Stahlwille 730DR/65 Service/Series MANOSKOP torque wrenches w.reversible ratchet insert tool Model 730DR Measuring r. 65-650N·m Drive 3/4 L. 975mm Features:Sensitive and audible trigger signalMount for interchangeable insert/shell toolsQuickRelease safety lockquick setting via practical keypadautomatically correct tightening torque after entering a deviating gaugeoverload protection thanks to audible and visual warning signalno unintentional adjustment thanks to automatic key lockdisplay function even with counter-clockwise torquesunits of measurement: N-m, ft-lb, in-lbDifferent tolerance limits can be set depending on the tightening operationOptical evaluation of the tightening operation by green and red indication on the displayAdditional protection of the default settings (function mode, click-type or setpoint value, unit of measurement, tolerance value, saving, deviating gauge) by PIN codeSaving of up to 7. 500 screwdriving dataUSB interfaceautomatic notification of the next calibration dateCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 77062-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Certified in accordance with DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a sheet steel case)PatentedSupplied with 2 mignon batteries 1.5 V. Mignon NiMH batteries AA/LR6, 1.2 V, can be used.Display deviation ± 2 %, ± 1 digit Technical features:Measuring range N·m: 65-650 N·mMeasuring range ft·lb: 48-480 ft·lbMeasuring range in·lb: 580-5800 in·lbExternal square drive (inch): 3/4 Setting display resolution N·m: 1,0/0,1 N·mSetting display resolution ft·lb: 1,0/0,1 ft·lbSetting display resolution in·lb: 10/1,0 in·lbBattery type: Mignon (AA) 1,5V Width mm (b): 85 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 6530 gSize: 65 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 70 mmLength mm (L): 975 mmMA N·m: 65 N·mNominal value N·m: 650 N·mWeight: 3767 gStahlwille 730DR/65Stahlwille product no: 96501865EAN: 4018754187638 

Stahlwille 730DR/80 Service/Series MANOSKOP torque wrenches w.reversible ratchet insert tool Model 730DR Measuring r. 80-800N·m Drive 3/4 L. 1255mm Features:Sensitive and audible trigger signalMount for interchangeable insert/shell toolsQuickRelease safety lockquick setting via practical keypadautomatically correct tightening torque after entering a deviating gaugeoverload protection thanks to audible and visual warning signalno unintentional adjustment thanks to automatic key lockdisplay function even with counter-clockwise torquesunits of measurement: N-m, ft-lb, in-lbDifferent tolerance limits can be set depending on the tightening operationOptical evaluation of the tightening operation by green and red indication on the displayAdditional protection of the default settings (function mode, click-type or setpoint value, unit of measurement, tolerance value, saving, deviating gauge) by PIN codeSaving of up to 7. 500 screwdriving dataUSB interfaceautomatic notification of the next calibration dateCalibration with the perfectControl calibration device no. 7794 or the calibration system no. 77062-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Certified in accordance with DIN EN ISO 6789-2:2017In a sturdy plastic case (size 40-100 in a sheet steel case)PatentedSupplied with 2 mignon batteries 1.5 V. Mignon NiMH batteries AA/LR6, 1.2 V, can be used.Display deviation ± 2 %, ± 1 digit Technical features:Measuring range N·m: 80-800 N·mMeasuring range ft·lb: 60-600 ft·lbMeasuring range in·lb: 720-7200 in·lbExternal square drive (inch): 3/4 Setting display resolution N·m: 1,0/0,1 N·mSetting display resolution ft·lb: 1,0/0,1 ft·lbSetting display resolution in·lb: 10/1,0 in·lbBattery type: Mignon (AA) 1,5V Width mm (b): 120 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 12500 gSize: 80 Size square socket [inside square drive]: 22 x 28 mmHeight mm (h): 90 mmLength mm (L): 1255 mmMA N·m: 80 N·mNominal value N·m: 800 N·mWeight: 6492 gStahlwille 730DR/80Stahlwille product no: 96501880EAN: 4018754240067 

Stahlwille 730II/65 QUICK Torque wrench service MANOSKOP Model 730II/65 Quick Measuring r. 130-650N·m Tool holders 22 x 28 mm L. 897mm Features:click-type with a dual stop signalDisplay deviation: ±4 %no resetting to "0" requiredthe measuring element is only loaded during the tightening processwith mount for interchangeable insert/shell toolsQuickRelease safety locksliding adjustment knob for quick torque settingarrow-shaped pointersnon-slip adjustment element with thumb recessdual stop signaldual scale N-m/ft-lb or N-m/in-lbOn request also available as N-m version only without double scaleErgonomic 2-component handleLeft-hand tightening by turning the insert/shell toolsTrigger mechanism insensitive to further and counter loadWith calibration certificateCalibration with the perfectControl calibration device no. 7794 or the calibration unit no. 7706Easy adjustment using two adjustment pointsCertificate in accordance with DIN EN ISO 6789-2:2017 Technical features:Scale division N·m: 20 N·mScale division ft·lb: 20 ft·lbMeasuring range N·m: 130-650 N·mMeasuring range ft·lb: 100-480 ft·lbWidth mm (b): 30,6 mmDIN: DIN EN ISO 6789-2:2017 Size: II/65 Size square socket [inside square drive]: 22 x 28 mmHeight mm (h): 25,6 mmLength mm (L): 897 mmLF: 907 mmSF: 55 mmWeight: 4104 gWeigth kg: 4.1 kgStahlwille 730II/65 QUICKStahlwille product no: 50184565EAN: 4018754268900 

Stahlwille 730N/10 Torque wrench service MANOSKOP Model 730N/10 Measuring r. 20-100N·m Tool holders 9 x 12 mm L. 386mm Features:click-typeno need to reset to "0" as measuring element is only loaded during the tightening processfast, precise setting thanks to QuickSelect quick adjustmentdual stop signalvery easy-to-read dual scale with colour differentiation of N-m/ft-lb or ft-lb/in-lbcontinued load after release or loads against the functional direction, e.g. with tight screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017Delivered in a textile bag (from size 65). 65)DBGM (German Federal Utility Model)Mount for interchangeable insert/shell toolsQuickRelease safety lockLeft-hand tightening by turning the insert/shell toolsDisplay deviation ± 3 % (size 2; a/2 4 %) Technical features:Scale division N·m: 10 N·mScale division ft·lb: 2,5 ft·lbMeasuring range N·m: 20-100 N·mMeasuring range ft·lb: 15-75 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 0,5 N·m Size: 10 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 386 mmLF: 336 mmMA N·m: 20 N·mNominal value N·m: 100 N·mSF: 17,5 mmWeight: 988 gWeigth kg: 1.1 kgStahlwille 730N/10Stahlwille product no: 50181010EAN: 4018754139521 

Stahlwille 730N/100 Torque wrench service MANOSKOP Model 730N/100 Measuring r. 200-1000N·m Tool holders 22 x 28 mm L. 1363mm Features:click-typeno need to reset to "0" as measuring element is only loaded during the tightening processfast, precise setting thanks to QuickSelect quick adjustmentdual stop signalvery easy-to-read dual scale with colour differentiation of N-m/ft-lb or ft-lb/in-lbcontinued load after release or loads against the functional direction, e.g. with tight screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017Delivered in a textile bag (from size 65). 65)DBGM (German Federal Utility Model)Mount for interchangeable insert/shell toolsQuickRelease safety lockLeft-hand tightening by turning the insert/shell toolsDisplay deviation ± 3 % (size 2; a/2 4 %) Technical features:Scale division N·m: 100 N·mScale division ft·lb: 25 ft·lbMeasuring range N·m: 200-1000 N·mMeasuring range ft·lb: 150-750 ft·lbWidth mm (b): 30,6 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 5 N·m Size: 100 Size square socket [inside square drive]: 22 x 28 mmHeight mm (h): 25,6 mmLength mm (L): 1363 mmLF: 1352 mmMA N·m: 200 N·mNominal value N·m: 1000 N·mSF: 55 mmWeight: 5000 gWeigth kg: 5 kgStahlwille 730N/100Stahlwille product no: 50181100EAN: 4018754239955 

Stahlwille 730N/12 Torque wrench service MANOSKOP Model 730N/12 Measuring r. 25-130N·m Tool holders 14 x 18 mm L. 421mm Features:click-typeno need to reset to "0" as measuring element is only loaded during the tightening processfast, precise setting thanks to QuickSelect quick adjustmentdual stop signalvery easy-to-read dual scale with colour differentiation of N-m/ft-lb or ft-lb/in-lbcontinued load after release or loads against the functional direction, e.g. with tight screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017Delivered in a textile bag (from size 65). 65)DBGM (German Federal Utility Model)Mount for interchangeable insert/shell toolsQuickRelease safety lockLeft-hand tightening by turning the insert/shell toolsDisplay deviation ± 3 % (size 2; a/2 4 %) Technical features:Scale division N·m: 10 N·mScale division ft·lb: 2,5 ft·lbMeasuring range N·m: 25-130 N·mMeasuring range ft·lb: 20-95 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 0,5 N·m Size: 12 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 421 mmLF: 379 mmMA N·m: 25 N·mNominal value N·m: 130 N·mSF: 25 mmWeight: 1128 gWeigth kg: 1.24 kgStahlwille 730N/12Stahlwille product no: 50181012EAN: 4018754139538 

Stahlwille 730N/2 4-20 NM Service MANOSKOP torque wrenches w.mount for insert tools Model 730N Measuring r. 4-20N·m Tool holders 9 x 12 mm L. 275mm Features:click-typeno need to reset to "0" as the measuring element is only loaded during the tightening processfast, precise setting thanks to QuickSelect quick adjustmentdual stop signalvery easy-to-read dual scale with colour differentiation of N-m/ft-lb or ft-lb/in-lbcontinued load after release or loads against the functional direction, e.g. in the case of tight screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017Delivered in a textile bag (from size 65). 65)DBGM (German Federal Utility Model)Mount for interchangeable insert/shell toolsQuickRelease safety lockLeft-hand tightening by turning the insert/shell toolsDisplay deviation ± 3 % (size 2; a/2 4 %) Technical features:Scale division N·m: 1 N·mScale division in·lb: 10 in·lbMeasuring range N·m: 4-20 N·mMeasuring range in·lb: 40-180 in·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 0,2 N·m Size: 2 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 275 mmLF: 226 mmMA N·m: 4 N·mNominal value N·m: 20 N·mSF: 17,5 mmWeight: 737 gWeigth kg: 0.81 kgStahlwille 730N/2 4-20 NMStahlwille product no: 50181102EAN: 4018754295234 

Stahlwille 730N/20 Torque wrench service MANOSKOP Model 730N/20 Measuring r. 40-200N·m Tool holders 14 x 18 mm L. 467mm Features:click-typeno need to reset to "0" as measuring element is only loaded during the tightening processfast, precise setting thanks to QuickSelect quick adjustmentdual stop signalvery easy-to-read dual scale with colour differentiation of N-m/ft-lb or ft-lb/in-lbcontinued load after release or loads against the functional direction, e.g. with tight screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017Delivered in a textile bag (from size 65). 65)DBGM (German Federal Utility Model)Mount for interchangeable insert/shell toolsQuickRelease safety lockLeft-hand tightening by turning the insert/shell toolsDisplay deviation ± 3 % (size 2; a/2 4 %) Technical features:Scale division N·m: 10 N·mScale division ft·lb: 5 ft·lbMeasuring range N·m: 40-200 N·mMeasuring range ft·lb: 30-150 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 1 N·m Size: 20 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 467 mmLF: 424,5 mmMA N·m: 40 N·mNominal value N·m: 200 N·mSF: 25 mmWeight: 1264 gWeigth kg: 1.370 kgStahlwille 730N/20Stahlwille product no: 50181020EAN: 4018754139545 

Stahlwille 730N/40 Torque wrench service MANOSKOP Model 730N/40 Measuring r. 80-400N·m Tool holders 14 x 18 mm L. 607mm Features:click-typeno need to reset to "0" as measuring element is only loaded during the tightening processfast, precise setting thanks to QuickSelect quick adjustmentdual stop signalvery easy-to-read dual scale with colour differentiation of N-m/ft-lb or ft-lb/in-lbcontinued load after release or loads against the functional direction, e.g. with tight screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017Delivered in a textile bag (from size 65). 65)DBGM (German Federal Utility Model)Mount for interchangeable insert/shell toolsQuickRelease safety lockLeft-hand tightening by turning the insert/shell toolsDisplay deviation ± 3 % (size 2; a/2 4 %) Technical features:Scale division N·m: 20 N·mScale division ft·lb: 10 ft·lbMeasuring range N·m: 80-400 N·mMeasuring range ft·lb: 60-300 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 2 N·m Size: 40 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 607 mmLF: 564,5 mmMA N·m: 80 N·mNominal value N·m: 400 N·mSF: 25 mmWeight: 1655 gWeigth kg: 1.78 kgStahlwille 730N/40Stahlwille product no: 50181040EAN: 4018754139552 

Stahlwille 730N/5 Torque wrench service MANOSKOP Model 730N/5 Measuring r. 10-50N·m Tool holders 9 x 12 mm L. 330mm Features:click-typeno need to reset to "0" as measuring element is only loaded during the tightening processfast, precise setting thanks to QuickSelect quick adjustmentdual stop signalvery easy-to-read dual scale with colour differentiation of N-m/ft-lb or ft-lb/in-lbcontinued load after release or loads against the functional direction, e.g. with tight screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017Delivered in a textile bag (from size 65). 65)DBGM (German Federal Utility Model)Mount for interchangeable insert/shell toolsQuickRelease safety lockLeft-hand tightening by turning the insert/shell toolsDisplay deviation ± 3 % (size 2; a/2 4 %) Technical features:Scale division N·m: 5 N·mScale division ft·lb: 1 ft·lbMeasuring range N·m: 10-50 N·mMeasuring range ft·lb: 7-37 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 0,25 N·m Size: 5 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 330 mmLF: 280,5 mmMA N·m: 10 N·mNominal value N·m: 50 N·mSF: 17,5 mmWeight: 831 gWeigth kg: 0.9 kgStahlwille 730N/5Stahlwille product no: 50181005EAN: 4018754139514 

Stahlwille 730N/65 Torque wrench service MANOSKOP Model 730N/65 Measuring r. 130-650N·m Tool holders 14 x 18 mm L. 890mm Features:click-typeno need to reset to "0" as measuring element is only loaded during the tightening processfast, precise setting thanks to QuickSelect quick adjustmentdual stop signalvery easy-to-read dual scale with colour differentiation of N-m/ft-lb or ft-lb/in-lbcontinued load after release or loads against the functional direction, e.g. with tight screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017Delivered in a textile bag (from size 65). 65)DBGM (German Federal Utility Model)Mount for interchangeable insert/shell toolsQuickRelease safety lockLeft-hand tightening by turning the insert/shell toolsDisplay deviation ± 3 % (size 2; a/2 4 %) Technical features:Scale division N·m: 50 N·mScale division ft·lb: 20 ft·lbMeasuring range N·m: 130-650 N·mMeasuring range ft·lb: 100-480 ft·lbWidth mm (b): 30,6 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 2,5 N·m Size: 65 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 25,6 mmLength mm (L): 890 mmLF: 848 mmMA N·m: 130 N·mNominal value N·m: 650 N·mSF: 25 mmWeight: 3231 gWeigth kg: 3.4 kgStahlwille 730N/65Stahlwille product no: 50181065EAN: 4018754163991 

Stahlwille 730N/80 Torque wrench service MANOSKOP Model 730N/80 Measuring r. 160-800N·m Tool holders 22 x 28 mm L. 1178mm Features:click-typeno need to reset to "0" as measuring element is only loaded during the tightening processfast, precise setting thanks to QuickSelect quick adjustmentdual stop signalvery easy-to-read dual scale with colour differentiation of N-m/ft-lb or ft-lb/in-lbcontinued load after release or loads against the functional direction, e.g. with tight screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017Delivered in a textile bag (from size 65). 65)DBGM (German Federal Utility Model)Mount for interchangeable insert/shell toolsQuickRelease safety lockLeft-hand tightening by turning the insert/shell toolsDisplay deviation ± 3 % (size 2; a/2 4 %) Technical features:Scale division N·m: 100 N·mScale division ft·lb: 25 ft·lbMeasuring range N·m: 160-800 N·mMeasuring range ft·lb: 120-600 ft·lbWidth mm (b): 30,6 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 5 N·m Size: 80 Size square socket [inside square drive]: 22 x 28 mmHeight mm (h): 25,6 mmLength mm (L): 1178 mmLF: 1167 mmMA N·m: 160 N·mNominal value N·m: 800 N·mSF: 55 mmWeight: 4825 gWeigth kg: 4.83 kgStahlwille 730N/80Stahlwille product no: 50181080EAN: 4018754239948 

Stahlwille 730NA/10 Torque wrench service MANOSKOP Model 730Na/10 Measuring r. 180-900in lb  Tool holders 9 x 12 mm L. 386mm Features:click-typeno reset to "0" required as measuring element is only loaded during the tightening processfast, precise setting thanks to QuickSelect quick adjustmentdual stop signalvery easy-to-read dual scale with colour differentiation of ft-lb/in-lbcontinued loading after release or loads against the functional direction, e.g. in the case of tight screws, have a negative effect on the measuring element. The release mechanism is protected from damage by the fact that it is not affected by tightened screws2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGM (German Federal Utility Model)Mount for interchangeable insert/shell toolsQuickRelease safety lockLeft-hand tightening by turning the insert/shell toolsDisplay deviation ± 3 % (Gr. A/2: 4 %) Technical features:Scale division in·lb: 100 in·lbScale division ft·lb: 2,5 ft·lbMeasuring range ft·lb: 15-75 ft·lbMeasuring range in·lb: 180-900 in·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 5 in·lb Size: a/10 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 386 mmLF: 336 mmSF: 17,5 mmWeight: 988 gWeigth kg: 1.210 kgStahlwille 730NA/10Stahlwille product no: 50581010EAN: 4018754139576 

Stahlwille 730NA/2 40-180 INLB Service MANOSKOP torque wrenches w.mount for insert tools Model 730Na Measuring r. 40-180in lb  Tool holders 9 x 12 mm L. 275mm Features:click-typeno reset to "0" required as measuring element is only loaded during the tightening processfast, precise setting thanks to QuickSelect quick adjustmentdual stop signalvery easy-to-read dual scale with colour differentiation of ft-lb/in-lbcontinued loading after release or loads against the functional direction, e.g. in the case of tight screws, have a negative effect on the measuring element. The release mechanism is protected from damage by the fact that it is not affected by tightened screws2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGM (German Federal Utility Model)Mount for interchangeable insert/shell toolsQuickRelease safety lockLeft-hand tightening by turning the insert/shell toolsDisplay deviation ± 3 % (Gr. A/2: 4 %) Technical features:Scale division in·lb: 10 in·lbScale division ft·lb: 0,5 ft·lbMeasuring range ft·lb: 3-15 ft·lbMeasuring range in·lb: 40-180 in·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 2 in·lb Size: a/2 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 275 mmLF: 226 mmSF: 17,5 mmWeight: 737 gWeigth kg: 0.96 kgStahlwille 730NA/2 40-180 INLBStahlwille product no: 50581102EAN: 4018754295326 

Stahlwille 730NA/20 Torque wrench service MANOSKOP Model 730Na/20 Measuring r. 350-1800in lb  Tool holders 14 x 18 mm L. 467mm Features:click-typeno reset to "0" required as measuring element is only loaded during the tightening processfast, precise setting thanks to QuickSelect quick adjustmentdual stop signalvery easy-to-read dual scale with colour differentiation of ft-lb/in-lbcontinued loading after release or loads against the functional direction, e.g. in the case of tight screws, have a negative effect on the measuring element. The release mechanism is protected from damage by the fact that it is not affected by tightened screws2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGM (German Federal Utility Model)Mount for interchangeable insert/shell toolsQuickRelease safety lockLeft-hand tightening by turning the insert/shell toolsDisplay deviation ± 3 % (Gr. A/2: 4 %) Technical features:Scale division in·lb: 100 in·lbScale division ft·lb: 5 ft·lbMeasuring range ft·lb: 30-150 ft·lbMeasuring range in·lb: 350-1800 in·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 10 in·lb Size: a/20 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 467 mmLF: 424,5 mmSF: 25 mmWeight: 1264 gWeigth kg: 1.49 kgStahlwille 730NA/20Stahlwille product no: 50581020EAN: 4018754139590 

Stahlwille 730NA/40 Torque wrench service MANOSKOP Model 730Na/40 Measuring r. 60-300in lb  Tool holders 14 x 18 mm L. 607mm Features:click-typeno reset to "0" required as measuring element is only loaded during the tightening processfast, precise setting thanks to QuickSelect quick adjustmentdual stop signalvery easy-to-read dual scale with colour differentiation of ft-lb/in-lbcontinued loading after release or loads against the functional direction, e.g. in the case of tight screws, have a negative effect on the measuring element. The release mechanism is protected from damage by the fact that it is not affected by tightened screws2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGM (German Federal Utility Model)Mount for interchangeable insert/shell toolsQuickRelease safety lockLeft-hand tightening by turning the insert/shell toolsDisplay deviation ± 3 % (Gr. A/2: 4 %) Technical features:Scale division in·lb: 100 in·lbScale division ft·lb: 20 ft·lbMeasuring range ft·lb: 800-3600 ft·lbMeasuring range in·lb: 60-300 in·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 2 ft·lb Size: a/40 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 607 mmLF: 564,5 mmSF: 25 mmWeight: 1655 gWeigth kg: 1.9 kgStahlwille 730NA/40Stahlwille product no: 50581040EAN: 4018754164004 

Stahlwille 730NA/5 Torque wrench service MANOSKOP Model 730Na/5 Measuring r. 90-450in lb  Tool holders 9 x 12 mm L. 330mm Features:click-typeno reset to "0" required as measuring element is only loaded during the tightening processfast, precise setting thanks to QuickSelect quick adjustmentdual stop signalvery easy-to-read dual scale with colour differentiation of ft-lb/in-lbcontinued loading after release or loads against the functional direction, e.g. in the case of tight screws, have a negative effect on the measuring element. The release mechanism is protected from damage by the fact that it is not affected by tightened screws2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGM (German Federal Utility Model)Mount for interchangeable insert/shell toolsQuickRelease safety lockLeft-hand tightening by turning the insert/shell toolsDisplay deviation ± 3 % (Gr. A/2: 4 %) Technical features:Scale division in·lb: 50 in·lbScale division ft·lb: 1 ft·lbMeasuring range ft·lb: 7-37 ft·lbMeasuring range in·lb: 90-450 in·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 2,5 in·lb Size: a/5 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 330 mmLF: 280,5 mmSF: 17,5 mmWeight: 831 gWeigth kg: 1.06 kgStahlwille 730NA/5Stahlwille product no: 50581005EAN: 4018754139569 

Stahlwille 730NII/65 FIX Service MANOSKOP torque wrench w.mount for insert tools Model 730 Fix Measuring r. 130-650N·m Tool holders 22 x 28 mm L. 911mm Features:For work in series productionAdjustment knob can be unscrewed after setting the release torque - this prevents unintentional changes to the target torqueThe TORX Tamper Resistant locking screw supplied also protects against tampering. Just like the enclosed adhesive seals. No adjustment possible without breaking the sealclick-typeno need to reset to "0" as the measuring element is only loaded during the tightening processmount for interchangeable insert/shell toolsQuickRelease safety lockquick, QuickSelect quick adjustmentDual stop signalVery easy to read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbLeft-hand tightening by turning the insert/shell toolsContinued load after click-type or loads against the functional direction, e.g. in the case of stuck screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 80-100 in a sheet steel case)Display deviation ± 3 % Technical features:Scale division N·m: 50 N·mScale division ft·lb: 20 ft·lbMeasuring range N·m: 130-650 N·mMeasuring range ft·lb: 100-480 ft·lbWidth mm (b): 30,6 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 2,5 N·m Weight with box: 7000 gSize: II/65 Size square socket [inside square drive]: 22 x 28 mmHeight mm (h): 25,6 mmLength mm (L): 911 mmLF: 900 mmMA N·m: 130 N·mNominal value N·m: 650 N·mSF: 55 mmWeight: 3490 gWeigth kg: 6.360 kgStahlwille 730NII/65 FIXStahlwille product no: 96503465EAN: 4018754269778 

Stahlwille 730NII/65 Torque wrench service MANOSKOP Model 730NII/65 Measuring r. 130-650N·m Tool holders 22 x 28 mm L. 911mm Features:click-typeno need to reset to "0" as measuring element is only loaded during the tightening processfast, precise setting thanks to QuickSelect quick adjustmentdual stop signalvery easy-to-read dual scale with colour differentiation of N-m/ft-lb or ft-lb/in-lbcontinued load after release or loads against the functional direction, e.g. with tight screws. The release mechanism is protected from damage as a result2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017Delivered in a textile bag (from size 65). 65)DBGM (German Federal Utility Model)Mount for interchangeable insert/shell toolsQuickRelease safety lockLeft-hand tightening by turning the insert/shell toolsDisplay deviation ± 3 % (size 2; a/2 4 %) Technical features:Scale division N·m: 50 N·mScale division ft·lb: 20 ft·lbMeasuring range N·m: 130-650 N·mMeasuring range ft·lb: 100-480 ft·lbWidth mm (b): 30,6 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 2,5 N·m Size: II/65 Size square socket [inside square drive]: 22 x 28 mmHeight mm (h): 25,6 mmLength mm (L): 911 mmLF: 900 mmMA N·m: 130 N·mNominal value N·m: 650 N·mSF: 55 mmWeight: 3504 gWeigth kg: 3.5 kgStahlwille 730NII/65Stahlwille product no: 50181365EAN: 4018754239986 

Stahlwille 730NR / 10FK Torque wrench service MANOSKOP Model 730NR/10 FK Measuring r. 15-75ft lb Drive 1/2 L. 420mm Features:click-typeno need to reset to "0" as measuring element is only loaded during the tightening processratchet with QuickRelease safety lockquick, precise adjustment thanks to QuickSelect quick adjustmentdual stop signalvery easy-to-read dual scale with colour differentiation of N-m/ft-lb or ft-lb/in-lbContinued load after click-type or loads against the functional direction, e.g. with tight screws in the case of tight screws, do not affect the release mechanism, which is thus protected from damage2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 65 in a sheet steel case)Display deviation ± 4 % Technical features:Scale division N·m: 10 N·mScale division ft·lb: 2,5 ft·lbMeasuring range N·m: 20-100 N·mMeasuring range ft·lb: 15-75 ft·lbExternal square drive (inch): 1/2 b1: 28 mmb2: 33 mmWidth mm (b): 95 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 0,5 N·m Weight with box: 1934 gSize: 10 FK Height mm (h): 70 mmHeight mm (h1): 23 mmHeight mm (h2): 24 mmLength mm (L): 420 mmLF: 336,5 mmWeight: 1146 gStahlwille 730NR / 10FKStahlwille product no: 96503110EAN: 4018754229383 

Stahlwille 730NR / 20FK Torque wrench service MANOSKOP Model 730NR/20 FK Measuring r. 30-150ft lb Drive 1/2 L. 513,5mm Features:click-typeno need to reset to "0" as measuring element is only loaded during the tightening processratchet with QuickRelease safety lockquick, precise adjustment thanks to QuickSelect quick adjustmentdual stop signalvery easy-to-read dual scale with colour differentiation of N-m/ft-lb or ft-lb/in-lbContinued load after click-type or loads against the functional direction, e.g. with tight screws in the case of tight screws, do not affect the release mechanism, which is thus protected from damage2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 65 in a sheet steel case)Display deviation ± 4 % Technical features:Scale division N·m: 10 N·mScale division ft·lb: 5 ft·lbMeasuring range N·m: 40-200 N·mMeasuring range ft·lb: 30-150 ft·lbExternal square drive (inch): 1/2 b1: 28 mmb2: 43 mmWidth mm (b): 95 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 1 N·m Weight with box: 2370 gSize: 20 FK Height mm (h): 70 mmHeight mm (h1): 23 mmHeight mm (h2): 26 mmLength mm (L): 513,5 mmLF: 425 mmWeight: 1583 gStahlwille 730NR / 20FKStahlwille product no: 96503120EAN: 4018754229390 

Stahlwille 730NR / 5FK Torque wrench service MANOSKOP Model 730NR/5 FK Measuring r. 7-37ft lb Drive 3/8 L. 364mm Features:click-typeno need to reset to "0" as measuring element is only loaded during the tightening processratchet with QuickRelease safety lockquick, precise adjustment thanks to QuickSelect quick adjustmentdual stop signalvery easy-to-read dual scale with colour differentiation of N-m/ft-lb or ft-lb/in-lbContinued load after click-type or loads against the functional direction, e.g. with tight screws in the case of tight screws, do not affect the release mechanism, which is thus protected from damage2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic case (size 65 in a sheet steel case)Display deviation ± 4 % Technical features:Scale division N·m: 5 N·mScale division ft·lb: 1 ft·lbMeasuring range N·m: 10-50 N·mMeasuring range ft·lb: 7-37 ft·lbExternal square drive (inch): 3/8 b1: 28 mmb2: 33 mmWidth mm (b): 90 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 0,25 N·m Weight with box: 1763 gSize: 5 FK Height mm (h): 75 mmHeight mm (h1): 23 mmHeight mm (h2): 24 mmLength mm (L): 364 mmLF: 280,5 mmWeight: 973 gStahlwille 730NR / 5FKStahlwille product no: 96503105EAN: 4018754229376 

Stahlwille 730NR/10QR FK Torque wrench service MANOSKOP Model 730NR/10QR FK Measuring r. 20-100N·m Drive 1/2 L. 428,5mm Features:click-typeno need to reset to "0" as the measuring element is only loaded during the tightening processratchet with QuickRelease safety lockquick, precise setting thanks to QuickSelect quick adjustmentdual stop signalvery easy-to-read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbContinued load after click-type or loads against the functional direction, e.g. with tight screws in the case of tight screws, do not affect the release mechanism, which is thus protected from damage2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic caseDisplay deviation ± 4 % Technical features:Scale division N·m: 10 N·mScale division ft·lb: 2,5 ft·lbMeasuring range N·m: 20-100 N·mMeasuring range ft·lb: 15-75 ft·lbExternal square drive (inch): 1/2 b1: 28 mmb2: 29 mmWidth mm (b): 92 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 0,5 N·m Weight with box: 1554 gSize: 10QR FK Height mm (h): 70 mmHeight mm (h1): 23 mmHeight mm (h2): 14,5 mmLength mm (L): 428,5 mmLF: 346,5 mmWeight: 1129 gStahlwille 730NR/10QR FKStahlwille product no: 96502110EAN: 4018754180509 

Stahlwille 730NR/20QR FK Torque wrench service MANOSKOP Model 730NR/20QR FK Measuring r. 40-200N·m Drive 1/2 L. 526mm Features:click-typeno need to reset to "0" as the measuring element is only loaded during the tightening processratchet with QuickRelease safety lockquick, precise setting thanks to QuickSelect quick adjustmentdual stop signalvery easy-to-read dual scale with colour differentiation between N-m/ft-lb or ft-lb/in-lbContinued load after click-type or loads against the functional direction, e.g. with tight screws in the case of tight screws, do not affect the release mechanism, which is thus protected from damage2-component handle with hand-friendly, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryCertificate in accordance with DIN EN ISO 6789-2:2017DBGMin a sturdy plastic caseDisplay deviation ± 4 % Technical features:Scale division N·m: 10 N·mScale division ft·lb: 5 ft·lbMeasuring range N·m: 40-200 N·mMeasuring range ft·lb: 30-150 ft·lbExternal square drive (inch): 1/2 b1: 28 mmb2: 41 mmWidth mm (b): 92 mmDIN: DIN EN ISO 6789-2:2017 Fine scale division: 1 N·m Weight with box: 2014 gSize: 20QR FK Height mm (h): 70 mmHeight mm (h1): 23 mmHeight mm (h2): 18 mmLength mm (L): 526 mmLF: 438,5 mmWeight: 1589 gStahlwille 730NR/20QR FKStahlwille product no: 96502120EAN: 4018754180516