Stahlwille 714R/65 Angle and torque wrench MANOSKOP Model 714R Measuring r. 65-650N·m Drive 3/4 L. 980mm Features:with reversible ratchet (sizes 1-4), fine-tooth reversible ratchet (sizes 6-65) or insert ratchet with square drive-through (sizes 80-100) 80-100)4 measuring modes (torque, angle of rotation, torque with monitoring parameter "angle of rotation", angle of rotation with monitoring parameter "torque")High-resolution colour OLED display and lateral signal lightsOptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2,500 screwdriving operations incl. date and time stamp date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge correction: option to enter a deviating gauge to ensure the desired target valueimmediately ready for use again after relieffor controlled right-hand and left-hand tightening (size 1-65); for left-hand tightening in "click-type" function mode, the insert tool must be rotated (size 80-100)Optical, acoustic and tactile release signalTorque and rotation angle displays visible simultaneouslyMeasurement independent of the force application point (for sizes 1, 2 and 4)Safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 65-650 N·mMeasuring range ft·lb: 48-480 ft·lbMeasuring range in·lb: 580-5800 in·lbExternal square drive (inch): 3/4 Battery type: Micro (AAA) 1,5V Width mm (b): 125 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 9000 gSize: 65 Size square socket [inside square drive]: 22 x 28 mmHeight mm (h): 95 mmLength mm (L): 980 mmWeight: 5137 gWeigth kg: 8.5 kgStahlwille 714R/65Stahlwille product no: 96501065EAN: 4018754212781
Stahlwille 714R/80 Angle and torque wrench MANOSKOP Model 714R Measuring r. 80-800N·m Drive 3/4 L. 1253mm Features:with reversible ratchet (sizes 1-4), fine-tooth reversible ratchet (sizes 6-65) or insert ratchet with square drive-through (sizes 80-100) 80-100)4 measuring modes (torque, angle of rotation, torque with monitoring parameter "angle of rotation", angle of rotation with monitoring parameter "torque")High-resolution colour OLED display and lateral signal lightsOptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2,500 screwdriving operations incl. date and time stamp date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge correction: option to enter a deviating gauge to ensure the desired target valueimmediately ready for use again after relieffor controlled right-hand and left-hand tightening (size 1-65); for left-hand tightening in "click-type" function mode, the insert tool must be rotated (size 80-100)Optical, acoustic and tactile release signalTorque and rotation angle displays visible simultaneouslyMeasurement independent of the force application point (for sizes 1, 2 and 4)Safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 80-800 N·mMeasuring range ft·lb: 60-600 ft·lbMeasuring range in·lb: 720-7200 in·lbExternal square drive (inch): 3/4 Battery type: Micro (AAA) 1,5V Width mm (b): 130 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 12300 gSize: 80 Size square socket [inside square drive]: 22 x 28 mmHeight mm (h): 95 mmLength mm (L): 1253 mmWeight: 6487 gWeigth kg: 5.9 kgStahlwille 714R/80Stahlwille product no: 96501080EAN: 4018754212798
Stahlwille 71AR/80 Torque wrench Model 71AR/80 Measuring r. 160-800N·m Drive 3/4 L. 1152mm Features: indicating trailing indicator dial double scale N-m/ft-lb scale dial made of luminescent, yellow special foil for clear recognition of the display even in poor visibility Dial indicator secured by additional protective ring Handle with integrated force equalisation mechanism Not for left-hand measurements Calibration with perfectControl calibration device no. 7794 or calibration system no. 7706. Readjustment without disassembly if necessary With certificate Delivered in textile bag Display deviation ± 4 % Technical features:Scale division N·m: 10 N·mScale division ft·lb: 10 ft·lbMeasuring range N·m: 160-800 N·mMeasuring range ft·lb: 100-600 ft·lbExternal square drive (inch): 3/4 Width mm (b): 70 mmHeight mm (h): 30 mmLength mm (L): 1152 mmLF: 1060 mmWeight: 4900 gWeigth kg: 4.9 kgStahlwille 71AR/80Stahlwille product no: 50450080EAN: 4018754124930
Stahlwille 721/15 QUICK Torque wrench MANOSKOP Model 721/15 Quick Measuring r. 30-150N·m Drive 1/2 L. 452mm Features:click-typeno need to reset to "0" as measuring element is only loaded during the tightening processflash adjustment via easy-to-operate clamping lever in the handleergonomically shaped, non-slip adjustment element with thumb recessOptimised ball handle for fatigue-free workingDual stop signalDouble scale N-m/ft-lbContinued load after click-type operation or loads against the functional direction, e.g. in the case of tight screws Protection of all sensitive parts by the sturdy tubular steel housingCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706. Readjustment without disassembly if necessary.Certificate in accordance with DIN EN ISO 6789-2:2017Display deviation ± 4 % Technical features:Scale division N·m: 5 N·mScale division ft·lb: 5 ft·lbMeasuring range N·m: 30-150 N·mMeasuring range ft·lb: 25-110 ft·lbExternal square drive (inch): 1/2 b1: 28 mmb2: 41 mmDIN: DIN EN ISO 6789-2:2017 Size: 15 Height mm (h1): 23 mmHeight mm (h2): 18 mmLength mm (L): 452 mmLF: 387 mmMA N·m: 30 N·mNominal value N·m: 150 N·mWeight: 1282 gWeigth kg: 1.28 kgStahlwille 721/15 QUICKStahlwille product no: 50204015EAN: 4018754268924
Stahlwille 721/20 QUICK Torque wrench MANOSKOP Model 721/20 Quick Measuring r. 40-200N·m Drive 1/2 L. 483mm Features:click-typeno need to reset to "0" as measuring element is only loaded during the tightening processflash adjustment via easy-to-operate clamping lever in the handleergonomically shaped, non-slip adjustment element with thumb recessOptimised ball handle for fatigue-free workingDual stop signalDouble scale N-m/ft-lbContinued load after click-type operation or loads against the functional direction, e.g. in the case of tight screws Protection of all sensitive parts by the sturdy tubular steel housingCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706. Readjustment without disassembly if necessary.Certificate in accordance with DIN EN ISO 6789-2:2017Display deviation ± 4 % Technical features:Scale division N·m: 5 N·mScale division ft·lb: 5 ft·lbMeasuring range N·m: 40-200 N·mMeasuring range ft·lb: 30-145 ft·lbExternal square drive (inch): 1/2 b1: 28 mmb2: 41 mmDIN: DIN EN ISO 6789-2:2017 Size: 20 Height mm (h1): 23 mmHeight mm (h2): 18 mmLength mm (L): 483 mmLF: 418 mmMA N·m: 40 N·mNominal value N·m: 200 N·mWeight: 1349 gWeigth kg: 1.35 kgStahlwille 721/20 QUICKStahlwille product no: 50204020EAN: 4018754268931
Stahlwille 721/30 QUICK Torque wrench MANOSKOP Model 721/30 Quick Measuring r. 60-300N·m Drive 1/2 L. 553mm Features:click-typeno need to reset to "0" as measuring element is only loaded during the tightening processflash adjustment via easy-to-operate clamping lever in the handleergonomically shaped, non-slip adjustment element with thumb recessOptimised ball handle for fatigue-free workingDual stop signalDouble scale N-m/ft-lbContinued load after click-type operation or loads against the functional direction, e.g. in the case of tight screws Protection of all sensitive parts by the sturdy tubular steel housingCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706. Readjustment without disassembly if necessary.Certificate in accordance with DIN EN ISO 6789-2:2017Display deviation ± 4 % Technical features:Scale division N·m: 10 N·mScale division ft·lb: 10 ft·lbMeasuring range N·m: 60-300 N·mMeasuring range ft·lb: 50-220 ft·lbExternal square drive (inch): 1/2 b1: 28 mmb2: 44 mmDIN: DIN EN ISO 6789-2:2017 Size: 30 Height mm (h1): 23 mmHeight mm (h2): 27,5 mmLength mm (L): 553 mmLF: 486 mmMA N·m: 60 N·mNominal value N·m: 300 N·mWeight: 1646 gWeigth kg: 1.65 kgStahlwille 721/30 QUICKStahlwille product no: 50204030EAN: 4018754268948
Stahlwille 721/5 QUICK Torque wrench MANOSKOP Model 721/5 Quick Measuring r. 6-50N·m Drive 3/8 L. 352mm Features:click-typeno need to reset to "0" as measuring element is only loaded during the tightening processflash adjustment via easy-to-operate clamping lever in the handleergonomically shaped, non-slip adjustment element with thumb recessOptimised ball handle for fatigue-free workingDual stop signalDouble scale N-m/ft-lbContinued load after click-type operation or loads against the functional direction, e.g. in the case of tight screws Protection of all sensitive parts by the sturdy tubular steel housingCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706. Readjustment without disassembly if necessary.Certificate in accordance with DIN EN ISO 6789-2:2017Display deviation ± 4 % Technical features:Scale division N·m: 2 N·mScale division ft·lb: 1 ft·lbMeasuring range N·m: 6-50 N·mMeasuring range ft·lb: 5-36 ft·lbExternal square drive (inch): 3/8 b1: 28 mmb2: 27,5 mmDIN: DIN EN ISO 6789-2:2017 Size: 5 Height mm (h1): 23 mmHeight mm (h2): 14,5 mmLength mm (L): 352 mmLF: 293 mmMA N·m: 6 N·mNominal value N·m: 50 N·mWeight: 880 gWeigth kg: 0.880 kgStahlwille 721/5 QUICKStahlwille product no: 50204005EAN: 4018754268917
Stahlwille 721NF/80 Torque wrench MANOSKOP Model 721NF/80 Measuring r. 160-800N·m Drive 3/4 L. 1051mm Features:click-typeconvenient adjustmentdual stop signaldual scale N-m/ft-lbleft-hand tightening thanks to reversible square driveprotection of all sensitive parts thanks to the sturdy steel tube in aluminium U-profilecalibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017Delivered in a textile bagDisplay deviation ± 4 % Technical features:Scale division N·m: 20 N·mScale division ft·lb: 20 ft·lbMeasuring range N·m: 160-800 N·mMeasuring range ft·lb: 120-600 ft·lbExternal square drive (inch): 3/4 b1: 46,5 mmb2: 76 mmWidth mm (b): 150 mmDIN: DIN EN ISO 6789-2:2017 Size: 80 Height mm (h): 42 mmLength mm (L): 1051 mmLF: 938 mmMA N·m: 160 N·mNominal value N·m: 800 N·mWeight: 6380 gWeigth kg: 7.1 kgStahlwille 721NF/80Stahlwille product no: 50200081EAN: 4018754031979
Stahlwille 721QR/15 QUICK Torque wrench MANOSKOP Model 721QR/15 Quick Measuring r. 30-150N·m Drive 1/2 L. 452,5mm Features:Click-typeFlash adjustment with easy-to-operate clamping lever in the handleRatchet with QuickRelease safety lockDual stop signalDual scale N-m/ft-lbNo need to reset to "0" as measuring element is only loaded during the tightening processFurther load after release or loads against the direction of operation, e.g. in the case of tight screws, have no effect. The release mechanism is protected from damage by the sturdy tubular steel housingProtection of all sensitive partsCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706. Readjustment without disassembly if necessary.with certificate in accordance with DIN EN ISO 6789-2:2017Display deviation ± 4 % Technical features:Scale division N·m: 5 N·mScale division ft·lb: 5 ft·lbMeasuring range N·m: 30-150 N·mMeasuring range ft·lb: 25-110 ft·lbExternal square drive (inch): 1/2 b1: 28 mmb2: 41 mmDIN: DIN EN ISO 6789-2:2017 Size: 15 Height mm (h1): 23 mmHeight mm (h2): 18 mmLength mm (L): 452,5 mmLF: 387 mmMA N·m: 30 N·mNominal value N·m: 150 N·mWeight: 1268 gWeigth kg: 1.27 kgStahlwille 721QR/15 QUICKStahlwille product no: 50204115EAN: 4018754268955
Stahlwille 721QR/20 QUICK Torque wrench MANOSKOP Model 721QR/20 Quick Measuring r. 40-200N·m Drive 1/2 L. 482mm Features:Click-typeFlash adjustment with easy-to-operate clamping lever in the handleRatchet with QuickRelease safety lockDual stop signalDual scale N-m/ft-lbNo need to reset to "0" as measuring element is only loaded during the tightening processFurther load after release or loads against the direction of operation, e.g. in the case of tight screws, have no effect. The release mechanism is protected from damage by the sturdy tubular steel housingProtection of all sensitive partsCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706. Readjustment without disassembly if necessary.with certificate in accordance with DIN EN ISO 6789-2:2017Display deviation ± 4 % Technical features:Scale division N·m: 5 N·mScale division ft·lb: 5 ft·lbMeasuring range N·m: 40-200 N·mMeasuring range ft·lb: 30-145 ft·lbExternal square drive (inch): 1/2 b1: 28 mmb2: 41 mmDIN: DIN EN ISO 6789-2:2017 Size: 20 Height mm (h1): 23 mmHeight mm (h2): 18 mmLength mm (L): 482 mmLF: 416,5 mmMA N·m: 40 N·mNominal value N·m: 200 N·mWeight: 1338 gWeigth kg: 1.34 kgStahlwille 721QR/20 QUICKStahlwille product no: 50204120EAN: 4018754268962
Stahlwille 725B/4 Bit ratchet insert tool Hex 1/4" Tool holders9 x 12 Features: reversible with hexagon socket, 1/4" or 5/16", DIN 3126 / ISO 1173 D 6.3 or D8 for direct mounting of 1/4" or 5/16" hexagon socket C 6.3 or C 8 (size 4: 22 teeth, size 5: 30 teeth) hexagon socket C 6.3 or C 8 (size 4: 22 teeth, size 5: 30 teeth). 5: 30 teeth) Internal hex with annular compression spring Bits are easy to insert, snap in securely and are easy to pull out again; also hex with wide groove (shape E, DIN 3126 / ISO 1173) Technical features:Number of teeth: 22 Working angle: 16.4 °Width mm (b): 22 mmDIN: DIN 3126 / ISO 1173 D 6,3 oder D8 Size: 4 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 13,6 mmInternal hex drive [inch]: 1/4 "S: 17,5 mmWeight: 54 gWeigth kg: 0.05 kgStahlwille 725B/4Stahlwille product no: 58255004EAN: 4018754140794
Stahlwille 725B/5 Bit ratchet insert tool Hex 5/16" Tool holders9 x 12 Features: reversible with hexagon socket, 1/4" or 5/16", DIN 3126 / ISO 1173 D 6.3 or D8 for direct mounting of 1/4" or 5/16" hexagon socket C 6.3 or C 8 (size 4: 22 teeth, size 5: 30 teeth) hexagon socket C 6.3 or C 8 (size 4: 22 teeth, size 5: 30 teeth). 5: 30 teeth) Internal hex with annular compression spring Bits are easy to insert, snap in securely and are easy to pull out again; also hex with wide groove (shape E, DIN 3126 / ISO 1173) Technical features:Number of teeth: 30 Working angle: 12 °Width mm (b): 29 mmDIN: DIN 3126 / ISO 1173 D 6,3 oder D8 Size: 5 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 17,9 mmInternal hex drive [inch]: 5/16 "S: 28 mmWeight: 117 gWeigth kg: 0.12 kgStahlwille 725B/5Stahlwille product no: 58255005EAN: 4018754154715
Stahlwille 730/10 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 20-100N·m Tool holders 9 x 12 mm L. 386mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division N·m: 10 N·mScale division ft·lb: 2,5 ft·lbMeasuring range N·m: 20-100 N·mMeasuring range ft·lb: 15-75 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 0,5 N·m Weight with box: 1788 gSize: 10 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 386 mmLF: 336 mmMA N·m: 20 N·mNominal value N·m: 100 N·mSF: 17,5 mmWeight: 986 gWeigth kg: 1.570 kgStahlwille 730/10 FIXStahlwille product no: 96503010EAN: 4018754269440
Stahlwille 730/10 QUICK Torque wrench service MANOSKOP Model 730/10 Quick Measuring r. 20-100N·m Tool holders 9 x 12 mm L. 370mm Features:click-type with a dual stop signalDisplay deviation: ±4 %no resetting to "0" requiredthe measuring element is only loaded during the tightening processwith mount for interchangeable insert/shell toolsQuickRelease safety locksliding adjustment knob for quick torque settingarrow-shaped pointersnon-slip adjustment element with thumb recessdual stop signaldual scale N-m/ft-lb or N-m/in-lbOn request also available as N-m version only without double scaleErgonomic 2-component handleLeft-hand tightening by turning the insert/shell toolsTrigger mechanism insensitive to further and counter loadWith calibration certificateCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706Easy adjustment using two adjustment pointsCertificate in accordance with DIN EN ISO 6789-2:2017 Technical features:Scale division N·m: 2,5 N·mScale division ft·lb: 2,5 ft·lbMeasuring range N·m: 20-100 N·mMeasuring range ft·lb: 15-72,5 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Size: 10 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 370 mmLF: 343 mmSF: 17,5 mmWeight: 936 gWeigth kg: 0.94 kgStahlwille 730/10 QUICKStahlwille product no: 50184010EAN: 4018754266203
Stahlwille 730/100 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 200-1000N·m Tool holders 22 x 28 mm L. 1363mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division N·m: 100 N·mScale division ft·lb: 25 ft·lbMeasuring range N·m: 200-1000 N·mMeasuring range ft·lb: 150-750 ft·lbWidth mm (b): 30,6 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 5 N·m Weight with box: 11000 gSize: 100 Size square socket [inside square drive]: 22 x 28 mmHeight mm (h): 25,6 mmLength mm (L): 1363 mmLF: 1352 mmMA N·m: 200 N·mNominal value N·m: 1000 N·mSF: 55 mmWeight: 5196 gWeigth kg: 11 kgStahlwille 730/100 FIXStahlwille product no: 96503100EAN: 4018754269679
Stahlwille 730/12 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 25-130N·m Tool holders 14 x 18 mm L. 421mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division N·m: 10 N·mScale division ft·lb: 2,5 ft·lbMeasuring range N·m: 25-130 N·mMeasuring range ft·lb: 20-95 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 0,5 N·m Weight with box: 1928 gSize: 12 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 421 mmLF: 379 mmMA N·m: 25 N·mNominal value N·m: 130 N·mSF: 25 mmWeight: 1124 gWeigth kg: 1.75 kgStahlwille 730/12 FIXStahlwille product no: 96503012EAN: 4018754269457
