Stahlwille 736/40 5/16 BIT holder insert tool 5/16" Tool holders14 x 18 Features: Internal hexagon with annular compression spring Bits are easy to insert, lock securely into place and are easy to remove again Technical features:Internal hex drive (inch): 5/16 Width mm (b): 16 mmSize square socket [inside square drive]: 14 x 18 mmHeight mm (h): 12,5 mmS: 25 mmWeight: 114 gWeigth kg: 0.11 kgStahlwille 736/40 5/16Stahlwille product no: 58261040EAN: 4018754103928
Stahlwille 737/10 Blank end insert tool Dimensions 8 x 14 Tool holders9 x 12 L.8mm Features: gunmetal finished to avoid damage due to high temperatures, the retaining pin, spring and support disc are only fitted after the tool has been welded on instructions are included Material: 1.2208 - 31CRV3 Technical features:Welding dimensions hxw in mm: 8 x 14 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h1): 14,5 mmHeight mm (h2): 8 mmLength mm (L): 8 mmWeight: 35 gWeigth kg: 0.04 kgStahlwille 737/10Stahlwille product no: 58270010EAN: 4018754034598
Stahlwille 737/100 Blank end insert tool Dimensions 15 x 50 Tool holders22 x 28 L.24mm Features: Gunmetal finished To avoid damage due to high temperatures, the retaining pin, spring and support disc are only fitted after the tool has been welded on Instructions are included Material: 1.2208 - 31CRV3 Technical features:Welding dimensions hxw in mm: 15 x 50 Size square socket [inside square drive]: 22 x 28 mmHeight mm (h1): 32 mmHeight mm (h2): 15 mmLength mm (L): 24 mmWeight: 483 gWeigth kg: 0.48 kgStahlwille 737/100Stahlwille product no: 58270100EAN: 4018754239740
Stahlwille 737/40 Blank end insert tool Dimensions 11 x 25 Tool holders 14 x 18 L.12mm Features: gunmetal finished to avoid damage due to high temperatures, the retaining pin, spring and support disc are only fitted after the tool has been welded on instructions are included Material: 1.2208 - 31CRV3 Technical features:Welding dimensions hxw in mm: 11 x 25 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h1): 21,5 mmHeight mm (h2): 11 mmLength mm (L): 12 mmWeight: 98 gWeigth kg: 0.1 kgStahlwille 737/40Stahlwille product no: 58270040EAN: 4018754034604
Stahlwille 7370/100 Adapter Tool holders 22x28mm Drive 24,5x28mm Features:for the use of shell tools with square drive 24.5 x 28 mm in torque wrenches with square drive 22 x 28 mm Technical features:External square drive (mm): 24,5x28 mmWidth mm (b): 33 mmSize of tool holder external square: 22x28 mmHeight mm (h): 30 mmLength mm (L): 85 mmS: 100 mmWeight: 421 gWeigth kg: 0.42 kgStahlwille 7370/100Stahlwille product no: 58291100EAN: 4018754239757
Stahlwille 7370/40 Adapter Tool holders 14 x 18mm Drive 9x12mm Features:for the use of insert tools with external square 14 x 18 mm in torque wrenches with internal square 9 x 12 mm Technical features:Internal square drive (mm): 9x12 mmWidth mm (b): 28 mmSize square socket [inside square drive]: 14 x 18 mmHeight mm (h): 21 mmLength mm (L): 60 mmS: 21,5 mmWeight: 117 gWeigth kg: 0.120 kgStahlwille 7370/40Stahlwille product no: 58290040EAN: 4018754161041
Stahlwille 7370/40-2 Adapter Tool holders 14x18mm W. 31,5mm Features:for the use of insert tools with laterally insertable dovetail guide in torque wrenches with square socket 14 x 18 mm Technical features:Width mm (b): 31,5 mmSize of tool holder external square: 14x18 mmHeight mm (h): 9,5 mmLength mm (L): 50 mmS: 34,6 mmWeight: 138 gWeigth kg: 0.14 kgStahlwille 7370/40-2Stahlwille product no: 58290042EAN: 4018754178568
Stahlwille 7380N Torque angle gauge No. 7380N Internal square 1/2" External square 1/2" L.416mm Features: For angle-controlled screw tightening, with stationary reading point Safe reading from any angle thanks to 2 inclined scales With unscrewable magnet for attaching a socket with 1/2" square drive To be used with a tightening tool, e.g. Service MANOSKOP no. 730N since a defined setting torque must first be applied for angle-controlled screw tightening, a torque wrench should always be used as a tightening tool whose capacity covers both the setting torque and the tightening force required to achieve the angle of rotation the choice of angle measuring disc - with 1/2" or 3/4" square - depends on the square of the tightening tool Technical features:Internal square [inch]: 1/2 "External square [inch]: 1/2 "Width mm (b): 78 mmHeight mm (h): 43 mmLength mm (L): 416 mmModel no.: 7380N Scale division [E1]: 2° Weight: 505 gWeigth kg: 0.5 kgStahlwille 7380NStahlwille product no: 54010001EAN: 4018754136124
Stahlwille 7385N Torque angle gauge No. 7385N Internal square 3/4" External square 3/4" L.416mm Features: For angle-controlled screw tightening, with stationary reading point Safe reading from any angle thanks to 2 inclined scales With unscrewable magnet for attaching a socket with 1/2" square drive To be used with a tightening tool, e.g. Service MANOSKOP no. 730N since a defined setting torque must first be applied for angle-controlled screw tightening, a torque wrench should always be used as a tightening tool whose capacity covers both the setting torque and the tightening force required to achieve the angle of rotation the choice of angle measuring disc - with 1/2" or 3/4" square - depends on the square of the tightening tool Technical features:Internal square [inch]: 3/4 "External square [inch]: 3/4 "Width mm (b): 78 mmHeight mm (h): 76 mmLength mm (L): 416 mmModel no.: 7385N Scale division [E1]: 2° Weight: 720 gWeigth kg: 0.720 kgStahlwille 7385NStahlwille product no: 54010002EAN: 4018754136131
Stahlwille 755/10 Torque wrench series MANOSKOP Model 755/10 Measuring r. 20-100N·m Tool holders 9 x 12 mm L. 318mm Features:For work on the assembly line or in series production. No setting scale; therefore adjustment with testing devices required, e.g. with STAHLWILLE testing devices no. 7707 W, SmartCheck or calibration systems no. 7794, no. 7706. click-typemount for interchangeable insert tools (755/4-30)dual stop signalparticularly light and handyhandle and shaft made of square steel tubecontinued load after click-type or loads against the functional direction (max. up to the measuring range limit of the torque wrench) do not affect the release mechanism, which is thus protected from damageLeft-hand tightening with reversible insert toolsOn request with preset release value (price surcharge 10%)Adjustment with torque wrench testerDisplay deviation ± 4% Technical features:Measuring range N·m: 20-100 N·mMeasuring range ft·lb: 15-74 ft·lbWidth mm (b): 28 mmSize: 10 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 24 mmLength mm (L): 318 mmLF: 289 mmMA N·m: 20 N·mNominal value N·m: 100 N·mSF: 17,5 mmWeight: 635 gWeigth kg: 0.78 kgStahlwille 755/10Stahlwille product no: 50010010EAN: 4018754031627
Stahlwille 755/20 Torque wrench series MANOSKOP Model 755/20 Measuring r. 40-200N·m Tool holders 14 x 18 mm L. 457mm Features:For work on the assembly line or in series production. No setting scale; therefore adjustment with testing devices required, e.g. with STAHLWILLE testing devices no. 7707 W, SmartCheck or calibration systems no. 7794, no. 7706. click-typemount for interchangeable insert tools (755/4-30)dual stop signalparticularly light and handyhandle and shaft made of square steel tubecontinued load after click-type or loads against the functional direction (max. up to the measuring range limit of the torque wrench) do not affect the release mechanism, which is thus protected from damageLeft-hand tightening with reversible insert toolsOn request with preset release value (price surcharge 10%)Adjustment with torque wrench testerDisplay deviation ± 4% Technical features:Measuring range N·m: 40-200 N·mMeasuring range ft·lb: 30-147 ft·lbWidth mm (b): 28 mmSize: 20 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 24 mmLength mm (L): 457 mmLF: 435 mmMA N·m: 40 N·mNominal value N·m: 200 N·mSF: 25 mmWeight: 1045 gWeigth kg: 1.05 kgStahlwille 755/20Stahlwille product no: 50010020EAN: 4018754031641
Stahlwille 755/30 Torque wrench series MANOSKOP Model 755/30 Measuring r. 60-300N·m Tool holders 14 x 18 mm L. 609mm Features:For work on the assembly line or in series production. No setting scale; therefore adjustment with testing devices required, e.g. with STAHLWILLE testing devices no. 7707 W, SmartCheck or calibration systems no. 7794, no. 7706. click-typemount for interchangeable insert tools (755/4-30)dual stop signalparticularly light and handyhandle and shaft made of square steel tubecontinued load after click-type or loads against the functional direction (max. up to the measuring range limit of the torque wrench) do not affect the release mechanism, which is thus protected from damageLeft-hand tightening with reversible insert toolsOn request with preset release value (price surcharge 10%)Adjustment with torque wrench testerDisplay deviation ± 4% Technical features:Measuring range N·m: 60-300 N·mMeasuring range ft·lb: 40-220 ft·lbWidth mm (b): 28 mmSize: 30 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 24 mmLength mm (L): 609 mmLF: 587 mmMA N·m: 60 N·mNominal value N·m: 300 N·mSF: 25 mmWeight: 1210 gWeigth kg: 1.210 kgStahlwille 755/30Stahlwille product no: 50010030EAN: 4018754031658
Stahlwille 755/4 Torque wrench series MANOSKOP Model 755/4 Measuring r. 4-40N·m Tool holders 9 x 12 mm L. 201mm Features:For work on the assembly line or in series production. No setting scale; therefore adjustment with testing devices required, e.g. with STAHLWILLE testing devices no. 7707 W, SmartCheck or calibration systems no. 7794, no. 7706. click-typemount for interchangeable insert tools (755/4-30)dual stop signalparticularly light and handyhandle and shaft made of square steel tubecontinued load after click-type or loads against the functional direction (max. up to the measuring range limit of the torque wrench) do not affect the release mechanism, which is thus protected from damageLeft-hand tightening with reversible insert toolsOn request with preset release value (price surcharge 10%)Adjustment with torque wrench testerDisplay deviation ± 4% Technical features:Measuring range N·m: 4-40 N·mMeasuring range ft·lb: 3-30 ft·lbWidth mm (b): 22 mmSize: 4 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 18 mmLength mm (L): 201 mmLF: 172 mmMA N·m: 4 N·mNominal value N·m: 40 N·mSF: 17,5 mmWeight: 500 gWeigth kg: 0.5 kgStahlwille 755/4Stahlwille product no: 50010004EAN: 4018754031603
Stahlwille 755R/1 Torque wrench series MANOSKOP Model 755R/1 Measuring r. 1,5-12,5N·m Drive 1/4 L. 173,5mm Features:For work on the assembly line or in series production. No setting scale; therefore adjustment with testing devices required, e.g. with STAHLWILLE testing devices no. 7707 W, SmartCheck or calibration systems no. 7794, no. 7706. force application point-independentclick-typewith permanently installed ratchet for socketsdual stop signalparticularly light and handyhandle and shaft made of square steel tubecontinued load after triggering or loads against the functional direction (max. up to the measuring range limit of the torque wrench) do not affect the release mechanism, which is thus protected from damageon request with preset release value (price surcharge 10%)Adjustment with torque wrench testerDisplay deviation ± 4% Technical features:Measuring range N·m: 1,5-12,5 N·mMeasuring range ft·lb: 1,0-9,0 ft·lbExternal square drive (inch): 1/4 Width mm (b): 22 mmHeight mm (h): 18 mmLength mm (L): 173,5 mmMA N·m: 1.5 N·mNominal value N·m: 12.5 N·mWeight: 335 gWeigth kg: 0.34 kgStahlwille 755R/1Stahlwille product no: 50100001EAN: 4018754096268
Stahlwille 760/15 Torque screwdriver TORSIOMETER Model 760/15 Hex 1/4" Features:indicatingtorsion flat spring as measuring elementright-hand tightening (with drag indicator) and left-hand tighteningwith 1/4" hexagon socket (F 6, 3 DIN 3126)Comparison scale in-lb and drag indicatorInserts and connecting parts with external hexagon E 6.3 (1/4") DIN 3126 / ISO 1173 are well guided and held securely in the mounting shankCertified according to DIN EN ISO 6789-2: 2017Display deviation ± 4 % Technical features:Scale division cN·m: 5 cN·mMeasuring range cN·m: 30-150 cN·mInternal hex drive (mm): F 6,3 mmMeasuring range in·lb: 3-13 in·lbDIN: DIN 3126 Size: 15 Internal hex drive [inch]: 1/4 "Length mm (L): 185 mmWeight: 225 gWeigth kg: 0.23 kgStahlwille 760/15Stahlwille product no: 51040015EAN: 4018754118915
Stahlwille 760/30 Torque screwdriver TORSIOMETER Model 760/30 Hex 1/4" Features:indicatingtorsion flat spring as measuring elementright-hand tightening (with drag indicator) and left-hand tighteningwith 1/4" hexagon socket (F 6, 3 DIN 3126)Comparison scale in-lb and drag indicatorInserts and connecting parts with external hexagon E 6.3 (1/4") DIN 3126 / ISO 1173 are well guided and held securely in the mounting shankCertified according to DIN EN ISO 6789-2: 2017Display deviation ± 4 % Technical features:Scale division cN·m: 10 cN·mMeasuring range cN·m: 60-300 cN·mInternal hex drive (mm): F 6,3 mmMeasuring range in·lb: 6-26 in·lbDIN: DIN 3126 Size: 30 Internal hex drive [inch]: 1/4 "Length mm (L): 185 mmWeight: 230 gWeigth kg: 0.230 kgStahlwille 760/30Stahlwille product no: 51040030EAN: 4018754118922
Stahlwille 760/60 Torque screwdriver TORSIOMETER Model 760/60 Hex 1/4" Features:indicatingtorsion flat spring as measuring elementright-hand tightening (with drag indicator) and left-hand tighteningwith 1/4" hexagon socket (F 6, 3 DIN 3126)Comparison scale in-lb and drag indicatorInserts and connecting parts with external hexagon E 6.3 (1/4") DIN 3126 / ISO 1173 are well guided and held securely in the mounting shankCertified according to DIN EN ISO 6789-2: 2017Display deviation ± 4 % Technical features:Scale division cN·m: 20 cN·mMeasuring range cN·m: 120-600 cN·mInternal hex drive (mm): F 6,3 mmMeasuring range in·lb: 12-52 in·lbDIN: DIN 3126 Size: 60 Internal hex drive [inch]: 1/4 "Length mm (L): 185 mmWeight: 230 gWeigth kg: 0.230 kgStahlwille 760/60Stahlwille product no: 51040060EAN: 4018754118939
Stahlwille 760/7,5 Torque screwdriver TORSIOMETER Model 760/7,5 Hex 1/4" Features:indicatingtorsion flat spring as measuring elementright-hand tightening (with drag indicator) and left-hand tighteningwith 1/4" hexagon socket (F 6, 3 DIN 3126)Comparison scale in-lb and drag indicatorInserts and connecting parts with external hexagon E 6.3 (1/4") DIN 3126 / ISO 1173 are well guided and held securely in the mounting shankCertified according to DIN EN ISO 6789-2: 2017Display deviation ± 4 % Technical features:Scale division cN·m: 2,5 cN·mMeasuring range cN·m: 15-75 cN·mInternal hex drive (mm): F 6,3 mmMeasuring range in·lb: 1,5-6,5 in·lbDIN: DIN 3126 Size: 7,5 Internal hex drive [inch]: 1/4 "Length mm (L): 185 mmWeight: 225 gWeigth kg: 0.23 kgStahlwille 760/7,5Stahlwille product no: 51040007EAN: 4018754118908
