Stahlwille 730/80 Torque wrench service MANOSKOP Model 730/80 Measuring r. 160-800N·m Tool holders L. 970mm Features: With shell adaptor no. 7370/80, all 14 x 18 mm insert tools can also be used (max. 650 N-m) Supplied in textile bag Technical features:Scale division N·m: 20 N·mScale division ft·lb: 20 ft·lbMeasuring range N·m: 160-800 N·mMeasuring range ft·lb: 120-600 ft·lbExternal square drive (mm): 24,5 x 28 mmWidth mm (b): 46 mmHeight mm (h): 43 mmLength mm (L): 970 mmLF: 990 mmSF: 95 mmWeight: 4925 gWeigth kg: 4.93 kgStahlwille 730/80Stahlwille product no: 50180080EAN: 4018754114764 

Stahlwille 730A/10 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 180-900in lb  Tool holders 9 x 12 mm L. 386mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division in·lb: 100 in·lbScale division ft·lb: 2,5 ft·lbMeasuring range ft·lb: 15-75 ft·lbMeasuring range in·lb: 180-900 in·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 5 in·lb Weight with box: 1790 gSize: a/10 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 386 mmLF: 336 mmSF: 17,5 mmWeight: 988 gWeigth kg: 1.790 kgStahlwille 730A/10 FIXStahlwille product no: 96583010EAN: 4018754269792 

Stahlwille 730A/10 QUICK Torque wrench service MANOSKOP Model 730a/10 Quick Measuring r. 180-880in lb  Tool holders 9 x 12 mm L. 370mm Features:click-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lock (size 5-65)flash adjustment via easy-to-operate clamping lever in the handle (size 5-65)ergonomically shaped, non-slip adjustment element with thumb recess optimised ball handle for fatigue-free workingDual stop signalDual scale N-m/ft-lb or N-m/in-lb (size 5-80)On request, also available as an N-m version only without double scale (size 5-65)Left-hand tightening by turning the insert/shell toolsContinued load after click-type operation or loads against the functional direction, e.g. in the case of tight screws, have an effect. with tight screws, do not affect the release mechanism, which is thus protected from damageCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017Display deviation ±4 % Technical features:Scale division N·m: 2,5 N·mScale division in·lb: 20 in·lbMeasuring range N·m: 20-100 N·mMeasuring range in·lb: 180-880 in·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Size: a/10 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 370 mmLF: 343 mmSF: 17,5 mmWeight: 934 gWeigth kg: 0.93 kgStahlwille 730A/10 QUICKStahlwille product no: 50584010EAN: 4018754268986 

Stahlwille 730A/12 QUICK Torque wrench service MANOSKOP Model 730a/12 Quick Measuring r. 225-1150in lb  Tool holders 14 x 18 mm L. 410mm Features:click-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lock (size 5-65)flash adjustment via easy-to-operate clamping lever in the handle (size 5-65)ergonomically shaped, non-slip adjustment element with thumb recess optimised ball handle for fatigue-free workingDual stop signalDual scale N-m/ft-lb or N-m/in-lb (size 5-80)On request, also available as an N-m version only without double scale (size 5-65)Left-hand tightening by turning the insert/shell toolsContinued load after click-type operation or loads against the functional direction, e.g. in the case of tight screws, have an effect. with tight screws, do not affect the release mechanism, which is thus protected from damageCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017Display deviation ±4 % Technical features:Scale division N·m: 2,5 N·mScale division in·lb: 25 in·lbMeasuring range N·m: 25-130 N·mMeasuring range in·lb: 225-1150 in·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Size: a/12 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 410 mmLF: 390 mmSF: 25 mmWeight: 1076 gWeigth kg: 1.08 kgStahlwille 730A/12 QUICKStahlwille product no: 50584012EAN: 4018754268993 

Stahlwille 730A/2 QUICK Torque wrench service MANOSKOP (in·lb) Model 730a/2 Quick Measuring r. 30-175in lb  Tool holders 9 x 12 mm L. 179mm Features:click-typemount for interchangeable insert/shell toolsergonomically shaped, non-slip adjustment element with thumb recessoptimised ball handle for fatigue-free workingdual stop signalno need to reset to "0", as the measuring element is only loaded during the tightening processLeft-hand tightening by turning the insert/shell toolsContinued loading after click-type or loads against the functional direction, e.g. in the case of stuck screws. Further load after triggering or loads against the functional direction, e.g. with tight screws, do not act on the trigger mechanism, which is thus protected against damageCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessarywith certificateDisplay deviation ± 4 % Technical features:Scale division in·lb: 5 in·lbMeasuring range in·lb: 30-175 in·lbWidth mm (b): 27,5 mmSize: a/2 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23,6 mmLength mm (L): 179 mmLF: 157,2 mmSF: 17,5 mmWeight: 315 gWeigth kg: 0.32 kgStahlwille 730A/2 QUICKStahlwille product no: 50584002EAN: 4018754292684 

Stahlwille 730A/2-1 QUICK Torque wrench Model 730 Quick Measuring r. 17,5-87,5in lb  Tool holders 9 x 12 mm L. 179mm Features:click-typemount for interchangeable insert/shell toolsergonomically shaped, non-slip adjustment element with thumb recessoptimised ball handle for fatigue-free workingdual stop signalno need to reset to "0", as the measuring element is only loaded during the tightening processLeft-hand tightening by turning the insert/shell toolsContinued loading after click-type or loads against the functional direction, e.g. in the case of stuck screws. Further load after triggering or loads against the functional direction, e.g. with tight screws, do not act on the trigger mechanism, which is thus protected against damageCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessarywith certificateDisplay deviation ± 4 % Technical features:Scale division in·lb: 2,5 in·lbMeasuring range in·lb: 17,5-87,5 in·lbWidth mm (b): 27,5 mmSize: a/2-1 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23,6 mmLength mm (L): 179 mmLF: 157,2 mmSF: 17,5 mmWeight: 315 gWeigth kg: 0.4 kgStahlwille 730A/2-1 QUICKStahlwille product no: 50584001EAN: 4018754292677 

Stahlwille 730A/20 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 350-1800in lb  Tool holders 14 x 18 mm L. 467mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division in·lb: 100 in·lbScale division ft·lb: 5 ft·lbMeasuring range ft·lb: 30-150 ft·lbMeasuring range in·lb: 350-1800 in·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 10 in·lb Weight with box: 2072 gSize: a/20 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 467 mmLF: 424,5 mmSF: 25 mmWeight: 1066 gWeigth kg: 2.07 kgStahlwille 730A/20 FIXStahlwille product no: 96583020EAN: 4018754269808 

Stahlwille 730A/20 QUICK Torque wrench service MANOSKOP Model 730a/20 Quick Measuring r. 350-1750in lb  Tool holders 14 x 18 mm L. 455mm Features:click-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lock (size 5-65)flash adjustment via easy-to-operate clamping lever in the handle (size 5-65)ergonomically shaped, non-slip adjustment element with thumb recess optimised ball handle for fatigue-free workingDual stop signalDual scale N-m/ft-lb or N-m/in-lb (size 5-80)On request, also available as an N-m version only without double scale (size 5-65)Left-hand tightening by turning the insert/shell toolsContinued load after click-type operation or loads against the functional direction, e.g. in the case of tight screws, have an effect. with tight screws, do not affect the release mechanism, which is thus protected from damageCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017Display deviation ±4 % Technical features:Scale division N·m: 5 N·mScale division in·lb: 50 in·lbMeasuring range N·m: 40-200 N·mMeasuring range in·lb: 350-1750 in·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Size: a/20 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 455 mmLF: 435 mmSF: 25 mmWeight: 1216 gWeigth kg: 1.22 kgStahlwille 730A/20 QUICKStahlwille product no: 50584020EAN: 4018754269006 

Stahlwille 730A/4 QUICK Torque wrench service MANOSKOP (in·lb) Model 730A/4 Quick Measuring r. 70-350in lb  Tool holders 9 x 12 mm L. 223mm Features:click-typemount for interchangeable insert/shell toolsergonomically shaped, non-slip adjustment element with thumb recessoptimised ball handle for fatigue-free workingdual stop signalno need to reset to "0", as the measuring element is only loaded during the tightening processLeft-hand tightening by turning the insert/shell toolsContinued loading after click-type or loads against the functional direction, e.g. in the case of stuck screws. Further load after triggering or loads against the functional direction, e.g. with tight screws, do not act on the trigger mechanism, which is thus protected against damageCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessarywith certificateDisplay deviation ± 4 % Technical features:Scale division in·lb: 10 in·lbMeasuring range in·lb: 70-350 in·lbWidth mm (b): 27,5 mmSize: a/4 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23,6 mmLength mm (L): 223 mmLF: 200,8 mmSF: 17,5 mmWeight: 395 gWeigth kg: 0.4 kgStahlwille 730A/4 QUICKStahlwille product no: 50584004EAN: 4018754292691 

Stahlwille 730A/40 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 800-3600in lb  Tool holders 14 x 18 mm L. 607mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division in·lb: 100 in·lbScale division ft·lb: 20 ft·lbMeasuring range ft·lb: 60-300 ft·lbMeasuring range in·lb: 800-3600 in·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 2 ft·lb Weight with box: 2614 gSize: a/40 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 607 mmLF: 564,5 mmSF: 25 mmWeight: 1670 gWeigth kg: 2.61 kgStahlwille 730A/40 FIXStahlwille product no: 96583040EAN: 4018754269815 

Stahlwille 730A/5 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 90-450in lb  Tool holders 9 x 12 mm L. 330mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division in·lb: 50 in·lbScale division ft·lb: 1 ft·lbMeasuring range ft·lb: 7-37 ft·lbMeasuring range in·lb: 90-450 in·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 2,5 in·lb Weight with box: 1638 gSize: a/5 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 330 mmLF: 280,5 mmSF: 17,5 mmWeight: 832 gWeigth kg: 1.64 kgStahlwille 730A/5 FIXStahlwille product no: 96583005EAN: 4018754269785 

Stahlwille 730A/5 QUICK Torque wrench service MANOSKOP Model 730a/5 Quick Measuring r. 50-440in lb  Tool holders 9 x 12 mm L. 315mm Features:click-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lock (size 5-65)flash adjustment via easy-to-operate clamping lever in the handle (size 5-65)ergonomically shaped, non-slip adjustment element with thumb recess optimised ball handle for fatigue-free workingDual stop signalDual scale N-m/ft-lb or N-m/in-lb (size 5-80)On request, also available as an N-m version only without double scale (size 5-65)Left-hand tightening by turning the insert/shell toolsContinued load after click-type operation or loads against the functional direction, e.g. in the case of tight screws, have an effect. with tight screws, do not affect the release mechanism, which is thus protected from damageCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017Display deviation ±4 % Technical features:Scale division N·m: 2 N·mScale division in·lb: 10 in·lbMeasuring range N·m: 6-50 N·mMeasuring range in·lb: 50-440 in·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Size: a/5 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 315 mmLF: 288 mmSF: 17,5 mmWeight: 780 gWeigth kg: 0.780 kgStahlwille 730A/5 QUICKStahlwille product no: 50584005EAN: 4018754268979 

Stahlwille 730D/10 Torque wrench service/series MANOSKOP Model 730D Measuring r. 10-100N·m Drive L. 467mm Features:Tactile and audible release signalMount for interchangeable insert/shell toolsQuickRelease safety lockquick setting via practical keypadautomatically correct tightening torque after entering a deviating gaugeoverload protection thanks to acoustic and visual warning signalno unintentional adjustment thanks to automatic key lockdisplay function even with counter-clockwise torquesunits of measurement: N-m, ft-lb, in-lbDifferent tolerance limits can be set depending on the tightening operationOptical evaluation of the tightening operation by green and red indication on the displayAdditional protection of the default settings (function mode, click-type or setpoint value, unit of measurement, tolerance value, saving, deviating gauge) by PIN codeSaving of up to 7. 500 screwdriving dataUSB interfaceautomatic notification of the next calibration dateCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 77062-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Certified in accordance with DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a sheet steel case)PatentedSupplied with 2 mignon batteries 1.5 V. Mignon NiMH batteries AA/LR6, 1.2 V, can be used.Display deviation ± 2 %, ± 1 digit Technical features:Measuring range N·m: 10-100 N·mMeasuring range ft·lb: 7,4-75 ft·lbMeasuring range in·lb: 90-900 in·lbSetting display resolution N·m: 0,2/0,1 N·mSetting display resolution ft·lb: 0,2/0,1 ft·lbSetting display resolution in·lb: 2/1,0 in·lbBattery type: Mignon (AA) 1,5V Width mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 1510 gSize: 10 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 467 mmLF: 426,5 mmMA N·m: 10 N·mNominal value N·m: 100 N·mSF: 17,5 mmStahlwille 730D/10Stahlwille product no: 96501710EAN: 4018754180318 

Stahlwille 730D/100 Torque wrench service/series MANOSKOP Model 730D Measuring r. 100-1000N·m Drive L. 1344mm Features:Tactile and audible release signalMount for interchangeable insert/shell toolsQuickRelease safety lockquick setting via practical keypadautomatically correct tightening torque after entering a deviating gaugeoverload protection thanks to acoustic and visual warning signalno unintentional adjustment thanks to automatic key lockdisplay function even with counter-clockwise torquesunits of measurement: N-m, ft-lb, in-lbDifferent tolerance limits can be set depending on the tightening operationOptical evaluation of the tightening operation by green and red indication on the displayAdditional protection of the default settings (function mode, click-type or setpoint value, unit of measurement, tolerance value, saving, deviating gauge) by PIN codeSaving of up to 7. 500 screwdriving dataUSB interfaceautomatic notification of the next calibration dateCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 77062-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Certified in accordance with DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a sheet steel case)PatentedSupplied with 2 mignon batteries 1.5 V. Mignon NiMH batteries AA/LR6, 1.2 V, can be used.Display deviation ± 2 %, ± 1 digit Technical features:Measuring range N·m: 100-1000 N·mMeasuring range ft·lb: 74-750 ft·lbMeasuring range in·lb: 900-9000 in·lbSetting display resolution N·m: 1,0/1,0 N·mSetting display resolution ft·lb: 1,0/1,0 ft·lbSetting display resolution in·lb: 10/1,0 in·lbBattery type: Mignon (AA) 1,5V Width mm (b): 30,6 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 11000 gSize: 100 Size square socket [inside square drive]: 22 x 28 mmHeight mm (h): 25,6 mmLength mm (L): 1344 mmLF: 1341 mmMA N·m: 100 N·mNominal value N·m: 1000 N·mSF: 55 mmStahlwille 730D/100Stahlwille product no: 96502100EAN: 4018754240104 

Stahlwille 730D/20 Torque wrench service/series MANOSKOP Model 730D Measuring r. 20-200N·m Drive L. 548mm Features:Tactile and audible release signalMount for interchangeable insert/shell toolsQuickRelease safety lockquick setting via practical keypadautomatically correct tightening torque after entering a deviating gaugeoverload protection thanks to acoustic and visual warning signalno unintentional adjustment thanks to automatic key lockdisplay function even with counter-clockwise torquesunits of measurement: N-m, ft-lb, in-lbDifferent tolerance limits can be set depending on the tightening operationOptical evaluation of the tightening operation by green and red indication on the displayAdditional protection of the default settings (function mode, click-type or setpoint value, unit of measurement, tolerance value, saving, deviating gauge) by PIN codeSaving of up to 7. 500 screwdriving dataUSB interfaceautomatic notification of the next calibration dateCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 77062-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Certified in accordance with DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a sheet steel case)PatentedSupplied with 2 mignon batteries 1.5 V. Mignon NiMH batteries AA/LR6, 1.2 V, can be used.Display deviation ± 2 %, ± 1 digit Technical features:Measuring range N·m: 20-200 N·mMeasuring range ft·lb: 15-150 ft·lbMeasuring range in·lb: 180-1800 in·lbSetting display resolution N·m: 0,5/0,1 N·mSetting display resolution ft·lb: 0,5/0,1 ft·lbSetting display resolution in·lb: 5/1,0 in·lbBattery type: Mignon (AA) 1,5V Width mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 1896 gSize: 20 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 548 mmLF: 515 mmMA N·m: 20 N·mNominal value N·m: 200 N·mSF: 25 mmStahlwille 730D/20Stahlwille product no: 96501720EAN: 4018754180325 

Stahlwille 730D/40 Torque wrench service/series MANOSKOP Model 730D Measuring r. 40-400N·m Drive L. 688mm Features:Tactile and audible release signalMount for interchangeable insert/shell toolsQuickRelease safety lockquick setting via practical keypadautomatically correct tightening torque after entering a deviating gaugeoverload protection thanks to acoustic and visual warning signalno unintentional adjustment thanks to automatic key lockdisplay function even with counter-clockwise torquesunits of measurement: N-m, ft-lb, in-lbDifferent tolerance limits can be set depending on the tightening operationOptical evaluation of the tightening operation by green and red indication on the displayAdditional protection of the default settings (function mode, click-type or setpoint value, unit of measurement, tolerance value, saving, deviating gauge) by PIN codeSaving of up to 7. 500 screwdriving dataUSB interfaceautomatic notification of the next calibration dateCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 77062-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Certified in accordance with DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a sheet steel case)PatentedSupplied with 2 mignon batteries 1.5 V. Mignon NiMH batteries AA/LR6, 1.2 V, can be used.Display deviation ± 2 %, ± 1 digit Technical features:Measuring range N·m: 40-400 N·mMeasuring range ft·lb: 30-300 ft·lbMeasuring range in·lb: 360-3600 in·lbSetting display resolution N·m: 1,0/0,1 N·mSetting display resolution ft·lb: 1,0/0,1 ft·lbSetting display resolution in·lb: 10/1,0 in·lbBattery type: Mignon (AA) 1,5V Width mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 5155 gSize: 40 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 688 mmLF: 655 mmMA N·m: 40 N·mNominal value N·m: 400 N·mSF: 25 mmStahlwille 730D/40Stahlwille product no: 96501740EAN: 4018754180332 

Stahlwille 730D/65 Torque wrench service/series MANOSKOP Model 730D Measuring r. 65-650N·m Drive L. 870mm Features:Tactile and audible release signalMount for interchangeable insert/shell toolsQuickRelease safety lockquick setting via practical keypadautomatically correct tightening torque after entering a deviating gaugeoverload protection thanks to acoustic and visual warning signalno unintentional adjustment thanks to automatic key lockdisplay function even with counter-clockwise torquesunits of measurement: N-m, ft-lb, in-lbDifferent tolerance limits can be set depending on the tightening operationOptical evaluation of the tightening operation by green and red indication on the displayAdditional protection of the default settings (function mode, click-type or setpoint value, unit of measurement, tolerance value, saving, deviating gauge) by PIN codeSaving of up to 7. 500 screwdriving dataUSB interfaceautomatic notification of the next calibration dateCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 77062-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Certified in accordance with DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a sheet steel case)PatentedSupplied with 2 mignon batteries 1.5 V. Mignon NiMH batteries AA/LR6, 1.2 V, can be used.Display deviation ± 2 %, ± 1 digit Technical features:Measuring range N·m: 65-650 N·mMeasuring range ft·lb: 48-480 ft·lbMeasuring range in·lb: 580-5800 in·lbSetting display resolution N·m: 1,0/0,1 N·mSetting display resolution ft·lb: 1,0/0,1 ft·lbSetting display resolution in·lb: 10/1,0 in·lbBattery type: Mignon (AA) 1,5V Width mm (b): 30,6 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 6000 gSize: 65 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 25,6 mmLength mm (L): 870 mmLF: 837 mmMA N·m: 65 N·mNominal value N·m: 650 N·mSF: 25 mmStahlwille 730D/65Stahlwille product no: 96501765EAN: 4018754187621 

Stahlwille 730D/80 Torque wrench service/series MANOSKOP Model 730D Measuring r. 80-800N·m Drive L. 1160mm Features:Tactile and audible release signalMount for interchangeable insert/shell toolsQuickRelease safety lockquick setting via practical keypadautomatically correct tightening torque after entering a deviating gaugeoverload protection thanks to acoustic and visual warning signalno unintentional adjustment thanks to automatic key lockdisplay function even with counter-clockwise torquesunits of measurement: N-m, ft-lb, in-lbDifferent tolerance limits can be set depending on the tightening operationOptical evaluation of the tightening operation by green and red indication on the displayAdditional protection of the default settings (function mode, click-type or setpoint value, unit of measurement, tolerance value, saving, deviating gauge) by PIN codeSaving of up to 7. 500 screwdriving dataUSB interfaceautomatic notification of the next calibration dateCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 77062-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Certified in accordance with DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a sheet steel case)PatentedSupplied with 2 mignon batteries 1.5 V. Mignon NiMH batteries AA/LR6, 1.2 V, can be used.Display deviation ± 2 %, ± 1 digit Technical features:Measuring range N·m: 80-800 N·mMeasuring range ft·lb: 60-600 ft·lbMeasuring range in·lb: 720-7200 in·lbSetting display resolution N·m: 1,0/1,0 N·mSetting display resolution ft·lb: 1,0/1,0 ft·lbSetting display resolution in·lb: 10/1,0 in·lbBattery type: Mignon (AA) 1,5V Width mm (b): 30,6 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 10500 gSize: 80 Size square socket [inside square drive]: 22 x 28 mmHeight mm (h): 25,6 mmLength mm (L): 1160 mmLF: 1157 mmMA N·m: 80 N·mNominal value N·m: 800 N·mSF: 55 mmStahlwille 730D/80Stahlwille product no: 96502080EAN: 4018754240098 

Stahlwille 730DII/65 Torque wrench service/series MANOSKOP Model 730D Measuring r. 65-650N·m Drive L. 892mm Features:Tactile and audible release signalMount for interchangeable insert/shell toolsQuickRelease safety lockquick setting via practical keypadautomatically correct tightening torque after entering a deviating gaugeoverload protection thanks to acoustic and visual warning signalno unintentional adjustment thanks to automatic key lockdisplay function even with counter-clockwise torquesunits of measurement: N-m, ft-lb, in-lbDifferent tolerance limits can be set depending on the tightening operationOptical evaluation of the tightening operation by green and red indication on the displayAdditional protection of the default settings (function mode, click-type or setpoint value, unit of measurement, tolerance value, saving, deviating gauge) by PIN codeSaving of up to 7. 500 screwdriving dataUSB interfaceautomatic notification of the next calibration dateCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 77062-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Certified in accordance with DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a sheet steel case)PatentedSupplied with 2 mignon batteries 1.5 V. Mignon NiMH batteries AA/LR6, 1.2 V, can be used.Display deviation ± 2 %, ± 1 digit Technical features:Measuring range N·m: 65-650 N·mMeasuring range ft·lb: 48-480 ft·lbMeasuring range in·lb: 580-5800 in·lbSetting display resolution N·m: 1,0/0,1 N·mSetting display resolution ft·lb: 1,0/0,1 ft·lbSetting display resolution in·lb: 10/1,0 in·lbBattery type: Mignon (AA) 1,5V Width mm (b): 30,6 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 7500 gSize: II/65 Size square socket [inside square drive]: 22 x 28 mmHeight mm (h): 25,6 mmLength mm (L): 892 mmLF: 889 mmMA N·m: 65 N·mNominal value N·m: 650 N·mSF: 55 mmStahlwille 730DII/65Stahlwille product no: 96501965EAN: 4018754240074 

Stahlwille 730DIIR/65 Service/Series MANOSKOP torque wrenches w.reversible ratchet insert tool Model 730DR Measuring r. 65-650N·m Drive 3/4 L. 977mm Features:Sensitive and audible trigger signalMount for interchangeable insert/shell toolsQuickRelease safety lockquick setting via practical keypadautomatically correct tightening torque after entering a deviating gaugeoverload protection thanks to audible and visual warning signalno unintentional adjustment thanks to automatic key lockdisplay function even with counter-clockwise torquesunits of measurement: N-m, ft-lb, in-lbDifferent tolerance limits can be set depending on the tightening operationOptical evaluation of the tightening operation by green and red indication on the displayAdditional protection of the default settings (function mode, click-type or setpoint value, unit of measurement, tolerance value, saving, deviating gauge) by PIN codeSaving of up to 7. 500 screwdriving dataUSB interfaceautomatic notification of the next calibration dateCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 77062-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Certified in accordance with DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a sheet steel case)PatentedSupplied with 2 mignon batteries 1.5 V. Mignon NiMH batteries AA/LR6, 1.2 V, can be used.Display deviation ± 2 %, ± 1 digit Technical features:Measuring range N·m: 65-650 N·mMeasuring range ft·lb: 48-480 ft·lbMeasuring range in·lb: 580-5800 in·lbExternal square drive (inch): 3/4 Setting display resolution N·m: 1,0/0,1 N·mSetting display resolution ft·lb: 1,0/0,1 ft·lbSetting display resolution in·lb: 10/1,0 in·lbBattery type: Mignon (AA) 1,5V Width mm (b): 140 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 9000 gSize: II/65 Size square socket [inside square drive]: 22 x 28 mmHeight mm (h): 100 mmLength mm (L): 977 mmMA N·m: 65 N·mNominal value N·m: 650 N·mWeight: 3994 gStahlwille 730DIIR/65Stahlwille product no: 96502065EAN: 4018754240081 

Stahlwille 730DR/10 Service/Series MANOSKOP torque wrenches w.reversible ratchet insert tool Model 730DR Measuring r. 10-100N·m Drive 1/2 L. 501mm Features:Sensitive and audible trigger signalMount for interchangeable insert/shell toolsQuickRelease safety lockquick setting via practical keypadautomatically correct tightening torque after entering a deviating gaugeoverload protection thanks to audible and visual warning signalno unintentional adjustment thanks to automatic key lockdisplay function even with counter-clockwise torquesunits of measurement: N-m, ft-lb, in-lbDifferent tolerance limits can be set depending on the tightening operationOptical evaluation of the tightening operation by green and red indication on the displayAdditional protection of the default settings (function mode, click-type or setpoint value, unit of measurement, tolerance value, saving, deviating gauge) by PIN codeSaving of up to 7. 500 screwdriving dataUSB interfaceautomatic notification of the next calibration dateCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 77062-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Certified in accordance with DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a sheet steel case)PatentedSupplied with 2 mignon batteries 1.5 V. Mignon NiMH batteries AA/LR6, 1.2 V, can be used.Display deviation ± 2 %, ± 1 digit Technical features:Measuring range N·m: 10-100 N·mMeasuring range ft·lb: 7,4-75 ft·lbMeasuring range in·lb: 90-900 in·lbExternal square drive (inch): 1/2 Setting display resolution N·m: 0,2/0,1 N·mSetting display resolution ft·lb: 0,2/0,1 ft·lbSetting display resolution in·lb: 2/1,0 in·lbBattery type: Mignon (AA) 1,5V Width mm (b): 95 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 1657 gSize: 10 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 74 mmLength mm (L): 501 mmMA N·m: 10 N·mNominal value N·m: 100 N·mWeight: 1232 gStahlwille 730DR/10Stahlwille product no: 96501810EAN: 4018754175642 

Stahlwille 730DR/100 Service/Series MANOSKOP torque wrenches w.reversible ratchet insert tool Model 730DR Measuring r. 100-1000N·m Drive 3/4 L. 1439mm Features:Sensitive and audible trigger signalMount for interchangeable insert/shell toolsQuickRelease safety lockquick setting via practical keypadautomatically correct tightening torque after entering a deviating gaugeoverload protection thanks to audible and visual warning signalno unintentional adjustment thanks to automatic key lockdisplay function even with counter-clockwise torquesunits of measurement: N-m, ft-lb, in-lbDifferent tolerance limits can be set depending on the tightening operationOptical evaluation of the tightening operation by green and red indication on the displayAdditional protection of the default settings (function mode, click-type or setpoint value, unit of measurement, tolerance value, saving, deviating gauge) by PIN codeSaving of up to 7. 500 screwdriving dataUSB interfaceautomatic notification of the next calibration dateCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 77062-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Certified in accordance with DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a sheet steel case)PatentedSupplied with 2 mignon batteries 1.5 V. Mignon NiMH batteries AA/LR6, 1.2 V, can be used.Display deviation ± 2 %, ± 1 digit Technical features:Measuring range N·m: 100-1000 N·mMeasuring range ft·lb: 74-750 ft·lbMeasuring range in·lb: 900-9000 in·lbExternal square drive (inch): 3/4 Setting display resolution N·m: 1,0/0,1 N·mSetting display resolution ft·lb: 1,0/0,1 ft·lbSetting display resolution in·lb: 10/1,0 in·lbBattery type: Mignon (AA) 1,5V Width mm (b): 120 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 12500 gSize: 100 Size square socket [inside square drive]: 22 x 28 mmHeight mm (h): 100 mmLength mm (L): 1439 mmMA N·m: 100 N·mNominal value N·m: 1000 N·mWeight: 6910 gStahlwille 730DR/100Stahlwille product no: 96501800EAN: 4018754240050 

Stahlwille 730DR/20 Service/Series MANOSKOP torque wrenches w.reversible ratchet insert tool Model 730DR Measuring r. 20-200N·m Drive 1/2 L. 595mm Features:Sensitive and audible trigger signalMount for interchangeable insert/shell toolsQuickRelease safety lockquick setting via practical keypadautomatically correct tightening torque after entering a deviating gaugeoverload protection thanks to audible and visual warning signalno unintentional adjustment thanks to automatic key lockdisplay function even with counter-clockwise torquesunits of measurement: N-m, ft-lb, in-lbDifferent tolerance limits can be set depending on the tightening operationOptical evaluation of the tightening operation by green and red indication on the displayAdditional protection of the default settings (function mode, click-type or setpoint value, unit of measurement, tolerance value, saving, deviating gauge) by PIN codeSaving of up to 7. 500 screwdriving dataUSB interfaceautomatic notification of the next calibration dateCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 77062-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Certified in accordance with DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a sheet steel case)PatentedSupplied with 2 mignon batteries 1.5 V. Mignon NiMH batteries AA/LR6, 1.2 V, can be used.Display deviation ± 2 %, ± 1 digit Technical features:Measuring range N·m: 20-200 N·mMeasuring range ft·lb: 15-150 ft·lbMeasuring range in·lb: 180-1800 in·lbExternal square drive (inch): 1/2 Setting display resolution N·m: 0,5/0,1 N·mSetting display resolution ft·lb: 0,5/0,1 ft·lbSetting display resolution in·lb: 5/1,0 in·lbBattery type: Mignon (AA) 1,5V Width mm (b): 95 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 2198 gSize: 20 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 74 mmLength mm (L): 595 mmMA N·m: 20 N·mNominal value N·m: 200 N·mWeight: 1663 gStahlwille 730DR/20Stahlwille product no: 96501820EAN: 4018754175659 

Stahlwille 730DR/40 Service/Series MANOSKOP torque wrenches w.reversible ratchet insert tool Model 730DR Measuring r. 40-400N·m Drive 3/4 L. 738mm Features:Sensitive and audible trigger signalMount for interchangeable insert/shell toolsQuickRelease safety lockquick setting via practical keypadautomatically correct tightening torque after entering a deviating gaugeoverload protection thanks to audible and visual warning signalno unintentional adjustment thanks to automatic key lockdisplay function even with counter-clockwise torquesunits of measurement: N-m, ft-lb, in-lbDifferent tolerance limits can be set depending on the tightening operationOptical evaluation of the tightening operation by green and red indication on the displayAdditional protection of the default settings (function mode, click-type or setpoint value, unit of measurement, tolerance value, saving, deviating gauge) by PIN codeSaving of up to 7. 500 screwdriving dataUSB interfaceautomatic notification of the next calibration dateCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 77062-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Certified in accordance with DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a sheet steel case)PatentedSupplied with 2 mignon batteries 1.5 V. Mignon NiMH batteries AA/LR6, 1.2 V, can be used.Display deviation ± 2 %, ± 1 digit Technical features:Measuring range N·m: 40-400 N·mMeasuring range ft·lb: 30-300 ft·lbMeasuring range in·lb: 360-3600 in·lbExternal square drive (inch): 3/4 Setting display resolution N·m: 1,0/0,1 N·mSetting display resolution ft·lb: 1,0/0,1 ft·lbSetting display resolution in·lb: 10/1,0 in·lbBattery type: Mignon (AA) 1,5V Width mm (b): 83 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 4722 gSize: 40 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 70 mmLength mm (L): 738 mmMA N·m: 40 N·mNominal value N·m: 400 N·mWeight: 2232 gStahlwille 730DR/40Stahlwille product no: 96501840EAN: 4018754175666