Proxxon 23972 IMPACT socket 1/2", 19 mm, length 130 mm   Features: For tyre change service centres and for garages. Made of high-alloy special steel for superior wear resistance and a maximum torque of 500Nm. Sockets with plastic cover and plastic stop insert prevent from damaging aluminium wheel rims and the surface of wheel nuts.   Technical features: Size: 19 mm extra long version (130mm)

Proxxon 23972 IMPACT socket 1/2", 21 mm, length 130 mm   Features: For tyre change service centres and for garages. Made of high-alloy special steel for superior wear resistance and a maximum torque of 500Nm. Sockets with plastic cover and plastic stop insert prevent from damaging aluminium wheel rims and the surface of wheel nuts.   Technical features: Size: 21 mm extra long version (130mm)

Proxxon 24002 Precision lathe PD 250/E For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening the mill/drill head PF 230. Centre distance of 250mm. Swing 70mm. Height over cross slide 46mm. Features: Machine bed: Of cast iron, wide-legged shape and prism slides. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230. Covered lead spindle. Headstock: Of die-cast aluminium. Precision bearing mounted main spindle (run-out without chuck 1/100 mm) with 10.5mm opening. Chuck side 70mm hollowed to 14mm. With MK 2 bore. Rotary switch for engaging automatic feed via lead and feed spindle (optionally 0.05 or 0.1mm/rev.). Tailstock: Of die-cast aluminium. Spindle Ø 20mm with bore MK1, retractable up to 30mm. With millimetre scale and live centre. Support: Bed carriage made of die-cast zinc. Cross slide and top slide of steel (adjustment 60 resp. 45mm). Turning tool post for cutting tools size 8 x 8mm. Drive: Quiet DC special motor with 3-stage belt drive for 300 - 900 and 3,000rpm. With additional speed control (full-wave electronics) continuously adjustable from 100 - 300 or 1,000rpm, depending on belt ratio. Clockwise - anticlockwise rotation. Main switch with emergency-stop function and restart protection. Lathe chuck: High quality 3-jaw chuck as per DIN 8386 Class 1 (concentricity tolerance 0.04mm). Capacity through reversing jaws from 2 - 90mm. Including lathe chuck guard with safety shutdown. Handwheels: Of aluminium, with adjustable scale ring (1 division = 0.05mm, 1 revolution = 1mm). Thread cutting device: With change gears for LH and RH threads of the most important metric pitches (0.5 - 0.625 - 0.7 - 0.75 - 0.8 - 1.0 - 1.25 - 1.5). Other technical data: 220 - 240V. 50/60Hz. Size L 560, W 270, H 170mm. Weight approx. 12kg.

Proxxon 24046 Universal dividing attachment UT 250   For fixation on compound table KT 150 and milling machines FF 230 and FF 500/BL. Worm drive for divisions through 360°. Feed adjustment by handwheel with graduated, zero-adjustable dial (1 revolution = 10°). Unit may be fixed horizontally or vertically. For compound tables with distances between T-slots of 45 - 60mm. The flange of the dividing attachment is the same size as that of the main spindle of the PD 250/E lathe, thus 3 jaw chuck (NO 24 034) and 4 jaw chuck (NO 24 036) may be mounted. Incl. faceplate Ø100mm and step clamp set of steel: Two each step blocks and clamps. With matching slot nuts, threaded rods and nuts. Packed in a wooden box. For accurate machining of circular work pieces. Used to manufacture sprockets, gears, ratchets, cams, etc. Note: The work piece pictured here is not including in the delivery.

Proxxon 24062 Radius cutting attachment   Features: Is mounted on the cross slide in place of the tool holder For producing convex and concave shapes For turning radii or 3/4 spheres up to max. 32mm Height adjustable tool holder (boring tool tip adjustable from 30 through 45mm above cross slide) for use with FD 150/E, PD 250/E, PD 400 and older PROXXON lathes In wooden box with sliding lid   Technical features: Dimensions: base plate 67 x 50mm Height 55mm Complete with finishing cutter 8 x 8 x 80mm

PROXXONcolor> 24082 Die holder for round dies, threads M 3 to M 10 Features: Sizes: M 3 - 4 - 5 - 6 - 8 - 10 The straight shaft fits the holder Ø 10mm when mounted in the tailstock of the PD 230/E or PD 400 The holder is held by hand while cutting the threads Comes in a wooden box

PROXXONcolor> 24098 Tool holder for rotary tools, for use on lathe machines Features: Made of steel 30 x 10 x 65mm This holder allows mounting of our rotary tool LBS/E or IBS/E to the tool post of the lathes PD 230/E and PD 400 for grinding or polishing urposes MICROMOT collar size Ø 20mm Shaft 8 x 10mm for tool holders PD 230/E and PD 400

PROXXON 24104 Mill/drill head PF 230 Converts the lathe PD 250/E and PD 400 into a complete machining centre! Features: Set includes column (35 x 400mm), mounting bracket and bolts The mounting position on the PD 230/E is already milled The lathe's top slide is replaced with the table (supplied) of 110 x 70mm, with 3 T-slots 12 x 6 x 5mm The lathe now functions as a compound table, with X-Y travel being longitudinally and cross-wise respectively The mill/drill head is identical to the MICRO miller FF 230 (see page 53) Three collets of sizes 6 - 8 and 10mm are included Technical data: 220 - 240V. 140W. 50/60Hz Spindle speeds of 280 - 550 - 870 - 1,200 - 1,500 and 2,200rpm

PROXXONcolor> 24106 Compound table KT 230 Features: The solid table is T-slotted to the MICROMOT standard of 12 x 6 x 5mm way X: 170 mm way Y: 65 mm Nut: brass With 34mm bore to mount the PF 230 mill/drill head (the end fitting of the mill head's 35mm column is machined to 34mm) Fits the PF 230 and PF 210 Weight approx. 11kg

PROXXONcolor> 24108 MICRO miller FF 230 Features: The headstock swivels through 360°, indicated on a scale Height is adjusted via a zero adjustable handwheel, also used as fine feed when milling (one revolution equals 1mm travel) The quill and headstock may be locked in position, essential when milling The powerful motor effects drive via a poly-V belt, yielding high torques, especially at lower speeds Collets of 6 - 8 and 10mm are included The solid table is T-slotted to the MICROMOT standard of 12 x 6 x 5mm The clamps (not included) Handwheels with zero adjustable scale (1 rev = 1.5mm, 1 division = 0.05mm) Handwheel serves as both height adjustment and mill fine feed Poly-V drive system offers 6 speeds between 280 and 2,200rpm The fine step feed is not included Technical data: 220 - 240V. 140W. 50/60Hz Spindle speeds of 280 - 550 - 870 - 1,200 - 1,500 and 2,200rp 30mm travel Table size 270 x 80mm, column 35 x 400mm long X-Ytravel is 170 x 65mm Maximum height 180mm and depth 130mm Overall height approx. 500mm Weight approx. 17.0kg Important! For clean milling we recommend to clamp the quill as well as the headstock onto the column. With the FF 230 this is easily done with the clamp!

PROXXON color> 24150 Precision lathe FD 150/E For facing and longitudinal turning, for boring, taper turning, slicing and drilling. Complete with three-jaw chuck and live centre Features: Machine bed with dovetail guides of continuous casting aluminium Die-cast aluminium headstock spindle With quiet special DC motor, 2-stage belt drive and additional electronic speed control for high engine power at low speeds for larger work pieces and for the appropriate cutting speed, even for the smallest pieces Main switch with emergency stop function and restart protection Precision bearing mounted main spindle with continuous 8.5mm bore Chuck fit for standard ER 11 type collets Three-jaw chuck , self-centering (inside jaws 1.5 - 32mm), (outside jaws 20 - 60mm) Die-cast aluminium tailstock with spindle and live centre (fitting MK 0/ short) Support: To be shifted manually on the bed and clamped with lever Rotating quick change tool post for turning steels 6 x 6mm Processing via top slide (60mm, travel distance Z) and cross slide (40mm, travel distance X) The angle adjustment of the upper carriage makes it possible to turn tapers up to +/- 45° Handwheels with zero adjustable scale ring (1 division = 0.05mm, 1 revolution = 1.0mm) Technical data: 220 - 240V. 50/60Hz Distance between centres 150mm Swing 55mm Height over cross slide 33mm Cross slide travel (X) 40mm, top slide travel (Z) 60mm Steel tool post for turning steels 6 x 6mm Spindle bore 8.5mm 2-stage belt drive with electronic speed control: Stage 1 = 500 - 2,500rpm. Stage 2 = 1,000 - 5,000rpm Dimensions approx. 360 x 150 x 150mm Weight 4.5kg Insulated to class 1

Proxxon 24158 4-jaw-chuck, self-centering for FD 150/E Used to clamp cylindrical, square or octagonal work pieces. High accuracy. Clamping range with reversible jaws from 1 - 20mm (inside) and 20 - 50mm (outside). Ø 50mm.

Proxxon 24217 Parting tool holder and tool Used in the PD 250/E quick change system. Used to part stock and cut slots. The 12 x 3 x 85mm HSS tool contains cobalt. Spare tools available under NO 24 554.

PROXXONcolor> 24255 Precision vice PM 60 (60 mm) Features: May be used on its side and back Jaw width of 60mm, clamping capacity 42mm Total length 100mm Complete with securing bolts and packed in a wooden box with sliding lid

PROXXON 24256 Step clamps made of steel Features: The step clamps set is supplied with the KT 70, but can also be ordered separately Set consists of 2 stepped blocks and clamps, T-slot nuts of the MICROMOT standard (11.5 x 11 x 4mm), bolts This set also fits the mill/lathe systems PD 230/E and PD 400 Comes in wooden case

PROXXON 24257 Milled steel step clamps , 2 pieces Features: For MICROMOT standard T-slots (12 x 6 x 5mm) Two each step blocks and clamps with matching nuts and fixation screws For work pieces up to a thickness of approx. 35mm Neatly packed in wooden box with sliding lid

PROXXONcolor> 24262 Precision V-blocks, 2 pieces Features: Used to clamp various work pieces Made from hardened steel, precision ground in pairs Four different depths of prism incisions V, all at 90° Size 50 x 30 x 30mm The solid clamp and knurled knob ensure superb securing of the workpiece Supplied in a wooden box with sliding lid

PROXXONcolor> 24264 Dividing head for MICRO miller MF 70 and KT 70 Features: For machining circular work pieces, manufacturing off-set holes and milled out portions, milling key surfaces, four-sided, sixsided materials, etc. Absolute accurate division due to nonius at the base body With reversed chuck jaws: Capacity inside 1.5 to 32mm, outside 12 to 65mm Bore of 11mm (for processing longer spindles in a vertical position) With fastening bores for horizontal and vertical mounting and suitable slot nuts and fastening screws for mounting to the MICRO miller MF 70 and the MICRO compound table KT 70 Size 72 x 64 x 38mm In wooden box with sliding lid

PROXXONcolor> 24266 14-piece parallel supports set Features: Ground in pairs For adjusting work on drilling machines, lathes and milling machines Made of high-alloy, hardened steel (58 - 62 HRC) Parallel accuracy 0.02 mm 2 each of 8 x 10, 15, 20, 25, 30, 35 and 40mm Length 100mm Packed in a wooden box

Proxxon 24326 Automatic universal axial feed AV/E   For even milling with automatic feed. Switchable to manual operation. For the X axis of the Miller FF 500/BL. Will also fit the predecessor compound table KT 400 and the Miller FF 400. Simple assembly: The unit is mounted to the compound table with two bolts and automatically drives the spindle of the X-axis. For manual operation the handwheel needs to be mounted on the spindle of the drive-axis. Balanced special DC motor with electronic speed control (full-wave electronics). Manual drive with freewheeling function and two speed levels: Stage 1 for common machining (20 - 75mm/min). Stage 2: for machining at higher speed or quick adjustment of the X axis (90 – 260mm/min). Freewheeling function for manual operation by handwheel.   Technical data: 230V. 100W. 50/60Hz. Spindle speeds 10 - 130rpm. Dimensions: H 120, W 170, D 210mm. Weight 3.5kg. Insulated to Class 1. NO 24 326 Note: The depicted miller not included in the scope of delivery.

Proxxon 24350 MICRO Miller FF 500/BL   Features: Quiet and vibration-free with high precision (accuracy 0.05mm) Made in Europe Variable speed pre-selection from 200 - 4,000rpm Clearly legible 4-digit speed display for optimum machining The sophisticated control via rotor position and speed sensors guarantees high torque for use of large milling cutters in the lower speed range Solid column with dovetail guides. Milling head can be rotated to the left and right by 90° (with degree graduation) The clampable spindle sleeve is prepared for mounting of the fine feed adapter NO 24 254li> Tool holder using multiple range collets type ER 20 (EIN 6499-B): One each of 6 - 8 - 10 and 12mm are included Height adjustment of milling head via hand wheel Solid plane-milled steel compound table with 3 continuous MICROMOT standard T-slots (12 x 6 x 5mm) All 3 hand wheels with graduated scale ring (1 rev. = 2mm) Note: Clamping jaws, miller and work pieces are not included in the scope of delivery Technical features: Power supply: 220 - 240 V / 50/60 Hz Spindle speeds 200 - 4,000rpm Throat: 125mm Sleeve stroke: 30mm Column: 120 x 100 x 430mm Table: 400 x 125mm Traverse range: vertical (Z-axis) 220mm, transverse (X-axis) 310mm, depth (Y-axis) 100mm Dimensions: H = 750mm, W = 550mm, D = 550mm Weight approx. 47kg

PROXXONcolor> 24434 Edge finder set Features: Used for fast and accurate location of starting point of work pieces with respect to the machine spindle on milling machines Size 6 x 6 x 50mm and 6 x 5 x 75mm Neatly packed in a wooden box

PROXXONcolor> 24520 HSS boring tool set, 6 pieces Features: One each cutter for 60 degree (metric) and 55 degree (Whitworth) inside threads, 1.3mm - 2.65mm and 4mm Shaft of Ø 6mm Length 95mm The cutters are held by a tool holder that mounts to the tool post of either the PD 230/E or PD 400 Comes in a wooden box

PROXXON color> 24524 Cutting tool set for precision lathe FD 150/E, 6x6x65 mm, 6-piece Made of high-quality cobalt HSS steel, ground Features: One each boring, roughing out, parting, finishing, right and left cutter Size 6 x 6 x 65mm For FD 150/E Supplied in wooden box