PROXXONcolor> 24552Three piece thread cutting set, (10 x 10 x 80mm)
Features:
One cutter for external thread (ground to 60°, metric) one for internal thread, one general cutting
Supplied in wooden box with sliding lid
10 x 10 x 80mm (for PD 400)
PROXXONcolor> 24555 Cutter set with tungsten inserts for PD 230/E and PD 400 (8 x 8 x 90 mm)
Features:
Three holders (90mm long):
1: for roughing out
2: for longitudinal work
3: for 90mm boring bar, holes from 12mm
Standard tungsten inserts, 55°, plated (commercially available version)
Three additional inserts securing screw and key TX 8 are included
8 x 8mm (for PD 230/E)
PROXXONcolor> 24556 Cutter set with tungsten inserts for PD 400 (10 x 10 x 90 mm)
Features:
Three holders (90mm long):
1: for roughing out
2: for longitudinal work
3: for 90mm boring bar, holes from 12mm
Standard tungsten inserts, 55°, plated (commercially available version)
Three additional inserts securing screw and key TX 8 are included
Proxxon 24560 Offset cutter set with carbide inserts 8 x 8 x 60 mm for PD 250/E
Holder angled to the left by 45° for cylindrical carbide inserts Ø 6mm. For extra high surface quality and low surface roughness, for turning radii and cutting round grooves.
Set includes two tungsten inserts, two insert securing screws and TX 8 key.
PROXXONcolor> 24630 Three piece centre drill set, DIN 333, HSS (2,0 - 2,5 - 3,15 m)
Features:
Made of HSS steel
DIN 333 (type A), 60°
Complete set centre drills with sizes of 2.0 - 2.5 and 3.15mm
PROXXONcolor> 25262 Universal and oil siphoning pump AP 12
Perfect for effortless oil changes in 2 - 3 minutes
Features:
Easily pumps motor, diesel and heating oil
Pump capacity approx. 250l/hr (with 1/2" feed hose)
When changing oil with the wand, approx. 3l/min (40°C oil temperature)
200cm long feed line with crocodile clips for battery terminals
Feed and supply side connecting pieces for 1/2" hoses
Includes a wand (approx. 800mm long, outer diameter 6mm) for the oil dipstick shaft, permanently fitted with a reinforced hose
A 1/2" transparent outlet hose, approx. 150cm long, is supplied
Housing of glass fibre reinforced POLYAMIDE, approx. 120 x 90 x 90mm
Approx. weight 1.4kg
Note:
The wand fits all vehicles with a 6mm oil dipstick shaft
PROXXONcolor>
27006 Bench circular saw KS 230
Features:
The 58mm diameter super-cut blade cuts soft woods up to 8mm
The 85W VDE tested motor is quiet, operates off 220 - 240V and has a prolonged life expectancy
Cutting performance:
in wood up to 8mm
plastics (Pertinax too) to approx. 3mm
non-ferrous metals to approx. 1.5mm.
Even fibreglass reinforced PC cards can be cut with the tungsten blade
The side door allows easy sawdust removal
Overall size approx. 240 x 180 x 80mm
Weight approx. 1.8kg
Graduated mitre stop
Machined, die-cast aluminium table of 160 x 160mm
Quiet, high performance VDE approved motor for prolonged use
Base of ABS with a sawdust door on the right
Super-cut blade 58mm diameter, 80 teeth, individually set and sharpened, is included
Adjustable fence with scale
Important:
Power transmission by toothed belt via ball bearings, housed in sturdy casing, ensures the right blade speed for the job (approx. 5,000rpm) with a doubling of torque (approx.) Above all, it ensures good cutting depth
PROXXONcolor>
27020 MICRO woodturning lathe DB 250
Turning in miniature is a pleasing hobby:
One can make glasses, cups, saucers, vases and columns for a doll house
In model trains, one can make lighting masts, windows, tanks
Limbs for mario
nettes and hundreds of classical miniature turning tasks may be carried out with ease
The electronic speed control assists in the lower range in a ‘semi-automated’ painting process
Technical data:
Motor 220 - 240V. 100W. 50/60Hz
Centre distance of 250mm, 40mm swing
25mm swing over support
Variable speed control covering between 1,000 and 5,000rpm
Headstock spindle bore of 10mm. Tailstock travel 20mm.
Includes 6 collets (2 - 3 - 4 - 6 - 8 - 10mm)
drive centre
live centre and face plate.
PROXXONcolor> 27023 Five piece HSS chisel set
A high quality set with the most frequently used turning tools:
gouge
skew
parting tool
beading tool
scraper
Neatly packed in a wooden box
PROXXONcolor>
27024 Independent four jaw chuck for the DB 250
With individually adjustable jaws
Used to clamp asymmetrical pieces such as rectangles
The reversible jaws clamp from 1.5 – 35mm (inside) and from 14 -
67mm (outside)
The DB 250 headstock spindle of thread M16 x
1 screws directly into the chuck
PROXXONcolor>
27026 Three jaw chuck for the lathe DB 250
Used for concentric clamping
Made from steel and offering 1.5 to 32mm and 12 to 65mm
when reversing the jaws
The chuck has a M16 x 1 thread for
fitting directly to the DB 250 headstock spindle
PROXXONcolor>
27028 Drill chuck with sliding sleeve for the tailstock of the DB 250
Clamps up to 5.0mm
Is inserted on the spot of the
rotating back centre
The feed movement results from
sliding the complete tailstock
PROXXONcolor> 27040 Thicknesser DH 40
Features:
Load bearing components are all made of die-cast aluminium, with milled seats for bearings and spindles
These characterics are essential for vibration-free, smooth thicknessing of soft and hard woods
Triple-spindled table (of die-cast aluminium, flat-milled) which can be accurately adjusted to 1/10mm by handwheel (zero adjustable)
Automatic even feed with anti-kickback device: The knurled, spring-mounted infeed roller transports even irregularly shaped work pieces
A rubber-coated outfeed roller prevents marking the newly planed surface
Precision planer block with two HSS planer blades
Technical Data:
220 - 240V. 200W. 50/60Hz
Thicknessing up to 40mm thick and up to 80mm wide
Maximum depth of cut 0.8mm
Cutter speed 6,000rpm
Feed rate 4.8m/min
Table length 232mm
Weight approx. 8kg
PROXXONcolor> 27044 Abrichthobel AH 80
Merkmale:
Tragende Konstruktion aus Alu-Druckguss-Teilen mit CNC-bearbeiteten Passungen
Voraussetzung für vibrationsfreies, sauberes Hobeln von Weich- und Harthölzern
Tisch plangefräst
Rechte Tischhälfte mit Feinzustellung mittels Knebelschraube für Spanabnahme von 0 bis 0,8 mm bei einer Hobelbreite von maximal 80 mm
Verstellbarer Längsanschlag, beidseitig um 45° neigbar (Skala vorhanden)
große, kugelgelagerte Hobelwelle mit auswechselbaren Messern aus HSS
Angetrieben durch laufruhigen DC-Spezialmotor über Zahnriemen
Praktischer Frässchutz, der beim Arbeiten nicht stört Relais-Schalter mit Not-Aus-Funktion und Wiederanlaufschutz
Ein Absaugstutzen mit Adapter für Staubsauger ermöglicht sauberes Arbeiten
Inkl. Schiebestock
Technische Daten:
Spannung: 220 - 240 V, 50/60 Hz
Tisch 400 x 80 mm
Hobelbreite 80 mm
Maximale Spanabnahme (Zustelltiefe) 0,8 mm Messerdrehzahl 6.000/min
Gewicht ca. 5,5 kg
Schutzklasse 1
PROXXON 27050 MICRO shaper MP 400
Features:
For chamfering, cutting grooves, slots, recesses, radii and other profiles
For crafting picture frames and for separating
Also enables exact manufacturing of edges and longitudinal cuts (for model building, e.g. for doors, flaps and housing parts)
Powerful dust-protected motor with toothed belt drive
Double ball-bearing spindle
Tool holder with triple slit precision collets (one each of 2.4 - 3.0 and 3.2mm are included)
Milling cutter height adjustment by hand wheel
Stable aluminium table with longitudinal and angle stop as well as cutter guard
For wood, fibreboard and plastics.
Clean relief grinding for good work results and surface quality
High stability
Shafts 3.2mm
Adapter for vacuum cleaner fits standard household vacuum cleaners
Three HSS router cutters (slot cutter 3.2mm, V-slot cutter and core box bit) are included
Technical data:
220 - 240V. 100W. 50/60Hz. 25.000/min
Height adjustment with scale ring adjustable to 0 (1 revolution = 1.0, 1 graduation = 0.05mm)
Milling table 300 x 150mm
Weight approx. 2.0kg
PROXXONcolor> 27060 Disc sander TG 125/E
Features:
For all wood types, steel, non-ferrous metals, precious metals, plastics (also Plexiglas and glass-fibre reinforced plastics)
Powerful drive and vibration-free running thanks to balanced DC motor
Housing of glass-fibre reinforced POLYAMIDE
Aluminium table tilting downwards through 50°, 10° upwards, with angle stop
Planeturned sanding disc of die-cast aluminium covered with silicone film
This allows for effortless removal of sanding discs after use
Two additional square silicone films offer easy storage after use and thus re-use when needed
Machine can be secured both horizontally (with table) on the workbench, and also quickly and safely in vertical position
Suction connection and adapter to connect a vacuum cleaner for dust-free working
With each 2 sanding discs grit 80, grit 150 and grit 240
Technical data:
220 - 240V. 140W. 50/60Hz
Adjustable grinding speed of approx. 250 - 800m/min (corresponds to 1,150 - 3,600rpm)
Sanding disc ø 125mm
Table 98 x 140mm
Sanding height 62.5mm
Size 300 x 140 x 160mm
Weight approx. 3kg
PROXXON 27070 Table saw FET
Features:
For fine mechanics, model building, mould construction, toy manufacture, architects, model carpenters and fitters
For cutting wood, non-ferrous metals, plastics, Plexiglas, glass fibre reinforced sheets, foam and many other materials
Stable construction because load bearing parts and plane-milled table are made of die-cast aluminium
The micro-adjustable, precise and stable longitudinal stop provides decisive advantages: Corrections even smaller than 1/10 mm can be made after coarse adjustment using an adjusting screw
The height adjustable and 45° tiltable saw blade makes it possible to cut double mitres when used together with the angle stop
Low-noise drive using DC special motor with Optibelt toothed belts
Ball-bearinged saw blade shaft
Tungsten tipped saw blade 80 x 1.6 x 10mm (24 T)
Additional work piece pusher and non-slotted ABS sawing gap cover for tight tolerances between saw blade and table
Technical data:
220 - 240V. 7,000rpm
Mitre infinitely adjustable up to 45°
Table size 300 x 300mm
Cutting depth 1 - 22mm
Saw blades between 50 - 85mm can be used (with 10mm centre hole)
Weight approx. 6kg
PROXXONcolor>
27080 Hot wire cutter THERMOCUT 230/E
Attributes:
Ideal for architectural models, designers, decorators, artists, teaching too, prototypes as well as classical railroad, plane and boat model building
The unit's double wound transformer and insulation to class 2 ensure the cutter is absolutely safe
The cutting wire operates at 10V, 1A
The large base with 390 x 280mm table with surface of aluminium cobond compound ensures smooth and easy movement of the workpiece
The printed grid and protractor ease division and cutting
The solid aluminium overarm has a 350mm throat and offers 140mm capacity in height
The holder and wire coil (30m, 0.2mm diameter is included) may be shifted along the overarm to enable mitre cutting
A LED indicates operation and prevents burnt fingers (the cutting wire heats to maximum in less than 1 second)
The correct temperature, being material type and thickness dependent, is easily learnt
Optimum profiles are cut at lower temperatures and cutting force
Other technical data:
220 - 240V, 50/60Hz
Transformer secondary max. 10V, 1A
Cutting wire temperature with 0.2mm diameter is variable between approx. 100 and 200 °C
Weight approx. 3kg
Insulated to class 2 requirements
PROXXONcolor> Hot wire cutter
THERMOCUT 12/E
Features:
Also for cutting free in thick Styrofoam sheets for Diorama model railway construction. For the manufacture of any profile
Other application areas:
Architecture modelling
prototype construction
for designers, decorators
for fine work on construction insulation
And of course for classical model building
Stable frame with pivotable fixing element at top and extendable lower wire fixing
Maximum total extension 200mm
Maximum work piece height 150mm
Cutting wire temperature infinitely variable
With a little practice, you can achieve optimum cuts depending on the material density and thickness. Usually at medium temperatures and without too much pressure
Heat-up time 1 second
Complete with five deformable cutting wires 285 x 0.85mm
Technical data:
12V. 60W. 50/60Hz
Cutting wire temperature controllable from approx. 150 - 350 °C
We recommend MICROMOT mains adapters as of a capacity of 2.0A for operation
