Stahlwille 725B/5 Bit ratchet insert tool Hex 5/16" Tool holders9 x 12 Features: reversible with hexagon socket, 1/4" or 5/16", DIN 3126 / ISO 1173 D 6.3 or D8 for direct mounting of 1/4" or 5/16" hexagon socket C 6.3 or C 8 (size 4: 22 teeth, size 5: 30 teeth) hexagon socket C 6.3 or C 8 (size 4: 22 teeth, size 5: 30 teeth). 5: 30 teeth) Internal hex with annular compression spring Bits are easy to insert, snap in securely and are easy to pull out again; also hex with wide groove (shape E, DIN 3126 / ISO 1173) Technical features:Number of teeth: 30 Working angle: 12 °Width mm (b): 29 mmDIN: DIN 3126 / ISO 1173 D 6,3 oder D8 Size: 5 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 17,9 mmInternal hex drive [inch]: 5/16 "S: 28 mmWeight: 117 gWeigth kg: 0.12 kgStahlwille 725B/5Stahlwille product no: 58255005EAN: 4018754154715
Stahlwille 73 NM/15 Friction gauge Model 73Nm/15 Measuring r. 2-15N·m Drive 1/2 L. 298,5mm Features: indicating fixed square for clockwise measurements trailing indicator dial no "pointer flutter" during the measuring process lightweight design thanks to the use of aluminium certified in accordance with DIN EN ISO 6789-2:2017 indication deviation ± 4 % Technical features:Scale division N·m: 0,5 N·mMeasuring range N·m: 2-15 N·mExternal square drive (inch): 1/2 Width mm (b): 72 mmDIN: DIN EN ISO 6789-2:2017 Height mm (h): 50 mmLength mm (L): 298,5 mmLF: 250 mmMA N·m: 2 N·mNominal value N·m: 15 N·mWeight: 676 gWeigth kg: 0.68 kgStahlwille 73 NM/15Stahlwille product no: 50240015EAN: 4018754163830
Stahlwille 730/10 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 20-100N·m Tool holders 9 x 12 mm L. 386mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division N·m: 10 N·mScale division ft·lb: 2,5 ft·lbMeasuring range N·m: 20-100 N·mMeasuring range ft·lb: 15-75 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 0,5 N·m Weight with box: 1788 gSize: 10 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 386 mmLF: 336 mmMA N·m: 20 N·mNominal value N·m: 100 N·mSF: 17,5 mmWeight: 986 gWeigth kg: 1.570 kgStahlwille 730/10 FIXStahlwille product no: 96503010EAN: 4018754269440
Stahlwille 730/10 QUICK Torque wrench service MANOSKOP Model 730/10 Quick Measuring r. 20-100N·m Tool holders 9 x 12 mm L. 370mm Features:click-type with a dual stop signalDisplay deviation: ±4 %no resetting to "0" requiredthe measuring element is only loaded during the tightening processwith mount for interchangeable insert/shell toolsQuickRelease safety locksliding adjustment knob for quick torque settingarrow-shaped pointersnon-slip adjustment element with thumb recessdual stop signaldual scale N-m/ft-lb or N-m/in-lbOn request also available as N-m version only without double scaleErgonomic 2-component handleLeft-hand tightening by turning the insert/shell toolsTrigger mechanism insensitive to further and counter loadWith calibration certificateCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706Easy adjustment using two adjustment pointsCertificate in accordance with DIN EN ISO 6789-2:2017 Technical features:Scale division N·m: 2,5 N·mScale division ft·lb: 2,5 ft·lbMeasuring range N·m: 20-100 N·mMeasuring range ft·lb: 15-72,5 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Size: 10 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 370 mmLF: 343 mmSF: 17,5 mmWeight: 936 gWeigth kg: 0.94 kgStahlwille 730/10 QUICKStahlwille product no: 50184010EAN: 4018754266203
Stahlwille 730/100 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 200-1000N·m Tool holders 22 x 28 mm L. 1363mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division N·m: 100 N·mScale division ft·lb: 25 ft·lbMeasuring range N·m: 200-1000 N·mMeasuring range ft·lb: 150-750 ft·lbWidth mm (b): 30,6 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 5 N·m Weight with box: 11000 gSize: 100 Size square socket [inside square drive]: 22 x 28 mmHeight mm (h): 25,6 mmLength mm (L): 1363 mmLF: 1352 mmMA N·m: 200 N·mNominal value N·m: 1000 N·mSF: 55 mmWeight: 5196 gWeigth kg: 11 kgStahlwille 730/100 FIXStahlwille product no: 96503100EAN: 4018754269679
Stahlwille 730/12 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 25-130N·m Tool holders 14 x 18 mm L. 421mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division N·m: 10 N·mScale division ft·lb: 2,5 ft·lbMeasuring range N·m: 25-130 N·mMeasuring range ft·lb: 20-95 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 0,5 N·m Weight with box: 1928 gSize: 12 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 421 mmLF: 379 mmMA N·m: 25 N·mNominal value N·m: 130 N·mSF: 25 mmWeight: 1124 gWeigth kg: 1.75 kgStahlwille 730/12 FIXStahlwille product no: 96503012EAN: 4018754269457
Stahlwille 730/12 QUICK Torque wrench service MANOSKOP Model 730/12 Quick Measuring r. 25-130N·m Tool holders 14 x 18 mm L. 410mm Features:click-type with a dual stop signalDisplay deviation: ±4 %no resetting to "0" requiredthe measuring element is only loaded during the tightening processwith mount for interchangeable insert/shell toolsQuickRelease safety locksliding adjustment knob for quick torque settingarrow-shaped pointersnon-slip adjustment element with thumb recessdual stop signaldual scale N-m/ft-lb or N-m/in-lbOn request also available as N-m version only without double scaleErgonomic 2-component handleLeft-hand tightening by turning the insert/shell toolsTrigger mechanism insensitive to further and counter loadWith calibration certificateCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706Easy adjustment using two adjustment pointsCertificate in accordance with DIN EN ISO 6789-2:2017 Technical features:Scale division N·m: 2,5 N·mScale division ft·lb: 2,5 ft·lbMeasuring range N·m: 25-130 N·mMeasuring range ft·lb: 20-95 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Size: 12 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 410 mmLF: 390 mmSF: 25 mmWeight: 1074 gWeigth kg: 1.07 kgStahlwille 730/12 QUICKStahlwille product no: 50184012EAN: 4018754268863
Stahlwille 730/2 QUICK Torque wrench service MANOSKOP (N·m) Model 730/2 Quick Measuring r. 4-20N·m Tool holders 9 x 12 mm L. 179mm Features:click-typemount for interchangeable insert/shell toolsergonomically shaped, non-slip adjustment element with thumb recessoptimised ball handle for fatigue-free workingdual stop signalno need to reset to "0", as the measuring element is only loaded during the tightening processLeft-hand tightening by turning the insert/shell toolsContinued loading after click-type or loads against the functional direction, e.g. in the case of stuck screws. Further load after triggering or loads against the functional direction, e.g. with tight screws, do not act on the trigger mechanism, which is thus protected against damageCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessarywith certificateDisplay deviation ± 4 % Technical features:Scale division N·m: 0,5 N·mMeasuring range N·m: 4-20 N·mWidth mm (b): 27,5 mmSize: 2 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23,6 mmLength mm (L): 179 mmLF: 157,2 mmSF: 17,5 mmWeight: 315 gWeigth kg: 0.31 kgStahlwille 730/2 QUICKStahlwille product no: 50184002EAN: 4018754292653
Stahlwille 730/20 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 40-200N·m Tool holders 14 x 18 mm L. 467mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division N·m: 10 N·mScale division ft·lb: 5 ft·lbMeasuring range N·m: 40-200 N·mMeasuring range ft·lb: 30-150 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 1 N·m Weight with box: 1890 gSize: 20 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 467 mmLF: 424,5 mmMA N·m: 40 N·mNominal value N·m: 200 N·mSF: 25 mmWeight: 1266 gWeigth kg: 1.89 kgStahlwille 730/20 FIXStahlwille product no: 96503020EAN: 4018754269464
Stahlwille 730/20 QUICK Torque wrench service MANOSKOP Model 730/20 Quick Measuring r. 40-200N·m Tool holders 14 x 18 mm L. 455mm Features:click-type with a dual stop signalDisplay deviation: ±4 %no resetting to "0" requiredthe measuring element is only loaded during the tightening processwith mount for interchangeable insert/shell toolsQuickRelease safety locksliding adjustment knob for quick torque settingarrow-shaped pointersnon-slip adjustment element with thumb recessdual stop signaldual scale N-m/ft-lb or N-m/in-lbOn request also available as N-m version only without double scaleErgonomic 2-component handleLeft-hand tightening by turning the insert/shell toolsTrigger mechanism insensitive to further and counter loadWith calibration certificateCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706Easy adjustment using two adjustment pointsCertificate in accordance with DIN EN ISO 6789-2:2017 Technical features:Scale division N·m: 5 N·mScale division ft·lb: 5 ft·lbMeasuring range N·m: 40-200 N·mMeasuring range ft·lb: 30-145 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Size: 20 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 455 mmLF: 435 mmSF: 25 mmWeight: 1310 gWeigth kg: 1.240 kgStahlwille 730/20 QUICKStahlwille product no: 50184020EAN: 4018754268870
Stahlwille 730/4 QUICK Torque wrench service MANOSKOP (N·m) Model 730/4 Quick Measuring r. 8-40N·m Tool holders 9 x 12 mm L. 223mm Features:click-typemount for interchangeable insert/shell toolsergonomically shaped, non-slip adjustment element with thumb recessoptimised ball handle for fatigue-free workingdual stop signalno need to reset to "0", as the measuring element is only loaded during the tightening processLeft-hand tightening by turning the insert/shell toolsContinued loading after click-type or loads against the functional direction, e.g. in the case of stuck screws. Further load after triggering or loads against the functional direction, e.g. with tight screws, do not act on the trigger mechanism, which is thus protected against damageCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessarywith certificateDisplay deviation ± 4 % Technical features:Scale division N·m: 1 N·mMeasuring range N·m: 8-40 N·mWidth mm (b): 27,5 mmSize: 4 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23,6 mmLength mm (L): 223 mmLF: 200,8 mmSF: 17,5 mmWeight: 395 gWeigth kg: 0.4 kgStahlwille 730/4 QUICKStahlwille product no: 50184004EAN: 4018754292660
Stahlwille 730/40 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 80-400N·m Tool holders 14 x 18 mm L. 607mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division N·m: 20 N·mScale division ft·lb: 10 ft·lbMeasuring range N·m: 80-400 N·mMeasuring range ft·lb: 60-300 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 2 N·m Weight with box: 2444 gSize: 40 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 607 mmLF: 564,5 mmMA N·m: 80 N·mNominal value N·m: 400 N·mSF: 25 mmWeight: 1666 gWeigth kg: 2.44 kgStahlwille 730/40 FIXStahlwille product no: 96503040EAN: 4018754269471
Stahlwille 730/40 QUICK Torque wrench service MANOSKOP Model 730/40 Quick Measuring r. 80-400N·m Tool holders 14 x 18 mm L. 590mm Features:click-type with a dual stop signalDisplay deviation: ±4 %no resetting to "0" requiredthe measuring element is only loaded during the tightening processwith mount for interchangeable insert/shell toolsQuickRelease safety locksliding adjustment knob for quick torque settingarrow-shaped pointersnon-slip adjustment element with thumb recessdual stop signaldual scale N-m/ft-lb or N-m/in-lbOn request also available as N-m version only without double scaleErgonomic 2-component handleLeft-hand tightening by turning the insert/shell toolsTrigger mechanism insensitive to further and counter loadWith calibration certificateCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706Easy adjustment using two adjustment pointsCertificate in accordance with DIN EN ISO 6789-2:2017 Technical features:Scale division N·m: 10 N·mScale division ft·lb: 10 ft·lbMeasuring range N·m: 80-400 N·mMeasuring range ft·lb: 60-300 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Size: 40 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 590 mmLF: 570 mmSF: 25 mmWeight: 1540 gWeigth kg: 1.720 kgStahlwille 730/40 QUICKStahlwille product no: 50184040EAN: 4018754268887
Stahlwille 730/5 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 10-50N·m Tool holders 9 x 12 mm L. 330mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division N·m: 5 N·mScale division ft·lb: 1 ft·lbMeasuring range N·m: 10-50 N·mMeasuring range ft·lb: 7-37 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 0,25 N·m Weight with box: 1632 gSize: 5 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 330 mmLF: 280,5 mmMA N·m: 10 N·mNominal value N·m: 50 N·mSF: 17,5 mmWeight: 828 gWeigth kg: 1.420 kgStahlwille 730/5 FIXStahlwille product no: 96503005EAN: 4018754269433
Stahlwille 730/5 QUICK Torque wrench service MANOSKOP Model 730/5 Quick Measuring r. 6-50N·m Tool holders 9 x 12 mm L. 315mm Features:click-type with a dual stop signalDisplay deviation: ±4 %no resetting to "0" requiredthe measuring element is only loaded during the tightening processwith mount for interchangeable insert/shell toolsQuickRelease safety locksliding adjustment knob for quick torque settingarrow-shaped pointersnon-slip adjustment element with thumb recessdual stop signaldual scale N-m/ft-lb or N-m/in-lbOn request also available as N-m version only without double scaleErgonomic 2-component handleLeft-hand tightening by turning the insert/shell toolsTrigger mechanism insensitive to further and counter loadWith calibration certificateCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706Easy adjustment using two adjustment pointsCertificate in accordance with DIN EN ISO 6789-2:2017 Technical features:Scale division N·m: 2 N·mScale division ft·lb: 1 ft·lbMeasuring range N·m: 6-50 N·mMeasuring range ft·lb: 5-36 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Size: 5 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 315 mmLF: 288 mmSF: 17,5 mmWeight: 780 gWeigth kg: 0.780 kgStahlwille 730/5 QUICKStahlwille product no: 50184005EAN: 4018754268856
Stahlwille 730/65 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 130-650N·m Tool holders 14 x 18 mm L. 890mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division N·m: 50 N·mScale division ft·lb: 20 ft·lbMeasuring range N·m: 130-650 N·mMeasuring range ft·lb: 100-480 ft·lbWidth mm (b): 30,6 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 2,5 N·m Weight with box: 6500 gSize: 65 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 25,6 mmLength mm (L): 890 mmLF: 848 mmMA N·m: 130 N·mNominal value N·m: 650 N·mSF: 25 mmWeight: 3242 gWeigth kg: 6.5 kgStahlwille 730/65 FIXStahlwille product no: 96503065EAN: 4018754269655
Stahlwille 730/65 QUICK Torque wrench service MANOSKOP Model 730/65 Quick Measuring r. 130-650N·m Tool holders 14 x 18 mm L. 875mm Features:click-type with a dual stop signalDisplay deviation: ±4 %no resetting to "0" requiredthe measuring element is only loaded during the tightening processwith mount for interchangeable insert/shell toolsQuickRelease safety locksliding adjustment knob for quick torque settingarrow-shaped pointersnon-slip adjustment element with thumb recessdual stop signaldual scale N-m/ft-lb or N-m/in-lbOn request also available as N-m version only without double scaleErgonomic 2-component handleLeft-hand tightening by turning the insert/shell toolsTrigger mechanism insensitive to further and counter loadWith calibration certificateCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706Easy adjustment using two adjustment pointsCertificate in accordance with DIN EN ISO 6789-2:2017 Technical features:Scale division N·m: 20 N·mScale division ft·lb: 20 ft·lbMeasuring range N·m: 130-650 N·mMeasuring range ft·lb: 100-480 ft·lbWidth mm (b): 30,6 mmDIN: DIN EN ISO 6789-2:2017 Size: 65 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 25,6 mmLength mm (L): 875 mmLF: 855 mmSF: 25 mmWeight: 3192 gWeigth kg: 3.19 kgStahlwille 730/65 QUICKStahlwille product no: 50184065EAN: 4018754268894
Stahlwille 730/80 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 160-800N·m Tool holders 22 x 28 mm L. 1178mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division N·m: 100 N·mScale division ft·lb: 25 ft·lbMeasuring range N·m: 160-800 N·mMeasuring range ft·lb: 120-600 ft·lbWidth mm (b): 30,6 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 5 N·m Weight with box: 10500 gSize: 80 Size square socket [inside square drive]: 22 x 28 mmHeight mm (h): 25,6 mmLength mm (L): 1178 mmLF: 1167 mmMA N·m: 160 N·mNominal value N·m: 800 N·mSF: 55 mmWeight: 4794 gWeigth kg: 10.5 kgStahlwille 730/80 FIXStahlwille product no: 96503080EAN: 4018754269662
Stahlwille 730/80 Torque wrench service MANOSKOP Model 730/80 Measuring r. 160-800N·m Tool holders L. 970mm Features: With shell adaptor no. 7370/80, all 14 x 18 mm insert tools can also be used (max. 650 N-m) Supplied in textile bag Technical features:Scale division N·m: 20 N·mScale division ft·lb: 20 ft·lbMeasuring range N·m: 160-800 N·mMeasuring range ft·lb: 120-600 ft·lbExternal square drive (mm): 24,5 x 28 mmWidth mm (b): 46 mmHeight mm (h): 43 mmLength mm (L): 970 mmLF: 990 mmSF: 95 mmWeight: 4925 gWeigth kg: 4.93 kgStahlwille 730/80Stahlwille product no: 50180080EAN: 4018754114764
Stahlwille 730A/10 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 180-900in lb Tool holders 9 x 12 mm L. 386mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division in·lb: 100 in·lbScale division ft·lb: 2,5 ft·lbMeasuring range ft·lb: 15-75 ft·lbMeasuring range in·lb: 180-900 in·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 5 in·lb Weight with box: 1790 gSize: a/10 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 386 mmLF: 336 mmSF: 17,5 mmWeight: 988 gWeigth kg: 1.790 kgStahlwille 730A/10 FIXStahlwille product no: 96583010EAN: 4018754269792
