Stahlwille 730/12 QUICK Torque wrench service MANOSKOP Model 730/12 Quick Measuring r. 25-130N·m Tool holders 14 x 18 mm L. 410mm Features:click-type with a dual stop signalDisplay deviation: ±4 %no resetting to "0" requiredthe measuring element is only loaded during the tightening processwith mount for interchangeable insert/shell toolsQuickRelease safety locksliding adjustment knob for quick torque settingarrow-shaped pointersnon-slip adjustment element with thumb recessdual stop signaldual scale N-m/ft-lb or N-m/in-lbOn request also available as N-m version only without double scaleErgonomic 2-component handleLeft-hand tightening by turning the insert/shell toolsTrigger mechanism insensitive to further and counter loadWith calibration certificateCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706Easy adjustment using two adjustment pointsCertificate in accordance with DIN EN ISO 6789-2:2017 Technical features:Scale division N·m: 2,5 N·mScale division ft·lb: 2,5 ft·lbMeasuring range N·m: 25-130 N·mMeasuring range ft·lb: 20-95 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Size: 12 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 410 mmLF: 390 mmSF: 25 mmWeight: 1074 gWeigth kg: 1.07 kgStahlwille 730/12 QUICKStahlwille product no: 50184012EAN: 4018754268863 

Stahlwille 730/20 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 40-200N·m Tool holders 14 x 18 mm L. 467mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division N·m: 10 N·mScale division ft·lb: 5 ft·lbMeasuring range N·m: 40-200 N·mMeasuring range ft·lb: 30-150 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 1 N·m Weight with box: 1890 gSize: 20 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 467 mmLF: 424,5 mmMA N·m: 40 N·mNominal value N·m: 200 N·mSF: 25 mmWeight: 1266 gWeigth kg: 1.89 kgStahlwille 730/20 FIXStahlwille product no: 96503020EAN: 4018754269464 

Stahlwille 730/20 QUICK Torque wrench service MANOSKOP Model 730/20 Quick Measuring r. 40-200N·m Tool holders 14 x 18 mm L. 455mm Features:click-type with a dual stop signalDisplay deviation: ±4 %no resetting to "0" requiredthe measuring element is only loaded during the tightening processwith mount for interchangeable insert/shell toolsQuickRelease safety locksliding adjustment knob for quick torque settingarrow-shaped pointersnon-slip adjustment element with thumb recessdual stop signaldual scale N-m/ft-lb or N-m/in-lbOn request also available as N-m version only without double scaleErgonomic 2-component handleLeft-hand tightening by turning the insert/shell toolsTrigger mechanism insensitive to further and counter loadWith calibration certificateCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706Easy adjustment using two adjustment pointsCertificate in accordance with DIN EN ISO 6789-2:2017 Technical features:Scale division N·m: 5 N·mScale division ft·lb: 5 ft·lbMeasuring range N·m: 40-200 N·mMeasuring range ft·lb: 30-145 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Size: 20 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 455 mmLF: 435 mmSF: 25 mmWeight: 1310 gWeigth kg: 1.240 kgStahlwille 730/20 QUICKStahlwille product no: 50184020EAN: 4018754268870 

Stahlwille 730/40 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 80-400N·m Tool holders 14 x 18 mm L. 607mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division N·m: 20 N·mScale division ft·lb: 10 ft·lbMeasuring range N·m: 80-400 N·mMeasuring range ft·lb: 60-300 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 2 N·m Weight with box: 2444 gSize: 40 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 607 mmLF: 564,5 mmMA N·m: 80 N·mNominal value N·m: 400 N·mSF: 25 mmWeight: 1666 gWeigth kg: 2.44 kgStahlwille 730/40 FIXStahlwille product no: 96503040EAN: 4018754269471 

Stahlwille 730/40 QUICK Torque wrench service MANOSKOP Model 730/40 Quick Measuring r. 80-400N·m Tool holders 14 x 18 mm L. 590mm Features:click-type with a dual stop signalDisplay deviation: ±4 %no resetting to "0" requiredthe measuring element is only loaded during the tightening processwith mount for interchangeable insert/shell toolsQuickRelease safety locksliding adjustment knob for quick torque settingarrow-shaped pointersnon-slip adjustment element with thumb recessdual stop signaldual scale N-m/ft-lb or N-m/in-lbOn request also available as N-m version only without double scaleErgonomic 2-component handleLeft-hand tightening by turning the insert/shell toolsTrigger mechanism insensitive to further and counter loadWith calibration certificateCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706Easy adjustment using two adjustment pointsCertificate in accordance with DIN EN ISO 6789-2:2017 Technical features:Scale division N·m: 10 N·mScale division ft·lb: 10 ft·lbMeasuring range N·m: 80-400 N·mMeasuring range ft·lb: 60-300 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Size: 40 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 590 mmLF: 570 mmSF: 25 mmWeight: 1540 gWeigth kg: 1.720 kgStahlwille 730/40 QUICKStahlwille product no: 50184040EAN: 4018754268887 

Stahlwille 730/5 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 10-50N·m Tool holders 9 x 12 mm L. 330mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division N·m: 5 N·mScale division ft·lb: 1 ft·lbMeasuring range N·m: 10-50 N·mMeasuring range ft·lb: 7-37 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 0,25 N·m Weight with box: 1632 gSize: 5 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 330 mmLF: 280,5 mmMA N·m: 10 N·mNominal value N·m: 50 N·mSF: 17,5 mmWeight: 828 gWeigth kg: 1.420 kgStahlwille 730/5 FIXStahlwille product no: 96503005EAN: 4018754269433 

Stahlwille 730/5 QUICK Torque wrench service MANOSKOP Model 730/5 Quick Measuring r. 6-50N·m Tool holders 9 x 12 mm L. 315mm Features:click-type with a dual stop signalDisplay deviation: ±4 %no resetting to "0" requiredthe measuring element is only loaded during the tightening processwith mount for interchangeable insert/shell toolsQuickRelease safety locksliding adjustment knob for quick torque settingarrow-shaped pointersnon-slip adjustment element with thumb recessdual stop signaldual scale N-m/ft-lb or N-m/in-lbOn request also available as N-m version only without double scaleErgonomic 2-component handleLeft-hand tightening by turning the insert/shell toolsTrigger mechanism insensitive to further and counter loadWith calibration certificateCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706Easy adjustment using two adjustment pointsCertificate in accordance with DIN EN ISO 6789-2:2017 Technical features:Scale division N·m: 2 N·mScale division ft·lb: 1 ft·lbMeasuring range N·m: 6-50 N·mMeasuring range ft·lb: 5-36 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Size: 5 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 315 mmLF: 288 mmSF: 17,5 mmWeight: 780 gWeigth kg: 0.780 kgStahlwille 730/5 QUICKStahlwille product no: 50184005EAN: 4018754268856 

Stahlwille 730/65 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 130-650N·m Tool holders 14 x 18 mm L. 890mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division N·m: 50 N·mScale division ft·lb: 20 ft·lbMeasuring range N·m: 130-650 N·mMeasuring range ft·lb: 100-480 ft·lbWidth mm (b): 30,6 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 2,5 N·m Weight with box: 6500 gSize: 65 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 25,6 mmLength mm (L): 890 mmLF: 848 mmMA N·m: 130 N·mNominal value N·m: 650 N·mSF: 25 mmWeight: 3242 gWeigth kg: 6.5 kgStahlwille 730/65 FIXStahlwille product no: 96503065EAN: 4018754269655 

Stahlwille 730/65 QUICK Torque wrench service MANOSKOP Model 730/65 Quick Measuring r. 130-650N·m Tool holders 14 x 18 mm L. 875mm Features:click-type with a dual stop signalDisplay deviation: ±4 %no resetting to "0" requiredthe measuring element is only loaded during the tightening processwith mount for interchangeable insert/shell toolsQuickRelease safety locksliding adjustment knob for quick torque settingarrow-shaped pointersnon-slip adjustment element with thumb recessdual stop signaldual scale N-m/ft-lb or N-m/in-lbOn request also available as N-m version only without double scaleErgonomic 2-component handleLeft-hand tightening by turning the insert/shell toolsTrigger mechanism insensitive to further and counter loadWith calibration certificateCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706Easy adjustment using two adjustment pointsCertificate in accordance with DIN EN ISO 6789-2:2017 Technical features:Scale division N·m: 20 N·mScale division ft·lb: 20 ft·lbMeasuring range N·m: 130-650 N·mMeasuring range ft·lb: 100-480 ft·lbWidth mm (b): 30,6 mmDIN: DIN EN ISO 6789-2:2017 Size: 65 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 25,6 mmLength mm (L): 875 mmLF: 855 mmSF: 25 mmWeight: 3192 gWeigth kg: 3.19 kgStahlwille 730/65 QUICKStahlwille product no: 50184065EAN: 4018754268894 

Stahlwille 730/80 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 160-800N·m Tool holders 22 x 28 mm L. 1178mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division N·m: 100 N·mScale division ft·lb: 25 ft·lbMeasuring range N·m: 160-800 N·mMeasuring range ft·lb: 120-600 ft·lbWidth mm (b): 30,6 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 5 N·m Weight with box: 10500 gSize: 80 Size square socket [inside square drive]: 22 x 28 mmHeight mm (h): 25,6 mmLength mm (L): 1178 mmLF: 1167 mmMA N·m: 160 N·mNominal value N·m: 800 N·mSF: 55 mmWeight: 4794 gWeigth kg: 10.5 kgStahlwille 730/80 FIXStahlwille product no: 96503080EAN: 4018754269662 

Stahlwille 730/80 Torque wrench service MANOSKOP Model 730/80 Measuring r. 160-800N·m Tool holders L. 970mm Features: With shell adaptor no. 7370/80, all 14 x 18 mm insert tools can also be used (max. 650 N-m) Supplied in textile bag Technical features:Scale division N·m: 20 N·mScale division ft·lb: 20 ft·lbMeasuring range N·m: 160-800 N·mMeasuring range ft·lb: 120-600 ft·lbExternal square drive (mm): 24,5 x 28 mmWidth mm (b): 46 mmHeight mm (h): 43 mmLength mm (L): 970 mmLF: 990 mmSF: 95 mmWeight: 4925 gWeigth kg: 4.93 kgStahlwille 730/80Stahlwille product no: 50180080EAN: 4018754114764 

Stahlwille 730A/10 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 180-900in lb  Tool holders 9 x 12 mm L. 386mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division in·lb: 100 in·lbScale division ft·lb: 2,5 ft·lbMeasuring range ft·lb: 15-75 ft·lbMeasuring range in·lb: 180-900 in·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 5 in·lb Weight with box: 1790 gSize: a/10 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 386 mmLF: 336 mmSF: 17,5 mmWeight: 988 gWeigth kg: 1.790 kgStahlwille 730A/10 FIXStahlwille product no: 96583010EAN: 4018754269792 

Stahlwille 730A/10 QUICK Torque wrench service MANOSKOP Model 730a/10 Quick Measuring r. 180-880in lb  Tool holders 9 x 12 mm L. 370mm Features:click-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lock (size 5-65)flash adjustment via easy-to-operate clamping lever in the handle (size 5-65)ergonomically shaped, non-slip adjustment element with thumb recess optimised ball handle for fatigue-free workingDual stop signalDual scale N-m/ft-lb or N-m/in-lb (size 5-80)On request, also available as an N-m version only without double scale (size 5-65)Left-hand tightening by turning the insert/shell toolsContinued load after click-type operation or loads against the functional direction, e.g. in the case of tight screws, have an effect. with tight screws, do not affect the release mechanism, which is thus protected from damageCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017Display deviation ±4 % Technical features:Scale division N·m: 2,5 N·mScale division in·lb: 20 in·lbMeasuring range N·m: 20-100 N·mMeasuring range in·lb: 180-880 in·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Size: a/10 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 370 mmLF: 343 mmSF: 17,5 mmWeight: 934 gWeigth kg: 0.93 kgStahlwille 730A/10 QUICKStahlwille product no: 50584010EAN: 4018754268986 

Stahlwille 730A/12 QUICK Torque wrench service MANOSKOP Model 730a/12 Quick Measuring r. 225-1150in lb  Tool holders 14 x 18 mm L. 410mm Features:click-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lock (size 5-65)flash adjustment via easy-to-operate clamping lever in the handle (size 5-65)ergonomically shaped, non-slip adjustment element with thumb recess optimised ball handle for fatigue-free workingDual stop signalDual scale N-m/ft-lb or N-m/in-lb (size 5-80)On request, also available as an N-m version only without double scale (size 5-65)Left-hand tightening by turning the insert/shell toolsContinued load after click-type operation or loads against the functional direction, e.g. in the case of tight screws, have an effect. with tight screws, do not affect the release mechanism, which is thus protected from damageCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017Display deviation ±4 % Technical features:Scale division N·m: 2,5 N·mScale division in·lb: 25 in·lbMeasuring range N·m: 25-130 N·mMeasuring range in·lb: 225-1150 in·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Size: a/12 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 410 mmLF: 390 mmSF: 25 mmWeight: 1076 gWeigth kg: 1.08 kgStahlwille 730A/12 QUICKStahlwille product no: 50584012EAN: 4018754268993 

Stahlwille 730A/20 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 350-1800in lb  Tool holders 14 x 18 mm L. 467mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division in·lb: 100 in·lbScale division ft·lb: 5 ft·lbMeasuring range ft·lb: 30-150 ft·lbMeasuring range in·lb: 350-1800 in·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 10 in·lb Weight with box: 2072 gSize: a/20 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 467 mmLF: 424,5 mmSF: 25 mmWeight: 1066 gWeigth kg: 2.07 kgStahlwille 730A/20 FIXStahlwille product no: 96583020EAN: 4018754269808 

Stahlwille 730A/20 QUICK Torque wrench service MANOSKOP Model 730a/20 Quick Measuring r. 350-1750in lb  Tool holders 14 x 18 mm L. 455mm Features:click-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lock (size 5-65)flash adjustment via easy-to-operate clamping lever in the handle (size 5-65)ergonomically shaped, non-slip adjustment element with thumb recess optimised ball handle for fatigue-free workingDual stop signalDual scale N-m/ft-lb or N-m/in-lb (size 5-80)On request, also available as an N-m version only without double scale (size 5-65)Left-hand tightening by turning the insert/shell toolsContinued load after click-type operation or loads against the functional direction, e.g. in the case of tight screws, have an effect. with tight screws, do not affect the release mechanism, which is thus protected from damageCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017Display deviation ±4 % Technical features:Scale division N·m: 5 N·mScale division in·lb: 50 in·lbMeasuring range N·m: 40-200 N·mMeasuring range in·lb: 350-1750 in·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Size: a/20 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 455 mmLF: 435 mmSF: 25 mmWeight: 1216 gWeigth kg: 1.22 kgStahlwille 730A/20 QUICKStahlwille product no: 50584020EAN: 4018754269006 

Stahlwille 730A/40 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 800-3600in lb  Tool holders 14 x 18 mm L. 607mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division in·lb: 100 in·lbScale division ft·lb: 20 ft·lbMeasuring range ft·lb: 60-300 ft·lbMeasuring range in·lb: 800-3600 in·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 2 ft·lb Weight with box: 2614 gSize: a/40 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 607 mmLF: 564,5 mmSF: 25 mmWeight: 1670 gWeigth kg: 2.61 kgStahlwille 730A/40 FIXStahlwille product no: 96583040EAN: 4018754269815 

Stahlwille 730A/5 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 90-450in lb  Tool holders 9 x 12 mm L. 330mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division in·lb: 50 in·lbScale division ft·lb: 1 ft·lbMeasuring range ft·lb: 7-37 ft·lbMeasuring range in·lb: 90-450 in·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 2,5 in·lb Weight with box: 1638 gSize: a/5 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 330 mmLF: 280,5 mmSF: 17,5 mmWeight: 832 gWeigth kg: 1.64 kgStahlwille 730A/5 FIXStahlwille product no: 96583005EAN: 4018754269785 

Stahlwille 730A/5 QUICK Torque wrench service MANOSKOP Model 730a/5 Quick Measuring r. 50-440in lb  Tool holders 9 x 12 mm L. 315mm Features:click-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lock (size 5-65)flash adjustment via easy-to-operate clamping lever in the handle (size 5-65)ergonomically shaped, non-slip adjustment element with thumb recess optimised ball handle for fatigue-free workingDual stop signalDual scale N-m/ft-lb or N-m/in-lb (size 5-80)On request, also available as an N-m version only without double scale (size 5-65)Left-hand tightening by turning the insert/shell toolsContinued load after click-type operation or loads against the functional direction, e.g. in the case of tight screws, have an effect. with tight screws, do not affect the release mechanism, which is thus protected from damageCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017Display deviation ±4 % Technical features:Scale division N·m: 2 N·mScale division in·lb: 10 in·lbMeasuring range N·m: 6-50 N·mMeasuring range in·lb: 50-440 in·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Size: a/5 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 315 mmLF: 288 mmSF: 17,5 mmWeight: 780 gWeigth kg: 0.780 kgStahlwille 730A/5 QUICKStahlwille product no: 50584005EAN: 4018754268979 

Stahlwille 730D/10 Torque wrench service/series MANOSKOP Model 730D Measuring r. 10-100N·m Drive L. 467mm Features:Tactile and audible release signalMount for interchangeable insert/shell toolsQuickRelease safety lockquick setting via practical keypadautomatically correct tightening torque after entering a deviating gaugeoverload protection thanks to acoustic and visual warning signalno unintentional adjustment thanks to automatic key lockdisplay function even with counter-clockwise torquesunits of measurement: N-m, ft-lb, in-lbDifferent tolerance limits can be set depending on the tightening operationOptical evaluation of the tightening operation by green and red indication on the displayAdditional protection of the default settings (function mode, click-type or setpoint value, unit of measurement, tolerance value, saving, deviating gauge) by PIN codeSaving of up to 7. 500 screwdriving dataUSB interfaceautomatic notification of the next calibration dateCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 77062-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Certified in accordance with DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a sheet steel case)PatentedSupplied with 2 mignon batteries 1.5 V. Mignon NiMH batteries AA/LR6, 1.2 V, can be used.Display deviation ± 2 %, ± 1 digit Technical features:Measuring range N·m: 10-100 N·mMeasuring range ft·lb: 7,4-75 ft·lbMeasuring range in·lb: 90-900 in·lbSetting display resolution N·m: 0,2/0,1 N·mSetting display resolution ft·lb: 0,2/0,1 ft·lbSetting display resolution in·lb: 2/1,0 in·lbBattery type: Mignon (AA) 1,5V Width mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 1510 gSize: 10 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 467 mmLF: 426,5 mmMA N·m: 10 N·mNominal value N·m: 100 N·mSF: 17,5 mmStahlwille 730D/10Stahlwille product no: 96501710EAN: 4018754180318 

Stahlwille 730D/100 Torque wrench service/series MANOSKOP Model 730D Measuring r. 100-1000N·m Drive L. 1344mm Features:Tactile and audible release signalMount for interchangeable insert/shell toolsQuickRelease safety lockquick setting via practical keypadautomatically correct tightening torque after entering a deviating gaugeoverload protection thanks to acoustic and visual warning signalno unintentional adjustment thanks to automatic key lockdisplay function even with counter-clockwise torquesunits of measurement: N-m, ft-lb, in-lbDifferent tolerance limits can be set depending on the tightening operationOptical evaluation of the tightening operation by green and red indication on the displayAdditional protection of the default settings (function mode, click-type or setpoint value, unit of measurement, tolerance value, saving, deviating gauge) by PIN codeSaving of up to 7. 500 screwdriving dataUSB interfaceautomatic notification of the next calibration dateCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 77062-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Certified in accordance with DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a sheet steel case)PatentedSupplied with 2 mignon batteries 1.5 V. Mignon NiMH batteries AA/LR6, 1.2 V, can be used.Display deviation ± 2 %, ± 1 digit Technical features:Measuring range N·m: 100-1000 N·mMeasuring range ft·lb: 74-750 ft·lbMeasuring range in·lb: 900-9000 in·lbSetting display resolution N·m: 1,0/1,0 N·mSetting display resolution ft·lb: 1,0/1,0 ft·lbSetting display resolution in·lb: 10/1,0 in·lbBattery type: Mignon (AA) 1,5V Width mm (b): 30,6 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 11000 gSize: 100 Size square socket [inside square drive]: 22 x 28 mmHeight mm (h): 25,6 mmLength mm (L): 1344 mmLF: 1341 mmMA N·m: 100 N·mNominal value N·m: 1000 N·mSF: 55 mmStahlwille 730D/100Stahlwille product no: 96502100EAN: 4018754240104 

Stahlwille 730D/20 Torque wrench service/series MANOSKOP Model 730D Measuring r. 20-200N·m Drive L. 548mm Features:Tactile and audible release signalMount for interchangeable insert/shell toolsQuickRelease safety lockquick setting via practical keypadautomatically correct tightening torque after entering a deviating gaugeoverload protection thanks to acoustic and visual warning signalno unintentional adjustment thanks to automatic key lockdisplay function even with counter-clockwise torquesunits of measurement: N-m, ft-lb, in-lbDifferent tolerance limits can be set depending on the tightening operationOptical evaluation of the tightening operation by green and red indication on the displayAdditional protection of the default settings (function mode, click-type or setpoint value, unit of measurement, tolerance value, saving, deviating gauge) by PIN codeSaving of up to 7. 500 screwdriving dataUSB interfaceautomatic notification of the next calibration dateCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 77062-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Certified in accordance with DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a sheet steel case)PatentedSupplied with 2 mignon batteries 1.5 V. Mignon NiMH batteries AA/LR6, 1.2 V, can be used.Display deviation ± 2 %, ± 1 digit Technical features:Measuring range N·m: 20-200 N·mMeasuring range ft·lb: 15-150 ft·lbMeasuring range in·lb: 180-1800 in·lbSetting display resolution N·m: 0,5/0,1 N·mSetting display resolution ft·lb: 0,5/0,1 ft·lbSetting display resolution in·lb: 5/1,0 in·lbBattery type: Mignon (AA) 1,5V Width mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 1896 gSize: 20 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 548 mmLF: 515 mmMA N·m: 20 N·mNominal value N·m: 200 N·mSF: 25 mmStahlwille 730D/20Stahlwille product no: 96501720EAN: 4018754180325 

Stahlwille 730D/40 Torque wrench service/series MANOSKOP Model 730D Measuring r. 40-400N·m Drive L. 688mm Features:Tactile and audible release signalMount for interchangeable insert/shell toolsQuickRelease safety lockquick setting via practical keypadautomatically correct tightening torque after entering a deviating gaugeoverload protection thanks to acoustic and visual warning signalno unintentional adjustment thanks to automatic key lockdisplay function even with counter-clockwise torquesunits of measurement: N-m, ft-lb, in-lbDifferent tolerance limits can be set depending on the tightening operationOptical evaluation of the tightening operation by green and red indication on the displayAdditional protection of the default settings (function mode, click-type or setpoint value, unit of measurement, tolerance value, saving, deviating gauge) by PIN codeSaving of up to 7. 500 screwdriving dataUSB interfaceautomatic notification of the next calibration dateCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 77062-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Certified in accordance with DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a sheet steel case)PatentedSupplied with 2 mignon batteries 1.5 V. Mignon NiMH batteries AA/LR6, 1.2 V, can be used.Display deviation ± 2 %, ± 1 digit Technical features:Measuring range N·m: 40-400 N·mMeasuring range ft·lb: 30-300 ft·lbMeasuring range in·lb: 360-3600 in·lbSetting display resolution N·m: 1,0/0,1 N·mSetting display resolution ft·lb: 1,0/0,1 ft·lbSetting display resolution in·lb: 10/1,0 in·lbBattery type: Mignon (AA) 1,5V Width mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 5155 gSize: 40 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 688 mmLF: 655 mmMA N·m: 40 N·mNominal value N·m: 400 N·mSF: 25 mmStahlwille 730D/40Stahlwille product no: 96501740EAN: 4018754180332 

Stahlwille 730D/65 Torque wrench service/series MANOSKOP Model 730D Measuring r. 65-650N·m Drive L. 870mm Features:Tactile and audible release signalMount for interchangeable insert/shell toolsQuickRelease safety lockquick setting via practical keypadautomatically correct tightening torque after entering a deviating gaugeoverload protection thanks to acoustic and visual warning signalno unintentional adjustment thanks to automatic key lockdisplay function even with counter-clockwise torquesunits of measurement: N-m, ft-lb, in-lbDifferent tolerance limits can be set depending on the tightening operationOptical evaluation of the tightening operation by green and red indication on the displayAdditional protection of the default settings (function mode, click-type or setpoint value, unit of measurement, tolerance value, saving, deviating gauge) by PIN codeSaving of up to 7. 500 screwdriving dataUSB interfaceautomatic notification of the next calibration dateCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 77062-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Certified in accordance with DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a sheet steel case)PatentedSupplied with 2 mignon batteries 1.5 V. Mignon NiMH batteries AA/LR6, 1.2 V, can be used.Display deviation ± 2 %, ± 1 digit Technical features:Measuring range N·m: 65-650 N·mMeasuring range ft·lb: 48-480 ft·lbMeasuring range in·lb: 580-5800 in·lbSetting display resolution N·m: 1,0/0,1 N·mSetting display resolution ft·lb: 1,0/0,1 ft·lbSetting display resolution in·lb: 10/1,0 in·lbBattery type: Mignon (AA) 1,5V Width mm (b): 30,6 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 6000 gSize: 65 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 25,6 mmLength mm (L): 870 mmLF: 837 mmMA N·m: 65 N·mNominal value N·m: 650 N·mSF: 25 mmStahlwille 730D/65Stahlwille product no: 96501765EAN: 4018754187621