+49 241 559713   Mon.-Thurs. 9 am-5 pm, Fri. 9 am-3 pm        30 years experience        Certified shop        Fast shipping
Go to homepage
€0.00

Die bewährten Produkte von Fertan zur Metallentrostung, Reinigung von Motoren und Karosserien.
Spezielle Reiniger und Produkte zur Autopflege, Motorradpflege und Fahrradpflege.

Die bewährten Produkte von Fertan zur Metallentrostung, Reinigung von Motoren und Karosserien.
Spezielle Reiniger und Produkte zur Autopflege, Motorradpflege und Fahrradpflege.

Filter products

Fertan MM30 Multi Metal Coating 400 ml Spray
Fertan MM30 Multi Metal Coating 400 ml Spray
Fertan MM30 Multi Metal Coating 400 ml Spray   Features: Extreme corrosion protection Temperature resistant Overpaintable Spot weldable   Description: Multi-metal coating with aluminum-titanium-zinc cathodic long-term corrosion protection. Extremely resistant and very high-quality surface quality after full hardening. Very good adhesion to steel, aluminum, and copper, can be overpainted as a bonding bridge with commercially available 1-component and 2-component paints. Spot weldable. Resistance over 500 hours at only 15 μm in salt spray test. Use on car bodies, steel frames, steel construction, heating and ventilation construction and industry.   Application: Shake can for at least 3 minutes before use. The substrate must be clean, dry, free of grease and silicone. Remove rust beforehand with FERTAN. For optimum effect, apply a thin layer of MM 30 Spray in 1-2 spraying cycles, spray distance at least 15 – 25 cm. After use, spray over the head of the spray valve. Dust-dry after approx. 5 – 10 min; Touch-proof after approx. 1 hour; Complete hardening after 2-3 days at 20° C in each case. Temperature resistant up to 300° C.   Note: The container is under pressure. Protect against sunlight and do not expose to a temperature above 50°C. Do not puncture or burn, even after use. Do not evaporate on a flame or a glowing object. Keep out of the reach of children. Keep away from heat, open flames, hot surfaces. Do not smoke.  

Content: 0.4 l (€22.38 / 1 l)

€8.95
Prices incl. VAT plus shipping costs
Fertan Multi Öl Multifunktionsspray 400 ml
Fertan Multi Öl Multifunktionsspray 400 ml
Fertan Multi Öl Multifunktionsspray 400 ml   Merkmale: Multiöl ist ein multifunktionell einsetzbares Spray zur Reinigung und Pflege von Metallteilen und Kunststoffen, zum Schmieren von Metallverbindungen und als Korrosionsschutz an metallischen Oberflächen. Verhindert das Vereisen von Schließzylindern und verdrängt Feuchtigkeit an elektronischen Bauteilen. Gute Schmierwirkung.   Vorteile: Universell einsetzbar Pflegt und schützt Metall- und Kunststoffoberflächen Harz-, säure- und silikonfrei Greift Gummi, Lack und Kunststoffe nicht an Löst verrostete Verbindungen   Anwendung: Vor Gebrauch gut schütteln. Dünn aufsprühen und ablüften lassen, verrostete Verbindungen anschließend vorsichtig lösen. Überschüssiges Material mit einem feuchten Tuch abwischen. Lagerung: An einem kühlen, gut gelüfteten Ort aufbewahren.   Gefahrenhinweis: Enthält: Naphtha (Erdöl), mit Wasserstoff behandelt, leicht; Kohlenwasserstoffe, C9-C10, n-Alkane, Isoalkane, Cyclene, < 2% Aromaten. Extrem entzündbares Aerosol. Behälter steht unter Druck: Kann bei Erwärmung bersten. Verursacht Hautreizungen. Verursacht schwere Augenreizung. Kann Schläfrigkeit und Benommenheit verursachen. Schädlich für Wasserorganismen, mit langfristiger Wirkung.  Sicherheitshinweis: Ist ärztlicher Rat erforderlich, Verpackung oder Kennzeichnungsetikett bereithalten. Darf nicht in die Hände von Kindern gelangen. Von Hitze, heißen Oberflächen, Funken, offenen Flammen und anderen Zündquellen fernhalten. Nicht rauchen. Nicht gegen offene Flamme oder andere Zündquelle sprühen. Nicht durchstechen oder verbrennen, auch nicht nach Gebrauch. Vor Sonnenbestrahlung schützen und nicht Temperaturen über 50 °C/122 °F aussetzen. Kennzeichnung der Inhaltsstoffe gemäß Verordnung (EG) Nr. 648/2004: >= 30 % aliphatische Kohlenwasserstoffe.

Content: 0.4 l (€14.88 / 1 l)

€5.95
Prices incl. VAT plus shipping costs
Fertan Prewax, 500 ml Can + 600 ml Probe
Fertan Prewax, 500 ml Can + 600 ml Probe
Fertan Prewax pre-treatment wax, 500 ml   Pre-treatment wax for car bodies Perfect for welds and overlaps   Features: PREWAX is a specially developed pre-treatment wax for auto bodies. It is applied in order to protect metal seams that have previously been treated using FERTAN Rust Converter.  PREWAX leaves a fine, extremely stable wax layer that penetrates into crevices. An addtionaly final coat of Underbody Protection Wax UBS 220 should be applied to underbodies, and cavities, sills, etc. should receive a final coating of HT Cavity Protection Wax. PREWAX's penetrating power insures that even overlapping sheets of metal and compounds are well protected at their welds and seams.  The product can also be sprayed on to metal as a final protective coating, leaving behind a very thin but stable film.  Residues are easily removed with mineral spirits. Highly flamable Irritant Environment damaging   Usage: Spray directly onto folds or metal overlaps from a short distance.  For cavities, sills, etc. use the included 4 mm applicator probe to spray directly into the cavity, allowing for slow and complete penetration. Penetration should be clearly visible at welds and overlaps. Because of the viscosity of the product, some run-off should be expected. Cover the floor during application and clean off residue as soon as possible with mineral spirits.

Content: 0.5 l (€23.90 / 1 l)

€11.95
Prices incl. VAT plus shipping costs
Fertan Protewax Protection Wax, 5 l Can
Fertan Protewax Protection Wax, 5 l Can
Fertan PROTEWAX BP 527 Schutzwachs, 400 ml   PROTEWAX is a quick-drying, abrasion- and weather-resistant solution for excellent corrosion protection    Features: Perfectly suited for new coats and vehicle restorations 1K solution - special coating and primer in one Silky gloss, transparent and UV-resistant Easy to apply and quick-drying Long-lasting corrosion protection and exceptional durability on many surfaces Zinc Iron Concrete Masonry Ideal coating agent for a wide range of applications Automotive components Stair railings Window grilles Garden fences Gates Containers Machinery Roofing and much more   Drying time: Dust dry: approx. 20 min. Touch-dry: approx. 60 min. Recoatable: approx- 3-4 h   Application: The substrate must always be clean, dry, sound, non-slip and free from substances that could impair adhesion, such as grease, wax or polishing agents, and should be at room temperature if possible. The surfaces to be coated must be checked for suitability and load-bearing capacity for subsequent coatings. Careful cleaning and degreasing is required to achieve reliable adhesion.   Hazard warnings Flammable liquid and vapor. May cause drowsiness and dizziness. Toxic to aquatic life with long lasting effects.   Safety instructions Keep out of the reach of children. Keep away from heat/sparks/open flames/hot surfaces. Do not smoke. Avoid release to the environment. Absorb spillage. Store in a cool, well-ventilated place. Further information can be found in the data sheet in the "Downloads" tab.  

Content: 5 l (€25.99 / 1 l)

€129.95
Prices incl. VAT plus shipping costs
Fertan Protewax, Protection Wax, Spray Can, 400 ml
Fertan Protewax, Protection Wax, Spray Can, 400 ml
Fertan PROTEWAX BP 527 Schutzwachs, 400 ml   PROTEWAX is a quick-drying, abrasion- and weather-resistant solution for excellent corrosion protection    Features: Perfectly suited for new coats and vehicle restorations 1K solution - special coating and primer in one Silky gloss, transparent and UV-resistant Easy to apply and quick-drying Long-lasting corrosion protection and exceptional durability on many surfaces Zinc Iron Concrete Masonry Ideal coating agent for a wide range of applications Automotive components Stair railings Window grilles Garden fences Gates Containers Machinery Roofing and much more   Drying time: Dust dry: approx. 20 min. Touch-dry: approx. 60 min. Recoatable: approx- 3-4 h   Application: The substrate must always be clean, dry, sound, non-slip and free from substances that could impair adhesion, such as grease, wax or polishing agents, and should be at room temperature if possible. The surfaces to be coated must be checked for suitability and load-bearing capacity for subsequent coatings. Careful cleaning and degreasing is required to achieve reliable adhesion.   Hazard warnings Extremely flammable aerosol. Pressurized container: May burst if heated. Causes serious eye irritation. May cause drowsiness and dizziness.   Safety instructions Keep out of the reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Wear protective gloves/protective clothing/eye protection/face protection. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing. If eye irritation persists: Seek medical advice/attention. Protect from sunlight and do not expose to temperatures exceeding 50 °C/122 °F. Further information can be found in the data sheet in the "Downloads" tab.  

Content: 0.4 l (€37.38 / 1 l)

€14.95
Prices incl. VAT plus shipping costs
Fertan QuickClean Ölbindemittel 20 Liter
Fertan QuickClean Ölbindemittel 20 Liter
Fertan QuickClean Oil absorbent flakes 3 liters   Features: QUICKCLEAN is a new generation powder binder. Classification criterion: Oil binder type III R. The product differs significantly from other oil binders because it does not absorb water and is even buoyant. This is especially important when oil or chemicals are floating on the water. These can then be bound by means of QUICKCLEAN, removed from the water or simply soaked up, without the water being contaminated. Extremely cost-saving, due to the  low quantities required. The product absorbs 2.5 times its own weight. No water is absorbed. Oil and chemicals are separated by the product in the water. Optimal use also on water surfaces etc. QUICKCLEAN does not cause scratches on flooring or tiles, floors are clean and non-slip. Due to the very low requirement quantity, only very low disposal costs arise. Very low dead weight, very economical and can be stored indefinitely, even in humid conditions.   Characteristics: Extremely absorbent Extremely economical floatable Takes up 3 times its own weight Low cost

Content: 20 l (€1.00 / 1 l)

€19.95
Prices incl. VAT plus shipping costs
Fertan QuickClean Ölbindemittel 3 Liter
Fertan QuickClean Ölbindemittel 3 Liter
Fertan QuickClean Oil absorbent flakes 3 liters   Features: QUICKCLEAN is a new generation powder binder. Classification criterion: Oil binder type III R. The product differs significantly from other oil binders because it does not absorb water and is even buoyant. This is especially important when oil or chemicals are floating on the water. These can then be bound by means of QUICKCLEAN, removed from the water or simply soaked up, without the water being contaminated. Extremely cost-saving, due to the  low quantities required. The product absorbs 2.5 times its own weight. No water is absorbed. Oil and chemicals are separated by the product in the water. Optimal use also on water surfaces etc. QUICKCLEAN does not cause scratches on flooring or tiles, floors are clean and non-slip. Due to the very low requirement quantity, only very low disposal costs arise. Very low dead weight, very economical and can be stored indefinitely, even in humid conditions.   Characteristics: Extremely absorbent Extremely economical floatable Takes up 3 times its own weight Low cost

Content: 3 l (€2.32 / 1 l)

€6.95
Prices incl. VAT plus shipping costs
Fertan Rust Converter with spray gun, 250 ml
Fertan Rust Converter with spray gun, 250 ml
  Fertan Rust Converter, 250 ml   The FERTAN rust converter is the perfect rust converter. With the FERTAN rust converter you can easily remove strong rust. For optimal rust removal.   Features: 250 millilitre spray gun for the removal of rust and corrosion of carbon steel for vehicles, vehicle parts and fuel tanks, car body cavities for metal constructions, ships, ship parts, port facilities for steel halls, conservatories and other carbon steel components Proven for decades in restoration the surface to be treated must be free of dirt, oil, grease and silicone, i. e. metallically clean, but not rust-free   Fertan Rust converter advantages: As a rust converter, FERTAN dissolves the existing rust layer (Fe3) and decomposes it into a non-reactive powder. The non-corrosive Fe2 layer underneath is protected with the new metal bond and the previously corroded metal can be provided with the required final protection within 6 months. This can be used in paint, varnish, wax, tar, zinc, epoxy resin, etc. e. be. FERTAN rust converter can be used successfully on slightly rusted, strong rust and also on bare metal. The protective effect is achieved in principle. The product is also water-based for environmental reasons. For this reason, the surface to be treated must be free of dirt, oil, grease and silicone, i. e. metallic clean, but not rust-free. Only with extremely strong rust layers, over 5 mm, a second treatment may be necessary. However, use FERTAN only at temperatures above 5°C and leave on for about 24 – 48 hours. Always clean the surface with water before the final treatment. The FERTAN rust converter can be used even on damp surfaces and is free of pollutants.   Application: FERTAN Rust converter Application: (Shake before use) Remove loose rust and prepare a smooth lacquerable surface for the surface to be painted later. (e. g. by grinding) Before applying FERTAN, it is important to clean surfaces of oil, grease, silicone and dirt. Apply FERTAN using a clean brush, roller or spray gun.   Temperature information: Allow FERTAN to act at temperatures above 20°C for 24 hours. In dry environment or direct sunlight, moisten slightly after 1-2 hours (fog moisture). At temperatures of 5 – 19° C, extend the reaction time to approx. 48 hours, or longer. Do not use in frost and temperatures below 5° C!   Surface turns black – blue violet Ideal for post-treatment after 6 months at the latest: Filler, primer (FERPOX, MM30), colour, cavity protection wash and underbody protection waxes (UBS 240), EP resins etc. Only rinse the surface with water before further treatment (the surface should not be damaged mechanically, otherwise the protective layer will be destroyed – no grinding, etc. ) This black, blue-violet surface can be overpainted with all conventional primers and varnishes, 1 litre of FERTAN is sufficient for approx. 12 – 15m2 surface when applied with a brush. FERTAN may cause stains on bright surfaces and absorbent surfaces, so cover them and wash splashes immediately with water, avoiding any open-pored material (e. g. wood, concrete, etc. ) that should not be processed. Clean tools after use with clear water. Wear protective clothing and follow safety instructions.    

Content: 0.25 l (€59.80 / 1 l)

€14.95
Prices incl. VAT plus shipping costs
Fertan Rust Converter, 1 Liter, Standard Can
Fertan Rust Converter, 1 Liter, Standard Can
  Fertan Rust Converter, 1 Liter   The FERTAN rust converter is the perfect rust converter. With the FERTAN rust converter you can easily remove strong rust. For optimal rust removal.   Features: 1 litre standard dose for the removal of rust and corrosion of carbon steel for vehicles, vehicle parts and fuel tanks, car body cavities for metal constructions, ships, ship parts, port facilities for steel halls, conservatories and other carbon steel components Proven for decades in restoration the surface to be treated must be free of dirt, oil, grease and silicone, i. e. metallically clean, but not rust-free   Fertan Rust converter advantages: As a rust converter, FERTAN dissolves the existing rust layer (Fe3) and decomposes it into a non-reactive powder. The non-corrosive Fe2 layer underneath is protected with the new metal bond and the previously corroded metal can be provided with the required final protection within 6 months. This can be used in paint, varnish, wax, tar, zinc, epoxy resin, etc. e. be. FERTAN rust converter can be used successfully on slightly rusted, strong rust and also on bare metal. The protective effect is achieved in principle. The product is also water-based for environmental reasons. For this reason, the surface to be treated must be free of dirt, oil, grease and silicone, i. e. metallic clean, but not rust-free. Only with extremely strong rust layers, over 5 mm, a second treatment may be necessary. However, use FERTAN only at temperatures above 5°C and leave on for about 24 – 48 hours. Always clean the surface with water before the final treatment. The FERTAN rust converter can be used even on damp surfaces and is free of pollutants.   Application: FERTAN Rust converter Application: (Shake before use) Remove loose rust and prepare a smooth lacquerable surface for the surface to be painted later. (e. g. by grinding) Before applying FERTAN, it is important to clean surfaces of oil, grease, silicone and dirt. Apply FERTAN using a clean brush, roller or spray gun.   Temperature information: Allow FERTAN to act at temperatures above 20°C for 24 hours. In dry environment or direct sunlight, moisten slightly after 1-2 hours (fog moisture). At temperatures of 5 – 19° C, extend the reaction time to approx. 48 hours, or longer. Do not use in frost and temperatures below 5° C!   Surface turns black – blue violet Ideal for post-treatment after 6 months at the latest: Filler, primer (FERPOX, MM30), colour, cavity protection wash and underbody protection waxes (UBS 240), EP resins etc. Only rinse the surface with water before further treatment (the surface should not be damaged mechanically, otherwise the protective layer will be destroyed – no grinding, etc. ) This black, blue-violet surface can be overpainted with all conventional primers and varnishes, 1 litre of FERTAN is sufficient for approx. 12 – 15m2 surface when applied with a brush. FERTAN may cause stains on bright surfaces and absorbent surfaces, so cover them and wash splashes immediately with water, avoiding any open-pored material (e. g. wood, concrete, etc. ) that should not be processed. Clean tools after use with clear water. Wear protective clothing and follow safety instructions.    

€28.95
Prices incl. VAT plus shipping costs
Fertan Sprühgerät zum Selbstbefüllen, 700ml,Alu
Fertan Sprühgerät zum Selbstbefüllen, 700ml,Alu
Sprühgerät zum Selbstbefüllen mit 2 Sprühköpfen.   Becherinnenseite lackiert Inhalt 700 ml mit 2 Sprühköpfen ( Strahl + Kegel ) Luftbefüllung auch mittels Handpumpe Betriebsdruck: 5 bar; max. Druck 10 bar

€33.95
Prices incl. VAT plus shipping costs
Fertan Tapox Tank Sealing 0,5 kg + Hardener
Fertan Tapox Tank Sealing 0,5 kg + Hardener
Fertan Tapox 2-K Tank sealing TAPOX is the proven and durable, as well as very resistant 2-K tank interior coating. Features: Fuel resistant Temperature resistant, resistant to +80°C E. g. for lacquers. Extremely resistant. Suitable for all fuel cards (e. g. : motorcycle, car, boat, fuel oil tank, industrial tank). Fuel tanks made of steel have the property to rust easily. The reason is the MTBE (methyl tertiate butyl ester) added to the impact resistance in modern fuels. A special 2-C inner coating, which is resistant to fuels, provides a remedy. Tapox Klein (285ml): Maximum tank volume: Motorcycle 20l / Autotank 45l.   Benefits: Not released by petrol, diesel or ethanol Resistant to many acids and alkalis Temperature resistant up to +80 °C   Application: Before use, stir the product TAPOX very well, add hardener and mix to a completely thin coating. Please note that TAPOX is a resin and not a color and must therefore be stirred longer to obtain the completely thin mixture! Clean the tank very thoroughly before the inner coating, rust and protect it against new corrosion with FERTAN. Apply the TAPOX coating only to the completely dry tank. Pay close attention to processing instructions. Processing time of the mixed product, for interim storage at 0° – max 4° C, maximum 4 hours. Notes on error avoidance: Keep to the processing temperature (above 15° C). Hardener and stem must be mixed completely. Provide sufficient ventilation during curing (see instructions). TAPOX likes to settle more firmly on the bottom of the can. This does not affect the quality in any way, it may only be necessary to stir a little longer. Light pre-mixing is very useful and allows a better mixing of both components after the addition of the hardener, which is important for the adhesion of the final coating. Only optimally mixed components, at temperatures above 15°C, guarantee the perfect and fuel-resistant final coating with a very long service life. Dry season: At 20 °C Dust dry 15-30 min Handle-resistant 60-120 min Full 72 hours Processing tools: No processing tools required. (for commercial fuel tanks). For large tanks, which are accessible for example, an application is possible with the help of air tools or brushes/rollers. Air flow is mandatory.   Content: 285 ml Tapox sealing 160 ml TX-10 hardener

Content: 0.445 l (€74.04 / 1 l)

€32.95
Prices incl. VAT plus shipping costs
Fertan Tapox Tank Sealing 0,5 kg + Hardener
Fertan Tapox Tank Sealing 0,5 kg + Hardener
Fertan Tapox 2-K Tank sealing TAPOX is the proven and durable, as well as very resistant 2-K tank interior coating. Features: Fuel resistant Temperature resistant, resistant to +80°C E. g. for lacquers. Extremely resistant. Suitable for all fuel cards (e. g. : motorcycle, car, boat, fuel oil tank, industrial tank). Fuel tanks made of steel have the property to rust easily. The reason is the MTBE (methyl tertiate butyl ester) added to the impact resistance in modern fuels. A special 2-C inner coating, which is resistant to fuels, provides a remedy. Tapox Klein (570ml): Maximum tank volume: Autotank 80 l.   Benefits: Not released by petrol, diesel or ethanol Resistant to many acids and alkalis Temperature resistant up to +80 °C   Application: Before use, stir the product TAPOX very well, add hardener and mix to a completely thin coating. Please note that TAPOX is a resin and not a color and must therefore be stirred longer to obtain the completely thin mixture! Clean the tank very thoroughly before the inner coating, rust and protect it against new corrosion with FERTAN. Apply the TAPOX coating only to the completely dry tank. Pay close attention to processing instructions. Processing time of the mixed product, for interim storage at 0° – max 4° C, maximum 4 hours. Notes on error avoidance: Keep to the processing temperature (above 15° C). Hardener and stem must be mixed completely. Provide sufficient ventilation during curing (see instructions). TAPOX likes to settle more firmly on the bottom of the can. This does not affect the quality in any way, it may only be necessary to stir a little longer. Light pre-mixing is very useful and allows a better mixing of both components after the addition of the hardener, which is important for the adhesion of the final coating. Only optimally mixed components, at temperatures above 15°C, guarantee the perfect and fuel-resistant final coating with a very long service life. Dry season: At 20 °C Dust dry 15-30 min Handle-resistant 60-120 min Full 72 hours Processing tools: No processing tools required. (for commercial fuel tanks). For large tanks, which are accessible for example, an application is possible with the help of air tools or brushes/rollers. Air flow is mandatory.   Content: 570 ml Tapox sealing 320 ml TX-10 hardener

Content: 0.89 l (€59.49 / 1 l)

€52.95
Prices incl. VAT plus shipping costs
Fertan UBS 220 Protection Wax, 500 ml, Spray Can
Fertan UBS 220 Protection Wax, 500 ml, Spray Can
Fertan Underbody Protection Wax, 500 ml, Spray Can Features: UBS 220 is an underbody protection wax PVC compatible, in a transparent to slightly amber color The "amber effect" is being reinforced the more of the product is applied. Thus UBS 220 is an ideal protective, wax-based product. It can be used for long term protection for underbodies of motor vehicles or with lacquered floors - even in extreme conditions! Irritant Highly flammable Environmental damaging

Content: 0.5 l (€21.90 / 1 l)

€10.95
Prices incl. VAT plus shipping costs
Fertan UBS 240 Unterbody protection wax 5 L
Fertan UBS 240 Unterbody protection wax 5 L
Fertan UBS 240 Unterbody protection wax 5 L   Features: 5000 ml PVC - compatible: contains no aromatic ingredients wax-based: best adhesion work even in thick or thin layers contains special additives: highly friction-resistant-water-repellent transparent-amber: useful at all unterbody and chassis parts highly-abrasion resistant: strong mechanical capacity highest resistance in the environment: more than 1000 hrs. salt fog test resistance   Usage: Because of its special viscosity UBS 240 may be applied by means of an airless spray gun or by commonly-available proprietary guns. Even at a temperatures of over 30 deg C the product doesn’t drip. The ideal application temperature is around 20 deg. C. If the product is to be applied by means of a paintbrush, it is recommended to heat the can in a tub of warm water. Do not heat in an oven or other form of heating equipment. Applied in thin layers on painted surfaces, e.g painted underbodies, UBS 240 offers best protection. In the presence of corrosion use FERTAN rust converter first. Very useful after Fertan stone chip protection in thin film   Technical features: The product forms even in thin layers a perfect protection film which gives at painted or galvanized surfaces best possible appearance. On unprotected underbodies a first layer with resin-based Fertan stone-chip, is recommended. At overlaps or welded joints a first protection with PREWAX should be used. At low temperatures the product should be heated up to 25 deg C. in a tub of warm water. Do not heat on an oven or any other form of heating equipment please. In the way the creeping characteristic will be improved.

Content: 5 l (€11.99 / 1 l)

€59.95
Prices incl. VAT plus shipping costs
Fertan UBS 240, Underbody Protection Wax, 1 Liter
Fertan UBS 240, Underbody Protection Wax, 1 Liter
Fertan Underbody protection wax, 1 Liter Features: Fertan UBS 240 is an underbody protection wax for long-term protection PVC-compatible, in a transparent to slightly amber color. The "amber effect" is reinforced, the more of the product is being applied. Fertan UBS 240 is an ideal protective wax-based product, especially for underbodies of motor vehicles Can be used even in extreme conditions to protect over long term. Fertan can also be applied to lacquered underbodies. Highly flammable Irritant Environmental damaging

€14.95
Prices incl. VAT plus shipping costs
Fertan Underbody Protection Wax beige Green Line 1 liter
Fertan Underbody Protection Wax beige Green Line 1 liter
Fertan Underbody Protection Wax beige Green Line 1 Liter   Features: Beige underbody protection wax is based on a solvent-free, oxidatively drying system and offers optimal corrosion protection for the underbody area of vehicle bodies. This corrosion protection is ensured by excellent adhesion at very low as well as high temperatures on metallic surfaces. The product forms a black, elastic, and firm coating. Increased temperature is not necessary for film cross-linking. The compatibility with topcoats, attachments, and other materials must be checked for each application case.   Technical Features: Content: 1 liter Color: beige Fertan item number 60401

€15.95
Prices incl. VAT plus shipping costs
Fertan Underbody Protection Wax Black Green Line 1
Fertan Underbody Protection Wax Black Green Line 1
Fertan Underbody Protection Wax Black Green Line 1 Liter   Features: Beige underbody protection wax is based on a solvent-free, oxidatively drying system and offers optimal corrosion protection for the underbody area of vehicle bodies. This corrosion protection is ensured by excellent adhesion at very low as well as high temperatures on metallic surfaces. The product forms a black, elastic, and firm coating. Increased temperature is not necessary for film cross-linking. The compatibility with topcoats, attachments, and other materials must be checked for each application case.   Technical Features: Content: 1 liter Color: black Fertan item number 60401

€16.95
Prices incl. VAT plus shipping costs
Fertan Wachs- und Fettentferner 500 ml Spray
Fertan Wachs- und Fettentferner 500 ml Spray
Fertan Wachs- und Fettentferner 500 ml Spray   Produktbeschreibung: Beim FERTAN Wachs- und Fettentferner handelt es sich um ein speziellen Reiniger für Konservierungswachse, Fette und auch Öle. Es besteht aus ausgewähltem paraffinischen Siedeschnitte. Die Verträglichkeit mit Decklacken, Anbauteilen und anderen Materialien ist für jeden Anwendungszweck gesondert zu prüfen.   Merkmale: Aromatenfrei / Geruchsarm Hoher Wirkstoffanteil von 97 % Kunststoff- und Lackverträglich Trocknet rückstandsfrei ab   Applikation: Sprühapplikation. Auf zu reinigenden Bereich auftragen und nach 1-2 Minuten Wartezeit mit einem sauberen, saugfähigen Tuch abreiben. Rückstände des Reinigers trocknen nach ca. 60 Minuten rückstandsfrei ab.   Gefahrenhinweise: Behälter steht unter Druck: kann bei Erwärmung bersten. Wiederholter Kontakt kann zu spröder oder rissiger Haut führen. ACHTUNG: UN 1950   Sicherheitshinweise: Von Hitze, heißen Oberflächen, Funken, offenen Flammen und anderen Zündquellen fernhalten. Nicht rauchen. Nicht durchstechen oder verbrennen, auch nicht nach Gebrauch. Nebel/Dampf/Aerosol nicht einatmen. Nur im Freien oder in gut belüfteten Räumen verwenden. Schutzhandschuhe / Augenschutz tragen. BEI EINATMEN: Die Person an die frische Luft bringen und für ungehinderte Atmung sorgen. Vor Sonnenbestrahlung schützen. Nicht Temperaturen über 50 °C/122 °F aussetzen. Entsorgung des Inhalts / des Behälters gemäß den örtlichen / regionalen / nationalen/ internationalen Vorschriften.

Content: 0.5 l (€29.90 / 1 l)

€14.95
Prices incl. VAT plus shipping costs
Fertan, Protewax, Protection Wax, 1 l Can
Fertan, Protewax, Protection Wax, 1 l Can
Fertan PROTEWAX BP 527 Schutzwachs, 400 ml   PROTEWAX is a quick-drying, abrasion- and weather-resistant solution for excellent corrosion protection    Features: Perfectly suited for new coats and vehicle restorations 1K solution - special coating and primer in one Silky gloss, transparent and UV-resistant Easy to apply and quick-drying Long-lasting corrosion protection and exceptional durability on many surfaces Zinc Iron Concrete Masonry Ideal coating agent for a wide range of applications Automotive components Stair railings Window grilles Garden fences Gates Containers Machinery Roofing and much more   Drying time: Dust dry: approx. 20 min. Touch-dry: approx. 60 min. Recoatable: approx- 3-4 h   Application: The substrate must always be clean, dry, sound, non-slip and free from substances that could impair adhesion, such as grease, wax or polishing agents, and should be at room temperature if possible. The surfaces to be coated must be checked for suitability and load-bearing capacity for subsequent coatings. Careful cleaning and degreasing is required to achieve reliable adhesion.   Hazard warnings Flammable liquid and vapor. May cause drowsiness and dizziness. Toxic to aquatic life with long lasting effects.   Safety instructions Keep out of the reach of children. Keep away from heat/sparks/open flames/hot surfaces. Do not smoke. Avoid release to the environment. Absorb spillage. Store in a cool, well-ventilated place. Further information can be found in the data sheet in the "Downloads" tab.  

€26.95
Prices incl. VAT plus shipping costs
This website uses cookies to ensure the best experience possible. More information...