PROXXONcolor> 28743 Standard scroll saw blades with pin ends, 18 teeth, 12 pieces
Features:
For cutting soft and hard wood, plastics as well as other soft materials and especially thicker work pieces
Normal toothed
18 teeth per 25mm
127 x 1,86 x 0,24 mm
PROXXONcolor> 28745 Standard scroll saw blades with pin ends, 25 teeth, 12 pieces
Features:
For cutting non-ferrous metals, glass-fibre reinforced plastics, plastics, Plexiglas and wood
Fine-toothed
25 teeth per 25mm
127 x 1,76 x 0,25 mm
PROXXON 28747 Spiral blade with plain ends (without pins), 12 pieces
Features:
These blades cut all directions and obviate the turning of the workpiece (advantageous, especially with bigger workpieces)
A 1.5mm hole is required
Ideal for plastic, hard and soft woods
125 x 1,2 mm
PROXXONcolor> 28750 Tungsten carbide millers, 2 pieces
Features:
Shape and size: see the picture above
Made of wear-resistant highly compressed fine-granular tungsten
Used for vibration-free milling of high accuracy dimensions
It is advisable to secure workpieces well, avoiding accidents
For milling steel, cast steel, non-ferrous metals, plastics and extremely hard materials
May be used for technical work, for engraving and milling of PC cards
Shafts Ø 3.0 or 2.35mm
Here also we recommend the use of MICROMOT steel collets
PROXXONcolor> 28752 Tungsten carbide millers, 3 pieces
Features:
Shape and size: see the picture above
Made of wear-resistant highly compressed fine-granular tungsten
Used for vibration-free milling of high accuracy dimensions
It is advisable to secure workpieces well, avoiding accidents
For milling steel, cast steel, non-ferrous metals, plastics and extremely hard materials
May be used for technical work, for engraving and milling of PC cards
Shafts Ø 3.0 or 2.35mm
Here also we recommend the use of MICROMOT steel collets
PROXXONcolor> 28757 Rasp cutter 3,2 mm
Features:
For cutting and milling tiles, stoneware, wood and plastics
Spare cutter for FEX
Shaft Ø 3,2 mm
Length: 50 mm
Cutter dimensions: 3,2 x 22 mm
PROXXONcolor> 28758 Tungsten carbide millers, 1 mm
Features:
Made of wear-resistant highly compressed fine-granular tungsten
Used for vibration-free milling of high accuracy dimensions
It is advisable to secure workpieces well, avoiding accidents
For
milling steel, cast steel, non-ferrous metals, plastics and extremely hard materials
May be used for technical work, for engraving and milling of PC cards
Shafts Ø 3.0
Here also we recommend the use of MICROMOT steel collets
PROXXONcolor> 28759 Tungsten carbide millers, 2 mm
Features:
Made of wear-resistant highly compressed fine-granular tungsten
Used for vibration-free milling of high accuracy dimensions
It is advisable to secure workpieces well, avoiding accidents
For milling steel, cast steel, non-ferrous metals, plastics and extremely hard materials
May be used for technical work, for engraving and milling of PC cards
Shafts Ø 3.0
Here also we recommend the use of MICROMOT steel collets
PROXXONcolor> 28760 Tungsten carbide millers (shape: sperical), 5 mm
Features:
Made of wear-resistant highly compressed fine-granular tungsten
Used for vibration-free milling of high accuracy dimensions
It is advisable to secure workpieces well, avoiding accidents
For milling steel, cast steel, non-ferrous metals, plastics and extremely hard materials
May be used for technical work, for engraving and milling of PC cards
Shafts Ø 2.35mm
Here also we recommend the use of MICROMOT steel collets
PROXXONcolor> 28761 Tungsten carbide millers, 3 mm
Features:
Made of wear-resistant highly compressed fine-granular tungsten
Used for vibration-free milling of high accuracy dimensions
It is advisable to secure workpieces well, avoiding accidents
For milling steel, cast steel, non-ferrous metals, plastics and extremely hard materials
May be used for technical work, for engraving and milling of PC cards
Shafts Ø 3.0
Here also we recommend the use of MICROMOT steel collets
PROXXONcolor> 28772 High quality corundum grinding bits (shape: spherical), 5 mm, 5 pieces
Features:
Bits and sets of fine, high quality materials of consistent hardness
Various shapes for the widest possible range of applications
For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel
Accurately dimensioned shafts of Ø 2.35 or 3.0mm ensure maximum concentricity
Grinding rule: soft materials = hard grinding bits; hard materials = soft grinding bits!
PROXXONcolor> 28774 High quality corundum grinding bits (shape: actuator), 2,5 mm, 5 pieces
Features:
Bits and sets of fine, high quality materials of consistent hardness
Various shapes for the widest possible range of applications
For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel
Accurately dimensioned shafts of Ø 2.35 or 3.0mm ensure maximum concentricity
Grinding rule: soft materials = hard grinding bits; hard materials = soft grinding bits!
PROXXONcolor> 28776 High quality corundum grinding bits (shape: gear), 6 mm, 5 pieces
Features:
Bits and sets of fine, high quality materials of consistent hardness
Various shapes for the widest possible range of applications
For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel
Accurately dimensioned shafts of Ø 2.35 or 3.0mm ensure maximum concentricity
Grinding rule: soft materials = hard grinding bits; hard materials = soft grinding bits!
PROXXONcolor> 28778 High quality corundum grinding bits (shape: cone), 7 mm, 5 pieces
Features:
Bits and sets of fine, high quality materials of consistent hardness
Various shapes for the widest possible range of applications
For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel
Accurately dimensioned shafts of Ø 2.35 or 3.0mm ensure maximum concentricity
Grinding rule: soft materials = hard grinding bits; hard materials = soft grinding bits!
PROXXONcolor> 28781 High quality corundum grinding bits (shape: actuator), 8 mm, 3 pieces
Features:
Bits and sets of fine, high quality materials of consistent hardness
Various shapes for the widest possible range of applications
For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel
Accurately dimensioned shafts of Ø 2.35 or 3.0mm ensure maximum concentricity
Grinding rule: soft materials = hard grinding bits; hard materials = soft grinding bits!
PROXXONcolor> 28782 High quality corundum grinding bits (shape: spherical), 9 mm, 3 pieces
Features:
Bits and sets of fine, high quality materials of consistent hardness
Various shapes for the widest possible range of applications
For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel
Accurately dimensioned shafts of Ø 2.35 or 3.0mm ensure maximum concentricity
Grinding rule: soft materials = hard grinding bits; hard materials = soft grinding bits!
PROXXONcolor> 28783 High quality corundum grinding bits (shape: gear), 13 mm, 3 pieces
Features:
Bits and sets of fine, high quality materials of consistent hardness
Various shapes for the widest possible range of applications
For grinding and chiselling hard materials such as cast iron, cast steel, malleable cast iron as well as hard metal alloys and refined steel
Accurately dimensioned shafts of Ø 2.35 or 3.0mm ensure maximum concentricity
Grinding rule: soft materials = hard grinding bits; hard materials = soft grinding bits!
PROXXONcolor> 28798 Felt Discs (22 mm), 10 pieces + 1 Arbor
Features:
For preliminary and high burnish polishing of metal, gold, silver, brass and aluminium with the use of polishing paste
Also for final polishing in mould and die-making
Shaft Ø 2.35
Work with a lower rotational speed when polishing
Soften hard polishing paste with oil or heat up lightly
PROXXONcolor> 28801 Felt polishers (shape: bullet) (8 x 15 mm), 2 pieces
Features:
For preliminary and high burnish polishing of metal, gold, silver, brass and aluminium with the use of polishing paste
Also for final polishing in mould and die-making
Shaft Ø 2.35
Work with a lower rotational speed when polishing
Soften hard polishing paste with oil or heat up lightly
PROXXONcolor> 28802 Felt polishers (shape: actuator) (7 x 15 mm), 2 pieces
Features:
For preliminary and high burnish polishing of metal, gold, silver, brass and aluminium with the use of polishing paste
Also for final polishing in mould and die-making
Shaft Ø 2.35
Work with a lower rotational speed when polishing
Soften hard polishing paste with oil or heat up lightly
PROXXONcolor> 28803 Felt polishers (shape: wheel) (3 x 16mm), 2 pieces
Features:
For preliminary and high burnish polishing of metal, gold, silver, brass and aluminium with the use of polishing paste
Also for final polishing in mould and die-making
Shaft Ø 2.35
Work with a lower rotational speed when polishing
Soften hard polishing paste with oil or heat up lightly
PROXXONcolor> 28808 Aluminium oxide cutting discs with reinforcement (22 mm), 10 pieces + 1 Arbor
Features:
The cutting discs are available in Ø 22 x 0.8mm and Ø 38 x 1.0mm
Nearly unbreakable, making them usable to remove stock
Will cut alloyed, standard and stainless steels, non-ferrous metals and even wood and plastic
Arbor shaft of Ø 2.35mm
PROXXONcolor> 28809 Aluminium oxide cutting discs with reinforcement (22 mm), 50 pieces + 1 Arbor
Features:
The cutting discs are available in Ø 22 x 0.8mm and Ø 38 x 1.0mm
Nearly unbreakable, making them usable to remove stock
Will cut alloyed, standard and stainless steels, non-ferrous metals and even wood and plastic
Arbor shaft of Ø 2.35mm
PROXXONcolor> 28810 Corundum cutting discs (22 mm), 10 pieces + 1 Arbor
Features:
Discs made of a special compound of diameter 22 x 0.7mm
Used to part alloys and metals, stainless steels and nonferrous metals
Can also be used for cutting wood and plastic
Shaft of Ø 2.35mm
