Proxxon 28660 Angle polisher WP/E
For perfect surfaces even in tight spots: Finishing o f blank surfaces, cleaning, rust removal, for the finishing touches after varnishing.
Features:
Balanced, powerful, quiet and long-lasting special DC motor.
Quiet planetary gear in die-cast aluminium housing and continuously variable speed control (full-wave electronics) for low and constant speeds even during high contact pressure.
Main housing of glass-fibre reinforced POLYAMIDE with soft component.
Securely stored in stylish case made of high-grade polypropylene with original equipment for immediate use.
Rubber backing disc with hook and loop fastening, polishing sponge (medium hard), lambswool polishing disc, polishing felt for metals and non-ferrous metals (medium hard), 12 sanding discs K 2000 and NIGRIN polishing emulsion (75ml) as well as a microfibre cloth
Technische Daten:
220 - 240V.
100W.
800 - 2.500rpm. Length
270mm.
Weight 720g.
Class 2 insulation.
Proxxon 28664 Lambswool polishing disc 2 pcs
Features:
High quality, dense lambswool for polishing scratch-proof paints.
With hook and loop fastening.
Ø 50 mm.
Proxxon 28670 Super-fine sanding discs grain 2000 , 2 pcs
Merkmale:
Silicon carbide discs for adding the finishing touches to paint or removing varnish runs and inclusions.
With hook and loop fastening.
Ø 50 mm.
Proxxon 28680 Random orbital polisher EP/E
The 11mm stroke of the polisher allows for hologram-free polishing on painted and uncoated metal surfaces without heating. Continuously variable speed control and balanced special motor, powerful, quiet and long-lasting. Quiet planetary gear in die-cast aluminium housing. Main housing of glass-fibre reinforced POLYAMIDE with soft component. Highly flexible, 230cm long power cord for mains supply.
Supplied in a storage box of high-grade polypropylene including the selection of accessories for immediate use.
With plenty of accessories such as:
Rubber backing disc with hook and loop fastening, polishing sponge (medium hard), lambswool polishing disc, polishing felt (medium hard), 12 sanding discs K 2000, microfibre cloth and spanner for tool change.
Technical data:
230V. 100W. 800 - 2,800rpm. Eccentric stroke 11mm. Length 270mm. Weight 800g. Insulated to class 2.
PROXXONcolor> 28700 Footswitch FS
Features:
For all machines with a Euro plug (class 2 insulation) and maximum power absorption of 500W
Ideal for both portable and stationary machines
Housing of glass-fibre reinforced NYLON
The connecting cord (230V) is 250cm in length and the output cord 50cm
The transformer is connected to the FS when using 12V machines
PROXXONcolor> 28704 MICROMOT mains adapter NG 5/E
Features:
With superior capacity of 5A
In compact NORYL casing (heat resistant - recommended for transformers)
Variable speed control with feedback effect for optimum tool speed and high torque at low speeds
Three polarised sockets for MICROMOT machines
A pair of sockets for standard banana plugs (4mm diameter) is also supplied
Master switch for turning off the transformer without needing to unplug
Red LED indicates 'ready'
PTC (Positive temperature coefficient) protection against overload:
Plugged in machine will not restart automatically - after cooling down, the mains plug should briefly be unplugged to reset the adapter
With storage holes for tools with 2.35mm and 3mm shafts
Foldable tool rest for the MICROMOT tool
Technical data:
220 - 240 V
Supplies 5.0A at 16 Volt open circuit and 12 Volt under load
Weight 2.000 g
Class 2 insulation
Note:
Power consumption of hand-held power tools is measured according to the internationally accepted ICE-745-1 specification
The current drawn is measured, not the power consumption with a hot motor just before stalling
In practice, this condition seldom appears, if ever
All PROXXON mains adapters are suitably dimensioned for the recommended purposes
The adapters do not include the illustrated mill/drill units!
PROXXONcolor> 28706 MICROMOT mains adapter NG 2/S
Features:
NORYL casing (heat resistant - a necessity for transformer enclosures)
Polarised socket for MICROMOT plug
Red LED indicates readiness for use
PTC (Positive temperature coefficient) element prevents overload (and plugged in tool will not automatically restart). After cooling down the mains plug should be disconnected briefly to reset the adapter
With holes for storing bits Foldable tool rest provides a secure place for keeping the MICROMOT tools at the ready
Technical data:
220 - 240 V
Supplies 2.0A at 16 Volt open circuit and 12 Volt under load
Weight 1.000 g
Class 2 insulation
Note:
Power consumption of hand-held power tools is measured according to the internationally accepted ICE-745-1 specification
The current drawn is measured, not the power consumption with a hot motor just before stalling
In practice, this condition seldom appears, if ever
All PROXXON mains adapters are suitably dimensioned for the recommended purposes
The adapters do not include the illustrated mill/drill units!
PROXXON 28707 MICROMOT mains adapter NG 2/E
Features:
NORYL casing (heat resistant - a necessity for transformer enclosures)
Polarised socket for MICROMOT plug
Red LED indicates readiness for use
PTC (Positive temperature coefficient) element prevents overload (and plugged in tool will not automatically restart). After cooling down the mains plug should be disconnected briefly to reset the adapte After cooling down the mains plug should be disconnected briefly to reset the adapter
With holes for storing bits
Foldable tool rest provides a secure place for keeping the MICROMOT tools at the ready
Variable speed control with feedback effect for adjusting bit speed to suit the job, as well as providing high torque at low speeds
Technical data:
220 - 240 V
Supplies 2.0A at 16 Volt open circuit and 12 Volt under load
Weight 1.000 g
Class 2 insulation
Note:
Power consumption of hand-held power tools is measured according to the internationally accepted ICE-745-1 specification
The current drawn is measured, not the power consumption with a hot motor just before stalling
In practice, this condition seldom appears, if ever
All PROXXON mains adapters are suitably dimensioned for the recommended purposes
The adapters do not include the illustrated mill/drill units!
PROXXONcolor> 28710 Wolfram vanadium steel milling bits, 5 pieces
Features:
5 parts: forms: see picture above
Selected wolfram vanadium steel
Purpose-made stable construction with head and shaft out of a single blank
The precise flutes and optimal concentricity ensure best life expectancy
Ideal for free-hand precision work
For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris
All shafts Ø 2.35 or 3.0mm
Ideal for millling, routing, shaping, profiling and slotting
For clean and powerful fitting of the milling bits we recommend the use of MICROMOT steel collets
PROXXONcolor> 28720 Wolfram vanadium steel milling bits (5,0 mm), 3 pieces
Features:
3 parts: forms: see picture above
Selected wolfram vanadium steel
Purpose-made stable construction with head and shaft out of a single blank
The precise flutes and optimal concentricity ensure best life expectancy
Ideal for free-hand precision work
For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris
All shafts Ø 2.35 or 3.0mm
Ideal for millling, routing, shaping, profiling and slotting
For clean and powerful fitting of the milling bits we recommend the use of MICROMOT steel collets
PROXXONcolor> 28722 Wolfram vanadium steel milling bits (shape: actuator), 3 mm, 2 pieces
Features:
Selected wolfram vanadium steel
Purpose-made stable construction with head and shaft out of a single blank
The precise flutes and optimal concentricity ensure best life expectancy
Ideal for free-hand precision work
For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris
All shafts Ø 2.35 or 3.0mm
Ideal for millling, routing, shaping, profiling and slotting
For clean and powerful fitting of the milling bits we recommend the use of MICROMOT steel collets
PROXXONcolor> Wolfram vanadium steel milling bits (shape: cone ), 4x6 mm, 2 pieces
Features:
Selected wolfram vanadium steel
Purpose-made stable construction with head and shaft out of a single blank
The precise flutes and optimal concentricity ensure best life expectancy
Ideal for free-hand precision work
For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris
All shafts Ø 2.35 or 3.0mm
Ideal for millling, routing, shaping, profiling and slotting
For clean and powerful fitting of the milling bits we recommend the use of MICROMOT steel collets
PROXXONcolor> 28724 Wolfram vanadium steel milling bits (shape: flame), 6 mm, 2 pieces
Features:
Selected wolfram vanadium steel
Purpose-made stable construction with head and shaft out of a single blank
The precise flutes and optimal concentricity ensure best life expectancy
Ideal for free-hand precision work
For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris
All shafts Ø 2.35 or 3.0mm
Ideal for millling, routing, shaping, profiling and slotting
For clean and powerful fitting of the milling bits we recommend the use of MICROMOT steel collets
PROXXONcolor> 28725 Wolfram vanadium steel milling bits (shape: spherical), 6 mm, 2 pieces
Features:
Selected wolfram vanadium steel
Purpose-made stable construction with head and shaft out of a single blank
The precise flutes and optimal concentricity ensure best life expectancy
Ideal for free-hand precision work
For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris
All shafts Ø 2.35 or 3.0mm
Ideal for millling, routing, shaping, profiling and slotting
For clean and powerful fitting of the milling bits we recommend the use of MICROMOT steel collets
PROXXONcolor> 28726 Wolfram vanadium steel milling bits (shape: actuator), 8 mm, 2 pieces
Features:
Selected wolfram vanadium steel
Purpose-made stable construction with head and shaft out of a single blank
The precise flutes and optimal concentricity ensure best life expectancy
Ideal for free-hand precision work
For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris
All shafts Ø 2.35 or 3.0mm
Ideal for millling, routing, shaping, profiling and slotting
For clean and powerful fitting of the milling bits we recommend the use of MICROMOT steel collets
PROXXONcolor> 28727 Wolfram vanadium steel milling bits (shape: disc), 10 mm, 2 pieces
Features:
Selected wolfram vanadium steel
Purpose-made stable construction with head and shaft out of a single blank
The precise flutes and optimal concentricity ensure best life expectancy
Ideal for free-hand precision work
For use on hard and soft woods, non-ferrous and precious metals, as well as plastics and plaster of Paris
All shafts Ø 2.35 or 3.0mm
Ideal for millling, routing, shaping, profiling and slotting
For clean and powerful fitting of the milling bits we recommend the use of MICROMOT steel collets
Proxxon 28730 Circular saw blade made of high-alloy special steel (HSS)
Ø 80mm (10mm bore). 1.1mm thick.
With a high content in tungsten, vanadium and molybdenum for an even structure, high hardness and long service life. Extremely fine-toothed (250teeth). For very fine cuts in non-ferrous metals (aluminium, brass, copper). Also suitable for cutting laminated materials such as circuit boards and for sawing wood and plastics.
PROXXONcolor> 28741 Standard scroll saw blades with pin ends, 10 teeth, 12 pieces
Features:
For cutting soft and hard wood, plastics as well as other soft materials and especially thicker work pieces
Coarse-toothed
10 teeth per 25mm
127 x 2,61 x 0,51 mm
