Stahlwille 730NA/5 Torque wrench service MANOSKOP Model 730Na/5 Measuring r. 90-450in lb Tool holders 9 x 12 mm L. 330mm Features:click-typeno reset to "0" required as measuring element is only loaded during the tightening processfast, precise setting thanks to QuickSelect quick adjustmentdual stop signalvery easy-to-read dual scale with colour differentiation of ft-lb/in-lbcontinued loading after release or loads against the functional direction, e.g. in the case of tight screws, have a negative effect on the measuring element. The release mechanism is protected from damage by the fact that it is not affected by tightened screws2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGM (German Federal Utility Model)Mount for interchangeable insert/shell toolsQuickRelease safety lockLeft-hand tightening by turning the insert/shell toolsDisplay deviation ± 3 % (Gr. A/2: 4 %) Technical features:Scale division in·lb: 50 in·lbScale division ft·lb: 1 ft·lbMeasuring range ft·lb: 7-37 ft·lbMeasuring range in·lb: 90-450 in·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 2,5 in·lb Size: a/5 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 330 mmLF: 280,5 mmSF: 17,5 mmWeight: 831 gWeigth kg: 1.06 kgStahlwille 730NA/5Stahlwille product no: 50581005EAN: 4018754139569
Stahlwille 730NII/65 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 130-650N·m Tool holders 22 x 28 mm L. 911mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division N·m: 50 N·mScale division ft·lb: 20 ft·lbMeasuring range N·m: 130-650 N·mMeasuring range ft·lb: 100-480 ft·lbWidth mm (b): 30,6 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 2,5 N·m Weight with box: 7000 gSize: II/65 Size square socket [inside square drive]: 22 x 28 mmHeight mm (h): 25,6 mmLength mm (L): 911 mmLF: 900 mmMA N·m: 130 N·mNominal value N·m: 650 N·mSF: 55 mmWeight: 3490 gWeigth kg: 6.360 kgStahlwille 730NII/65 FIXStahlwille product no: 96503465EAN: 4018754269778
Stahlwille 730NII/65 Torque wrench service MANOSKOP Model 730NII/65 Measuring r. 130-650N·m Tool holders 22 x 28 mm L. 911mm Features:click-typeno need to reset to "0" as measuring element is only loaded during the tightening processfast, precise setting thanks to QuickSelect quick adjustmentdual stop signalvery easy-to-read dual scale with colour differentiation of N-m/ft-lb or ft-lb/in-lbcontinued load after release or loads against the functional direction, e.g. with tight screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017Delivered in a textile bag (from size 65). 65)DBGM (German Federal Utility Model)Mount for interchangeable insert/shell toolsQuickRelease safety lockLeft-hand tightening by turning the insert/shell toolsDisplay deviation ± 3 % (size 2; a/2 4 %) Technical features:Scale division N·m: 50 N·mScale division ft·lb: 20 ft·lbMeasuring range N·m: 130-650 N·mMeasuring range ft·lb: 100-480 ft·lbWidth mm (b): 30,6 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 2,5 N·m Size: II/65 Size square socket [inside square drive]: 22 x 28 mmHeight mm (h): 25,6 mmLength mm (L): 911 mmLF: 900 mmMA N·m: 130 N·mNominal value N·m: 650 N·mSF: 55 mmWeight: 3504 gWeigth kg: 3.5 kgStahlwille 730NII/65Stahlwille product no: 50181365EAN: 4018754239986
Stahlwille 730NR / 10FK Torque wrench service MANOSKOP Model 730NR/10 FK Measuring r. 15-75ft lb Drive 1/2 L. 420mm Features:click-typeno need to reset to "0" as measuring element is only loaded during the tightening processratchet with QuickRelease safety lockquick, precise adjustment thanks to QuickSelect quick adjustmentdual stop signalvery easy-to-read dual scale with colour differentiation of N-m/ft-lb or ft-lb/in-lbContinued load after click-type or loads against the functional direction, e.g. with tight screws in the case of tight screws, do not affect the release mechanism, which is thus protected from damage2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 65 in a sheet steel case)Display deviation ± 4 % Technical features:Scale division N·m: 10 N·mScale division ft·lb: 2,5 ft·lbMeasuring range N·m: 20-100 N·mMeasuring range ft·lb: 15-75 ft·lbExternal square drive (inch): 1/2 b1: 28 mmb2: 33 mmWidth mm (b): 95 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 0,5 N·m Weight with box: 1934 gSize: 10 FK Height mm (h): 70 mmHeight mm (h1): 23 mmHeight mm (h2): 24 mmLength mm (L): 420 mmLF: 336,5 mmWeight: 1146 gStahlwille 730NR / 10FKStahlwille product no: 96503110EAN: 4018754229383
Stahlwille 730NR / 20FK Torque wrench service MANOSKOP Model 730NR/20 FK Measuring r. 30-150ft lb Drive 1/2 L. 513,5mm Features:click-typeno need to reset to "0" as measuring element is only loaded during the tightening processratchet with QuickRelease safety lockquick, precise adjustment thanks to QuickSelect quick adjustmentdual stop signalvery easy-to-read dual scale with colour differentiation of N-m/ft-lb or ft-lb/in-lbContinued load after click-type or loads against the functional direction, e.g. with tight screws in the case of tight screws, do not affect the release mechanism, which is thus protected from damage2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 65 in a sheet steel case)Display deviation ± 4 % Technical features:Scale division N·m: 10 N·mScale division ft·lb: 5 ft·lbMeasuring range N·m: 40-200 N·mMeasuring range ft·lb: 30-150 ft·lbExternal square drive (inch): 1/2 b1: 28 mmb2: 43 mmWidth mm (b): 95 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 1 N·m Weight with box: 2370 gSize: 20 FK Height mm (h): 70 mmHeight mm (h1): 23 mmHeight mm (h2): 26 mmLength mm (L): 513,5 mmLF: 425 mmWeight: 1583 gStahlwille 730NR / 20FKStahlwille product no: 96503120EAN: 4018754229390
Stahlwille 730NR / 5FK Torque wrench service MANOSKOP Model 730NR/5 FK Measuring r. 7-37ft lb Drive 3/8 L. 364mm Features:click-typeno need to reset to "0" as measuring element is only loaded during the tightening processratchet with QuickRelease safety lockquick, precise adjustment thanks to QuickSelect quick adjustmentdual stop signalvery easy-to-read dual scale with colour differentiation of N-m/ft-lb or ft-lb/in-lbContinued load after click-type or loads against the functional direction, e.g. with tight screws in the case of tight screws, do not affect the release mechanism, which is thus protected from damage2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 65 in a sheet steel case)Display deviation ± 4 % Technical features:Scale division N·m: 5 N·mScale division ft·lb: 1 ft·lbMeasuring range N·m: 10-50 N·mMeasuring range ft·lb: 7-37 ft·lbExternal square drive (inch): 3/8 b1: 28 mmb2: 33 mmWidth mm (b): 90 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 0,25 N·m Weight with box: 1763 gSize: 5 FK Height mm (h): 75 mmHeight mm (h1): 23 mmHeight mm (h2): 24 mmLength mm (L): 364 mmLF: 280,5 mmWeight: 973 gStahlwille 730NR / 5FKStahlwille product no: 96503105EAN: 4018754229376
Stahlwille 730NR/10QR FK Torque wrench service MANOSKOP Model 730NR/10QR FK Measuring r. 20-100N·m Drive 1/2 L. 428,5mm Features:click-typeno need to reset to "0" as the measuring element is only loaded during the tightening processratchet with QuickRelease safety lockquick, precise setting thanks to QuickSelect quick adjustmentdual stop signalvery easy-to-read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbContinued load after click-type or loads against the functional direction, e.g. with tight screws in the case of tight screws, do not affect the release mechanism, which is thus protected from damage2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic caseDisplay deviation ± 4 % Technical features:Scale division N·m: 10 N·mScale division ft·lb: 2,5 ft·lbMeasuring range N·m: 20-100 N·mMeasuring range ft·lb: 15-75 ft·lbExternal square drive (inch): 1/2 b1: 28 mmb2: 29 mmWidth mm (b): 92 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 0,5 N·m Weight with box: 1554 gSize: 10QR FK Height mm (h): 70 mmHeight mm (h1): 23 mmHeight mm (h2): 14,5 mmLength mm (L): 428,5 mmLF: 346,5 mmWeight: 1129 gStahlwille 730NR/10QR FKStahlwille product no: 96502110EAN: 4018754180509
Stahlwille 730NR/20QR FK Torque wrench service MANOSKOP Model 730NR/20QR FK Measuring r. 40-200N·m Drive 1/2 L. 526mm Features:click-typeno need to reset to "0" as the measuring element is only loaded during the tightening processratchet with QuickRelease safety lockquick, precise setting thanks to QuickSelect quick adjustmentdual stop signalvery easy-to-read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbContinued load after click-type or loads against the functional direction, e.g. with tight screws in the case of tight screws, do not affect the release mechanism, which is thus protected from damage2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic caseDisplay deviation ± 4 % Technical features:Scale division N·m: 10 N·mScale division ft·lb: 5 ft·lbMeasuring range N·m: 40-200 N·mMeasuring range ft·lb: 30-150 ft·lbExternal square drive (inch): 1/2 b1: 28 mmb2: 41 mmWidth mm (b): 92 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 1 N·m Weight with box: 2014 gSize: 20QR FK Height mm (h): 70 mmHeight mm (h1): 23 mmHeight mm (h2): 18 mmLength mm (L): 526 mmLF: 438,5 mmWeight: 1589 gStahlwille 730NR/20QR FKStahlwille product no: 96502120EAN: 4018754180516
Stahlwille 730NR/40 FK Torque wrench service MANOSKOP Model 730NR/40 FK Measuring r. 60-300ft lb Drive 3/4 L. 657mm Features:click-typeno need to reset to "0" as measuring element is only loaded during the tightening processratchet with QuickRelease safety lockquick, precise adjustment thanks to QuickSelect quick adjustmentdual stop signalvery easy-to-read dual scale with colour differentiation of N-m/ft-lb or ft-lb/in-lbContinued load after click-type or loads against the functional direction, e.g. with tight screws in the case of tight screws, do not affect the release mechanism, which is thus protected from damage2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 65 in a sheet steel case)Display deviation ± 4 % Technical features:Scale division N·m: 20 N·mScale division ft·lb: 10 ft·lbMeasuring range N·m: 80-400 N·mMeasuring range ft·lb: 60-300 ft·lbExternal square drive (inch): 3/4 b1: 28 mmb2: 50 mmWidth mm (b): 92 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 2 N·m Weight with box: 2657 gSize: 40 FK Height mm (h): 70 mmHeight mm (h1): 23 mmHeight mm (h2): 31,5 mmLength mm (L): 657 mmLF: 564,5 mmWeight: 2122 gStahlwille 730NR/40 FKStahlwille product no: 96502140EAN: 4018754180523
Stahlwille 730NR/5QR FK Torque wrench service MANOSKOP Model 730NR/5QR FK Measuring r. 10-50N·m Drive 3/8 L. 372,5mm Features:click-typeno need to reset to "0" as the measuring element is only loaded during the tightening processratchet with QuickRelease safety lockquick, precise setting thanks to QuickSelect quick adjustmentdual stop signalvery easy-to-read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbContinued load after click-type or loads against the functional direction, e.g. with tight screws in the case of tight screws, do not affect the release mechanism, which is thus protected from damage2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic caseDisplay deviation ± 4 % Technical features:Scale division N·m: 5 N·mScale division ft·lb: 1 ft·lbMeasuring range N·m: 10-50 N·mMeasuring range ft·lb: 7-37 ft·lbExternal square drive (inch): 3/8 b1: 28 mmb2: 29 mmWidth mm (b): 92 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 0,25 N·m Weight with box: 1386 gSize: 5QR FK Height mm (h): 70 mmHeight mm (h1): 23 mmHeight mm (h2): 14,5 mmLength mm (L): 372,5 mmLF: 291 mmWeight: 961 gStahlwille 730NR/5QR FKStahlwille product no: 96502105EAN: 4018754180493
Stahlwille 730NR/65 FK-HD Torque wrench service MANOSKOP Model 730NR/65 FK-HD Measuring r. 100-480ft lb Drive 3/4 L. 944mm Features:click-typeno need to reset to "0" as measuring element is only loaded during the tightening processratchet with QuickRelease safety lockquick, precise adjustment thanks to QuickSelect quick adjustmentdual stop signalvery easy-to-read dual scale with colour differentiation of N-m/ft-lb or ft-lb/in-lbContinued load after click-type or loads against the functional direction, e.g. with tight screws in the case of tight screws, do not affect the release mechanism, which is thus protected from damage2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 65 in a sheet steel case)Display deviation ± 4 % Technical features:Scale division N·m: 50 N·mScale division ft·lb: 20 ft·lbMeasuring range N·m: 130-650 N·mMeasuring range ft·lb: 100-480 ft·lbExternal square drive (inch): 3/4 b1: 30,6 mmb2: 58 mmWidth mm (b): 85 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 2,5 N·m Weight with box: 6188 gSize: 65 FK-HD Height mm (h): 70 mmHeight mm (h1): 25,6 mmHeight mm (h2): 36 mmLength mm (L): 944 mmLF: 848 mmWeight: 3698 gStahlwille 730NR/65 FK-HDStahlwille product no: 96502265EAN: 4018754221554
Stahlwille 730R/12 QUICK SERVICE-MANOSKOP torque wrench Model 730R Quick Measuring r. 25-130N·m Drive 1/2 L. 475mm Features: click-type no need to reset to "0" as the measuring element is only loaded during the tightening process mount for interchangeable insert/shell tools QuickRelease safety lock Flash adjustment with easy-to-operate clamping lever in the handle Ergonomically shaped, non-slip adjustment element with thumb recess Optimised ball handle for fatigue-free working Dual stop signal Double scale N-m/ft-lb or N-m/in-lb On request, also available as an N-m version only without double scale Left-hand tightening by turning the insert/shell tools Continued load after click-type operation or loads against the functional direction, e.g. in the case of tight screws, have an with tight screws, do not affect the release mechanism, which is thus protected from damage Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessary Certificate in accordance with DIN EN ISO 6789-2:2017 Display deviation ± 4 % Technical features:Scale division N·m: 2,5 N·mMeasuring range N·m: 25-130 N·mMeasuring range ft·lb: 20-95 ft·lbExternal square drive (inch): 1/2 Width mm (b): 52 mmDIN: DIN EN ISO 6789-2:2017 Size: 12 Height mm (h): 52 mmLength mm (L): 475 mmWeight: 1488 gWeigth kg: 1.49 kgStahlwille 730R/12 QUICKStahlwille product no: 96504012EAN: 4018754269501
Stahlwille 730R/2 QUICK SERVICE-MANOSKOP torque wrench Model 730R Quick Measuring r. 4-20N·m Drive 3/8 L. 255mm Features: click-type no need to reset to "0" as the measuring element is only loaded during the tightening process mount for interchangeable insert/shell tools QuickRelease safety lock Flash adjustment with easy-to-operate clamping lever in the handle Ergonomically shaped, non-slip adjustment element with thumb recess Optimised ball handle for fatigue-free working Dual stop signal Double scale N-m/ft-lb or N-m/in-lb On request, also available as an N-m version only without double scale Left-hand tightening by turning the insert/shell tools Continued load after click-type operation or loads against the functional direction, e.g. in the case of tight screws, have an with tight screws, do not affect the release mechanism, which is thus protected from damage Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessary Certificate in accordance with DIN EN ISO 6789-2:2017 Display deviation ± 4 % Technical features:Scale division N·m: 0,5 N·mMeasuring range N·m: 4-20 N·mExternal square drive (inch): 3/8 Width mm (b): 55 mmDIN: DIN EN ISO 6789-2:2017 Size: 2 Height mm (h): 55 mmLength mm (L): 255 mmWeight: 455 gWeigth kg: 0.540 kgStahlwille 730R/2 QUICKStahlwille product no: 96504002EAN: 4018754311354
Stahlwille 730R/20 QUICK SERVICE-MANOSKOP torque wrench Model 730R Quick Measuring r. 40-200N·m Drive 1/2 L. 530mm Features: click-type no need to reset to "0" as the measuring element is only loaded during the tightening process mount for interchangeable insert/shell tools QuickRelease safety lock Flash adjustment with easy-to-operate clamping lever in the handle Ergonomically shaped, non-slip adjustment element with thumb recess Optimised ball handle for fatigue-free working Dual stop signal Double scale N-m/ft-lb or N-m/in-lb On request, also available as an N-m version only without double scale Left-hand tightening by turning the insert/shell tools Continued load after click-type operation or loads against the functional direction, e.g. in the case of tight screws, have an with tight screws, do not affect the release mechanism, which is thus protected from damage Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessary Certificate in accordance with DIN EN ISO 6789-2:2017 Display deviation ± 4 % Technical features:Scale division N·m: 5 N·mMeasuring range N·m: 40-200 N·mMeasuring range ft·lb: 30-145 ft·lbExternal square drive (inch): 1/2 Width mm (b): 55 mmDIN: DIN EN ISO 6789-2:2017 Size: 20 Height mm (h): 55 mmLength mm (L): 530 mmWeight: 1626 gWeigth kg: 1.63 kgStahlwille 730R/20 QUICKStahlwille product no: 96504020EAN: 4018754269518
Stahlwille 730R/5 QUICK SERVICE-MANOSKOP torque wrench Model 730R Quick Measuring r. 6-50N·m Drive 3/8 L. 380mm Features: click-type no need to reset to "0" as the measuring element is only loaded during the tightening process mount for interchangeable insert/shell tools QuickRelease safety lock Flash adjustment with easy-to-operate clamping lever in the handle Ergonomically shaped, non-slip adjustment element with thumb recess Optimised ball handle for fatigue-free working Dual stop signal Double scale N-m/ft-lb or N-m/in-lb On request, also available as an N-m version only without double scale Left-hand tightening by turning the insert/shell tools Continued load after click-type operation or loads against the functional direction, e.g. in the case of tight screws, have an with tight screws, do not affect the release mechanism, which is thus protected from damage Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessary Certificate in accordance with DIN EN ISO 6789-2:2017 Display deviation ± 4 % Technical features:Scale division N·m: 2 N·mMeasuring range N·m: 6-50 N·mMeasuring range ft·lb: 5-36 ft·lbExternal square drive (inch): 3/8 Width mm (b): 50 mmDIN: DIN EN ISO 6789-2:2017 Size: 5 Height mm (h): 50 mmLength mm (L): 380 mmWeight: 994 gWeigth kg: 0.99 kgStahlwille 730R/5 QUICKStahlwille product no: 96504005EAN: 4018754269488
