Stahlwille 714R/ 4 Angle and torque wrench MANOSKOP Model 714R Measuring r. 4-40N·m Drive 1/4 L. 295mm Features:with reversible ratchet (sizes 1-4), fine-tooth reversible ratchet (sizes 6-65) or insert ratchet with square drive-through (sizes 80-100) 80-100)4 measuring modes (torque, angle of rotation, torque with monitoring parameter "angle of rotation", angle of rotation with monitoring parameter "torque")High-resolution colour OLED display and lateral signal lightsOptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2,500 screwdriving operations incl. date and time stamp date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge correction: option to enter a deviating gauge to ensure the desired target valueimmediately ready for use again after relieffor controlled right-hand and left-hand tightening (size 1-65); for left-hand tightening in "click-type" function mode, the insert tool must be rotated (size 80-100)Optical, acoustic and tactile release signalTorque and rotation angle displays visible simultaneouslyMeasurement independent of the force application point (for sizes 1, 2 and 4)Safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 4-40 N·mMeasuring range ft·lb: 3-30 ft·lbMeasuring range in·lb: 36-360 in·lbExternal square drive (inch): 1/4 Battery type: Micro (AAA) 1,5V Width mm (b): 80 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 907 gSize: 4 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 70 mmLength mm (L): 295 mmWeight: 482 gWeigth kg: 0.990 kgStahlwille 714R/ 4Stahlwille product no: 96501004EAN: 4018754212736 

Stahlwille 714R/ 6 Angle and torque wrench MANOSKOP Model 714R Measuring r. 6-60N·m Drive 3/8 L. 427mm Features:with reversible ratchet (sizes 1-4), fine-tooth reversible ratchet (sizes 6-65) or insert ratchet with square drive-through (sizes 80-100) 80-100)4 measuring modes (torque, angle of rotation, torque with monitoring parameter "angle of rotation", angle of rotation with monitoring parameter "torque")High-resolution colour OLED display and lateral signal lightsOptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2,500 screwdriving operations incl. date and time stamp date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge correction: option to enter a deviating gauge to ensure the desired target valueimmediately ready for use again after relieffor controlled right-hand and left-hand tightening (size 1-65); for left-hand tightening in "click-type" function mode, the insert tool must be rotated (size 80-100)Optical, acoustic and tactile release signalTorque and rotation angle displays visible simultaneouslyMeasurement independent of the force application point (for sizes 1, 2 and 4)Safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 6-60 N·mMeasuring range ft·lb: 4,5-45 ft·lbMeasuring range in·lb: 54-540 in·lbExternal square drive (inch): 3/8 Battery type: Micro (AAA) 1,5V Width mm (b): 80 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 1390 gSize: 6 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 70 mmLength mm (L): 427 mmWeight: 965 gWeigth kg: 1.55 kgStahlwille 714R/ 6Stahlwille product no: 96501006EAN: 4018754212743 

Stahlwille 714R/10 Angle and torque wrench MANOSKOP Model 714R Measuring r. 10-100N·m Drive 1/2 L. 500mm Features:with reversible ratchet (sizes 1-4), fine-tooth reversible ratchet (sizes 6-65) or insert ratchet with square drive-through (sizes 80-100) 80-100)4 measuring modes (torque, angle of rotation, torque with monitoring parameter "angle of rotation", angle of rotation with monitoring parameter "torque")High-resolution colour OLED display and lateral signal lightsOptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2,500 screwdriving operations incl. date and time stamp date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge correction: option to enter a deviating gauge to ensure the desired target valueimmediately ready for use again after relieffor controlled right-hand and left-hand tightening (size 1-65); for left-hand tightening in "click-type" function mode, the insert tool must be rotated (size 80-100)Optical, acoustic and tactile release signalTorque and rotation angle displays visible simultaneouslyMeasurement independent of the force application point (for sizes 1, 2 and 4)Safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 10-100 N·mMeasuring range ft·lb: 7,4-75 ft·lbMeasuring range in·lb: 90-900 in·lbExternal square drive (inch): 1/2 Battery type: Micro (AAA) 1,5V Width mm (b): 80 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 1657 gSize: 10 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 70 mmLength mm (L): 500 mmWeight: 1232 gWeigth kg: 1.8 kgStahlwille 714R/10Stahlwille product no: 96501010EAN: 4018754212750 

Stahlwille 714R/100 Angle and torque wrench MANOSKOP Model 714R Measuring r. 100-1000N·m Drive 3/4 L. 1438mm Features:with reversible ratchet (sizes 1-4), fine-tooth reversible ratchet (sizes 6-65) or insert ratchet with square drive-through (sizes 80-100) 80-100)4 measuring modes (torque, angle of rotation, torque with monitoring parameter "angle of rotation", angle of rotation with monitoring parameter "torque")High-resolution colour OLED display and lateral signal lightsOptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2,500 screwdriving operations incl. date and time stamp date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge correction: option to enter a deviating gauge to ensure the desired target valueimmediately ready for use again after relieffor controlled right-hand and left-hand tightening (size 1-65); for left-hand tightening in "click-type" function mode, the insert tool must be rotated (size 80-100)Optical, acoustic and tactile release signalTorque and rotation angle displays visible simultaneouslyMeasurement independent of the force application point (for sizes 1, 2 and 4)Safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 100-1000 N·mMeasuring range ft·lb: 73-735 ft·lbMeasuring range in·lb: 885-8850 in·lbExternal square drive (inch): 3/4 Battery type: Micro (AAA) 1,5V Width mm (b): 130 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 12500 gSize: 100 Size square socket [inside square drive]: 22 x 28 mmHeight mm (h): 100 mmLength mm (L): 1438 mmWeight: 6905 gWeigth kg: 12.5 kgStahlwille 714R/100Stahlwille product no: 96501100EAN: 4018754212804 

Stahlwille 714R/20 Angle and torque wrench MANOSKOP Model 714R Measuring r. 20-200N·m Drive 1/2 L. 594mm Features:with reversible ratchet (sizes 1-4), fine-tooth reversible ratchet (sizes 6-65) or insert ratchet with square drive-through (sizes 80-100) 80-100)4 measuring modes (torque, angle of rotation, torque with monitoring parameter "angle of rotation", angle of rotation with monitoring parameter "torque")High-resolution colour OLED display and lateral signal lightsOptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2,500 screwdriving operations incl. date and time stamp date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge correction: option to enter a deviating gauge to ensure the desired target valueimmediately ready for use again after relieffor controlled right-hand and left-hand tightening (size 1-65); for left-hand tightening in "click-type" function mode, the insert tool must be rotated (size 80-100)Optical, acoustic and tactile release signalTorque and rotation angle displays visible simultaneouslyMeasurement independent of the force application point (for sizes 1, 2 and 4)Safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 20-200 N·mMeasuring range ft·lb: 15-150 ft·lbMeasuring range in·lb: 180-1800 in·lbExternal square drive (inch): 1/2 Battery type: Micro (AAA) 1,5V Width mm (b): 80 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 2198 gSize: 20 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 70 mmLength mm (L): 594 mmWeight: 1663 gWeigth kg: 2.23 kgStahlwille 714R/20Stahlwille product no: 96501020EAN: 4018754212767 

Stahlwille 714R/40 Angle and torque wrench MANOSKOP Model 714R Measuring r. 40-400N·m Drive 3/4 L. 737mm Features:with reversible ratchet (sizes 1-4), fine-tooth reversible ratchet (sizes 6-65) or insert ratchet with square drive-through (sizes 80-100) 80-100)4 measuring modes (torque, angle of rotation, torque with monitoring parameter "angle of rotation", angle of rotation with monitoring parameter "torque")High-resolution colour OLED display and lateral signal lightsOptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2,500 screwdriving operations incl. date and time stamp date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge correction: option to enter a deviating gauge to ensure the desired target valueimmediately ready for use again after relieffor controlled right-hand and left-hand tightening (size 1-65); for left-hand tightening in "click-type" function mode, the insert tool must be rotated (size 80-100)Optical, acoustic and tactile release signalTorque and rotation angle displays visible simultaneouslyMeasurement independent of the force application point (for sizes 1, 2 and 4)Safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 40-400 N·mMeasuring range ft·lb: 30-300 ft·lbMeasuring range in·lb: 360-3600 in·lbExternal square drive (inch): 3/4 Battery type: Micro (AAA) 1,5V Width mm (b): 95 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 5665 gSize: 40 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 68 mmLength mm (L): 737 mmWeight: 2275 gWeigth kg: 4.91 kgStahlwille 714R/40Stahlwille product no: 96501040EAN: 4018754212774 

Stahlwille 714R/65 Angle and torque wrench MANOSKOP Model 714R Measuring r. 65-650N·m Drive 3/4 L. 980mm Features:with reversible ratchet (sizes 1-4), fine-tooth reversible ratchet (sizes 6-65) or insert ratchet with square drive-through (sizes 80-100) 80-100)4 measuring modes (torque, angle of rotation, torque with monitoring parameter "angle of rotation", angle of rotation with monitoring parameter "torque")High-resolution colour OLED display and lateral signal lightsOptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2,500 screwdriving operations incl. date and time stamp date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge correction: option to enter a deviating gauge to ensure the desired target valueimmediately ready for use again after relieffor controlled right-hand and left-hand tightening (size 1-65); for left-hand tightening in "click-type" function mode, the insert tool must be rotated (size 80-100)Optical, acoustic and tactile release signalTorque and rotation angle displays visible simultaneouslyMeasurement independent of the force application point (for sizes 1, 2 and 4)Safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 65-650 N·mMeasuring range ft·lb: 48-480 ft·lbMeasuring range in·lb: 580-5800 in·lbExternal square drive (inch): 3/4 Battery type: Micro (AAA) 1,5V Width mm (b): 125 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 9000 gSize: 65 Size square socket [inside square drive]: 22 x 28 mmHeight mm (h): 95 mmLength mm (L): 980 mmWeight: 5137 gWeigth kg: 8.5 kgStahlwille 714R/65Stahlwille product no: 96501065EAN: 4018754212781 

Stahlwille 714R/80 Angle and torque wrench MANOSKOP Model 714R Measuring r. 80-800N·m Drive 3/4 L. 1253mm Features:with reversible ratchet (sizes 1-4), fine-tooth reversible ratchet (sizes 6-65) or insert ratchet with square drive-through (sizes 80-100) 80-100)4 measuring modes (torque, angle of rotation, torque with monitoring parameter "angle of rotation", angle of rotation with monitoring parameter "torque")High-resolution colour OLED display and lateral signal lightsOptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2,500 screwdriving operations incl. date and time stamp date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge correction: option to enter a deviating gauge to ensure the desired target valueimmediately ready for use again after relieffor controlled right-hand and left-hand tightening (size 1-65); for left-hand tightening in "click-type" function mode, the insert tool must be rotated (size 80-100)Optical, acoustic and tactile release signalTorque and rotation angle displays visible simultaneouslyMeasurement independent of the force application point (for sizes 1, 2 and 4)Safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 80-800 N·mMeasuring range ft·lb: 60-600 ft·lbMeasuring range in·lb: 720-7200 in·lbExternal square drive (inch): 3/4 Battery type: Micro (AAA) 1,5V Width mm (b): 130 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 12300 gSize: 80 Size square socket [inside square drive]: 22 x 28 mmHeight mm (h): 95 mmLength mm (L): 1253 mmWeight: 6487 gWeigth kg: 5.9 kgStahlwille 714R/80Stahlwille product no: 96501080EAN: 4018754212798 

Stahlwille 71AR/80 Torque wrench Model 71AR/80 Measuring r. 160-800N·m Drive 3/4 L. 1152mm Features: indicating trailing indicator dial double scale N-m/ft-lb scale dial made of luminescent, yellow special foil for clear recognition of the display even in poor visibility Dial indicator secured by additional protective ring Handle with integrated force equalisation mechanism Not for left-hand measurements Calibration with perfectControl calibration device no. 7794 or calibration system no. 7706. Readjustment without disassembly if necessary With certificate Delivered in textile bag Display deviation ± 4 % Technical features:Scale division N·m: 10 N·mScale division ft·lb: 10 ft·lbMeasuring range N·m: 160-800 N·mMeasuring range ft·lb: 100-600 ft·lbExternal square drive (inch): 3/4 Width mm (b): 70 mmHeight mm (h): 30 mmLength mm (L): 1152 mmLF: 1060 mmWeight: 4900 gWeigth kg: 4.9 kgStahlwille 71AR/80Stahlwille product no: 50450080EAN: 4018754124930 

Stahlwille 720NF/80 Torque wrench MANOSKOP Model 720NF/80 Measuring r. 160-800N·m Drive 3/4 L. 1034mm Features: 160-800 N-m 3/4" external square drive Technical features:Scale division N·m: 20 N·mScale division ft·lb: 20 ft·lbMeasuring range N·m: 160-800 N·mMeasuring range ft·lb: 120-600 ft·lbExternal square drive (inch): 3/4 Width mm (b): 45 mmHeight mm (h): 42 mmLength mm (L): 1034 mmLF: 938 mmMA N·m: 160 N·mNominal value N·m: 800 N·mWeight: 5650 gWeigth kg: 5.650 kgStahlwille 720NF/80Stahlwille product no: 50190081EAN: 4018754031931 

Stahlwille 721/15 QUICK Torque wrench MANOSKOP Model 721/15 Quick Measuring r. 30-150N·m Drive 1/2 L. 452mm Features:click-typeno need to reset to "0" as measuring element is only loaded during the tightening processflash adjustment via easy-to-operate clamping lever in the handleergonomically shaped, non-slip adjustment element with thumb recessOptimised ball handle for fatigue-free workingDual stop signalDouble scale N-m/ft-lbContinued load after click-type operation or loads against the functional direction, e.g. in the case of tight screws Protection of all sensitive parts by the sturdy tubular steel housingCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706. Readjustment without disassembly if necessary.Certificate in accordance with DIN EN ISO 6789-2:2017Display deviation ± 4 % Technical features:Scale division N·m: 5 N·mScale division ft·lb: 5 ft·lbMeasuring range N·m: 30-150 N·mMeasuring range ft·lb: 25-110 ft·lbExternal square drive (inch): 1/2 b1: 28 mmb2: 41 mmDIN: DIN EN ISO 6789-2:2017 Size: 15 Height mm (h1): 23 mmHeight mm (h2): 18 mmLength mm (L): 452 mmLF: 387 mmMA N·m: 30 N·mNominal value N·m: 150 N·mWeight: 1282 gWeigth kg: 1.28 kgStahlwille 721/15 QUICKStahlwille product no: 50204015EAN: 4018754268924 

Stahlwille 721/20 QUICK Torque wrench MANOSKOP Model 721/20 Quick Measuring r. 40-200N·m Drive 1/2 L. 483mm Features:click-typeno need to reset to "0" as measuring element is only loaded during the tightening processflash adjustment via easy-to-operate clamping lever in the handleergonomically shaped, non-slip adjustment element with thumb recessOptimised ball handle for fatigue-free workingDual stop signalDouble scale N-m/ft-lbContinued load after click-type operation or loads against the functional direction, e.g. in the case of tight screws Protection of all sensitive parts by the sturdy tubular steel housingCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706. Readjustment without disassembly if necessary.Certificate in accordance with DIN EN ISO 6789-2:2017Display deviation ± 4 % Technical features:Scale division N·m: 5 N·mScale division ft·lb: 5 ft·lbMeasuring range N·m: 40-200 N·mMeasuring range ft·lb: 30-145 ft·lbExternal square drive (inch): 1/2 b1: 28 mmb2: 41 mmDIN: DIN EN ISO 6789-2:2017 Size: 20 Height mm (h1): 23 mmHeight mm (h2): 18 mmLength mm (L): 483 mmLF: 418 mmMA N·m: 40 N·mNominal value N·m: 200 N·mWeight: 1349 gWeigth kg: 1.35 kgStahlwille 721/20 QUICKStahlwille product no: 50204020EAN: 4018754268931 

Stahlwille 721/30 QUICK Torque wrench MANOSKOP Model 721/30 Quick Measuring r. 60-300N·m Drive 1/2 L. 553mm Features:click-typeno need to reset to "0" as measuring element is only loaded during the tightening processflash adjustment via easy-to-operate clamping lever in the handleergonomically shaped, non-slip adjustment element with thumb recessOptimised ball handle for fatigue-free workingDual stop signalDouble scale N-m/ft-lbContinued load after click-type operation or loads against the functional direction, e.g. in the case of tight screws Protection of all sensitive parts by the sturdy tubular steel housingCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706. Readjustment without disassembly if necessary.Certificate in accordance with DIN EN ISO 6789-2:2017Display deviation ± 4 % Technical features:Scale division N·m: 10 N·mScale division ft·lb: 10 ft·lbMeasuring range N·m: 60-300 N·mMeasuring range ft·lb: 50-220 ft·lbExternal square drive (inch): 1/2 b1: 28 mmb2: 44 mmDIN: DIN EN ISO 6789-2:2017 Size: 30 Height mm (h1): 23 mmHeight mm (h2): 27,5 mmLength mm (L): 553 mmLF: 486 mmMA N·m: 60 N·mNominal value N·m: 300 N·mWeight: 1646 gWeigth kg: 1.65 kgStahlwille 721/30 QUICKStahlwille product no: 50204030EAN: 4018754268948 

Stahlwille 721/5 QUICK Torque wrench MANOSKOP Model 721/5 Quick Measuring r. 6-50N·m Drive 3/8 L. 352mm Features:click-typeno need to reset to "0" as measuring element is only loaded during the tightening processflash adjustment via easy-to-operate clamping lever in the handleergonomically shaped, non-slip adjustment element with thumb recessOptimised ball handle for fatigue-free workingDual stop signalDouble scale N-m/ft-lbContinued load after click-type operation or loads against the functional direction, e.g. in the case of tight screws Protection of all sensitive parts by the sturdy tubular steel housingCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706. Readjustment without disassembly if necessary.Certificate in accordance with DIN EN ISO 6789-2:2017Display deviation ± 4 % Technical features:Scale division N·m: 2 N·mScale division ft·lb: 1 ft·lbMeasuring range N·m: 6-50 N·mMeasuring range ft·lb: 5-36 ft·lbExternal square drive (inch): 3/8 b1: 28 mmb2: 27,5 mmDIN: DIN EN ISO 6789-2:2017 Size: 5 Height mm (h1): 23 mmHeight mm (h2): 14,5 mmLength mm (L): 352 mmLF: 293 mmMA N·m: 6 N·mNominal value N·m: 50 N·mWeight: 880 gWeigth kg: 0.880 kgStahlwille 721/5 QUICKStahlwille product no: 50204005EAN: 4018754268917 

Stahlwille 721NF/100 Torque wrench MANOSKOP Model 721NF/100 Measuring r. 200-1000N·m Drive 3/4 L. 1504mm Features:200-1000 N-m3/4" external square drivefor general maintenance work Technical features:Scale division N·m: 25 N·mScale division ft·lb: 25 ft·lbMeasuring range N·m: 200-1000 N·mMeasuring range ft·lb: 150-725 ft·lbExternal square drive (inch): 3/4 b1: 46,5 mmb2: 76 mmWidth mm (b): 200 mmDIN: DIN EN ISO 6789-2:2017 Size: 100 Height mm (h): 42 mmLength mm (L): 1504 mmLF: 1365 mmMA N·m: 200 N·mNominal value N·m: 1000 N·mWeight: 7010 gWeigth kg: 8 kgStahlwille 721NF/100Stahlwille product no: 96502001EAN: 4018754081936 

Stahlwille 721NF/80 Torque wrench MANOSKOP Model 721NF/80 Measuring r. 160-800N·m Drive 3/4 L. 1051mm Features:click-typeconvenient adjustmentdual stop signaldual scale N-m/ft-lbleft-hand tightening thanks to reversible square driveprotection of all sensitive parts thanks to the sturdy steel tube in aluminium U-profilecalibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017Delivered in a textile bagDisplay deviation ± 4 % Technical features:Scale division N·m: 20 N·mScale division ft·lb: 20 ft·lbMeasuring range N·m: 160-800 N·mMeasuring range ft·lb: 120-600 ft·lbExternal square drive (inch): 3/4 b1: 46,5 mmb2: 76 mmWidth mm (b): 150 mmDIN: DIN EN ISO 6789-2:2017 Size: 80 Height mm (h): 42 mmLength mm (L): 1051 mmLF: 938 mmMA N·m: 160 N·mNominal value N·m: 800 N·mWeight: 6380 gWeigth kg: 7.1 kgStahlwille 721NF/80Stahlwille product no: 50200081EAN: 4018754031979 

Stahlwille 721QR/15 QUICK Torque wrench MANOSKOP Model 721QR/15 Quick Measuring r. 30-150N·m Drive 1/2 L. 452,5mm Features:Click-typeFlash adjustment with easy-to-operate clamping lever in the handleRatchet with QuickRelease safety lockDual stop signalDual scale N-m/ft-lbNo need to reset to "0" as measuring element is only loaded during the tightening processFurther load after release or loads against the direction of operation, e.g. in the case of tight screws, have no effect. The release mechanism is protected from damage by the sturdy tubular steel housingProtection of all sensitive partsCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706. Readjustment without disassembly if necessary.with certificate in accordance with DIN EN ISO 6789-2:2017Display deviation ± 4 % Technical features:Scale division N·m: 5 N·mScale division ft·lb: 5 ft·lbMeasuring range N·m: 30-150 N·mMeasuring range ft·lb: 25-110 ft·lbExternal square drive (inch): 1/2 b1: 28 mmb2: 41 mmDIN: DIN EN ISO 6789-2:2017 Size: 15 Height mm (h1): 23 mmHeight mm (h2): 18 mmLength mm (L): 452,5 mmLF: 387 mmMA N·m: 30 N·mNominal value N·m: 150 N·mWeight: 1268 gWeigth kg: 1.27 kgStahlwille 721QR/15 QUICKStahlwille product no: 50204115EAN: 4018754268955 

Stahlwille 721QR/20 QUICK Torque wrench MANOSKOP Model 721QR/20 Quick Measuring r. 40-200N·m Drive 1/2 L. 482mm Features:Click-typeFlash adjustment with easy-to-operate clamping lever in the handleRatchet with QuickRelease safety lockDual stop signalDual scale N-m/ft-lbNo need to reset to "0" as measuring element is only loaded during the tightening processFurther load after release or loads against the direction of operation, e.g. in the case of tight screws, have no effect. The release mechanism is protected from damage by the sturdy tubular steel housingProtection of all sensitive partsCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706. Readjustment without disassembly if necessary.with certificate in accordance with DIN EN ISO 6789-2:2017Display deviation ± 4 % Technical features:Scale division N·m: 5 N·mScale division ft·lb: 5 ft·lbMeasuring range N·m: 40-200 N·mMeasuring range ft·lb: 30-145 ft·lbExternal square drive (inch): 1/2 b1: 28 mmb2: 41 mmDIN: DIN EN ISO 6789-2:2017 Size: 20 Height mm (h1): 23 mmHeight mm (h2): 18 mmLength mm (L): 482 mmLF: 416,5 mmMA N·m: 40 N·mNominal value N·m: 200 N·mWeight: 1338 gWeigth kg: 1.34 kgStahlwille 721QR/20 QUICKStahlwille product no: 50204120EAN: 4018754268962 

Stahlwille 721QR/20/3/1 QUICK Wheel-fitting set Model 721QR/20/3/1 Quick 5 pcs. Features:In a sturdy plastic caseContents 5-piece set:1 Standard MANOSKOP No. 721QR/20 Quick: 40-200 N-m, 30-150 ft-lb, with built-in QuickRelease ratchet, reversible, 1/2" external square drive3 wheel nut sockets No. 51IMP K: 17 mm (green); 19 mm (blue); 21 mm (red)1 QuickRelease extension No. 509QR: L. 130 mm Technical features:Measuring range N·m: 40-200 N·mMeasuring range ft·lb: 30-150 ft·lbNumber of tools: 5 pcs.Width mm (b): 95 mmHeight mm (h): 75 mmLength mm (L): 560 mmWeight: 2818 gWeigth kg: 2.82 kgStahlwille 721QR/20/3/1 QUICKStahlwille product no: 96507214EAN: 4018754283217 

Stahlwille 40/29/4 SCI Ratchet bit set 1/4" 33 pcs   Features: Ratchet bit set 1/4", 33 pcs 40/29/4 SCI in soft case with hard foam insert   Scope of delivery: Contents, 33-piece set:   1 bit ratchet No. 4008-2 1 ratchet No. 418B 8 hex socket wrench inserts, 1/4" No. 40: 5.5; 6; 7; 8; 10; 12; 13; 14 mm 1 bit for slotted screws No. 1166: 1.0 x 5.5 mm 5 bits for PHILLIPS® screws No. 1221-1223: PH1 (2x); PH2 (2x); PH3 5 bits for POZIDRIV®/SUPADRIV® screws No. PZ 1221-PZ 1223: PZ1 (2x); PZ2 (2x) 6 bits for recessed TORX® screws No. 1440-1446: T10; T15; T20; T25; T30; T40 4 bits for Allen screws No. 1300-1303: 3; 4; 5; 6 mm 1 connecting part with external hex and external square 1/4", for holding socket wrench inserts 1/4" No. 3116 1 quick change holder No. 3825/1     Technical features: Stahlwille code: 91220419 EAN: 4018754333448

Stahlwille 725/4 Ratchet insert adaptor Drive 1/4 Tool holders9 x 12 Features: reversible 22 teeth Technical features:External square drive (inch): 1/4 Number of teeth: 22 Working angle: 16.4 °Width mm (b): 22 mmSize square socket [inside square drive]: 9 x 12 mmHeight mm (h): 13,8 mmmax. torque: 40 N·mS: 17,5 mmWeight: 62 gWeigth kg: 0.060 kgStahlwille 725/4Stahlwille product no: 58254004EAN: 4018754140787 

Stahlwille 7250B/4 Spare parts set Hex 1/4 " f.725B/4 Features:Contents 9-piece:1 rotating part; 1 locking disc; 1 shift lever with pin; 1 ball; 2 compression springs; 2 retaining screws; 1 cover plate Technical features:for model: 725B/4 Internal hex drive [inch]: 1/4 "Weight: 21 gWeigth kg: 0.02 kgStahlwille 7250B/4Stahlwille product no: 19012022EAN: 4018754242658 

Stahlwille 725B/4 Bit ratchet insert tool Hex 1/4" Tool holders9 x 12 Features: reversible with hexagon socket, 1/4" or 5/16", DIN 3126 / ISO 1173 D 6.3 or D8 for direct mounting of 1/4" or 5/16" hexagon socket C 6.3 or C 8 (size 4: 22 teeth, size 5: 30 teeth) hexagon socket C 6.3 or C 8 (size 4: 22 teeth, size 5: 30 teeth). 5: 30 teeth) Internal hex with annular compression spring Bits are easy to insert, snap in securely and are easy to pull out again; also hex with wide groove (shape E, DIN 3126 / ISO 1173) Technical features:Number of teeth: 22 Working angle: 16.4 °Width mm (b): 22 mmDIN: DIN 3126 / ISO 1173 D 6,3 oder D8 Size: 4 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 13,6 mmInternal hex drive [inch]: 1/4 "S: 17,5 mmWeight: 54 gWeigth kg: 0.05 kgStahlwille 725B/4Stahlwille product no: 58255004EAN: 4018754140794 

Stahlwille 725B/5 Bit ratchet insert tool Hex 5/16" Tool holders9 x 12 Features: reversible with hexagon socket, 1/4" or 5/16", DIN 3126 / ISO 1173 D 6.3 or D8 for direct mounting of 1/4" or 5/16" hexagon socket C 6.3 or C 8 (size 4: 22 teeth, size 5: 30 teeth) hexagon socket C 6.3 or C 8 (size 4: 22 teeth, size 5: 30 teeth). 5: 30 teeth) Internal hex with annular compression spring Bits are easy to insert, snap in securely and are easy to pull out again; also hex with wide groove (shape E, DIN 3126 / ISO 1173) Technical features:Number of teeth: 30 Working angle: 12 °Width mm (b): 29 mmDIN: DIN 3126 / ISO 1173 D 6,3 oder D8 Size: 5 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 17,9 mmInternal hex drive [inch]: 5/16 "S: 28 mmWeight: 117 gWeigth kg: 0.12 kgStahlwille 725B/5Stahlwille product no: 58255005EAN: 4018754154715