Fertan Tapox 2-K Tank sealing
TAPOX is the proven and durable, as well as very resistant 2-K tank interior coating.
Features:
Fuel resistant
Temperature resistant, resistant to +80°C E. g. for lacquers.
Extremely resistant.
Suitable for all fuel cards (e. g. : motorcycle, car, boat, fuel oil tank, industrial tank).
Fuel tanks made of steel have the property to rust easily. The reason is the MTBE (methyl tertiate butyl ester) added to the impact resistance in modern fuels. A special 2-C inner coating, which is resistant to fuels, provides a remedy.
Tapox Klein (285ml): Maximum tank volume: Motorcycle 20l / Autotank 45l.
Benefits:
Not released by petrol, diesel or ethanol
Resistant to many acids and alkalis
Temperature resistant up to +80 °C
Application:
Before use, stir the product TAPOX very well, add hardener and mix to a completely thin coating. Please note that TAPOX is a resin and not a color and must therefore be stirred longer to obtain the completely thin mixture!
Clean the tank very thoroughly before the inner coating, rust and protect it against new corrosion with FERTAN.
Apply the TAPOX coating only to the completely dry tank.
Pay close attention to processing instructions. Processing time of the mixed product, for interim storage at 0° – max 4° C, maximum 4 hours.
Notes on error avoidance:
Keep to the processing temperature (above 15° C).
Hardener and stem must be mixed completely.
Provide sufficient ventilation during curing (see instructions).
TAPOX likes to settle more firmly on the bottom of the can. This does not affect the quality in any way, it may only be necessary to stir a little longer.
Light pre-mixing is very useful and allows a better mixing of both components after the addition of the hardener, which is important for the adhesion of the final coating.
Only optimally mixed components, at temperatures above 15°C, guarantee the perfect and fuel-resistant final coating with a very long service life.
Dry season:
At 20 °C
Dust dry 15-30 min
Handle-resistant 60-120 min
Full 72 hours
Processing tools:
No processing tools required. (for commercial fuel tanks).
For large tanks, which are accessible for example, an application is possible with the help of air tools or brushes/rollers.
Air flow is mandatory.
Content:
285 ml Tapox sealing
160 ml TX-10 hardener
Fertan Tapox 2-K Tank sealing
TAPOX is the proven and durable, as well as very resistant 2-K tank interior coating.
Features:
Fuel resistant
Temperature resistant, resistant to +80°C E. g. for lacquers.
Extremely resistant.
Suitable for all fuel cards (e. g. : motorcycle, car, boat, fuel oil tank, industrial tank).
Fuel tanks made of steel have the property to rust easily. The reason is the MTBE (methyl tertiate butyl ester) added to the impact resistance in modern fuels. A special 2-C inner coating, which is resistant to fuels, provides a remedy.
Tapox Klein (570ml): Maximum tank volume: Autotank 80 l.
Benefits:
Not released by petrol, diesel or ethanol
Resistant to many acids and alkalis
Temperature resistant up to +80 °C
Application:
Before use, stir the product TAPOX very well, add hardener and mix to a completely thin coating. Please note that TAPOX is a resin and not a color and must therefore be stirred longer to obtain the completely thin mixture!
Clean the tank very thoroughly before the inner coating, rust and protect it against new corrosion with FERTAN.
Apply the TAPOX coating only to the completely dry tank.
Pay close attention to processing instructions. Processing time of the mixed product, for interim storage at 0° – max 4° C, maximum 4 hours.
Notes on error avoidance:
Keep to the processing temperature (above 15° C).
Hardener and stem must be mixed completely.
Provide sufficient ventilation during curing (see instructions).
TAPOX likes to settle more firmly on the bottom of the can. This does not affect the quality in any way, it may only be necessary to stir a little longer.
Light pre-mixing is very useful and allows a better mixing of both components after the addition of the hardener, which is important for the adhesion of the final coating.
Only optimally mixed components, at temperatures above 15°C, guarantee the perfect and fuel-resistant final coating with a very long service life.
Dry season:
At 20 °C
Dust dry 15-30 min
Handle-resistant 60-120 min
Full 72 hours
Processing tools:
No processing tools required. (for commercial fuel tanks).
For large tanks, which are accessible for example, an application is possible with the help of air tools or brushes/rollers.
Air flow is mandatory.
Content:
570 ml Tapox sealing
320 ml TX-10 hardener
Fertan Underbody Protection Wax, 500 ml, Spray Can
Features:
UBS 220 is an underbody protection wax
PVC compatible, in a transparent to slightly amber color
The "amber effect" is being reinforced the more of the product is applied.
Thus UBS 220 is an ideal protective, wax-based product.
It can be used for long term protection for underbodies of motor vehicles or with lacquered floors - even in extreme conditions!
Irritant
Highly flammable
Environmental damaging
Fertan UBS 240 Unterbody protection wax 5 L
Features:
5000 ml
PVC - compatible: contains no aromatic ingredients
wax-based: best adhesion work even in thick or thin layers
contains special additives: highly friction-resistant-water-repellent
transparent-amber: useful at all unterbody and chassis parts
highly-abrasion resistant: strong mechanical capacity
highest resistance in the environment: more than 1000 hrs. salt fog test resistance
Usage:
Because of its special viscosity UBS 240 may be applied by means of an airless spray gun or by commonly-available proprietary guns.
Even at a temperatures of over 30 deg C the product doesn’t drip.
The ideal application temperature is around 20 deg. C. If the product is to be applied by means of a paintbrush, it is recommended to heat the can in a tub of warm water. Do not heat in an oven or other form of heating equipment.
Applied in thin layers on painted surfaces, e.g painted underbodies, UBS 240 offers best protection.
In the presence of corrosion use FERTAN rust converter first.
Very useful after Fertan stone chip protection in thin film
Technical features:
The product forms even in thin layers a perfect protection film which gives at painted or galvanized surfaces best possible appearance.
On unprotected underbodies a first layer with resin-based Fertan stone-chip, is recommended.
At overlaps or welded joints a first protection with PREWAX should be used.
At low temperatures the product should be heated up to 25 deg C. in a tub of warm water.
Do not heat on an oven or any other form of heating equipment please. In the way the creeping characteristic will be improved.
Fertan Underbody protection wax, 1 Liter
Features:
Fertan UBS 240 is an underbody protection wax for long-term protection
PVC-compatible, in a transparent to slightly amber color.
The "amber effect" is reinforced, the more of the product is being applied.
Fertan UBS 240 is an ideal protective wax-based product, especially for underbodies of motor vehicles
Can be used even in extreme conditions to protect over long term.
Fertan can also be applied to lacquered underbodies.
Highly flammable
Irritant
Environmental damaging
Fertan Underbody and Cavity Gun
Features:
Large riser tube for waxes completely made of metal.
With cavity probe 600 mm and 360° nozzle.
Ideal for processing Fertan HT cavity protection wax, UBS 240 underbody protection wax and stone chip protection.
Technical features:
Air consuption: 300 l / min
Pressure: 2 - 8 bar
Inner hose diameter: 10 mm
Power: Min. 350 / 100 l (2,2 - 3 kW)
Air supply connection: 1/4"
Fertan Underbody Protection Wax beige Green Line 1 Liter
Features:
Beige underbody protection wax is based on a solvent-free, oxidatively drying system and offers optimal corrosion protection for the underbody area of vehicle bodies.
This corrosion protection is ensured by excellent adhesion at very low as well as high temperatures on metallic surfaces.
The product forms a black, elastic, and firm coating.
Increased temperature is not necessary for film cross-linking.
The compatibility with topcoats, attachments, and other materials must be checked for each application case.
Technical Features:
Content: 1 liter
Color: beige
Fertan item number 60401
Fertan Underbody Protection Wax Black Green Line 1 Liter
Features:
Beige underbody protection wax is based on a solvent-free, oxidatively drying system and offers optimal corrosion protection for the underbody area of vehicle bodies.
This corrosion protection is ensured by excellent adhesion at very low as well as high temperatures on metallic surfaces.
The product forms a black, elastic, and firm coating.
Increased temperature is not necessary for film cross-linking.
The compatibility with topcoats, attachments, and other materials must be checked for each application case.
Technical Features:
Content: 1 liter
Color: black
Fertan item number 60401
Fertan Wachs- und Fettentferner 500 ml Spray
Produktbeschreibung:
Beim FERTAN Wachs- und Fettentferner handelt es sich um ein speziellen Reiniger für Konservierungswachse, Fette und auch Öle.
Es besteht aus ausgewähltem paraffinischen Siedeschnitte.
Die Verträglichkeit mit Decklacken, Anbauteilen und anderen Materialien ist für jeden Anwendungszweck gesondert zu prüfen.
Merkmale:
Aromatenfrei / Geruchsarm
Hoher Wirkstoffanteil von 97 %
Kunststoff- und Lackverträglich
Trocknet rückstandsfrei ab
Applikation:
Sprühapplikation.
Auf zu reinigenden Bereich auftragen und nach 1-2 Minuten Wartezeit mit einem sauberen, saugfähigen Tuch abreiben.
Rückstände des Reinigers trocknen nach ca. 60 Minuten rückstandsfrei ab.
Gefahrenhinweise:
Behälter steht unter Druck: kann bei Erwärmung bersten. Wiederholter Kontakt kann zu spröder oder rissiger Haut führen.
ACHTUNG: UN 1950
Sicherheitshinweise:
Von Hitze, heißen Oberflächen, Funken, offenen Flammen und anderen Zündquellen fernhalten. Nicht rauchen. Nicht durchstechen oder verbrennen, auch nicht nach Gebrauch. Nebel/Dampf/Aerosol nicht einatmen. Nur im Freien oder in gut belüfteten Räumen verwenden. Schutzhandschuhe / Augenschutz tragen. BEI EINATMEN: Die Person an die frische Luft bringen und für ungehinderte Atmung sorgen. Vor Sonnenbestrahlung schützen. Nicht Temperaturen über 50 °C/122 °F aussetzen. Entsorgung des Inhalts / des Behälters gemäß den örtlichen / regionalen / nationalen/ internationalen Vorschriften.
Fertan PROTEWAX BP 527 Schutzwachs, 400 ml
PROTEWAX is a quick-drying, abrasion- and weather-resistant solution for excellent corrosion protection
Features:
Perfectly suited for new coats and vehicle restorations
1K solution - special coating and primer in one
Silky gloss, transparent and UV-resistant
Easy to apply and quick-drying
Long-lasting corrosion protection and exceptional durability on many surfaces
Zinc
Iron
Concrete
Masonry
Ideal coating agent for a wide range of applications
Automotive components
Stair railings
Window grilles
Garden fences
Gates
Containers
Machinery
Roofing and much more
Drying time:
Dust dry: approx. 20 min.
Touch-dry: approx. 60 min.
Recoatable: approx- 3-4 h
Application:
The substrate must always be clean, dry, sound, non-slip and free from substances that could impair adhesion, such as grease, wax or polishing agents, and should be at room temperature if possible.
The surfaces to be coated must be checked for suitability and load-bearing capacity for subsequent coatings.
Careful cleaning and degreasing is required to achieve reliable adhesion.
Hazard warnings
Flammable liquid and vapor. May cause drowsiness and dizziness. Toxic to aquatic life with long lasting effects.
Safety instructions
Keep out of the reach of children. Keep away from heat/sparks/open flames/hot surfaces. Do not smoke. Avoid release to the environment. Absorb spillage. Store in a cool, well-ventilated place.
Further information can be found in the data sheet in the "Downloads" tab.
Original Fix-Zange Swiss-made, Größe 1 12-15 mm
4 Funktionen:
schnelles & Maßgerechtes Beschneiden des Schweißdrahtes
zeitsparendes Reinigen der Schutzgasdüse
Abziehen der Schutzgasdüse
Lösen & Festziehen der Stromdüse
Flachpinsel Profiausführung Stärke 3" 75 mm
Merkmale:
Profi-Handwerkerpinsel / Flachpinsel
helle Borstenmischung
3" = 75 mm / Borstenlänge 44 mm
Weißblechzwinge
Holzstiel unlackiert
Spitzenqualität
Technische Merkmale:
Länge des Artikels: 230 mm
Breite des Artikels: 75 mm
Höhe des Artikels: 8 mm
Gewicht: 44 g
FLUID FILM AS-R 400 ml Spray can 6pcs set+probe
FLUID FILM AS-R as 400 ml spray can is a universal product for maintenance, preservation, rust dissolving and as a lubricant.
400 ml spray can 6pcs set+probe
Viscosity: low (eg. like sirup)
Creep ability: + + + +
Protection: ca. 4 years (in closed cavities)
Processing: Spray can with additional fine applicator
General usage:
FLUID FILM AS-R is a physiologically harmless, solvent-free and thixotropic one-layer corrosion protection coating with slip and rust dissolving effect based on lanolin and forms a clear and glossy protective film.
The 400 ml spray can contains FLUID FILM NAS with propane-butane as propellant.
400 ml spray can as a universal product for commercial and private use for maintenance, preservation, rust dissolving and as a lubricant.
FLUID FILM AS-R is very suitable for factories, workshops, garages and the do-it-yourselfer for use as a preservative, maintenance product, rust remover and lubricant.
On the car it provides protection for folds, door edges, cavities, engine compartment as well as for all other parts at risk of corrosion. Especially when shut down in winter, even a thin film of FLUID FILM AS-R protects even motorcycles, bicycles or boat parts from rust, also on chains, joints and metal surfaces, such as machines and tools, corrosion is stopped immediately or does not occur at all.
By combining it as a corrosion inhibitor and lubricant, moving parts such as idler pulleys, chain transmissions or joints can be protected.
FLUID FILM AS-R can be used very effectively for the maintenance of sports, leisure and household equipment or in the restoration sector, where special attention is paid to the original patina.
Unlike conventional products, FLUID FILM AS-R is more environmentally friendly and economical to use due to its solvent-free composition.
The basic substance lanolin is not volatile like oil or kerosene and does not resinify.
In contrast, the effect of solvents usually wears off after 12-15 seconds, and that of oil or kerosene ends after a few days, at which point these conventional agents completely lose their protective effect.
The insert from the 400 ml spray can allows an even application on large surfaces with the normal spray attachment.
For pinpoint use even in difficult-to-reach places, there is a 15 cm long spray tube on the can. For use in longer cavities, an approx. 60 cm long spray head extension with a 3-jet all-round nozzle can be supplied.
Application:
Surface preparation:
Surface may be dry or wet, loose dirt and rust to be removed.
Surfaces may still be wet but without surface water.
Application:
Spray FLUID FILM evenly on cleaned, dry or wet
surfaces. If needed, repeat application.
Hard-to-reach areas to be coated by means of
the sprayhead with spraytube.
Coating can be removed easily with fuel and
other degreasing agents.
Storage:
To be stored in a cool and dry place.
Recommended storage temperature: 15-35°C
Pressurized gas packaging can be stored for 2 years.
Principal characteristics:
Behaves extremely resistant to all weather conditions, including snow and slush and the solvent salts used in winter service.
Extremely effective and reliable at the same time as a rust remover and water-displacing corrosion inhibitor.
Excellent salt water resistance.
As corrosion protection of steel parts and other metal parts during transport and processing in the manufacturing plant.
Fast creeping, yet well adhering, temperature stable, will not be washed off or altered by rain and sea water, nor will it evaporate and gum up, as is the case with most penetrating oils.
Bitumen protection layers already on the car chassis floors are plasticized by FLUID FILM and thus activated.
FLUID FILM AS-R 400 ml Spray can 2pcs set+probe
FLUID FILM AS-R as 400 ml spray can is a universal product for maintenance, preservation, rust dissolving and as a lubricant.
400 ml spray can 2pcs set+probe
Viscosity: low (eg. like sirup)
Creep ability: + + + +
Protection: ca. 4 years (in closed cavities)
Processing: Spray can with additional fine applicator
General usage:
FLUID FILM AS-R is a physiologically harmless, solvent-free and thixotropic one-layer corrosion protection coating with slip and rust dissolving effect based on lanolin and forms a clear and glossy protective film.
The 400 ml spray can contains FLUID FILM NAS with propane-butane as propellant.
400 ml spray can as a universal product for commercial and private use for maintenance, preservation, rust dissolving and as a lubricant.
FLUID FILM AS-R is very suitable for factories, workshops, garages and the do-it-yourselfer for use as a preservative, maintenance product, rust remover and lubricant.
On the car it provides protection for folds, door edges, cavities, engine compartment as well as for all other parts at risk of corrosion. Especially when shut down in winter, even a thin film of FLUID FILM AS-R protects even motorcycles, bicycles or boat parts from rust, also on chains, joints and metal surfaces, such as machines and tools, corrosion is stopped immediately or does not occur at all.
By combining it as a corrosion inhibitor and lubricant, moving parts such as idler pulleys, chain transmissions or joints can be protected.
FLUID FILM AS-R can be used very effectively for the maintenance of sports, leisure and household equipment or in the restoration sector, where special attention is paid to the original patina.
Unlike conventional products, FLUID FILM AS-R is more environmentally friendly and economical to use due to its solvent-free composition.
The basic substance lanolin is not volatile like oil or kerosene and does not resinify.
In contrast, the effect of solvents usually wears off after 12-15 seconds, and that of oil or kerosene ends after a few days, at which point these conventional agents completely lose their protective effect.
The insert from the 400 ml spray can allows an even application on large surfaces with the normal spray attachment.
For pinpoint use even in difficult-to-reach places, there is a 15 cm long spray tube on the can. For use in longer cavities, an approx. 60 cm long spray head extension with a 3-jet all-round nozzle can be supplied.
Application:
Surface preparation:
Surface may be dry or wet, loose dirt and rust to be removed.
Surfaces may still be wet but without surface water.
Application:
Spray FLUID FILM evenly on cleaned, dry or wet
surfaces. If needed, repeat application.
Hard-to-reach areas to be coated by means of
the sprayhead with spraytube.
Coating can be removed easily with fuel and
other degreasing agents.
Storage:
To be stored in a cool and dry place.
Recommended storage temperature: 15-35°C
Pressurized gas packaging can be stored for 2 years.
Principal characteristics:
Behaves extremely resistant to all weather conditions, including snow and slush and the solvent salts used in winter service.
Extremely effective and reliable at the same time as a rust remover and water-displacing corrosion inhibitor.
Excellent salt water resistance.
As corrosion protection of steel parts and other metal parts during transport and processing in the manufacturing plant.
Fast creeping, yet well adhering, temperature stable, will not be washed off or altered by rain and sea water, nor will it evaporate and gum up, as is the case with most penetrating oils.
Bitumen protection layers already on the car chassis floors are plasticized by FLUID FILM and thus activated.
FLUID FILM AS-R 400 ml 3pcs set+probeSpray can
FLUID FILM AS-R as 400 ml spray can is a universal product for maintenance, preservation, rust dissolving and as a lubricant.
400 ml spray can 3pcs set+probe
Viscosity: low (eg. like sirup)
Creep ability: + + + +
Protection: ca. 4 years (in closed cavities)
Processing: Spray can with additional fine applicator
General usage:
FLUID FILM AS-R is a physiologically harmless, solvent-free and thixotropic one-layer corrosion protection coating with slip and rust dissolving effect based on lanolin and forms a clear and glossy protective film.
The 400 ml spray can contains FLUID FILM NAS with propane-butane as propellant.
400 ml spray can as a universal product for commercial and private use for maintenance, preservation, rust dissolving and as a lubricant.
FLUID FILM AS-R is very suitable for factories, workshops, garages and the do-it-yourselfer for use as a preservative, maintenance product, rust remover and lubricant.
On the car it provides protection for folds, door edges, cavities, engine compartment as well as for all other parts at risk of corrosion. Especially when shut down in winter, even a thin film of FLUID FILM AS-R protects even motorcycles, bicycles or boat parts from rust, also on chains, joints and metal surfaces, such as machines and tools, corrosion is stopped immediately or does not occur at all.
By combining it as a corrosion inhibitor and lubricant, moving parts such as idler pulleys, chain transmissions or joints can be protected.
FLUID FILM AS-R can be used very effectively for the maintenance of sports, leisure and household equipment or in the restoration sector, where special attention is paid to the original patina.
Unlike conventional products, FLUID FILM AS-R is more environmentally friendly and economical to use due to its solvent-free composition.
The basic substance lanolin is not volatile like oil or kerosene and does not resinify.
In contrast, the effect of solvents usually wears off after 12-15 seconds, and that of oil or kerosene ends after a few days, at which point these conventional agents completely lose their protective effect.
The insert from the 400 ml spray can allows an even application on large surfaces with the normal spray attachment.
For pinpoint use even in difficult-to-reach places, there is a 15 cm long spray tube on the can. For use in longer cavities, an approx. 60 cm long spray head extension with a 3-jet all-round nozzle can be supplied.
Application:
Surface preparation:
Surface may be dry or wet, loose dirt and rust to be removed.
Surfaces may still be wet but without surface water.
Application:
Spray FLUID FILM evenly on cleaned, dry or wet
surfaces. If needed, repeat application.
Hard-to-reach areas to be coated by means of
the sprayhead with spraytube.
Coating can be removed easily with fuel and
other degreasing agents.
Storage:
To be stored in a cool and dry place.
Recommended storage temperature: 15-35°C
Pressurized gas packaging can be stored for 2 years.
Principal characteristics:
Behaves extremely resistant to all weather conditions, including snow and slush and the solvent salts used in winter service.
Extremely effective and reliable at the same time as a rust remover and water-displacing corrosion inhibitor.
Excellent salt water resistance.
As corrosion protection of steel parts and other metal parts during transport and processing in the manufacturing plant.
Fast creeping, yet well adhering, temperature stable, will not be washed off or altered by rain and sea water, nor will it evaporate and gum up, as is the case with most penetrating oils.
Bitumen protection layers already on the car chassis floors are plasticized by FLUID FILM and thus activated.
FLUID FILM AS-R 400 ml Spray can 4pcs set+probe
FLUID FILM AS-R as 400 ml spray can is a universal product for maintenance, preservation, rust dissolving and as a lubricant.
400 ml spray can 4pcs set+probe
Viscosity: low (eg. like sirup)
Creep ability: + + + +
Protection: ca. 4 years (in closed cavities)
Processing: Spray can with additional fine applicator
General usage:
FLUID FILM AS-R is a physiologically harmless, solvent-free and thixotropic one-layer corrosion protection coating with slip and rust dissolving effect based on lanolin and forms a clear and glossy protective film.
The 400 ml spray can contains FLUID FILM NAS with propane-butane as propellant.
400 ml spray can as a universal product for commercial and private use for maintenance, preservation, rust dissolving and as a lubricant.
FLUID FILM AS-R is very suitable for factories, workshops, garages and the do-it-yourselfer for use as a preservative, maintenance product, rust remover and lubricant.
On the car it provides protection for folds, door edges, cavities, engine compartment as well as for all other parts at risk of corrosion. Especially when shut down in winter, even a thin film of FLUID FILM AS-R protects even motorcycles, bicycles or boat parts from rust, also on chains, joints and metal surfaces, such as machines and tools, corrosion is stopped immediately or does not occur at all.
By combining it as a corrosion inhibitor and lubricant, moving parts such as idler pulleys, chain transmissions or joints can be protected.
FLUID FILM AS-R can be used very effectively for the maintenance of sports, leisure and household equipment or in the restoration sector, where special attention is paid to the original patina.
Unlike conventional products, FLUID FILM AS-R is more environmentally friendly and economical to use due to its solvent-free composition.
The basic substance lanolin is not volatile like oil or kerosene and does not resinify.
In contrast, the effect of solvents usually wears off after 12-15 seconds, and that of oil or kerosene ends after a few days, at which point these conventional agents completely lose their protective effect.
The insert from the 400 ml spray can allows an even application on large surfaces with the normal spray attachment.
For pinpoint use even in difficult-to-reach places, there is a 15 cm long spray tube on the can. For use in longer cavities, an approx. 60 cm long spray head extension with a 3-jet all-round nozzle can be supplied.
Application:
Surface preparation:
Surface may be dry or wet, loose dirt and rust to be removed.
Surfaces may still be wet but without surface water.
Application:
Spray FLUID FILM evenly on cleaned, dry or wet
surfaces. If needed, repeat application.
Hard-to-reach areas to be coated by means of
the sprayhead with spraytube.
Coating can be removed easily with fuel and
other degreasing agents.
Storage:
To be stored in a cool and dry place.
Recommended storage temperature: 15-35°C
Pressurized gas packaging can be stored for 2 years.
Principal characteristics:
Behaves extremely resistant to all weather conditions, including snow and slush and the solvent salts used in winter service.
Extremely effective and reliable at the same time as a rust remover and water-displacing corrosion inhibitor.
Excellent salt water resistance.
As corrosion protection of steel parts and other metal parts during transport and processing in the manufacturing plant.
Fast creeping, yet well adhering, temperature stable, will not be washed off or altered by rain and sea water, nor will it evaporate and gum up, as is the case with most penetrating oils.
Bitumen protection layers already on the car chassis floors are plasticized by FLUID FILM and thus activated.
FLUID FILM AS-R 400 ml Spray can 8pcs set+probe
FLUID FILM AS-R as 400 ml spray can is a universal product for maintenance, preservation, rust dissolving and as a lubricant.
400 ml spray can 8pcs set+probe
Viscosity: low (eg. like sirup)
Creep ability: + + + +
Protection: ca. 4 years (in closed cavities)
Processing: Spray can with additional fine applicator
General usage:
FLUID FILM AS-R is a physiologically harmless, solvent-free and thixotropic one-layer corrosion protection coating with slip and rust dissolving effect based on lanolin and forms a clear and glossy protective film.
The 400 ml spray can contains FLUID FILM NAS with propane-butane as propellant.
400 ml spray can as a universal product for commercial and private use for maintenance, preservation, rust dissolving and as a lubricant.
FLUID FILM AS-R is very suitable for factories, workshops, garages and the do-it-yourselfer for use as a preservative, maintenance product, rust remover and lubricant.
On the car it provides protection for folds, door edges, cavities, engine compartment as well as for all other parts at risk of corrosion. Especially when shut down in winter, even a thin film of FLUID FILM AS-R protects even motorcycles, bicycles or boat parts from rust, also on chains, joints and metal surfaces, such as machines and tools, corrosion is stopped immediately or does not occur at all.
By combining it as a corrosion inhibitor and lubricant, moving parts such as idler pulleys, chain transmissions or joints can be protected.
FLUID FILM AS-R can be used very effectively for the maintenance of sports, leisure and household equipment or in the restoration sector, where special attention is paid to the original patina.
Unlike conventional products, FLUID FILM AS-R is more environmentally friendly and economical to use due to its solvent-free composition.
The basic substance lanolin is not volatile like oil or kerosene and does not resinify.
In contrast, the effect of solvents usually wears off after 12-15 seconds, and that of oil or kerosene ends after a few days, at which point these conventional agents completely lose their protective effect.
The insert from the 400 ml spray can allows an even application on large surfaces with the normal spray attachment.
For pinpoint use even in difficult-to-reach places, there is a 15 cm long spray tube on the can. For use in longer cavities, an approx. 60 cm long spray head extension with a 3-jet all-round nozzle can be supplied.
Application:
Surface preparation:
Surface may be dry or wet, loose dirt and rust to be removed.
Surfaces may still be wet but without surface water.
Application:
Spray FLUID FILM evenly on cleaned, dry or wet
surfaces. If needed, repeat application.
Hard-to-reach areas to be coated by means of
the sprayhead with spraytube.
Coating can be removed easily with fuel and
other degreasing agents.
Storage:
To be stored in a cool and dry place.
Recommended storage temperature: 15-35°C
Pressurized gas packaging can be stored for 2 years.
Principal characteristics:
Behaves extremely resistant to all weather conditions, including snow and slush and the solvent salts used in winter service.
Extremely effective and reliable at the same time as a rust remover and water-displacing corrosion inhibitor.
Excellent salt water resistance.
As corrosion protection of steel parts and other metal parts during transport and processing in the manufacturing plant.
Fast creeping, yet well adhering, temperature stable, will not be washed off or altered by rain and sea water, nor will it evaporate and gum up, as is the case with most penetrating oils.
Bitumen protection layers already on the car chassis floors are plasticized by FLUID FILM and thus activated.
FLUID FILM AS-R 400 ml Spray can
FLUID FILM AS-R as 400 ml spray can is a universal product for maintenance, preservation, rust dissolving and as a lubricant.
400 ml spray can
Viscosity: low (eg. like sirup)
Creep ability: + + + +
Protection: ca. 4 years (in closed cavities)
Processing: Spray can with additional fine applicator
General usage:
FLUID FILM AS-R is a physiologically harmless, solvent-free and thixotropic one-layer corrosion protection coating with slip and rust dissolving effect based on lanolin and forms a clear and glossy protective film.
The 400 ml spray can contains FLUID FILM NAS with propane-butane as propellant.
400 ml spray can as a universal product for commercial and private use for maintenance, preservation, rust dissolving and as a lubricant.
FLUID FILM AS-R is very suitable for factories, workshops, garages and the do-it-yourselfer for use as a preservative, maintenance product, rust remover and lubricant.
On the car it provides protection for folds, door edges, cavities, engine compartment as well as for all other parts at risk of corrosion. Especially when shut down in winter, even a thin film of FLUID FILM AS-R protects even motorcycles, bicycles or boat parts from rust, also on chains, joints and metal surfaces, such as machines and tools, corrosion is stopped immediately or does not occur at all.
By combining it as a corrosion inhibitor and lubricant, moving parts such as idler pulleys, chain transmissions or joints can be protected.
FLUID FILM AS-R can be used very effectively for the maintenance of sports, leisure and household equipment or in the restoration sector, where special attention is paid to the original patina.
Unlike conventional products, FLUID FILM AS-R is more environmentally friendly and economical to use due to its solvent-free composition.
The basic substance lanolin is not volatile like oil or kerosene and does not resinify.
In contrast, the effect of solvents usually wears off after 12-15 seconds, and that of oil or kerosene ends after a few days, at which point these conventional agents completely lose their protective effect.
The insert from the 400 ml spray can allows an even application on large surfaces with the normal spray attachment.
For pinpoint use even in difficult-to-reach places, there is a 15 cm long spray tube on the can. For use in longer cavities, an approx. 60 cm long spray head extension with a 3-jet all-round nozzle can be supplied.
Application:
Untergrundvorbereitung:
Surface may be dry or wet, loose dirt and rust to be removed.
Surfaces may still be wet but without surface water.
Application:
Spray FLUID FILM evenly on cleaned, dry or wet
surfaces. If needed, repeat application.
Hard-to-reach areas to be coated by means of
the sprayhead with spraytube.
Coating can be removed easily with fuel and
other degreasing agents.
Storage:
To be stored in a cool and dry place.
Recommended storage temperature: 15-35°C
Pressurized gas packaging can be stored for 2 years.
Principal characteristics:
Behaves extremely resistant to all weather conditions, including snow and slush and the solvent salts used in winter service.
Extremely effective and reliable at the same time as a rust remover and water-displacing corrosion inhibitor.
Excellent salt water resistance.
As corrosion protection of steel parts and other metal parts during transport and processing in the manufacturing plant.
Fast creeping, yet well adhering, temperature stable, will not be washed off or altered by rain and sea water, nor will it evaporate and gum up, as is the case with most penetrating oils.
Bitumen protection layers already on the car chassis floors are plasticized by FLUID FILM and thus activated.
FLUID FILM AS-R 400 ml Spray can 24pcs set+probe
FLUID FILM AS-R as 400 ml spray can is a universal product for maintenance, preservation, rust dissolving and as a lubricant.
400 ml spray can 24pcs set+probe
Viscosity: low (eg. like sirup)
Creep ability: + + + +
Protection: ca. 4 years (in closed cavities)
Processing: Spray can with additional fine applicator
General usage:
FLUID FILM AS-R is a physiologically harmless, solvent-free and thixotropic one-layer corrosion protection coating with slip and rust dissolving effect based on lanolin and forms a clear and glossy protective film.
The 400 ml spray can contains FLUID FILM NAS with propane-butane as propellant.
400 ml spray can as a universal product for commercial and private use for maintenance, preservation, rust dissolving and as a lubricant.
FLUID FILM AS-R is very suitable for factories, workshops, garages and the do-it-yourselfer for use as a preservative, maintenance product, rust remover and lubricant.
On the car it provides protection for folds, door edges, cavities, engine compartment as well as for all other parts at risk of corrosion. Especially when shut down in winter, even a thin film of FLUID FILM AS-R protects even motorcycles, bicycles or boat parts from rust, also on chains, joints and metal surfaces, such as machines and tools, corrosion is stopped immediately or does not occur at all.
By combining it as a corrosion inhibitor and lubricant, moving parts such as idler pulleys, chain transmissions or joints can be protected.
FLUID FILM AS-R can be used very effectively for the maintenance of sports, leisure and household equipment or in the restoration sector, where special attention is paid to the original patina.
Unlike conventional products, FLUID FILM AS-R is more environmentally friendly and economical to use due to its solvent-free composition.
The basic substance lanolin is not volatile like oil or kerosene and does not resinify.
In contrast, the effect of solvents usually wears off after 12-15 seconds, and that of oil or kerosene ends after a few days, at which point these conventional agents completely lose their protective effect.
The insert from the 400 ml spray can allows an even application on large surfaces with the normal spray attachment.
For pinpoint use even in difficult-to-reach places, there is a 15 cm long spray tube on the can. For use in longer cavities, an approx. 60 cm long spray head extension with a 3-jet all-round nozzle can be supplied.
Application:
Surface preparation:
Surface may be dry or wet, loose dirt and rust to be removed.
Surfaces may still be wet but without surface water.
Application:
Spray FLUID FILM evenly on cleaned, dry or wet
surfaces. If needed, repeat application.
Hard-to-reach areas to be coated by means of
the sprayhead with spraytube.
Coating can be removed easily with fuel and
other degreasing agents.
Storage:
To be stored in a cool and dry place.
Recommended storage temperature: 15-35°C
Pressurized gas packaging can be stored for 2 years.
Principal characteristics:
Behaves extremely resistant to all weather conditions, including snow and slush and the solvent salts used in winter service.
Extremely effective and reliable at the same time as a rust remover and water-displacing corrosion inhibitor.
Excellent salt water resistance.
As corrosion protection of steel parts and other metal parts during transport and processing in the manufacturing plant.
Fast creeping, yet well adhering, temperature stable, will not be washed off or altered by rain and sea water, nor will it evaporate and gum up, as is the case with most penetrating oils.
Bitumen protection layers already on the car chassis floors are plasticized by FLUID FILM and thus activated.
FLUID FILM AS-R 400 ml Spray can 12pcs set+probe
FLUID FILM AS-R as 400 ml spray can is a universal product for maintenance, preservation, rust dissolving and as a lubricant.
400 ml spray can 12pcs set+probe
Viscosity: low (eg. like sirup)
Creep ability: + + + +
Protection: ca. 4 years (in closed cavities)
Processing: Spray can with additional fine applicator
General usage:
FLUID FILM AS-R is a physiologically harmless, solvent-free and thixotropic one-layer corrosion protection coating with slip and rust dissolving effect based on lanolin and forms a clear and glossy protective film.
The 400 ml spray can contains FLUID FILM NAS with propane-butane as propellant.
400 ml spray can as a universal product for commercial and private use for maintenance, preservation, rust dissolving and as a lubricant.
FLUID FILM AS-R is very suitable for factories, workshops, garages and the do-it-yourselfer for use as a preservative, maintenance product, rust remover and lubricant.
On the car it provides protection for folds, door edges, cavities, engine compartment as well as for all other parts at risk of corrosion. Especially when shut down in winter, even a thin film of FLUID FILM AS-R protects even motorcycles, bicycles or boat parts from rust, also on chains, joints and metal surfaces, such as machines and tools, corrosion is stopped immediately or does not occur at all.
By combining it as a corrosion inhibitor and lubricant, moving parts such as idler pulleys, chain transmissions or joints can be protected.
FLUID FILM AS-R can be used very effectively for the maintenance of sports, leisure and household equipment or in the restoration sector, where special attention is paid to the original patina.
Unlike conventional products, FLUID FILM AS-R is more environmentally friendly and economical to use due to its solvent-free composition.
The basic substance lanolin is not volatile like oil or kerosene and does not resinify.
In contrast, the effect of solvents usually wears off after 12-15 seconds, and that of oil or kerosene ends after a few days, at which point these conventional agents completely lose their protective effect.
The insert from the 400 ml spray can allows an even application on large surfaces with the normal spray attachment.
For pinpoint use even in difficult-to-reach places, there is a 15 cm long spray tube on the can. For use in longer cavities, an approx. 60 cm long spray head extension with a 3-jet all-round nozzle can be supplied.
Application:
Surface preparation:
Surface may be dry or wet, loose dirt and rust to be removed.
Surfaces may still be wet but without surface water.
Application:
Spray FLUID FILM evenly on cleaned, dry or wet
surfaces. If needed, repeat application.
Hard-to-reach areas to be coated by means of
the sprayhead with spraytube.
Coating can be removed easily with fuel and
other degreasing agents.
Storage:
To be stored in a cool and dry place.
Recommended storage temperature: 15-35°C
Pressurized gas packaging can be stored for 2 years.
Principal characteristics:
Behaves extremely resistant to all weather conditions, including snow and slush and the solvent salts used in winter service.
Extremely effective and reliable at the same time as a rust remover and water-displacing corrosion inhibitor.
Excellent salt water resistance.
As corrosion protection of steel parts and other metal parts during transport and processing in the manufacturing plant.
Fast creeping, yet well adhering, temperature stable, will not be washed off or altered by rain and sea water, nor will it evaporate and gum up, as is the case with most penetrating oils.
Bitumen protection layers already on the car chassis floors are plasticized by FLUID FILM and thus activated.
