PROXXONcolor> 28492 Long neck milling/drilling unit LWB/E
Features:
With a set of gears running on several ball bearings in a stable, die-cast aluminium housing head
Also suitable for right-angled separation of rodsWith a special balanced, powerful, quiet and long-lasting DC motor
Infinitely variable rpm (full wave electronics) Main housing is made of glass-fibre reinforcedPOLYAMID
With MICROMOT hardened steel collets (1,0 - 1,5 - 2,0 - 2,4 - 3,0 and 3,2 mm)
Safetly stored in an attractive and extremely stables case made from high-grade polypropylene
Technical data:
Voltage: 220 - 240 V
Power consumption: 100 W
Rotation speed: 3.000 - 15.000/min
Length 270 mm
Weight 550 g
Insulated to class 2
PROXXON 28500 Mill/drill unit MICROMOT 60
Features:
With a diameter of only 35mm it is unsurpassed easy to manage. Besides the weight of only approx. 230g, the effortless drive via balanced motor with ground spindle and collar bearing allows for quiet run with a pleasing sound to the ear.
The high-quality MICROMOT steel collets ensure accurate clamping of the cutters, without rattling or vibrating of bits and cutters
The size of the machine dictates a 12V drive system, use of a mains adapter of at least 1.0A is thus required
We recommend MICROMOT mains adapters NG 2/S, NG 2/E or NG 5/E
High precision:
Due to ball bearing spindle
Special balanced, low noise DC motor with high life expectancy
Variable electronic speed control with feedback effect (high engine power also at lower speeds)
Housing of glass-fibre reinforced POLYAMIDE with soft component in the finger grip area
20mm-collar for fitting MICROMOT accessories
Six MICROMOT steel collets: One each of 1,0 - 1,5 - 2,0 - 2,4 - 3,0 and 3,2 mm are included
Technical features:
Direct voltage 12 -18V
Power consumption max. 40W
Stroke speed 20,000rpm
Length 220mm
Weight 230g
PROXXON 28510 Mill/drill unit MICROMOT 60/E
Features:
With a diameter of only 35mm it is unsurpassed easy to manage. Besides the weight of only approx. 230g, the effortless drive via balanced motor with ground spindle and collar bearing allows for quiet run with a pleasing sound to the ear.
The high-quality MICROMOT steel collets ensure accurate clamping of the cutters, without rattling or vibrating of bits and cutters.
The size of the machine dictates a 12V drive system, use of a mains adapter of at least 1.0A is thus required.
We recommend MICROMOT mains adapters NG 2/S, NG 2/E or NG 5/E.
High precision:
Due to ball bearing spindle
Special balanced, low noise DC motor with high life expectancy
Variable electronic speed control with feedback effect (high engine power also at lower speeds)
Housing of glass-fibre reinforced POLYAMIDE with soft component in the finger grip area
20 mm-collar for fitting MICROMOT accessories
Six MICROMOT steel collets: one each of 1,0 - 1,5 - 2,0 - 2,4 - 3,0 and 3,2 mm are included
Technical data:
Direct voltage 12 - 18V
Power consumption max. 40W
Stroke speed 5,000 - 20,000rpm
Length 220mm
Weight 230g
PROXXON 28512 MICROMOT 60/EF
Features:
Slim, easily handled and ligh
Quick-action chuck and electronic revolutions adjustment, with feedback effect (high engine power in the lower revolutions area)
Special, balanced, low noise DC motor with high life expectancy
A transformerof at least 1.0A is required for operation
We recommend MICROMOT mains adapters NG 2/S, NG 2/E or NG 5/E
Technical data:
Direct voltage 12 - 18V
Power absorption 40W
Stroke speed 5,000 - 20,000rpm
Length 220mm
Weight 230g
Note:
The MICROMOT 50/EF can also be fitted with MICROMOT steel collets
This is recommended when milling continuously at high lateral pressure
This makes it impossible for the shafts to become loosened after prolonged working
Using collets makes true running better than using the quick-action chuck
PROXXON 28515 Model building and engraving set with mill/drill unit MICROMOT 60/E
Features:
The tens of thousands of these units in use speak for themselves: they are a joy to use!
The diameter of only 35mm makes it easy to handle
The weight of 230g, quietness and effortless drive via the balanced motor with ground spindle and collar bearing all contribute to the ergonomic design
The high-quality MICROMOT steel collets ensure accurate clamping of the cutters, without thumping of bits and cutters
Technical data:
Direct voltage 12 - 18V
Power consumption max. 40W
Stroke speed 5,000 - 20,000rpm
Length 220mm
Weight 230g
Content of the Pack:
The set includes a mains adapter and 34 industrial quality respectively dental quality bits and cutters:
1 diamond grinding bit
1 fine miller
0.5 and 1.0mm micro-drills
1 brass brush
4 high-grade corundum grinding bits (cylinder, sphere, disc and cone shaped)
1 saw blade
4 grinding wheels (2 corundum, 2 silicon carbide)
20 cutting discs and 1 arbor
The 6 MICROMOT collets ranging from 1.0 - 3.2mm are also included
With mains adapter for 220 - 240V operation (12V, 1.0A)
PROXXONcolor> 28520 Delta sander OZI/ESmall yet efficient sander!
Features:
For grinding surfaces in very tight spots,. e. g. corners, sides and inaccessibleThe oscillating motion ensures quiet operation and also facilitates cutting. The oscillating motion ensures quiet operation and also facilitates cutting
The variable speed facility ensures the correct speed for every material Special, balanced, low noise DC motor with high life expectancy
Main housing of glass-fibre reinforced POLYAMIDE Complete with 4 sanding discs:
2 x 80 grit, je 1 x 150 grit und 240 grit
In an attractive case
Technical data:
Voltage: 220 - 240 V
Power Consumption:100 W
Sanding frequenzy: 3.000 - 10.000 rpm
Length: 230 mm
Weigtht: 550 g
Insulated to class 2
PROXXON 28526 Belt sander BBS/S
Feature:
Compact, light and well balanced
With an extra powerful drive for a high material removal capacity
Powerful special DC motor, quiet and long-lasting
Left-justified band grinder, making it possible to process surfaces "right to the corner
Fine adjustment of rollers prevents lateral rolling off
Easy replacement of bands by means of a spring tension system without the use of tools
Housing is made of glass-fibre reinforced POLYAMIDE
Complete with screw clamp and with 5 x 150 grit and 240 grit grinding bands
Supplied in a practical case
Technical data:
Voltage: 220 - 240 V
Power Consumption: 150 W
Grinding band 40 x 265 mm
Grinding surface 60 x 40 mm
band speed 160 m/min
Length 175 mm
Weight 700 g
Class 2 insulation
PROXXONcolor>
28530 Super jig saw STS/E
Features:
This unit offers fantastic and precise cutting capacit Stable head of die-cast zinc for precise fitting
Main housing made of glass-fibre reinforced POLYAMIDE
Special balanced, low noise DC motor with high life expectancy
The stroke speed is variable by means of full wave electronic speed control
Footplate adjustable up to 45° for mitre cuts
Ideal for tight curves in wood (up to 12mm), PC cards to 5mm and non-ferrous metals to 3mm
Complete with 4 super-cut sawing blades of various pitches for wood, plastic and metal
Safely stored in an attractive and extremely stable case made from high-grade polypropylene
Technical data:
220 - 240V
100W
Stroke speed of 2,000 - 4,500/min
Length 230mm
Weight 700g
Isolation de protection classe 2
PROXXON 28534 Jig saw STS 12/E
Features:
Ideal for curved sawing of wood (up to 10mm), printed circuit boards (up to 3mm), and non-ferrous metal (up to 2.5mm)
Powerful special low noise DC motor with high life expectancy
Variable speed control with feedback effect (high engine power in the lower speed range)
Housing of glass-fibre reinforced POLYAMIDE
With additional ball adapter for working on convex and concave surfaces
Is exchanged for the normal saw table by unscrewing a screw
Includes 2 saw blades (coarse and fine)
We recommend MICROMOT mains adapters as of 2.0A for operation
Technical features:
Direct voltage 12 - 18V
Maximum power consumption 100W
Stroke 6mm (adjustable from 2,000 - 5,000rpm)
Length 180mm
Weight 480g
PROXXON 28536 Belt sander BS/E
Features:
For shape finishing, mortising, fine polishing (flat surfaces)
Also for deburring metal, paint removal and fine finishing
Head of die-cast aluminium for high stability and precise ball bearing fitting
Main housing made of glass-fibre reinforced POLYAMIDE
Variable (full wave) electronic speed control
Complete with 2 off 80 and 2 off 180 grit belts
Safely stored in an attrtactive and extremely stable case madse from high-grade polypropylene
Technical data:
Voltage: 220 - 240 V
Power input: 80 W
Belt size: 10 x 330 mm (usable sanding area 10 x 110 mm)
Belt speed: 300 - 700 m/min
Length 350 mm
Weight 650 g
Insulated to class 2
PROXXONcolor>
28547 Long neck angle grinder LHW
Features:
For working steel, non-ferrous metals, glass, ceramics, wood and plastic
For cutting, rough-machining, grinding, precision polishing, fine polishing and carving wood
Special balanced, powerful, quiet and long-lasting DC motor
Stable head made of glass-fibre reinforced POLYAMIDE
A corundum grinding disc (grit 60), a fan sanding disc (grit 100) and a reinforced cutting disc are included Safely stored in an attractive and extremely stable case made from polypropylene
Technical data:
220 - 240V
100W
13,000rpm
Disc diameter 50mm with 10mm interval
Length 270mm
Weight 550g
Run down time less than 1 second
Insulated to class 2
PROXXONcolor> 28549 Corundum sanding disc for LHW, 80 grit, 12 pieces
Features:
Self-adhesive type
used on flat and convex surfaces
Diameter: 50 mm
Package content: 12 pieces
PROXXON 28550 Corundum sanding disc for LHW, 150 grit
Features:
Grit: 150
Self-adhesive type
Used on flat and convex surfaces
Diameter: 50 mm
Package content: 12 pieces
PROXXONcolor> 28554 Sanding fleece for LHW (medium), 5 pieces
Features:
Self-adhesive type
used for cleaning, matting and sanding of steel, stainless steel and non-ferrous metals
also used for paint removal
Diameter: 50 mm
Package content : 5 pieces
PROXXONcolor> 28555 Sanding fleece for LHW (fine), 5 pieces
Features:
Self-adhesive type
used for cleaning, matting and sanding of steel, stainless steel and non-ferrous metals
also used for piant removal
Diameter: 50 mm
Package content: 5 pieces
Proxxon 28559 Tungsten carbide rasp and cutting disc 50 mm, for LHW + LHW/A
Features:
High stock removal in wood and soft materials
Cranked design for convenient shaping and modelling in wood, gypsum and horn (animal hooves)
Less heating up due to cooling holes
Ø 50 mm
with 10 mm bore
Proxxon 28566 Router base OFV
Features:
Made of die-cast aluminium.
With plane-milled work base.
For slotting, milling grooves and edges, chamfering.
With edge guide (max. throat of 150mm), plus interchangeable circle guide.
Adjustable depth stop with preselectable travel stroke.
Ideal also as drilling guide for round parts using the prism in the work base.
PROXXONcolor> 28579 Replacement belts for BS/E, Sil-Carbide, 5 pieces, 180 grit
Features:
With burrs made from silicon carbide for grinding and de-burring of glass and ceramics
Also suitable for grinding brass, steel and cast iron
10 x 330 mm
PROXXONcolor> 28585 Corundum grinding disc for LHW, 60 grit
Features:
Used for de-burring, grinding, sharpening and derusting steel and non-ferrous metals
Diameter: 50 mm
Package content: 1 piece
PROXXONcolor> 28587 Silicon carbide grinding disc for LHW, 60 grit
Features:
Used on hard materials such as glass, stone, ceramics and even hardened steel
Diameter: 50 mm
Package content: 1 piece
