PROXXONcolor> 28295 Flexible polishing pad set (14 x 12 mm), 2 pieces
Features:
Especially suitable for working gold, platinum, silver as well as for tool making and castings
Shafts of Ø 2.35mm
PROXXONcolor> 28297 Cotton polishers (22 mm), 2 pieces
Features:
For high burnish polishing of metal, gold, silver, non-ferrous metals, brass, aluminium, ceramics and porcelain with the use of polishing paste
Also for reconditioning painted woods and plastics
Shaft Ø 2.35
PROXXONcolor> 28298 Chamois polishers (22 mm), 2 pieces
Features:
For high burnish polishing of metal, gold, silver, non-ferrous metals, brass, aluminium, ceramics and porcelain with the use of polishing paste
Also for reconditioning painted woods and plastics
Shaft Ø 2.35
PROXXONcolor> 28299 Felt polishers (22 mm), 2 pieces
Features:
For high burnish polishing of metal, gold, silver, non-ferrous metals, brass, aluminium, ceramics and porcelain with the use of polishing paste
Also for reconditioning painted woods and plastics
Shaft Ø 2.35
PROXXONcolor> 28302 High quality corundum grinding wheel (22 mm), 10 pieces + 1 Arbor
Features:
Wheels for free-hand and stationary grinding, sharpening, de-burring and smoothening of various metals and materials
10 Grinding wheels: 22 x 3 mm
+ 1 Shaft: 2,35 mm
PROXXONcolor> 28304 High quality silicon carbide grinding wheel (22 mm), 10 pieces + 1 Arbor
Features:
Wheels for free-hand and stationary grinding, sharpening, de-burring and smoothening of various metals and materials
10 Grinding wheels: 22 x 3 mm
+ 1 Shaft: 2,35 mm
PROXXONcolor> 28310 Spare discs for the SP/E and BSG 220 (50 x 13mm), Silicon carbide
Features:
Silicon carbide
with 12.7mm bore
Soft compound for very hard materials.
PROXXONcolor> 28312 Polishing set for the SP/E, 5 pieces
Features:
Steel wire brush for de-rusting and cleaning steel and non-ferrous metals
Brass wire brush to polish non-ferrous metals and precious metals
Felt wheel is used on painted surfaces and the chamois and cotton wheels provide a high gloss finish on non-ferrous metals and precious metals
PROXXONcolor> 28410 MICROMOT tool holder
Features:
For stationary use of MICROMOT electrical precision
tools with metal head in combination with a vise.For stationary use of MICROMOT electrical precision
tools with metal head in combination with a vise.
Especially suited for industrial drill/grinder IBS/E,
belt sander BS/E, longneck angle grinder
LHW, super jig saw STS/E and delta sander
OZI/E. Made of glass-fibre reinforced POLYAMIDE.Especially suited for industrial drill/grinder IBS/E,
belt sander BS/E, longneck angle grinder
LHW, super jig saw STS/E and delta sander
OZI/E. Made of glass-fibre reinforced POLYAMIDE.
Proxxon 28430 MICROMOT 230/E with 34 industrial quality bits and cutters
With a diameter of only 37mm and a weight of just 270g it offers convenient handling second to none in its class! Balanced DC special motor. Quiet and extremely long-lasting. Electronic speed control for speeds from 6,000 to 22,000rpm. Ground, ball-bearing spindle. High quality MICROMOT steel collets: Even the smallest shafts are accurately clamped. No rattling or vibrating of bits and cutters. Spindle for tool exchange can be locked at the push of a button. 20mm standard collar for use with MICROMOT drill stands and horizontal stands.
Including 34 industrial quality bits and cutters, 6 MICROMOT steel collets (1 each of 1 - 1.5 - 2 - 2.4 - 3 and 3.2mm). Everything finds its place in the attractive plastic case.
Technical data:
230V. 60W. 6.000 - 22.000rpm. Weight 270g. Insulated to class 2.
Proxxon 28440 Micromot 230/E
For drilling, milling, grinding, polishing, brushing, cutting and engraving. The extremely slim housing of glass-fibre reinforced POLYAMIDE with a soft component grip area enables the unit to be handled with two fingers (pen grip).
Features:
Balanced, low noise special DC motor with high life expectancy.
The maximum speed of 21,500rpm can be continuously reduced to 6,500rpm through full-wave electronics.
Offering nearly the same torque also in the lower speed range.
This is especially important for micro drilling, brushing and polishing. Ground, ball-bearing spindle.
High quality MICROMOT steel collets: Even the smallest shafts are accurately clamped.
No rattling or vibrating of bits and cutters.
Spindle for tool exchange can be locked at the push of a button. 20mm collar for use in MICROMOT drill stands and horizontal stands.
Includes MICROMOT steel collets (1 each of 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2mm).
Technical Data:
220 - 240 V. 50 Hz. 80 W. 6.500 - 21.500/min. Weight 270 g. Class 2 insulation.
Note:
MICROMOT steel collets are hardened and thus have a high, consistent flexibility. They also maintain prolonged accuracy, even after regular use (not to be compared with unhardened, 4-slit collets and those made of brass or aluminium). The triple slit collet, which is much more difficult to produce than the 4-slit type, offers a much better load-bearing surface. This is especially important for the centrical clamping of cutters with small shaft diameters.
PROXXON 28462 Precision drill/grinder FBS 12/EF
Features:
For precision drilling, milling, sanding, polishing, brushing, de-rusting, engraving, chiselling and cutting
Includes keyless chuck (capacity 0.3 - 3.2mm)
A precision ball bearing minimises spindle side play
Spindle lock button for bit changing obviates the need for spanners
Recessed spindle head for inserting MICROMOT steel collets
Special, balanced, low noise DC motor with high life expectancy
Variable speed control with feedback effect (high engine power in the lower revolutions area)
Housing of glass-fibre reinforced POLYAMIDE
Technical data:
Direct voltage 12 - 18V
Maximum power consumption 100W
Stroke 3,000 - 15,000rpm
Length 185mm
Weight 450g
We recommend the use of MICROMOT mains adapters of at least 2.0 A
PROXXON 28472 Precision drill/grinder FBS 240/E
Features:
For milling, drilling, grinding, polishing, cleaning, carving and engraving
The maximum speed of 20,000rpm is continuously variable down to 5000 rpm
The full wave electronic speed control results in virtually constant torque, even at lower speeds, in turn facilitating micro drilling, cleaning and polishing
The spindle runs in a precision ball bearing and is lifted with a lock button
The 20mm collar fits MICROMOT drill stands and vices
Fitted with a special, balanced low noise DC motor with high life expectancy
Stable housing of glass-fibre reinforced POLYAMIDE with soft components in the finger grip area
Supplied complete with 43 quality bits and cutters in a sturdy plastic case
Technical data:
5,000 - 20,000 rpm
Maximum power consumption 100 W, 220 - 240 V
Length 200 mm
Weight 450 g
Insulated to class 2 requirements
Keyless chuck 0.3 - 3.2 mm capacity
PROXXON 28481 Professional drill/grinder IBS/E
Features:
For drilling, milling, grinding, polishing, cleaning, cutting, carving, engraving and signing
Ideal for precision mechanics, model builders, jewellers, opticians, artists and electronic enthusiasts
High concentric accuracy (max. runout 3/100mm)
This high-revving, special, balanced low noise DC motor has full-wave electronic speed control
The ground steel spindle runs in a ball bearing
Six high concentricity MICROMOT collets:
1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2mm and closure nut are included
Technical data:
Speed 5,000 - 20,000rpm
Power consumption max. 100W
220 - 240V
Stable head of die-cast aluminium and main housing of glass-fibre reinforced POLYAMIDE Length 230mm
Weight approx. 500g
Insulated to class 2
The 20mm MICROMOT collar allows fitting of optional drill stands, horizontal stands, etc.
Supplied with 34 bits and cutters in a stable plastic case
PROXXON 28485 Long neck straight drill/grinder LBS/E
Features:
Head of die-cast aluminium with 100mm long spindle neck (and 20mm MICROMOT collar)
Ideal for internal grinding and the use in slots and channels
Special, balanced, powerful, quiet and long-lasting DC motor
Variable (full wave) electronic speed control
Main housing of glass-fibre reinforced POLYAMIDE
The ground steel spindle runs in a ball bearing, minimising play
MICROMOT collets (1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2mm)
Safely stored in an attractive and extremely stable case made from high-grade polyproylene
Technical data:
220 - 240 V
100 W
5,000 - 20,000/min
Length 300mm
Weight 630g
Insulated to class 2
PROXXONcolor> 28492 Long neck milling/drilling unit LWB/E
Features:
With a set of gears running on several ball bearings in a stable, die-cast aluminium housing head
Also suitable for right-angled separation of rodsWith a special balanced, powerful, quiet and long-lasting DC motor
Infinitely variable rpm (full wave electronics) Main housing is made of glass-fibre reinforcedPOLYAMID
With MICROMOT hardened steel collets (1,0 - 1,5 - 2,0 - 2,4 - 3,0 and 3,2 mm)
Safetly stored in an attractive and extremely stables case made from high-grade polypropylene
Technical data:
Voltage: 220 - 240 V
Power consumption: 100 W
Rotation speed: 3.000 - 15.000/min
Length 270 mm
Weight 550 g
Insulated to class 2
PROXXON 28500 Mill/drill unit MICROMOT 60
Features:
With a diameter of only 35mm it is unsurpassed easy to manage. Besides the weight of only approx. 230g, the effortless drive via balanced motor with ground spindle and collar bearing allows for quiet run with a pleasing sound to the ear.
The high-quality MICROMOT steel collets ensure accurate clamping of the cutters, without rattling or vibrating of bits and cutters
The size of the machine dictates a 12V drive system, use of a mains adapter of at least 1.0A is thus required
We recommend MICROMOT mains adapters NG 2/S, NG 2/E or NG 5/E
High precision:
Due to ball bearing spindle
Special balanced, low noise DC motor with high life expectancy
Variable electronic speed control with feedback effect (high engine power also at lower speeds)
Housing of glass-fibre reinforced POLYAMIDE with soft component in the finger grip area
20mm-collar for fitting MICROMOT accessories
Six MICROMOT steel collets: One each of 1,0 - 1,5 - 2,0 - 2,4 - 3,0 and 3,2 mm are included
Technical features:
Direct voltage 12 -18V
Power consumption max. 40W
Stroke speed 20,000rpm
Length 220mm
Weight 230g
PROXXON 28510 Mill/drill unit MICROMOT 60/E
Features:
With a diameter of only 35mm it is unsurpassed easy to manage. Besides the weight of only approx. 230g, the effortless drive via balanced motor with ground spindle and collar bearing allows for quiet run with a pleasing sound to the ear.
The high-quality MICROMOT steel collets ensure accurate clamping of the cutters, without rattling or vibrating of bits and cutters.
The size of the machine dictates a 12V drive system, use of a mains adapter of at least 1.0A is thus required.
We recommend MICROMOT mains adapters NG 2/S, NG 2/E or NG 5/E.
High precision:
Due to ball bearing spindle
Special balanced, low noise DC motor with high life expectancy
Variable electronic speed control with feedback effect (high engine power also at lower speeds)
Housing of glass-fibre reinforced POLYAMIDE with soft component in the finger grip area
20 mm-collar for fitting MICROMOT accessories
Six MICROMOT steel collets: one each of 1,0 - 1,5 - 2,0 - 2,4 - 3,0 and 3,2 mm are included
Technical data:
Direct voltage 12 - 18V
Power consumption max. 40W
Stroke speed 5,000 - 20,000rpm
Length 220mm
Weight 230g
PROXXON 28512 MICROMOT 60/EF
Features:
Slim, easily handled and ligh
Quick-action chuck and electronic revolutions adjustment, with feedback effect (high engine power in the lower revolutions area)
Special, balanced, low noise DC motor with high life expectancy
A transformerof at least 1.0A is required for operation
We recommend MICROMOT mains adapters NG 2/S, NG 2/E or NG 5/E
Technical data:
Direct voltage 12 - 18V
Power absorption 40W
Stroke speed 5,000 - 20,000rpm
Length 220mm
Weight 230g
Note:
The MICROMOT 50/EF can also be fitted with MICROMOT steel collets
This is recommended when milling continuously at high lateral pressure
This makes it impossible for the shafts to become loosened after prolonged working
Using collets makes true running better than using the quick-action chuck
PROXXON 28515 Model building and engraving set with mill/drill unit MICROMOT 60/E
Features:
The tens of thousands of these units in use speak for themselves: they are a joy to use!
The diameter of only 35mm makes it easy to handle
The weight of 230g, quietness and effortless drive via the balanced motor with ground spindle and collar bearing all contribute to the ergonomic design
The high-quality MICROMOT steel collets ensure accurate clamping of the cutters, without thumping of bits and cutters
Technical data:
Direct voltage 12 - 18V
Power consumption max. 40W
Stroke speed 5,000 - 20,000rpm
Length 220mm
Weight 230g
Content of the Pack:
The set includes a mains adapter and 34 industrial quality respectively dental quality bits and cutters:
1 diamond grinding bit
1 fine miller
0.5 and 1.0mm micro-drills
1 brass brush
4 high-grade corundum grinding bits (cylinder, sphere, disc and cone shaped)
1 saw blade
4 grinding wheels (2 corundum, 2 silicon carbide)
20 cutting discs and 1 arbor
The 6 MICROMOT collets ranging from 1.0 - 3.2mm are also included
With mains adapter for 220 - 240V operation (12V, 1.0A)
PROXXONcolor> 28520 Delta sander OZI/ESmall yet efficient sander!
Features:
For grinding surfaces in very tight spots,. e. g. corners, sides and inaccessibleThe oscillating motion ensures quiet operation and also facilitates cutting. The oscillating motion ensures quiet operation and also facilitates cutting
The variable speed facility ensures the correct speed for every material Special, balanced, low noise DC motor with high life expectancy
Main housing of glass-fibre reinforced POLYAMIDE Complete with 4 sanding discs:
2 x 80 grit, je 1 x 150 grit und 240 grit
In an attractive case
Technical data:
Voltage: 220 - 240 V
Power Consumption:100 W
Sanding frequenzy: 3.000 - 10.000 rpm
Length: 230 mm
Weigtht: 550 g
Insulated to class 2
PROXXON 28526 Belt sander BBS/S
Feature:
Compact, light and well balanced
With an extra powerful drive for a high material removal capacity
Powerful special DC motor, quiet and long-lasting
Left-justified band grinder, making it possible to process surfaces "right to the corner
Fine adjustment of rollers prevents lateral rolling off
Easy replacement of bands by means of a spring tension system without the use of tools
Housing is made of glass-fibre reinforced POLYAMIDE
Complete with screw clamp and with 5 x 150 grit and 240 grit grinding bands
Supplied in a practical case
Technical data:
Voltage: 220 - 240 V
Power Consumption: 150 W
Grinding band 40 x 265 mm
Grinding surface 60 x 40 mm
band speed 160 m/min
Length 175 mm
Weight 700 g
Class 2 insulation
PROXXONcolor>
28530 Super jig saw STS/E
Features:
This unit offers fantastic and precise cutting capacit Stable head of die-cast zinc for precise fitting
Main housing made of glass-fibre reinforced POLYAMIDE
Special balanced, low noise DC motor with high life expectancy
The stroke speed is variable by means of full wave electronic speed control
Footplate adjustable up to 45° for mitre cuts
Ideal for tight curves in wood (up to 12mm), PC cards to 5mm and non-ferrous metals to 3mm
Complete with 4 super-cut sawing blades of various pitches for wood, plastic and metal
Safely stored in an attractive and extremely stable case made from high-grade polypropylene
Technical data:
220 - 240V
100W
Stroke speed of 2,000 - 4,500/min
Length 230mm
Weight 700g
Isolation de protection classe 2
