicknesses to be repaired.Thread Repair can do more than just repairs, it can also be used as a fully functional thread in new workpieces (during a production process).No adhesive required for stability.Practical package for universal use.Complete easy-to-manage package.Almost all components available as replacement parts, time-saving order process thanks to numbering system in the cover. How it worksDrill out the old threading.Counter-sink the borehole.Cut the counter thread.Screw in the threaded bushing.Important: Use multi-oil to ensure that the workpiece is well-lubricated during the process.
