Migatronic Welding Torches ML 360 Twist
Benefits:
MIG-A Twist:
Swan-neck can be turned at 15° steps up to 90° in both directions
Ergonomic correct working whichever welding-angle you use
Euro-connector, suitable with nearly all welding machines
Tecnical Data:
Duty-cycle CO-2 60/100%: 380/340 A
Duty-cycle Mixgas 60/100%: 310/270 A
Wire-diameter: 0,6-1,6 mm, 1,0 mm nozzle included
Cable: 50 mm²
Connection: Euro with spring-pins
Migatronic Welding Torches ML 360 Twist
Benefits:
MIG-A Twist:
Swan-neck can be turned at 15° steps up to 90° in both directions
Ergonomic correct working whichever welding-angle you use
Euro-connector, suitable with nearly all welding machines
Tecnical Data:
Duty-cycle CO-2 60/100%: 380/340 A
Duty-cycle Mixgas 60/100%: 310/270 A
Wire-diameter: 0,6-1,6 mm, 1,0 mm nozzle included
Cable: 50 mm²
Connection: Euro with spring-pins
Migatronic Welding Torches ML 360 Twist
Benefits:
MIG-A Twist:
Swan-neck can be turned at 15° steps up to 90° in both directions
Ergonomic correct working whichever welding-angle you use
Euro-connector, suitable with nearly all welding machines
Tecnical Data:
Duty-cycle CO-2 60/100%: 380/340 A
Duty-cycle Mixgas 60/100%: 310/270 A
Wire-diameter: 0,6-1,6 mm, 1,2 mm nozzle included
Cable: 50 mm²
Connection: Euro with spring-pins
Migatronic Welding Torches ML 360 Twist
Benefits:
MIG-A Twist:
Swan-neck can be turned at 15° steps up to 90° in both directions
Ergonomic correct working whichever welding-angle you use
Euro-connector, suitable with nearly all welding machines
Tecnical Data:
Duty-cycle CO-2 60/100%: 380/340 A
Duty-cycle Mixgas 60/100%: 310/270 A
Wire-diameter: 0,6-1,6 mm, 1,0 mm nozzle included
Cable: 50 mm²
Connection: Euro with spring-pins
Migatronic Miga Super Blue Wolframelektrode WS2 ø1,6mm
Merkmale:
WS2 ø1,6mm
Die optimale Wahl zum DC- und AC/DC-Schweißen in allen Materialtypen.
Miga Super Blue gewährleistet Ihnen hochwertige Schweißergebnisse.
Hervorragende Zünd- und Wiederzündeigenschaften
Lange Standzeit
Stabiler Lichtbogen
Die qualitativ hochwertige Miga Super Blue Wolframelektrode wurde in Kooperation mit einem europäischen Hersteller entwickelt.
Miga Super Blue hat hervorragende Schweißeigenschaften und enthält keine radioaktiven Materialien.
Migatronic Miga Super Blue Wolframelektrode WS2 ø2,4mm
Merkmale:
WS2 ø2,4mm
Die optimale Wahl zum DC- und AC/DC-Schweißen in allen Materialtypen.
Miga Super Blue gewährleistet Ihnen hochwertige Schweißergebnisse.
Hervorragende Zünd- und Wiederzündeigenschaften
Lange Standzeit
Stabiler Lichtbogen
Die qualitativ hochwertige Miga Super Blue Wolframelektrode wurde in Kooperation mit einem europäischen Hersteller entwickelt.
Miga Super Blue hat hervorragende Schweißeigenschaften und enthält keine radioaktiven Materialien.
Migatronic Miga Super Blue Wolframelektrode WS2 ø3,2mm
Merkmale:
WS2 ø3,2mm
Die optimale Wahl zum DC- und AC/DC-Schweißen in allen Materialtypen.
Miga Super Blue gewährleistet Ihnen hochwertige Schweißergebnisse.
Hervorragende Zünd- und Wiederzündeigenschaften
Lange Standzeit
Stabiler Lichtbogen
Die qualitativ hochwertige Miga Super Blue Wolframelektrode wurde in Kooperation mit einem europäischen Hersteller entwickelt.
Miga Super Blue hat hervorragende Schweißeigenschaften und enthält keine radioaktiven Materialien.
Migatronic ZETA 60 Plasmaschneider
Migatronic ZETA - Serie
Dreiphasiges Plasmaschneidgerät für manuelles oder automatisiertes Schneiden
Einstellbereich: 20 A/88 V - 60 A/104 V
Einschaltdauer max./40 °C: 60 A/40 %/104 V
6m Plasma Brenner
Ein robustes dreiphasiges Plasmaschneidgerät für manuelles oder automatisiertes Schneiden
Verwenden Sie die Zeta 60 zum manuellen oder automatisierten Schneiden aller leitenden Metalle und Legierungen. Das Gerät wurde für den Werkstatteinsatz und Reparaturen vor Ort konzipiert. Ein Knopfdruck genügt un die Zeta Maschinen sind bereit zum Schneiden von gestanzten und gelochten Blechen.
Energiesparende Standby-Funktion
Tragbar
Verschleißteile mit langer Lebensdauer
Plasmaschneiden ist ganz einfach
Das einfache und benutzerfreundliche Bedienfeld erleichtert die Steuerung des Plasmaschneidprozesses. Stellen Sie die Stromstärke passend zur Materialstärke ein und Sie können schneiden. Mit Zeta 60 können Sie Qualitätsschnitte bis zu Blechdicken von 25 mm ausführen. Wenn keine speziellen Anforderungen an die Qualität des Schnitts gestellt werden, kann darüber hinaus bis 50 % stärkeres Materiel getrennt werden.
Lange Lebensdauer und optimale Wirtschaftlichkeit
Der Plasmalichtbogen wird automatisch durch den Pilotlichtbogen kontaktlos gezündet. Dadurch wird die Lebensdauer der Verschleißteile des Brenners verlängert. Das Schneiden in gestanzte oder gelochte Bleche ist durch eine fortschrittliche Technologie möglich, die die Maschine zwischen Schneidlichtbogen und Pilotlichtbogen umschaltet.
Die Zeta Plasmaschneider zeichnen sich durch energiesparende Standby-Funktionen für einen optimalen Schnitt zu geringen Kosten aus.
Produktvorteile:
Tragbar:
Nehmen Sie Ihren Zeta-Plasmaschneider mit!
Bedienfeld:
Das Bedienfeld ist einfach zu bedienen.
Lieferumfang:
Migatronic ZETA 60
6m Plasma-Brenner
3m Massekabel mit Klemme
3m Netzkabel
Technische Merkmale:
Einstellbereich: 20 A/88 V - 60 A/104 V
Netzspannung +/- 15 %: 3 × 400
Sicherung Typ C: 10 A
Einschaltdauer 100 %/40 °C: 40 A/96 V
Einschaltdauer 60 %/40 °C: 50 A/100 V
Einschaltdauer max./40 °C: 60 A/40 %/104 V
Wirkungsgrad: 0.9
Leerlaufspannung: 240 V
Qualitätsschnitt (Plasma): < 12 mm
Schutzklasse: IP 23
Norm: EN/IEC60974 -1. -10.
Maße (H × B × L): 360 mm × 220 mm × 570 mm
Gewicht: 27 kg
MIKE SANDERs Grease Tape 5 cm x 10 m
Features:
Mike Sander`s rust prevention grease provides cavity protection and under-sealing for blank, corroded and painted sheet metal. It is suited to all types of vehicels, vintage and classic, new and used of all ages.
It does not have to be applied by a garage, it can be applied by a "do-it-yourself" enthusiast with the right equipment.
The product together with the "hot-application-method" were developed over 35 years ago by Mike Sander.
Since then Mike Sanders prevention grease achieved several first ranks in product tests, uncounted protected cars and sucessfull industrial applications.
Usage direction:
To improve the penetration into the seams and corners, heating in a spray booth ore with a hot air pistol is possible, although when applied, in the summer months this is not necessary.
As a precautionary measure it is recommended to cover the vehicles with a plastic foil and to place newspapers underneath the water draining holes in the bodywork.
Grease that drops out of the vehicle during treatment can be re-heated and used again.
This product is especially effective when used under screws, chrome strips and light fittings.
Nuts and bolts that have been treated will undo easily even after years of neglect.
An examination of the vehicle in respect of corrosion and if necessary an additional treatment is recommended every 2-4 years.
MIKE SANDERS Rust Prevention Grease 24 kg
Features:
Mike Sander`s rust prevention grease provides cavity protection and under-sealing for blank, corroded and painted sheet metal. It is suited to all types of vehicels, vintage and classic, new and used of all ages.
It does not have to be applied by a garage, it can be applied by a "do-it-yourself" enthusiast with the right equipment.
The product together with the "hot-application-method" were developed over 35 years ago by Mike Sander.
Since then Mike Sanders prevention grease achieved several first ranks in product tests, uncounted protected cars and sucessfull industrial applications.
Usage direction
To improve the penetration into the seams and corners, heating in a spray booth ore with a hot air pistol is possible, although when applied, in the summer months this is not necessary.
As a precautionary measure it is recommended to cover the vehicles with a plastic foil and to place newspapers underneath the water draining holes in the bodywork.
Grease that drops out of the vehicle during treatment can be re-heated and used again.
This product is especially effective when used under screws, chrome strips and light fittings.
Nuts and bolts that have been treated will undo easily even after years of neglect.
An examination of the vehicle in respect of corrosion and if necessary an additional treatment is recommended every 2-4 years.
MIKE SANDERS Rust prevention grease 4 kg
Soft mix for extremely cold regions
Features:
Mike Sander`s rust prevention grease provides cavity protection and under-sealing for blank, corroded and painted sheet metal. It is suited to all types of vehicels, vintage and classic, new and used of all ages.
It does not have to be applied by a garage, it can be applied by a "do-it-yourself" enthusiast with the right equipment.
The product together with the "hot-application-method" were developed over 35 years ago by Mike Sander.
Since then Mike Sanders prevention grease achieved several first ranks in product tests, uncounted protected cars and sucessfull industrial applications.
Usage direction
To improve the penetration into the seams and corners, heating in a spray booth ore with a hot air pistol is possible, although when applied, in the summer months this is not necessary.
As a precautionary measure it is recommended to cover the vehicles with a plastic foil and to place newspapers underneath the water draining holes in the bodywork.
Grease that drops out of the vehicle during treatment can be re-heated and used again.
This product is especially effective when used under screws, chrome strips and light fittings.
Nuts and bolts that have been treated will undo easily even after years of neglect.
An examination of the vehicle in respect of corrosion and if necessary an additional treatment is recommended every 2-4 years.
MIKE SANDERS Rust prevention grease 4 kg
Features:
Mike Sander`s rust prevention grease provides cavity protection and under-sealing for blank, corroded and painted sheet metal. It is suited to all types of vehicels, vintage and classic, new and used of all ages.
It does not have to be applied by a garage, it can be applied by a "do-it-yourself" enthusiast with the right equipment.
The product together with the "hot-application-method" were developed over 35 years ago by Mike Sander.
Since then Mike Sanders prevention grease achieved several first ranks in product tests, uncounted protected cars and sucessfull industrial applications.
Usage direction
To improve the penetration into the seams and corners, heating in a spray booth ore with a hot air pistol is possible, although when applied, in the summer months this is not necessary.
As a precautionary measure it is recommended to cover the vehicles with a plastic foil and to place newspapers underneath the water draining holes in the bodywork.
Grease that drops out of the vehicle during treatment can be re-heated and used again.
This product is especially effective when used under screws, chrome strips and light fittings.
Nuts and bolts that have been treated will undo easily even after years of neglect.
An examination of the vehicle in respect of corrosion and if necessary an additional treatment is recommended every 2-4 years.
MIKE SANDERS Rust prevention grease 750 g soft
Features:
Mike Sander`s rust prevention grease provides cavity protection and under-sealing for blank, corroded and painted sheet metal.
It is suited to all types of vehicels, vintage and classic, new and used of all ages.
It does not have to be applied by a garage, it can be applied by a "do-it-yourself" enthusiast with the right equipment.
The product together with the "hot-application-method" were developed over 35 years ago by Mike Sander.
Since then Mike Sanders prevention grease achieved several first ranks in product tests, uncounted protected cars and sucessfull industrial applications.
Usage direction
To improve the penetration into the seams and corners, heating in a spray booth ore with a hot air pistol is possible, although when applied, in the summer months this is not necessary.
As a precautionary measure it is recommended to cover the vehicles with a plastic foil and to place newspapers underneath the water draining holes in the bodywork.
Grease that drops out of the vehicle during treatment can be re-heated and used again.
This product is especially effective when used under screws, chrome strips and light fittings.
Nuts and bolts that have been treated will undo easily even after years of neglect.
An examination of the vehicle in respect of corrosion and if necessary an additional treatment is recommended every 2-4 years.
MIKE SANDERS Rust prevention grease 750 g
Features:
Mike Sander`s rust prevention grease provides cavity protection and under-sealing for blank, corroded and painted sheet metal.
It is suited to all types of vehicels, vintage and classic, new and used of all ages.
It does not have to be applied by a garage, it can be applied by a "do-it-yourself" enthusiast with the right equipment.
The product together with the "hot-application-method" were developed over 35 years ago by Mike Sander.
Since then Mike Sanders prevention grease achieved several first ranks in product tests, uncounted protected cars and sucessfull industrial applications.
Usage direction
To improve the penetration into the seams and corners, heating in a spray booth ore with a hot air pistol is possible, although when applied, in the summer months this is not necessary.
As a precautionary measure it is recommended to cover the vehicles with a plastic foil and to place newspapers underneath the water draining holes in the bodywork.
Grease that drops out of the vehicle during treatment can be re-heated and used again.
This product is especially effective when used under screws, chrome strips and light fittings.
Nuts and bolts that have been treated will undo easily even after years of neglect.
An examination of the vehicle in respect of corrosion and if necessary an additional treatment is recommended every 2-4 years.
Montage-Set für 2,8 t Hebebühne:
Lieferumfang:
Schwerlastanker-Set:
8 Schwerlastanker zur verankerung der Hebebühne im Beton
18 mm Bohrdurchmesser
1 l Spindelöl:
auf die Kunststoffteile abgestimmt
zur Schmierung der Spindel
Mueller 277 010 Clip Lifter 5 mm
Features:
Mueller 277 010 Clip Lifter 5 mm
For plastic fasteners, plastic clips, upholstery or door panels.
Dimensions:
Length 175 mm
Width 5 / 15 mm
Mueller 277 015 Clip Lifter set 5-pieces
Features:
Mueller 277 015 Clip Lifter set 5 pieces
For plastic fasteners, plastic clips, upholstery or door panels.
Scope of delivery:
1 x Clip Lifter 5 mm (277008)
1 x Clip Lifter 7 mm (277009)
1 x Clip Lifter 5 mm half-round (277010)
1 x Clip Lifter 11 mm S-Shape (277011)
1 x Clip Lifter 11 mm angled (277012)
Müller 243002/HS Karosserie-Trennmeißel
Merkmale:
Speziell zum Trennen bzw. Lösen von Karosserieteilen an Punktschweißnähten
Perfekt geeignet zum Lösen der Karosserieteile nach dem Aufbohren der Schweißpunkte
Zum Trennen von Blechen durch Einsatz der seitlichen Schneidkante
Extra dünne Sonderanfertigung.
Technische Merkmale:
Überlange, brünierte Ausführung
DIN 7255
nachschleifbar
Schneidenstärke 2,5 mm
Länge 300 mm
MULTI FILM 1 liter TRANSPARENT
MULTI FILM from Hodt Fluid Film protects and preserves as a compact coating material as well as a primer and top coat.
1 liter transparent
Compact coating material
Protects and preserves
Solves many rust protection problems
Features
HODT MULTI FILM is an aqueous emulsion with mild odor, low VOC content and very low toxicity.
It is a non-hazardous and environmentally friendly alternative to solventborne topcoats and corrosion inhibitors at a dry film thickness (dft) > 100 μm.
1-component product with excellent adhesion and elasticity, rapid oxidative drying, water resistance and recoatability.
Suitable substrates: organic coatings, grease-free iron, galvanized steel, aluminum, cement plaster, plastic plaster, concrete, plastic, emulsion paint coatings, etc.
Economical to use and uncomplicated to apply. In one operation, a layer thickness of
50 to 80 μm can be applied (by spraying and dipping).
Can be diluted with water as desired, which results in a much greater reduction in viscosity
than in the case of synthetic resins with organic solvents; the product meets the highest requirements in terms of chemical
and mechanical resistance. It adheres to natural and synthetic rubber, polyethylene, PVC.
The water-based clear coat also meets the strict environmental requirements.
High elasticity of the coating ensures that no cracking or chipping occurs during expansion or contraction of the substrate.
contraction of the substrate metal.
As an oxidatively drying coating, HODT MULTI FILM must, as with alkyd products, absorb oxygen for curing.
for curing. It is therefore not sufficient for the water in the emulsion to evaporate and form a film (so-called anti-drying),
additional drying time must be allowed for the absorption of oxygen in order to obtain a fully loadable coating.
coating is obtained.
Although HODT MULTI FILM is highly resistant to solvents, i.e. it can be used as a primer for other coatings, it is advisable to use it as a primer for other coatings.
it is advisable to perform a resistance test on a small area before such an application.
Mode of operation:
The substrate for HODT MULTI FILM must be free of grease!
When applying HODT MULTI FILM by brush, roller, dipping or spraying, always apply "dry on dry" (after approx. 2 hours) to obtain a film thickness of approx. 120 - 160 μm.
For spraying, HODT MULTI FILM can be diluted with water if necessary.
However, after dilution, more coats must be applied to create the desired optimum film thickness.
This drying time depends on the temperature. Forced drying at a temperature of 50 - 60 °C can reduce the drying time to 2 -3 hours.
On the other hand, at a normal temperature of approx. 20°C, a drying time of 24 hours must be expected before further coats of HODT MULTI FILM or other paints can be applied to the multifilm coating.
Technical Merkmale:
Temperature range (in °C): -40°C to 120°C (+150° short).
Touch dry: (at 20 °C u. 25 μm film thickness): 2 hrs.
Curing time (at 20 °C in hours): 24
Solvent resistance: good
Moisture resistance: good
Thinner: water
also available in aerosol: no
Color: clear / black
Dynamic viscosity: (10 1/s; 23 °C) DIN EN ISO 3219 10000 mPa.sek
Flash point (in liquid form): not applicable
Solids content (wt%): 34-36
Spec. weight: 1.02 g/cm³
Salt spray test according to DIN EN ISO 9227 Duration 480 h
