Kukko Thread adapter M8 / M18x1,5 DescriptionFor removing parts with centric threaded holes.Use of the threaded inserts in combination with slide hammers or counter supports. AdvantageAlmost all components available as replacement parts, time-saving order process thanks to numbering system.
Kukko Goliath-200 Fahrbarer Abzieher 20 Tonnen M. Montierter Trennvorrichtung M. Satz Y28-256 Ohne Hand- Pumpe Und Zylinder Merkmale:Fahrbarer Abzieher 20 Tonnen M. Montierter Trennvorrichtung M. Satz Y28-256 Ohne Hand- Pumpe Und ZylinderGewicht (kg): 263
Kukko Mobile hydraulic puller GOLIATH"" DescriptionWith a pulling force of up to 50 tonnes, it is ideal for really big pulling jobs.The central pressure spindle of the GOLIATH puller can be attached to the part to be pulled very easily and precisely by just one person thanks to the combination of hydraulic height adjustment and mechanical fine adjustment.The puller can be positioned easily and conveniently using the Y-shaped mobile support frame with four easy-rolling, lockable castors, which also ensures stable placement for all applications.The pulling force is applied by a cylinder ram equipped with a central pressure spindle, which is actuated by a two-stage, electrically-driven hydraulic pump with remote motor control.This avoids exposing users to the risk of injury from flying parts.The protective blanket, which covers the puller during the removal process, offers additional protection.The GOLIATH puller also sets standards with other safety features. For example, a mechanical safety device and additional hydraulic valves allow the puller height to be adjusted and ensure safe operation even under extremely high stress. UseMobile Kukko puller for heavy industry, railways, power plants and other applications where large bearings, gear wheels or similar parts must be dismounted. AdvantageThe puller can be used with 2 or 3 jaws.An accessory separator fixture can be fitted quickly and easily.Modular system can be expanded with other extractor types.Almost all components available as replacement parts, time-saving order process thanks to numbering system.
Kukko Goliath-300 Fahrbarer Abzieher 30 Tonnen M. Montierter Trennvorrichtung M. Satz Y38-356 Ohne Hand- Pumpe Und Zylinder Merkmale:Fahrbarer Abzieher 30 Tonnen M. Montierter Trennvorrichtung M. Satz Y38-356 Ohne Hand- Pumpe Und ZylinderGewicht (kg): 335
Kukko Mobile hydraulic puller GOLIATH"" DescriptionWith a pulling force of up to 50 tonnes, it is ideal for really big pulling jobs.The central pressure spindle of the GOLIATH puller can be attached to the part to be pulled very easily and precisely by just one person thanks to the combination of hydraulic height adjustment and mechanical fine adjustment.The puller can be positioned easily and conveniently using the Y-shaped mobile support frame with four easy-rolling, lockable castors, which also ensures stable placement for all applications.The pulling force is applied by a cylinder ram equipped with a central pressure spindle, which is actuated by a two-stage, electrically-driven hydraulic pump with remote motor control.This avoids exposing users to the risk of injury from flying parts.The protective blanket, which covers the puller during the removal process, offers additional protection.The GOLIATH puller also sets standards with other safety features. For example, a mechanical safety device and additional hydraulic valves allow the puller height to be adjusted and ensure safe operation even under extremely high stress. UseMobile Kukko puller for heavy industry, railways, power plants and other applications where large bearings, gear wheels or similar parts must be dismounted. AdvantageThe puller can be used with 2 or 3 jaws.An accessory separator fixture can be fitted quickly and easily.Modular system can be expanded with other extractor types.Almost all components available as replacement parts, time-saving order process thanks to numbering system.
Kukko Mobile hydraulic separator GOLIATH" and hydraulic puller" DescriptionWith a pulling force of up to 50 tonnes, it is ideal for really big pulling jobs.The central pressure spindle of the GOLIATH puller can be attached to the part to be pulled very easily and precisely by just one person thanks to the combination of hydraulic height adjustment and mechanical fine adjustment.The puller can be positioned easily and conveniently using the Y-shaped mobile support frame with four easy-rolling, lockable castors, which also ensures stable placement for all applications.The pulling force is applied by a cylinder ram equipped with a central pressure spindle, which is actuated by a two-stage, electrically-driven hydraulic pump with remote motor control.This avoids exposing users to the risk of injury from flying parts.The protective blanket, which covers the puller during the removal process, offers additional protection.The GOLIATH puller also sets standards with other safety features. For example, a mechanical safety device and additional hydraulic valves allow the puller height to be adjusted and ensure safe operation even under extremely high stress. UseMobile Kukko puller for heavy industry, railways, power plants, and other applications requiring the removal of large bearings, gear wheels, or similar parts. AdvantageThe model is equipped with a separator, but can also be combined with hydraulic systems.Modular system can be expanded with other extractor types.Almost all components available as replacement parts, time-saving order process thanks to numbering system.
Kukko Mobile hydraulic separator GOLIATH"" DescriptionWith a pulling force of up to 50 tonnes, it is ideal for really big pulling jobs.The central pressure spindle of the GOLIATH puller can be attached to the part to be pulled very easily and precisely by just one person thanks to the combination of hydraulic height adjustment and mechanical fine adjustment.The puller can be positioned easily and conveniently using the Y-shaped mobile support frame with four easy-rolling, lockable castors, which also ensures stable placement for all applications.The pulling force is applied by a cylinder ram equipped with a central pressure spindle, which is actuated by a two-stage, electrically-driven hydraulic pump with remote motor control.This avoids exposing users to the risk of injury from flying parts.The protective blanket, which covers the puller during the removal process, offers additional protection.The GOLIATH puller also sets standards with other safety features. For example, a mechanical safety device and additional hydraulic valves allow the puller height to be adjusted and ensure safe operation even under extremely high stress. UseMobile Kukko puller for heavy industry, railways, power plants, and other applications requiring the removal of large bearings, gear wheels, or similar parts. AdvantageThe model is equipped with a separator, but can also be combined with hydraulic systems.Modular system can be expanded with other extractor types.Almost all components available as replacement parts, time-saving order process thanks to numbering system.
Kukko Mobile hydraulic puller GOLIATH"" DescriptionWith a pulling force of up to 50 tonnes, it is ideal for really big pulling jobs.The central pressure spindle of the GOLIATH puller can be attached to the part to be pulled very easily and precisely by just one person thanks to the combination of hydraulic height adjustment and mechanical fine adjustment.The puller can be positioned easily and conveniently using the Y-shaped mobile support frame with four easy-rolling, lockable castors, which also ensures stable placement for all applications.The pulling force is applied by a cylinder ram equipped with a central pressure spindle, which is actuated by a two-stage, electrically-driven hydraulic pump with remote motor control.This avoids exposing users to the risk of injury from flying parts.The protective blanket, which covers the puller during the removal process, offers additional protection.The GOLIATH puller also sets standards with other safety features. For example, a mechanical safety device and additional hydraulic valves allow the puller height to be adjusted and ensure safe operation even under extremely high stress. UseMobile Kukko puller for heavy industry, railways, power plants and other applications where large bearings, gear wheels or similar parts must be dismounted. AdvantageThe puller can be used with 2 or 3 jaws.An accessory separator fixture can be fitted quickly and easily.Modular system can be expanded with other extractor types.Almost all components available as replacement parts, time-saving order process thanks to numbering system.
Kukko K-20-15 Universal puller set with separator
For removing and separating ball bearings, roller bearings, inner rings and other flush parts.
Description
7 in 1" kit in the tried-and-tested KUKKO-L-Boxx system.
The set facilitates the assembly of seven different puller models through the combination of separators, mechanical and hydraulic spindles, pulling jaws and extensions.
Pulling hook with quick adjusting capability quick adjust.
Jaw extensions.
Parallel pulling hooks in every position, even with full load.
Pulling hooks with infinitely variable adjustment on the cross-beam.
Hydraulic and mechanical pressure screw.
Milled thread treated with special coating.
The sharp blades enable flush parts to be removed where pulling jaws cannot be used.
Includes a pressure pad set for supporting the pressure spindle in a hollow shaft.
Instructions on the cover.
Secure storage in special foam.
Personal KUKKO-Chip-Code.
Advantage
Practical package for universal use.
Easy and even pulling for particularly tight parts.
A manual adjustment knurl allows rapid loosening and adjusting of the extractor jaws on the cross-beam without using a wrench.
Variable reach with jaw extensions.
Optional conversion to various jaw types for mechanical use.
Turning the pulling hooks enables them to be used both internally and externally.
Suitable for pulling asymmetric workpieces.
Cross-beams with hexagonal profile for good grip.
Hydraulic spindle can be used for both cross-beams.
Spindle head band prevents the wrench from slipping off.
Almost all components available as replacement parts, time-saving order process thanks to numbering system.
Complete easy-to-manage package.
KUKKO-L-Boxx-System compatible with systems by all common manufacturers.
Art.No.
EAN
4021176
Spannweite
außen
mm
Spannweite
außen
inch
Spanntiefe
mm
Spanntiefe
inch
Spannweite
innen
mm
Spannweite
innen
inch
Durchmesser
der Welle
mm
Max.
zulässige
Belastung
t
Gewicht
kg
K-20-15
367311
90 - 160
4 - 6 3/8
100 - 300
3 7/8 - 11 7/8
22 - 115
7/8 - 4 1/2
22 - 115
4,5 - 6,0
21.61
Kukko Set of universal 2- and 3-jaw pullers K-2030-10
Description
8 in 1 kit in the tried-and-tested KUKKO-L-Boxx-System.
The set facilitates the assembly of eight different pulling device models through the combination of pulling jaws and extensions.
Flexibility assured thanks to two-arm or three-arm design.
Standard pulling hook.
Jaw extensions.
Parallel pulling hooks in every position, even with full load.
Pulling hooks with infinitely variable adjustment on the cross-beam.
Optimal adjustment of the spindle to the shaft with 2-sided spindle tip (ball and tip).
Short and long mechanical pressure screws.
Milled thread treated with special coating.
If there is adequate free space around the part to be removed, we recommend using a 3-jaw puller.
Instructions on the cover.
Secure storage in special foam.
Personal KUKKO-Chip-Code.
Use
For removing bearings, gears, discs, etc.
Advantage
Practical package for universal use.
Variable reach thanks to optional jaw extensions.
Can be installed on various pulling hooks.
Turning the pulling hooks enables them to be used both internally and externally.
Suitable for pulling asymmetric workpieces.
2-jaw cross-beam with hexagonal profile for good grip.
Spindle head band prevents the wrench from slipping off.
Almost all components available as replacement parts, time-saving order process thanks to numbering system.
Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.
Stability support from optional series 219 clamp.
Complete easy-to-manage package.
KUKKO-L-Boxx-System compatible with systems by all common manufacturers.
How it works
The part due to be removed (e.g. a gear, pulley or ball bearing) is gripped from the outside. Tightening of the pressure screw and the resulting pressure removes the part from the shaft.
The puller must be positioned centrally for centre shafts. If the shaft is not sitting centrally, the parts can be removed asymmetrically with pullers with parallel pulling hooks.
Safety information
The pulling hooks´ sliding parts must always sit stably and fully on the cross-beam.
If several parts have to be removed, always follow a step-by-step process. Do not remove several parts at the same time.
The pulling hooks´ support surfaces must always be straight and sit fully beneath the part to be removed.
Do not use any electrical or pneumatic servo screwdrivers or hammer drills.
Protective blanket required.
Protective goggles required.
Item no.
EAN
4021176
Clamping reach
outside
mm
Clamping reach
outside
inch
Clamping depth
mm
Clamping depth
inch
Clamping reach
inside
mm
Clamping reach
inside
inch
Hex drive size
mm
Max.
tonne
t
Weight
kg
K-2030-10
974748
120; 130
4 3/4; 5 1/8
100 - 350
3 7/8 - 13 3/4
70 - 180
2 3/4 - 7 1/8
17
4,5 - 6,0
9.19
Kukko Set of two- and three-arm pullers with narrow jaws K-2030-10-S
Description
8 in 1 kit in the tried-and-tested KUKKO-L-Boxx-System.
The set facilitates the assembly of eight different pulling device models through the combination of pulling jaws and extensions.
Flexibility assured thanks to two-arm or three-arm design.
Thin pulling hooks.
Jaw extensions.
Parallel pulling hooks in every position, even with full load.
Pulling hooks with infinitely variable adjustment on the cross-beam.
Optimal adjustment of the spindle to the shaft with 2-sided spindle tip (ball and tip).
Short and long mechanical pressure screws.
Milled thread treated with special coating.
If there is adequate free space around the part to be removed, we recommend using a 3-jaw puller.
Instructions on the cover.
Secure storage in special foam.
Personal KUKKO-Chip-Code.
Use
For removing bearings, gears, discs, etc. for tight or difficult-to-access spaces.
Advantage
Practical package for universal use.
Can be installed on various pulling hooks and variable reach thanks to jaw extensions.
Turning the pulling hooks enables them to be used both internally and externally.
Suitable for pulling asymmetric workpieces.
2-jaw cross-beam with hexagonal profile for good grip.
Spindle head band prevents the wrench from slipping off.
Almost all components available as replacement parts, time-saving order process thanks to numbering system.
Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.
Stability support from optional series 219 clamp.
Complete easy-to-manage package.
KUKKO-L-Boxx-System compatible with systems by all common manufacturers.
How it works
The part due to be removed (e.g. a gear, pulley or ball bearing) is gripped from the outside. Tightening of the pressure screw and the resulting pressure removes the part from the shaft.
The puller must be positioned centrally for centre shafts. If the shaft is not sitting centrally, the parts can be removed asymmetrically with pullers with parallel pulling hooks.
Safety information
The pulling hooks´ sliding parts must always sit stably and fully on the cross-beam.
If several parts have to be removed, always follow a step-by-step process. Do not remove several parts at the same time.
The pulling hooks´ support surfaces must always be straight and sit fully beneath the part to be removed.
Do not use any electrical or pneumatic servo screwdrivers or hammer drills.
Protective blanket required.
Protective goggles required.
Item no.
EAN
4021176
Clamping reach
outside
mm
Clamping reach
outside
inch
Clamping depth
mm
Clamping depth
inch
Clamping reach
inside
mm
Clamping reach
inside
inch
Hex drive size
mm
Max.
tonne
t
Weight
kg
K-2030-10-S
306181
120; 130
4 3/4; 5 1/8
100 - 350
3 7/8 - 13 3/4
70 - 180
2 3/4 - 7 1/8
17
3
8.92
Kukko K-2030-10-S-T Set of universal 2- and 3-jaw pullers with extremely narrow jaws
Description
8 in 1 kit in the tried-and-tested KUKKO-L-Boxx-System.
The set facilitates the assembly of eight different pulling device models through the combination of pulling jaws and extensions.
Flexibility assured thanks to two-arm or three-arm design.
Extra-thin trapezoidal pulling hooks.
Jaw extensions.
Parallel pulling hooks in every position, even with full load.
Pulling hooks with infinitely variable adjustment on the cross-beam.
Short and long mechanical pressure screws.
Milled thread treated with special coating.
If there is adequate free space around the part to be removed, we recommend using a 3-jaw puller.
Instructions on the cover.
Secure storage in special foam.
Personal KUKKO-Chip-Code.
Use
For removing gears, bearings, sprockets, synchronizer bodies, etc., in tight or difficult-to-access spaces.
Advantage
Practical package for universal use.
The narrow, trapezoidal pulling jaws are suitable for extremely narrow, difficult to access places.
Variable reach thanks to optional jaw extensions.
Can be installed on various pulling hooks.
Turning the pulling hooks enables them to be used both internally and externally.
Suitable for pulling asymmetric workpieces.
2-jaw cross-beam with hexagonal profile for good grip.
Spindle head band prevents the wrench from slipping off.
Almost all components available as replacement parts, time-saving order process thanks to numbering system.
Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.
Stability support from optional series 219 clamp.
Complete easy-to-manage package.
KUKKO-L-Boxx-System compatible with systems by all common manufacturers.
How it works
The part due to be removed (e.g. a gear, pinion or ball bearing) is gripped from the outside. Tightening of the pressure screw and the resulting pressure removes the part from the shaft.
The puller must be positioned centrally for centre shafts. If the shaft is not sitting centrally, the parts can be removed asymmetrically with pullers with parallel pulling hooks.
Safety information
The pulling hooks´ sliding parts must always sit stably and fully on the cross-beam.
If several parts have to be removed, always follow a step-by-step process. Do not remove several parts at the same time.
The pulling hooks´ support surfaces must always be straight and sit fully beneath the part to be removed.
Do not use any electrical or pneumatic servo screwdrivers or hammer drills.
Protective blanket required.
Protective goggles required.
Item no.
EAN
4021176
Clamping reach
outside
mm
Clamping reach
outside
inch
Clamping depth
mm
Clamping depth
inch
Clamping reach
inside
mm
Clamping reach
inside
inch
Max.
tonne
t
Weight
kg
K-2030-10-S-T
852022
120; 130
4 3/4; 5 1/8
100 - 350
3 7/8 - 13 3/4
70 - 180
2 3/4 - 7 1/8
3
8.805
Kukko Universal 2-jaw and 3-jaw puller set with quick-adjusting pulling jaws
For removing bearings, gears, discs, etc.
Description
8 in 1 kit in the tried-and-tested KUKKO-L-Boxx-System.
The set facilitates the assembly of eight different pulling device models through the combination of pulling jaws and extensions.
Flexibility assured thanks to two-arm or three-arm design.
If there is adequate free space around the part to be removed, we recommend using a 3-jaw puller.
Standard pulling hooks in various lengths with quick adjusting capability quick adjust.
Pulling hooks with infinitely variable adjustment on the cross-beam.
Short and long mechanical pressure screws.
Milled thread treated with special coating.
Parallel pulling hooks in every position, even with full load.
Instructions on the cover.
Personal KUKKO-Chip-Code.
Advantage
Practical package for universal use.
Variable reach thanks to optional jaw extensions.
Turning the pulling hooks enables them to be used both internally and externally.
Suitable for pulling asymmetric workpieces.
2-jaw cross-beam with hexagonal profile for good grip.
Spindle head band prevents the wrench from slipping off.
Almost all components available as replacement parts, time-saving order process thanks to numbering system.
Can be installed on various pulling hooks.
Complete easy-to-manage package.
KUKKO-L-Boxx-System compatible with systems by all common manufacturers.
Item no.
EAN
4021176
Clamping reach
outside
mm
Clamping reach
outside
inch
Clamping depth
mm
Clamping depth
inch
Clamping reach
inside
mm
Clamping reach
inside
inch
Hex drive size
mm
Max.
tonne
t
Weight
kg
K-2030-10+
001697
120; 130
4 3/4; 5 1/8
100 - 350
3 7/8 - 13 3/4
70 - 180
2 3/4 - 7 1/8
17
4,5 - 6,0
9.26
Kukko K-2030-10+S Universal 2-jaw and 3-jaw puller set with narrow, quick-adjusting pulling jaws
Zum Abziehen von Lagern, Zahnrädern, Scheiben etc. für enge und schlecht zugängliche Zwischenräume.
Description
8 in 1 kit in the tried-and-tested KUKKO-L-Boxx-System.
The set facilitates the assembly of eight different pulling device models through the combination of pulling jaws and extensions.
Flexibility assured thanks to two-arm or three-arm design.
Thin pulling jaws in various lengths with quick-adjusting capability.
Jaw extensions.
Parallel pulling hooks in every position, even with full load.
Pulling hooks with infinitely variable adjustment on the cross-beam.
Optimal adjustment of the spindle to the shaft with 2-sided spindle tip (ball and tip).
Short and long mechanical pressure screws.
Milled thread treated with special coating.
If there is adequate free space around the part to be removed, we recommend using a 3-jaw puller.
Instructions on the cover.
Secure storage in special foam.
Personal KUKKO-Chip-Code.
Advantage
Practical package for universal use.
The thin pulling hooks are suitable for narrow, difficult-to-access locations.
A manual adjustment knurl allows rapid loosening and adjusting of the extractor jaws on the cross-beam without using a wrench.
Variable reach thanks to optional jaw extensions.
Can be installed on various pulling hooks.
Turning the pulling hooks enables them to be used both internally and externally.
Suitable for pulling asymmetric workpieces.
2-arm cross bar with hexagonal profile for good grip.
Spindle head band prevents the wrench from slipping off.
Almost all components available as replacement parts, time-saving order process thanks to numbering system.
Note: Pressure pads from series 600-17 are a good addition if the shaft is hollow and the spindle cannot be supported.
Stability support from optional series 219 clamp.
Complete easy-to-manage package.
KUKKO-L-Boxx-System compatible with systems by all common manufacturers.
KUKKO quality standards
Quality made in Germany.
Strong design, high performance, and long service life.
Self-healing corrosion protection KUKKoating for galvanized parts (WITHOUT chrom VI).
Safety label to ensure protection of intellectual property.
Item no.
EAN
4021176
Clamping reach
outside
mm
Clamping reach
outside
inch
Clamping depth
mm
Clamping depth
inch
Clamping reach
inside
mm
Clamping reach
inside
inch
Hex drive size
mm
Max.
tonne
t
Weight
kg
K-2030-10+S
120060
120; 130
4 3/4; 5 1/8
100 - 350
3 7/8 - 13 3/4
70 - 180
2 3/4 - 7 1/8
17
2,5-3
8.5
Kukko Universal 2-jaw and 3-jaw puller set with narrow, quick-adjusting pulling jaws
For removing gears, bearings, sprockets, synchronizer bodies, etc., in tight or difficult-to-access spaces.
Description
8 in 1 kit in the tried-and-tested KUKKO-L-Boxx-System.
The set facilitates the assembly of eight different pulling device models through the combination of pulling jaws and extensions.
Flexibility assured thanks to two-arm or three-arm design.
If there is adequate free space around the part to be removed, we recommend using a 3-jaw puller.
Extra-thin trapezoidal pulling hook with quick adjusting capability quick adjust.
Pulling hooks with infinitely variable adjustment on the cross-beam.
Parallel pulling hooks in every position, even with full load.
Short and long mechanical pressure screws.
Milled thread treated with special coating.
Instructions on the cover.
Secure storage in special foam.
Personal KUKKO-Chip-Code.
Advantage
The narrow, trapezoidal pulling jaws are suitable for extremely narrow, difficult to access places.
Practical package for universal use.
Variable reach thanks to optional jaw extensions.
Turning the pulling hooks enables them to be used both internally and externally.
Suitable for pulling asymmetric workpieces.
2-jaw cross-beam with hexagonal profile for good grip.
Spindle head band prevents the wrench from slipping off.
Almost all components available as replacement parts, time-saving order process thanks to numbering system.
Complete easy-to-manage package.
Can be installed on various pulling hooks.
KUKKO-L-Boxx-System compatible with systems by all common manufacturers.
Item no.
EAN
4021176
Clamping reach
outside
mm
Clamping reach
outside
inch
Clamping depth
mm
Clamping depth
inch
Clamping reach
inside
mm
Clamping reach
inside
inch
Hex drive size
mm
Max.
tonne
t
Weight
kg
K-2030-10+S-T
001710
120; 130
4 3/4; 5 1/8
100 - 350
3 7/8 - 13 3/4
70 - 180
2 3/4 - 7 1/8
17
2,5
8.91
Kukko Set of universal 2- and 3-jaw pullers K-2030-20
Description:
7 in 1" kit in the tried-and-tested KUKKO-L-Boxx system.
The set facilitates the assembly of seven pulling device models through the combination of pulling jaws and extensions.
The rugged construction is particularly suitable for large and heavy applications in industrial and commercial vehicles.
Flexibility assured thanks to two-arm or three-arm design.
Standard pulling hook.
Jaw extensions.
Parallel pulling hooks in every position, even with full load.
Pulling hooks with infinitely variable adjustment on the cross-beam.
Optimal adjustment of the spindle to the shaft with 2-sided spindle tip (ball and tip).
Short and long mechanical pressure screws.
Milled thread treated with special coating.
Includes a pressure pad set for supporting the pressure spindle in a hollow shaft.
If there is adequate free space around the part to be removed, we recommend using a 3-jaw puller.
Instructions on the cover.
Secure storage in special foam.
Personal KUKKO-Chip-Code.
Advantage:
Practical package for universal use.
Variable reach thanks to optional jaw extensions.
Can be installed on various pulling hooks.
Turning the pulling hooks enables them to be used both internally and externally.
Suitable for pulling asymmetric workpieces.
2-arm cross bar with hexagonal profile for good grip.
Spindle head band prevents the wrench from slipping off.
Almost all components available as replacement parts, time-saving order process thanks to numbering system.
Hydraulic series 8-0 spindle, optional for particularly tight-fitting parts.
Complete easy-to-manage package.
KUKKO-L-Boxx-System compatible with systems by all common manufacturers.
Item no.
EAN
4021176
Clamping reach
outside
mm
Clamping reach
outside
inch
Clamping depth
mm
Clamping depth
inch
Clamping reach
inside
mm
Clamping reach
inside
inch
Hex drive size
mm
Max.
tonne
t
Weight
kg
K-2030-20
123252
200
7 7/8
150 - 600
5 7/8 - 23 5/8
100 - 26
3 7/8 - 10 1/4
24
7
14.575
Kukko Universal hydraulic 2-jaw and 3-jaw puller set K-2030-20-B
Description
14 in 1 kit in the tried-and-tested KUKKO-L-Boxx system.
The set facilitates the assembly of 14 pulling device models through the combination of hydraulics, pulling jaws and extensions.
The rugged construction is particularly suitable for large and heavy applications in industrial and commercial vehicles.
Flexibility assured thanks to two-arm or three-arm design.
Standard pulling hook.
Jaw extensions.
Parallel pulling hooks in every position, even with full load.
Pulling hooks with infinitely variable adjustment on the cross-beam.
Long hydraulic spindle
Short and long mechanical pressure screws.
Milled thread treated with special coating.
Includes a pressure pad set for supporting the pressure spindle in a hollow shaft.
If there is adequate free space around the part to be removed, we recommend using a 3-jaw puller.
Instructions on the cover.
Secure storage in special foam.
Personal KUKKO-Chip-Code.
Use
For hydraulic removal of large bearings, gears, discs, etc.
Advantage
Practical package for universal use.
Variable reach thanks to optional jaw extensions.
Optional conversion to various jaw types for mechanical use.
Turning the pulling hooks enables them to be used both internally and externally.
Suitable for pulling asymmetric workpieces.
2-arm cross bar with hexagonal profile for good grip.
Spindle head band prevents the wrench from slipping off.
Almost all components available as replacement parts, time-saving order process thanks to numbering system.
Complete easy-to-manage package.
KUKKO-L-Boxx-System compatible with systems by all common manufacturers.
How it works
The part due to be removed (e.g. a gear, pulley or ball bearing) is gripped from the outside. Tightening of the pressure screw and the resulting pressure removes the part from the shaft.
The puller must be positioned centrally for centre shafts. If the shaft is not sitting centrally, the parts can be removed asymmetrically with pullers with parallel pulling hooks.
Assembly instructions for the hydraulic spindle: 1. Loosen the side screw and unscrew the cap from the spindle body.
2. Screw the spindle body into the cross-beam from below until the spindle body sticks out of the cross-beam by approx. 60 mm.
3. Before use, check whether the pressure spindle is screwed far enough out of the cap so that the hydraulic piston is located in the initial position in the hydraulic cylinder.
4. Operating the upper spindle using the torque wrench will provide the force required for pulling.
5. After completing the removal process, the piston is reset to the initial position by turning the spindle in the opposite direction.
Safety information
The pulling hooks´ sliding parts must always sit stably and fully on the cross-beam.
If several parts have to be removed, always follow a step-by-step process. Do not remove several parts at the same time.
The pulling hooks´ support surfaces must always be straight and sit fully beneath the part to be removed.
Do not use any electrical or pneumatic servo screwdrivers or hammer drills.
Protective blanket required.
Protective goggles required.
Item no.
EAN
4021176
Clamping reach
outside
mm
Clamping reach
outside
inch
Clamping depth
mm
Clamping depth
inch
Clamping reach
inside
mm
Clamping reach
inside
inch
Hex drive size
mm
Max.
tonne
t
Weight
kg
K-2030-20-B
123269
200
7 7/8
150 - 600
5 7/8 - 23 5/8
100 - 260
3 7/8 - 10 1/4
24
6; 7
15.94
Kukko Set of two- and three-arm pullers with narrow jaws K-2030-20-S
Description
7 in 1 kit in the tried-and-tested KUKKO-L-Boxx system.
The set facilitates the assembly of seven pulling device models through the combination of pulling jaws and extensions.
Flexibility assured thanks to two-arm or three-arm design.
Narrow pulling jaws.
Jaw extensions.
Parallel pulling hooks in every position, even with full load.
Pulling hooks with infinitely variable adjustment on the cross-beam.
Optimal adjustment of the spindle to the shaft with 2-sided spindle tip (ball and tip).
Short and long mechanical pressure screws.
Milled thread treated with special coating.
Includes a pressure pad set for supporting the pressure spindle in a hollow shaft.
If there is adequate free space around the part to be removed, we recommend using a 3-jaw puller.
Instructions on the cover.
Secure storage in special foam.
Personal KUKKO-Chip-Code.
Use
For removing large bearings, gears, discs, etc. for tight or difficult-to-access spaces.
Advantage
Practical package for universal use.
The thin pulling hooks are suitable for narrow, difficult-to-access locations.
Variable reach thanks to optional jaw extensions.
Can be installed on various pulling hooks.
Turning the pulling hooks enables them to be used both internally and externally.
Suitable for pulling asymmetric workpieces.
2-arm cross bar with hexagonal profile for good grip.
Spindle head band prevents the wrench from slipping off.
Almost all components available as replacement parts, time-saving order process thanks to numbering system.
Complete easy-to-manage package.
KUKKO-L-Boxx-System compatible with systems by all common manufacturers.
How it works
The part due to be removed (e.g. a gear, pulley or ball bearing) is gripped from the outside. Tightening of the pressure screw and the resulting pressure removes the part from the shaft.
The puller must be positioned centrally for centre shafts. If the shaft is not sitting centrally, the parts can be removed asymmetrically with pullers with parallel pulling hooks.
Safety information
The pulling hooks´ sliding parts must always sit stably and fully on the cross-beam.
If several parts have to be removed, always follow a step-by-step process. Do not remove several parts at the same time.
The pulling hooks´ support surfaces must always be straight and sit fully beneath the part to be removed.
Do not use any electrical or pneumatic servo screwdrivers or hammer drills.
Protective blanket required.
Protective goggles required.
Item no.
EAN
4021176
Clamping reach
outside
mm
Clamping reach
outside
inch
Clamping depth
mm
Clamping depth
inch
Clamping reach
inside
mm
Clamping reach
inside
inch
Hex drive size
mm
Max.
tonne
t
Weight
kg
K-2030-20-S
123276
150 - 600
5 7/8 - 23 5/8
200
7 7/8
100 - 260
3 7/8 - 10 1/4
24
5
14.5
