Stahlwille 721/5 QUICK Torque wrench MANOSKOP Model 721/5 Quick Measuring r. 6-50N·m Drive 3/8 L. 352mm Features:click-typeno need to reset to "0" as measuring element is only loaded during the tightening processflash adjustment via easy-to-operate clamping lever in the handleergonomically shaped, non-slip adjustment element with thumb recessOptimised ball handle for fatigue-free workingDual stop signalDouble scale N-m/ft-lbContinued load after click-type operation or loads against the functional direction, e.g. in the case of tight screws Protection of all sensitive parts by the sturdy tubular steel housingCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706. Readjustment without disassembly if necessary.Certificate in accordance with DIN EN ISO 6789-2:2017Display deviation ± 4 % Technical features:Scale division N·m: 2 N·mScale division ft·lb: 1 ft·lbMeasuring range N·m: 6-50 N·mMeasuring range ft·lb: 5-36 ft·lbExternal square drive (inch): 3/8 b1: 28 mmb2: 27,5 mmDIN: DIN EN ISO 6789-2:2017 Size: 5 Height mm (h1): 23 mmHeight mm (h2): 14,5 mmLength mm (L): 352 mmLF: 293 mmMA N·m: 6 N·mNominal value N·m: 50 N·mWeight: 880 gWeigth kg: 0.880 kgStahlwille 721/5 QUICKStahlwille product no: 50204005EAN: 4018754268917 

Stahlwille 721NF/100 Torque wrench MANOSKOP Model 721NF/100 Measuring r. 200-1000N·m Drive 3/4 L. 1504mm Features:200-1000 N-m3/4" external square drivefor general maintenance work Technical features:Scale division N·m: 25 N·mScale division ft·lb: 25 ft·lbMeasuring range N·m: 200-1000 N·mMeasuring range ft·lb: 150-725 ft·lbExternal square drive (inch): 3/4 b1: 46,5 mmb2: 76 mmWidth mm (b): 200 mmDIN: DIN EN ISO 6789-2:2017 Size: 100 Height mm (h): 42 mmLength mm (L): 1504 mmLF: 1365 mmMA N·m: 200 N·mNominal value N·m: 1000 N·mWeight: 7010 gWeigth kg: 8 kgStahlwille 721NF/100Stahlwille product no: 96502001EAN: 4018754081936 

Stahlwille 721NF/80 Torque wrench MANOSKOP Model 721NF/80 Measuring r. 160-800N·m Drive 3/4 L. 1051mm Features:click-typeconvenient adjustmentdual stop signaldual scale N-m/ft-lbleft-hand tightening thanks to reversible square driveprotection of all sensitive parts thanks to the sturdy steel tube in aluminium U-profilecalibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017Delivered in a textile bagDisplay deviation ± 4 % Technical features:Scale division N·m: 20 N·mScale division ft·lb: 20 ft·lbMeasuring range N·m: 160-800 N·mMeasuring range ft·lb: 120-600 ft·lbExternal square drive (inch): 3/4 b1: 46,5 mmb2: 76 mmWidth mm (b): 150 mmDIN: DIN EN ISO 6789-2:2017 Size: 80 Height mm (h): 42 mmLength mm (L): 1051 mmLF: 938 mmMA N·m: 160 N·mNominal value N·m: 800 N·mWeight: 6380 gWeigth kg: 7.1 kgStahlwille 721NF/80Stahlwille product no: 50200081EAN: 4018754031979 

Stahlwille 721QR/15 QUICK Torque wrench MANOSKOP Model 721QR/15 Quick Measuring r. 30-150N·m Drive 1/2 L. 452,5mm Features:Click-typeFlash adjustment with easy-to-operate clamping lever in the handleRatchet with QuickRelease safety lockDual stop signalDual scale N-m/ft-lbNo need to reset to "0" as measuring element is only loaded during the tightening processFurther load after release or loads against the direction of operation, e.g. in the case of tight screws, have no effect. The release mechanism is protected from damage by the sturdy tubular steel housingProtection of all sensitive partsCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706. Readjustment without disassembly if necessary.with certificate in accordance with DIN EN ISO 6789-2:2017Display deviation ± 4 % Technical features:Scale division N·m: 5 N·mScale division ft·lb: 5 ft·lbMeasuring range N·m: 30-150 N·mMeasuring range ft·lb: 25-110 ft·lbExternal square drive (inch): 1/2 b1: 28 mmb2: 41 mmDIN: DIN EN ISO 6789-2:2017 Size: 15 Height mm (h1): 23 mmHeight mm (h2): 18 mmLength mm (L): 452,5 mmLF: 387 mmMA N·m: 30 N·mNominal value N·m: 150 N·mWeight: 1268 gWeigth kg: 1.27 kgStahlwille 721QR/15 QUICKStahlwille product no: 50204115EAN: 4018754268955 

Stahlwille 721QR/20 QUICK Torque wrench MANOSKOP Model 721QR/20 Quick Measuring r. 40-200N·m Drive 1/2 L. 482mm Features:Click-typeFlash adjustment with easy-to-operate clamping lever in the handleRatchet with QuickRelease safety lockDual stop signalDual scale N-m/ft-lbNo need to reset to "0" as measuring element is only loaded during the tightening processFurther load after release or loads against the direction of operation, e.g. in the case of tight screws, have no effect. The release mechanism is protected from damage by the sturdy tubular steel housingProtection of all sensitive partsCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706. Readjustment without disassembly if necessary.with certificate in accordance with DIN EN ISO 6789-2:2017Display deviation ± 4 % Technical features:Scale division N·m: 5 N·mScale division ft·lb: 5 ft·lbMeasuring range N·m: 40-200 N·mMeasuring range ft·lb: 30-145 ft·lbExternal square drive (inch): 1/2 b1: 28 mmb2: 41 mmDIN: DIN EN ISO 6789-2:2017 Size: 20 Height mm (h1): 23 mmHeight mm (h2): 18 mmLength mm (L): 482 mmLF: 416,5 mmMA N·m: 40 N·mNominal value N·m: 200 N·mWeight: 1338 gWeigth kg: 1.34 kgStahlwille 721QR/20 QUICKStahlwille product no: 50204120EAN: 4018754268962 

Stahlwille 721QR/20/3/1 QUICK Wheel-fitting set Model 721QR/20/3/1 Quick 5 pcs. Features:In a sturdy plastic caseContents 5-piece set:1 Standard MANOSKOP No. 721QR/20 Quick: 40-200 N-m, 30-150 ft-lb, with built-in QuickRelease ratchet, reversible, 1/2" external square drive3 wheel nut sockets No. 51IMP K: 17 mm (green); 19 mm (blue); 21 mm (red)1 QuickRelease extension No. 509QR: L. 130 mm Technical features:Measuring range N·m: 40-200 N·mMeasuring range ft·lb: 30-150 ft·lbNumber of tools: 5 pcs.Width mm (b): 95 mmHeight mm (h): 75 mmLength mm (L): 560 mmWeight: 2818 gWeigth kg: 2.82 kgStahlwille 721QR/20/3/1 QUICKStahlwille product no: 96507214EAN: 4018754283217 

Stahlwille 40/29/4 SCI Ratchet bit set 1/4" 33 pcs   Features: Ratchet bit set 1/4", 33 pcs 40/29/4 SCI in soft case with hard foam insert   Scope of delivery: Contents, 33-piece set:   1 bit ratchet No. 4008-2 1 ratchet No. 418B 8 hex socket wrench inserts, 1/4" No. 40: 5.5; 6; 7; 8; 10; 12; 13; 14 mm 1 bit for slotted screws No. 1166: 1.0 x 5.5 mm 5 bits for PHILLIPS® screws No. 1221-1223: PH1 (2x); PH2 (2x); PH3 5 bits for POZIDRIV®/SUPADRIV® screws No. PZ 1221-PZ 1223: PZ1 (2x); PZ2 (2x) 6 bits for recessed TORX® screws No. 1440-1446: T10; T15; T20; T25; T30; T40 4 bits for Allen screws No. 1300-1303: 3; 4; 5; 6 mm 1 connecting part with external hex and external square 1/4", for holding socket wrench inserts 1/4" No. 3116 1 quick change holder No. 3825/1     Technical features: Stahlwille code: 91220419 EAN: 4018754333448

Stahlwille 725/4 Ratchet insert adaptor Drive 1/4 Tool holders9 x 12 Features: reversible 22 teeth Technical features:External square drive (inch): 1/4 Number of teeth: 22 Working angle: 16.4 °Width mm (b): 22 mmSize square socket [inside square drive]: 9 x 12 mmHeight mm (h): 13,8 mmmax. torque: 40 N·mS: 17,5 mmWeight: 62 gWeigth kg: 0.060 kgStahlwille 725/4Stahlwille product no: 58254004EAN: 4018754140787 

Stahlwille 7250B/4 Spare parts set Hex 1/4 " f.725B/4 Features:Contents 9-piece:1 rotating part; 1 locking disc; 1 shift lever with pin; 1 ball; 2 compression springs; 2 retaining screws; 1 cover plate Technical features:for model: 725B/4 Internal hex drive [inch]: 1/4 "Weight: 21 gWeigth kg: 0.02 kgStahlwille 7250B/4Stahlwille product no: 19012022EAN: 4018754242658 

Stahlwille 725B/4 Bit ratchet insert tool Hex 1/4" Tool holders9 x 12 Features: reversible with hexagon socket, 1/4" or 5/16", DIN 3126 / ISO 1173 D 6.3 or D8 for direct mounting of 1/4" or 5/16" hexagon socket C 6.3 or C 8 (size 4: 22 teeth, size 5: 30 teeth) hexagon socket C 6.3 or C 8 (size 4: 22 teeth, size 5: 30 teeth). 5: 30 teeth) Internal hex with annular compression spring Bits are easy to insert, snap in securely and are easy to pull out again; also hex with wide groove (shape E, DIN 3126 / ISO 1173) Technical features:Number of teeth: 22 Working angle: 16.4 °Width mm (b): 22 mmDIN: DIN 3126 / ISO 1173 D 6,3 oder D8 Size: 4 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 13,6 mmInternal hex drive [inch]: 1/4 "S: 17,5 mmWeight: 54 gWeigth kg: 0.05 kgStahlwille 725B/4Stahlwille product no: 58255004EAN: 4018754140794 

Stahlwille 725B/5 Bit ratchet insert tool Hex 5/16" Tool holders9 x 12 Features: reversible with hexagon socket, 1/4" or 5/16", DIN 3126 / ISO 1173 D 6.3 or D8 for direct mounting of 1/4" or 5/16" hexagon socket C 6.3 or C 8 (size 4: 22 teeth, size 5: 30 teeth) hexagon socket C 6.3 or C 8 (size 4: 22 teeth, size 5: 30 teeth). 5: 30 teeth) Internal hex with annular compression spring Bits are easy to insert, snap in securely and are easy to pull out again; also hex with wide groove (shape E, DIN 3126 / ISO 1173) Technical features:Number of teeth: 30 Working angle: 12 °Width mm (b): 29 mmDIN: DIN 3126 / ISO 1173 D 6,3 oder D8 Size: 5 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 17,9 mmInternal hex drive [inch]: 5/16 "S: 28 mmWeight: 117 gWeigth kg: 0.12 kgStahlwille 725B/5Stahlwille product no: 58255005EAN: 4018754154715 

Stahlwille 725QR/ 4 QR ratchet insert tool Drive 1/4 Tool holders9 x 12 Features: reversible with QuickRelease safety lock Size 4: 22 teeth Size 5 and 10: 30 teeth Technical features:External square drive (inch): 1/4 Number of teeth: 22 Working angle: 16.4 °Width mm (b): 22 mmSize: 4 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 13,8 mmmax. torque: 40 N·mS: 17,5 mmWeight: 50 gWeigth kg: 0.06 kgStahlwille 725QR/ 4Stahlwille product no: 58253004EAN: 4018754139606 

Stahlwille 725QR/ 5 QR ratchet insert tool Drive 3/8 Tool holders9 x 12 Features: reversible with QuickRelease safety lock Size 4: 22 teeth Size 5 and 10: 30 teeth Technical features:External square drive (inch): 3/8 Number of teeth: 30 Working angle: 12 °Width mm (b): 29 mmSize: 5 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 18 mmmax. torque: 100 N·mS: 28 mmWeight: 130 gWeigth kg: 0.130 kgStahlwille 725QR/ 5Stahlwille product no: 58253005EAN: 4018754139613 

Stahlwille 725QR/10 QR ratchet insert tool Drive 1/2 Tool holders9 x 12 Features: reversible with QuickRelease safety lock Size 4: 22 teeth Size 5 and 10: 30 teeth Technical features:External square drive (inch): 1/2 Number of teeth: 30 Working angle: 12 °Width mm (b): 29 mmSize: 10 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 18 mmmax. torque: 100 N·mS: 28 mmWeight: 141 gWeigth kg: 0.14 kgStahlwille 725QR/10Stahlwille product no: 58253010EAN: 4018754139620 

Stahlwille 725QR/20 QR ratchet insert tool Drive 1/2 Tool holders14 x 18 Features:reversiblewith QuickRelease safety lock36 teeth Technical features:External square drive (inch): 1/2 Number of teeth: 36 Working angle: 10 °Width mm (b): 41 mmSize: 20 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 22,3 mmmax. torque: 200 N·mS: 38,5 mmWeight: 325 gWeigth kg: 0.33 kgStahlwille 725QR/20Stahlwille product no: 58253020EAN: 4018754139637 

Stahlwille 73 NM/15 Friction gauge Model 73Nm/15 Measuring r. 2-15N·m Drive 1/2 L. 298,5mm Features: indicating fixed square for clockwise measurements trailing indicator dial no "pointer flutter" during the measuring process lightweight design thanks to the use of aluminium certified in accordance with DIN EN ISO 6789-2:2017 indication deviation ± 4 % Technical features:Scale division N·m: 0,5 N·mMeasuring range N·m: 2-15 N·mExternal square drive (inch): 1/2 Width mm (b): 72 mmDIN: DIN EN ISO 6789-2:2017 Height mm (h): 50 mmLength mm (L): 298,5 mmLF: 250 mmMA N·m: 2 N·mNominal value N·m: 15 N·mWeight: 676 gWeigth kg: 0.68 kgStahlwille 73 NM/15Stahlwille product no: 50240015EAN: 4018754163830 

Stahlwille 730/10 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 20-100N·m Tool holders 9 x 12 mm L. 386mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division N·m: 10 N·mScale division ft·lb: 2,5 ft·lbMeasuring range N·m: 20-100 N·mMeasuring range ft·lb: 15-75 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 0,5 N·m Weight with box: 1788 gSize: 10 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 386 mmLF: 336 mmMA N·m: 20 N·mNominal value N·m: 100 N·mSF: 17,5 mmWeight: 986 gWeigth kg: 1.570 kgStahlwille 730/10 FIXStahlwille product no: 96503010EAN: 4018754269440 

Stahlwille 730/10 QUICK Torque wrench service MANOSKOP Model 730/10 Quick Measuring r. 20-100N·m Tool holders 9 x 12 mm L. 370mm Features:click-type with a dual stop signalDisplay deviation: ±4 %no resetting to "0" requiredthe measuring element is only loaded during the tightening processwith mount for interchangeable insert/shell toolsQuickRelease safety locksliding adjustment knob for quick torque settingarrow-shaped pointersnon-slip adjustment element with thumb recessdual stop signaldual scale N-m/ft-lb or N-m/in-lbOn request also available as N-m version only without double scaleErgonomic 2-component handleLeft-hand tightening by turning the insert/shell toolsTrigger mechanism insensitive to further and counter loadWith calibration certificateCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706Easy adjustment using two adjustment pointsCertificate in accordance with DIN EN ISO 6789-2:2017 Technical features:Scale division N·m: 2,5 N·mScale division ft·lb: 2,5 ft·lbMeasuring range N·m: 20-100 N·mMeasuring range ft·lb: 15-72,5 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Size: 10 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 370 mmLF: 343 mmSF: 17,5 mmWeight: 936 gWeigth kg: 0.94 kgStahlwille 730/10 QUICKStahlwille product no: 50184010EAN: 4018754266203 

Stahlwille 730/100 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 200-1000N·m Tool holders 22 x 28 mm L. 1363mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division N·m: 100 N·mScale division ft·lb: 25 ft·lbMeasuring range N·m: 200-1000 N·mMeasuring range ft·lb: 150-750 ft·lbWidth mm (b): 30,6 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 5 N·m Weight with box: 11000 gSize: 100 Size square socket [inside square drive]: 22 x 28 mmHeight mm (h): 25,6 mmLength mm (L): 1363 mmLF: 1352 mmMA N·m: 200 N·mNominal value N·m: 1000 N·mSF: 55 mmWeight: 5196 gWeigth kg: 11 kgStahlwille 730/100 FIXStahlwille product no: 96503100EAN: 4018754269679 

Stahlwille 730/12 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 25-130N·m Tool holders 14 x 18 mm L. 421mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division N·m: 10 N·mScale division ft·lb: 2,5 ft·lbMeasuring range N·m: 25-130 N·mMeasuring range ft·lb: 20-95 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 0,5 N·m Weight with box: 1928 gSize: 12 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 421 mmLF: 379 mmMA N·m: 25 N·mNominal value N·m: 130 N·mSF: 25 mmWeight: 1124 gWeigth kg: 1.75 kgStahlwille 730/12 FIXStahlwille product no: 96503012EAN: 4018754269457 

Stahlwille 730/12 QUICK Torque wrench service MANOSKOP Model 730/12 Quick Measuring r. 25-130N·m Tool holders 14 x 18 mm L. 410mm Features:click-type with a dual stop signalDisplay deviation: ±4 %no resetting to "0" requiredthe measuring element is only loaded during the tightening processwith mount for interchangeable insert/shell toolsQuickRelease safety locksliding adjustment knob for quick torque settingarrow-shaped pointersnon-slip adjustment element with thumb recessdual stop signaldual scale N-m/ft-lb or N-m/in-lbOn request also available as N-m version only without double scaleErgonomic 2-component handleLeft-hand tightening by turning the insert/shell toolsTrigger mechanism insensitive to further and counter loadWith calibration certificateCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706Easy adjustment using two adjustment pointsCertificate in accordance with DIN EN ISO 6789-2:2017 Technical features:Scale division N·m: 2,5 N·mScale division ft·lb: 2,5 ft·lbMeasuring range N·m: 25-130 N·mMeasuring range ft·lb: 20-95 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Size: 12 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 410 mmLF: 390 mmSF: 25 mmWeight: 1074 gWeigth kg: 1.07 kgStahlwille 730/12 QUICKStahlwille product no: 50184012EAN: 4018754268863 

Stahlwille 730/2 QUICK Torque wrench service MANOSKOP (N·m) Model 730/2 Quick Measuring r. 4-20N·m Tool holders 9 x 12 mm L. 179mm Features:click-typemount for interchangeable insert/shell toolsergonomically shaped, non-slip adjustment element with thumb recessoptimised ball handle for fatigue-free workingdual stop signalno need to reset to "0", as the measuring element is only loaded during the tightening processLeft-hand tightening by turning the insert/shell toolsContinued loading after click-type or loads against the functional direction, e.g. in the case of stuck screws. Further load after triggering or loads against the functional direction, e.g. with tight screws, do not act on the trigger mechanism, which is thus protected against damageCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessarywith certificateDisplay deviation ± 4 % Technical features:Scale division N·m: 0,5 N·mMeasuring range N·m: 4-20 N·mWidth mm (b): 27,5 mmSize: 2 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23,6 mmLength mm (L): 179 mmLF: 157,2 mmSF: 17,5 mmWeight: 315 gWeigth kg: 0.31 kgStahlwille 730/2 QUICKStahlwille product no: 50184002EAN: 4018754292653 

Stahlwille 730/20 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 40-200N·m Tool holders 14 x 18 mm L. 467mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division N·m: 10 N·mScale division ft·lb: 5 ft·lbMeasuring range N·m: 40-200 N·mMeasuring range ft·lb: 30-150 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 1 N·m Weight with box: 1890 gSize: 20 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 467 mmLF: 424,5 mmMA N·m: 40 N·mNominal value N·m: 200 N·mSF: 25 mmWeight: 1266 gWeigth kg: 1.89 kgStahlwille 730/20 FIXStahlwille product no: 96503020EAN: 4018754269464 

Stahlwille 730/20 QUICK Torque wrench service MANOSKOP Model 730/20 Quick Measuring r. 40-200N·m Tool holders 14 x 18 mm L. 455mm Features:click-type with a dual stop signalDisplay deviation: ±4 %no resetting to "0" requiredthe measuring element is only loaded during the tightening processwith mount for interchangeable insert/shell toolsQuickRelease safety locksliding adjustment knob for quick torque settingarrow-shaped pointersnon-slip adjustment element with thumb recessdual stop signaldual scale N-m/ft-lb or N-m/in-lbOn request also available as N-m version only without double scaleErgonomic 2-component handleLeft-hand tightening by turning the insert/shell toolsTrigger mechanism insensitive to further and counter loadWith calibration certificateCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706Easy adjustment using two adjustment pointsCertificate in accordance with DIN EN ISO 6789-2:2017 Technical features:Scale division N·m: 5 N·mScale division ft·lb: 5 ft·lbMeasuring range N·m: 40-200 N·mMeasuring range ft·lb: 30-145 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Size: 20 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 455 mmLF: 435 mmSF: 25 mmWeight: 1310 gWeigth kg: 1.240 kgStahlwille 730/20 QUICKStahlwille product no: 50184020EAN: 4018754268870