Stahlwille 701/2 NO BATTERY Electronic torque wrench SENSOTORK Model 701/2 Measuring r. 1-20N·m Drive 1/4 L. 210mm Features:indicatingvery slim and compact designfor low torques in the range from 1 to 20 N-munits of measurement: N-m, cN-m, ft-lb, in-lbMeasurement independent of the point of application of forceErgonomic 2-component handleFully automatic calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706If necessary, readjustment without dismantling documentation. Readjustment without disassemblyCapable of documentation (with SensoMaster)Certified in accordance with DIN EN ISO 6789-2:2017In a sturdy plastic caseBattery is not includedDisplay deviation ± 4 % Technical features:Scale division in·lb: 9-180 in·lbScale division ft·lb: 0,7-15 ft·lbMeasuring range N·m: 1-20 N·mMeasuring range cN·m: 100-2000 cN·mExternal square drive (inch): 1/4 Width mm (b): 22,6 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 700 gHeight mm (h1): 26 mmHeight mm (h2): 10 mmLength mm (L): 210 mmLF: 160 mmMA N·m: 1 N·mNominal value N·m: 20 N·mWeight: 132 gWeigth kg: 0.710 kgStahlwille 701/2 NO BATTERYStahlwille product no: 96504602EAN: 4018754280919
Stahlwille 701/32/1 Torque tool set with SENSOTORK Model 701/32/1 32 pcs. Features:Features torque wrenchindicatingvery slim and compact design for small torques from 1 N-mUnits of measurement: N-m, cN-m, ft-lb, in-lbMeasurement independent of the point of application of forceAdditional functions with SensoMaster 4 software (freely available after registration at www.stahlwille.de/sensomaster): - Adjustable tightening torque - Evaluation of the tightening process using coloured LEDs, buzzer and vibration - Adjustable calibration interval - Can be documentedSupplied with lithium battery 3.6 V, type 14500Calibration with the perfectControl calibration device no. 7794 or the calibration system no. 7706. Readjustment without disassembly if necessaryWith certificateDisplay deviation ± 4 %Contents:1 torque wrench No. 701/2: 1-20 N-m, 1/4"11 1/4" sockets No. 40: 4; 5; 5. 5; 6; 7; 8; 9; 10; 11; 12; 13 mm1 1/4" QuickRelease extension No. 405QR: L. 54 mm1 bit holder No. 4123 bits for Phillips head screws No. 1221-1223: PH1; PH2; PH33 bits for Phillips head screws No. PZ1221-1223: PZ1; PZ2; PZ34 bits for hex socket screws No. 1301-1304: 4; 5; 6; 8 mm7 bits for TORX screws No. 1414-1420: T10; T15; T20; T25; T27; T30; T401 USB cable No. 7754: USB-A plug to Micro-B plug Technical features:Number of tools: 32 pcs.Battery type: Lithium-Batterie 3,6 V, Typ 14500 Width mm (b): 135 mmHeight mm (h): 55 mmLength mm (L): 320 mmWeight: 923 gWeigth kg: 0.92 kgStahlwille 701/32/1Stahlwille product no: 96090005EAN: 4018754293094
Stahlwille 71/80 Torque wrench MANOSKOP Model 71/80 Measuring r. 160-800N·m Tool holders 14 x 18 mm L. 1048mm Features:indicatingmount for interchangeable insert toolswith shell adaptor no. 7370/80, all 14 x 18 mm insert tools can also be used (max. 650 N-m)Trailing indicator dialDouble scale N-m/ft-lbScale blade made of luminescent, yellow special foil for clear recognition of the display even in poor visibilityHandle with integrated force compensation mechanismMeasuring element as bending plate in the handleWith overload protectionLeft-hand tightening by turning the torque wrenchCalibration with the perfectControl calibration device no. 7794 or calibration system no. 7706Re-adjustment without disassemblyCertificate in accordance with DIN EN ISO 6789-2:2017Delivered in a textile bagDisplay deviation ± 4 % Technical features:Scale division N·m: 10 N·mScale division ft·lb: 10 ft·lbMeasuring range N·m: 160-800 N·mMeasuring range ft·lb: 120-600 ft·lbWidth mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 24 mmLength mm (L): 1048 mmLF: 1050 mmMA N·m: 160 N·mNominal value N·m: 800 N·mSF: 95 mmWeight: 2300 gWeigth kg: 2.3 kgStahlwille 71/80Stahlwille product no: 50030080EAN: 4018754104581
Stahlwille 713R/20 Electronic angle torque wrench SENSOTORK Model 713R Measuring r. 10-200N·m Drive 1/2 L. 608mm Features:Simple and flexible operation thanks to menu navigation on large displayExceptionally wide measuring range (5 % to 100 % of the nominal value)Supplied incl. reversible ratchetAdditional insert toolsQuickRelease safety lockFor right-hand and left-hand tighteningMeasurement independent of the point of application of forceUnits of measurement: N-m, ft-lb, in-lbAdvance warning time of the visual, warning time of the visual, tactile and audible signals adjustableBacklighting of the display also for evaluating the tightening process (traffic light principle)Individual insertion tool lengths adjustableEasy to maintain thanks to simple adjustment and automatic indication of the next calibration date calibration daterecurring screwdriving operations can be summarised in a menu-guided sequence planscrewing operations are saved with a time stampindividual identification designation possibleprotected against unintentional adjustment and unauthorised access by passwordcomplies with DKD- R 3-7, Class 2with 2 certificates (torque according to DIN EN ISO 6789-2: 2017/angle of rotation)In a sturdy plastic case (Gr. 40 in a sturdy sheet steel box)Supplied with 2 AA 1.5 V batteries. AA/LR6, 1.2 V NiMH batteries can also be usedFully automatic calibration (torque) with the perfectControl calibration device no. 7794-2. Readjustment without disassemblyDBGM (German Federal Utility Model)Torque and angle of rotation are visible simultaneouslyConvenient angle of rotation measurement in an extremely wide angle of rotation rangeDisplay deviation angle of rotation ±1° ±1 digit up to 100°, >100° at least 1% ± 1 digit Technical features:Measuring range N·m: 10-200 N·mMeasuring range ft·lb: 7-148 ft·lbExternal square drive (inch): 1/2 Battery type: Mignon (AA) 1,5V Width mm (b): 43 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 2430 gSize: 20 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 26 mmLength mm (L): 608 mmLF: 524 mmSF: 25 mmWeight: 1552 gWeigth kg: 2.39 kgStahlwille 713R/20Stahlwille product no: 96501620EAN: 4018754156511
Stahlwille 713R/40 Electronic angle torque wrench SENSOTORK Model 713R Measuring r. 20-400N·m Drive 3/4 L. 838mm Features:Simple and flexible operation thanks to menu navigation on large displayExceptionally wide measuring range (5 % to 100 % of the nominal value)Supplied incl. reversible ratchetAdditional insert toolsQuickRelease safety lockFor right-hand and left-hand tighteningMeasurement independent of the point of application of forceUnits of measurement: N-m, ft-lb, in-lbAdvance warning time of the visual, warning time of the visual, tactile and audible signals adjustableBacklighting of the display also for evaluating the tightening process (traffic light principle)Individual insertion tool lengths adjustableEasy to maintain thanks to simple adjustment and automatic indication of the next calibration date calibration daterecurring screwdriving operations can be summarised in a menu-guided sequence planscrewing operations are saved with a time stampindividual identification designation possibleprotected against unintentional adjustment and unauthorised access by passwordcomplies with DKD- R 3-7, Class 2with 2 certificates (torque according to DIN EN ISO 6789-2: 2017/angle of rotation)In a sturdy plastic case (Gr. 40 in a sturdy sheet steel box)Supplied with 2 AA 1.5 V batteries. AA/LR6, 1.2 V NiMH batteries can also be usedFully automatic calibration (torque) with the perfectControl calibration device no. 7794-2. Readjustment without disassemblyDBGM (German Federal Utility Model)Torque and angle of rotation are visible simultaneouslyConvenient angle of rotation measurement in an extremely wide angle of rotation rangeDisplay deviation angle of rotation ±1° ±1 digit up to 100°, >100° at least 1% ± 1 digit Technical features:Measuring range N·m: 20-400 N·mMeasuring range ft·lb: 15-296 ft·lbExternal square drive (inch): 3/4 Battery type: Mignon (AA) 1,5V Width mm (b): 50 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 5555 gSize: 40 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 31,5 mmLength mm (L): 838 mmLF: 750 mmSF: 25 mmWeight: 2332 gWeigth kg: 4.8 kgStahlwille 713R/40Stahlwille product no: 96501640EAN: 4018754156528
Stahlwille 713R/6 Electronic angle torque wrench SENSOTORK Model 713R Measuring r. 3-60N·m Drive 3/8 L. 378mm Features:Simple and flexible operation thanks to menu navigation on large displayExceptionally wide measuring range (5 % to 100 % of the nominal value)Supplied incl. reversible ratchetAdditional insert toolsQuickRelease safety lockFor right-hand and left-hand tighteningMeasurement independent of the point of application of forceUnits of measurement: N-m, ft-lb, in-lbAdvance warning time of the visual, warning time of the visual, tactile and audible signals adjustableBacklighting of the display also for evaluating the tightening process (traffic light principle)Individual insertion tool lengths adjustableEasy to maintain thanks to simple adjustment and automatic indication of the next calibration date calibration daterecurring screwdriving operations can be summarised in a menu-guided sequence planscrewing operations are saved with a time stampindividual identification designation possibleprotected against unintentional adjustment and unauthorised access by passwordcomplies with DKD- R 3-7, Class 2with 2 certificates (torque according to DIN EN ISO 6789-2: 2017/angle of rotation)In a sturdy plastic case (Gr. 40 in a sturdy sheet steel box)Supplied with 2 AA 1.5 V batteries. AA/LR6, 1.2 V NiMH batteries can also be usedFully automatic calibration (torque) with the perfectControl calibration device no. 7794-2. Readjustment without disassemblyDBGM (German Federal Utility Model)Torque and angle of rotation are visible simultaneouslyConvenient angle of rotation measurement in an extremely wide angle of rotation rangeDisplay deviation angle of rotation ±1° ±1 digit up to 100°, >100° at least 1% ± 1 digit Technical features:Measuring range N·m: 3-60 N·mMeasuring range ft·lb: 2,5-44 ft·lbExternal square drive (inch): 3/8 Battery type: Mignon (AA) 1,5V Width mm (b): 33 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 1500 gSize: 6 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 24 mmLength mm (L): 378 mmLF: 299 mmSF: 17,5 mmWeight: 856 gWeigth kg: 1.460 kgStahlwille 713R/6Stahlwille product no: 96501606EAN: 4018754156504
Stahlwille 714/ 1 Torque and angle wrench MANOSKOP Model 714 Measuring r. 1-10N·m Drive L. 226mm Features:4 measuring modes (torque, angle of rotation, torque with monitoring variable "angle of rotation", angle of rotation with monitoring variable "torque")high-resolution colour OLED display and lateral signal lightsoptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2. 500 screwdriving operations incl. date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge block correction: Option to enter a deviating gauge value to ensure the desired target valueimmediately ready for use again after reliefright and left-hand tightening - for left-hand tightening in "click-type" function mode, the insert tool must be rotatedoptical, acoustic and tactile release signaltorque and angle of rotation displays visible simultaneouslymeasurement independent of the force application point (for gr. 1, 2 and 4)safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-m; >400 N-m: 1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 1-10 N·mMeasuring range ft·lb: 0,7-7,5 ft·lbMeasuring range in·lb: 9-90 in·lbBattery type: Micro (AAA) 1,5V Width mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 795 gSize: 1 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 226 mmLF: 188 mmSF: 17,5 mmWeight: 370 gWeigth kg: 1.02 kgStahlwille 714/ 1Stahlwille product no: 96500901EAN: 4018754222780
Stahlwille 714/ 2 Torque and angle wrench MANOSKOP Model 714 Measuring r. 2-20N·m Drive L. 226mm Features:4 measuring modes (torque, angle of rotation, torque with monitoring variable "angle of rotation", angle of rotation with monitoring variable "torque")high-resolution colour OLED display and lateral signal lightsoptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2. 500 screwdriving operations incl. date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge block correction: Option to enter a deviating gauge value to ensure the desired target valueimmediately ready for use again after reliefright and left-hand tightening - for left-hand tightening in "click-type" function mode, the insert tool must be rotatedoptical, acoustic and tactile release signaltorque and angle of rotation displays visible simultaneouslymeasurement independent of the force application point (for gr. 1, 2 and 4)safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-m; >400 N-m: 1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 2-20 N·mMeasuring range ft·lb: 1,5-15 ft·lbMeasuring range in·lb: 18-180 in·lbBattery type: Micro (AAA) 1,5V Width mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 805 gSize: 2 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 226 mmLF: 188 mmSF: 17,5 mmWeight: 380 gWeigth kg: 1.03 kgStahlwille 714/ 2Stahlwille product no: 96500902EAN: 4018754222797
Stahlwille 714/ 4 Torque and angle wrench MANOSKOP Model 714 Measuring r. 4-40N·m Drive L. 252mm Features:4 measuring modes (torque, angle of rotation, torque with monitoring variable "angle of rotation", angle of rotation with monitoring variable "torque")high-resolution colour OLED display and lateral signal lightsoptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2. 500 screwdriving operations incl. date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge block correction: Option to enter a deviating gauge value to ensure the desired target valueimmediately ready for use again after reliefright and left-hand tightening - for left-hand tightening in "click-type" function mode, the insert tool must be rotatedoptical, acoustic and tactile release signaltorque and angle of rotation displays visible simultaneouslymeasurement independent of the force application point (for gr. 1, 2 and 4)safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-m; >400 N-m: 1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 4-40 N·mMeasuring range ft·lb: 3-30 ft·lbMeasuring range in·lb: 36-360 in·lbBattery type: Micro (AAA) 1,5V Width mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 845 gSize: 4 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 252 mmLF: 214 mmSF: 17,5 mmWeight: 420 gWeigth kg: 1.07 kgStahlwille 714/ 4Stahlwille product no: 96500904EAN: 4018754222803
Stahlwille 714/ 6 Torque and angle wrench MANOSKOP Model 714 Measuring r. 6-60N·m Drive L. 393mm Features:4 measuring modes (torque, angle of rotation, torque with monitoring variable "angle of rotation", angle of rotation with monitoring variable "torque")high-resolution colour OLED display and lateral signal lightsoptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2. 500 screwdriving operations incl. date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge block correction: Option to enter a deviating gauge value to ensure the desired target valueimmediately ready for use again after reliefright and left-hand tightening - for left-hand tightening in "click-type" function mode, the insert tool must be rotatedoptical, acoustic and tactile release signaltorque and angle of rotation displays visible simultaneouslymeasurement independent of the force application point (for gr. 1, 2 and 4)safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-m; >400 N-m: 1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 6-60 N·mMeasuring range ft·lb: 4,5-45 ft·lbMeasuring range in·lb: 54-540 in·lbBattery type: Micro (AAA) 1,5V Width mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 1235 gSize: 6 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 393 mmLF: 355 mmSF: 17,5 mmWeight: 810 gWeigth kg: 1.53 kgStahlwille 714/ 6Stahlwille product no: 96500906EAN: 4018754222810
Stahlwille 714/10 Torque and angle wrench MANOSKOP Model 714 Measuring r. 10-100N·m Drive L. 466mm Features:4 measuring modes (torque, angle of rotation, torque with monitoring variable "angle of rotation", angle of rotation with monitoring variable "torque")high-resolution colour OLED display and lateral signal lightsoptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2. 500 screwdriving operations incl. date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge block correction: Option to enter a deviating gauge value to ensure the desired target valueimmediately ready for use again after reliefright and left-hand tightening - for left-hand tightening in "click-type" function mode, the insert tool must be rotatedoptical, acoustic and tactile release signaltorque and angle of rotation displays visible simultaneouslymeasurement independent of the force application point (for gr. 1, 2 and 4)safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-m; >400 N-m: 1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 10-100 N·mMeasuring range ft·lb: 7,4-75 ft·lbMeasuring range in·lb: 90-900 in·lbBattery type: Micro (AAA) 1,5V Width mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 1655 gSize: 10 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 23 mmLength mm (L): 466 mmLF: 428 mmSF: 17,5 mmWeight: 1085 gWeigth kg: 1.66 kgStahlwille 714/10Stahlwille product no: 96500910EAN: 4018754222827
Stahlwille 714/100 Torque and angle wrench MANOSKOP Model 714 Measuring r. 100-1000N·m Drive L. 1343mm Features:4 measuring modes (torque, angle of rotation, torque with monitoring variable "angle of rotation", angle of rotation with monitoring variable "torque")high-resolution colour OLED display and lateral signal lightsoptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2. 500 screwdriving operations incl. date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge block correction: Option to enter a deviating gauge value to ensure the desired target valueimmediately ready for use again after reliefright and left-hand tightening - for left-hand tightening in "click-type" function mode, the insert tool must be rotatedoptical, acoustic and tactile release signaltorque and angle of rotation displays visible simultaneouslymeasurement independent of the force application point (for gr. 1, 2 and 4)safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-m; >400 N-m: 1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 100-1000 N·mMeasuring range ft·lb: 74-750 ft·lbMeasuring range in·lb: 900-9000 in·lbBattery type: Micro (AAA) 1,5V Width mm (b): 30,6 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 10500 gSize: 100 Size square socket [inside square drive]: 22 x 28 mmHeight mm (h): 25,6 mmLength mm (L): 1343 mmLF: 1343 mmSF: 55 mmWeight: 4990 gWeigth kg: 10.5 kgStahlwille 714/100Stahlwille product no: 96500100EAN: 4018754222773
Stahlwille 714/20 Torque and angle wrench MANOSKOP Model 714 Measuring r. 20-200N·m Drive L. 547mm Features:4 measuring modes (torque, angle of rotation, torque with monitoring variable "angle of rotation", angle of rotation with monitoring variable "torque")high-resolution colour OLED display and lateral signal lightsoptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2. 500 screwdriving operations incl. date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge block correction: Option to enter a deviating gauge value to ensure the desired target valueimmediately ready for use again after reliefright and left-hand tightening - for left-hand tightening in "click-type" function mode, the insert tool must be rotatedoptical, acoustic and tactile release signaltorque and angle of rotation displays visible simultaneouslymeasurement independent of the force application point (for gr. 1, 2 and 4)safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-m; >400 N-m: 1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 20-200 N·mMeasuring range ft·lb: 15-150 ft·lbMeasuring range in·lb: 180-1800 in·lbBattery type: Micro (AAA) 1,5V Width mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 1896 gSize: 20 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 547 mmLF: 516 mmSF: 25 mmWeight: 1361 gWeigth kg: 2.07 kgStahlwille 714/20Stahlwille product no: 96500920EAN: 4018754222834
Stahlwille 714/40 Torque and angle wrench MANOSKOP Model 714 Measuring r. 40-400N·m Drive L. 687mm Features:4 measuring modes (torque, angle of rotation, torque with monitoring variable "angle of rotation", angle of rotation with monitoring variable "torque")high-resolution colour OLED display and lateral signal lightsoptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2. 500 screwdriving operations incl. date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge block correction: Option to enter a deviating gauge value to ensure the desired target valueimmediately ready for use again after reliefright and left-hand tightening - for left-hand tightening in "click-type" function mode, the insert tool must be rotatedoptical, acoustic and tactile release signaltorque and angle of rotation displays visible simultaneouslymeasurement independent of the force application point (for gr. 1, 2 and 4)safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-m; >400 N-m: 1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 40-400 N·mMeasuring range ft·lb: 30-300 ft·lbMeasuring range in·lb: 360-3600 in·lbBattery type: Micro (AAA) 1,5V Width mm (b): 28 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 5155 gSize: 40 Size square socket [inside square drive]: 14 x 18 mmHeight mm (h): 23 mmLength mm (L): 687 mmLF: 656 mmSF: 25 mmWeight: 1765 gWeigth kg: 4.93 kgStahlwille 714/40Stahlwille product no: 96500940EAN: 4018754222841
Stahlwille 714/65 Torque and angle wrench MANOSKOP Model 714 Measuring r. 65-650N·m Drive L. 890mm Features:4 measuring modes (torque, angle of rotation, torque with monitoring variable "angle of rotation", angle of rotation with monitoring variable "torque")high-resolution colour OLED display and lateral signal lightsoptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2. 500 screwdriving operations incl. date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge block correction: Option to enter a deviating gauge value to ensure the desired target valueimmediately ready for use again after reliefright and left-hand tightening - for left-hand tightening in "click-type" function mode, the insert tool must be rotatedoptical, acoustic and tactile release signaltorque and angle of rotation displays visible simultaneouslymeasurement independent of the force application point (for gr. 1, 2 and 4)safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-m; >400 N-m: 1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 65-650 N·mMeasuring range ft·lb: 48-480 ft·lbMeasuring range in·lb: 580-5800 in·lbBattery type: Micro (AAA) 1,5V Width mm (b): 30,6 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 7000 gSize: 65 Size square socket [inside square drive]: 22 x 28 mmHeight mm (h): 25,6 mmLength mm (L): 890 mmLF: 890 mmSF: 55 mmWeight: 3222 gWeigth kg: 7 kgStahlwille 714/65Stahlwille product no: 96500965EAN: 4018754222858
Stahlwille 714/80 Torque and angle wrench MANOSKOP Model 714 Measuring r. 80-800N·m Drive L. 1158mm Features:4 measuring modes (torque, angle of rotation, torque with monitoring variable "angle of rotation", angle of rotation with monitoring variable "torque")high-resolution colour OLED display and lateral signal lightsoptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2. 500 screwdriving operations incl. date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge block correction: Option to enter a deviating gauge value to ensure the desired target valueimmediately ready for use again after reliefright and left-hand tightening - for left-hand tightening in "click-type" function mode, the insert tool must be rotatedoptical, acoustic and tactile release signaltorque and angle of rotation displays visible simultaneouslymeasurement independent of the force application point (for gr. 1, 2 and 4)safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-m; >400 N-m: 1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 80-800 N·mMeasuring range ft·lb: 60-600 ft·lbMeasuring range in·lb: 720-7200 in·lbBattery type: Micro (AAA) 1,5V Width mm (b): 30,6 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 10400 gSize: 80 Size square socket [inside square drive]: 22 x 28 mmHeight mm (h): 25,6 mmLength mm (L): 1158 mmLF: 1158 mmSF: 55 mmWeight: 4572 gWeigth kg: 10.4 kgStahlwille 714/80Stahlwille product no: 96500980EAN: 4018754222865
Stahlwille 714R/ 1 Angle and torque wrench MANOSKOP Model 714R Measuring r. 1-10N·m Drive 1/4 L. 269mm Features:with reversible ratchet (sizes 1-4), fine-tooth reversible ratchet (sizes 6-65) or insert ratchet with square drive-through (sizes 80-100) 80-100)4 measuring modes (torque, angle of rotation, torque with monitoring parameter "angle of rotation", angle of rotation with monitoring parameter "torque")High-resolution colour OLED display and lateral signal lightsOptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2,500 screwdriving operations incl. date and time stamp date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge correction: option to enter a deviating gauge to ensure the desired target valueimmediately ready for use again after relieffor controlled right-hand and left-hand tightening (size 1-65); for left-hand tightening in "click-type" function mode, the insert tool must be rotated (size 80-100)Optical, acoustic and tactile release signalTorque and rotation angle displays visible simultaneouslyMeasurement independent of the force application point (for sizes 1, 2 and 4)Safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 1-10 N·mMeasuring range ft·lb: 0,7-7,5 ft·lbMeasuring range in·lb: 9-90 in·lbExternal square drive (inch): 1/4 Battery type: Micro (AAA) 1,5V Width mm (b): 80 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 857 gSize: 1 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 70 mmLength mm (L): 269 mmWeight: 432 gWeigth kg: 0.950 kgStahlwille 714R/ 1Stahlwille product no: 96501001EAN: 4018754212712
Stahlwille 714R/ 2 Angle and torque wrench MANOSKOP Model 714R Measuring r. 2-20N·m Drive 1/4 L. 269mm Features:with reversible ratchet (sizes 1-4), fine-tooth reversible ratchet (sizes 6-65) or insert ratchet with square drive-through (sizes 80-100) 80-100)4 measuring modes (torque, angle of rotation, torque with monitoring parameter "angle of rotation", angle of rotation with monitoring parameter "torque")High-resolution colour OLED display and lateral signal lightsOptical evaluation of the tightening torque: Yellow light (pre-warning threshold reached), green light (in target range), red light (measured value outside tolerance range)Free configurable menu structureBayonet lock for battery/rechargeable batteryOptional: Li-ion rechargeable battery no. 7195-2 and charger no. 71603 function modes: click-type (patented electromechanical release), peak hold (display mode with peak value display) and track (display mode with actual value display)Micro-USB interface for data exchangeoptional Bluetooth Low Energy module (5. 2)QuickRelease safety lock - change system for insert toolsData storage of up to 2,500 screwdriving operations incl. date and time stamp date and time stampUp to 200 fastening operations can be programmed in a maximum of 25 schedulesDifferent tolerance limits can be set depending on the fastening operationAcoustic and visual evaluation of the fastening operationFast and precise adjustment via keypad keypadno unintentional adjustment thanks to password-protected key lockacoustic and visual signal warns of torque wrench overload and forced tighteningautomatic reminder of the next calibration date, freely configurable according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation) to reduce error influencing factorsUnits of measurement: N-m, ft-lb, in-lbautomatic gauge correction: option to enter a deviating gauge to ensure the desired target valueimmediately ready for use again after relieffor controlled right-hand and left-hand tightening (size 1-65); for left-hand tightening in "click-type" function mode, the insert tool must be rotated (size 80-100)Optical, acoustic and tactile release signalTorque and rotation angle displays visible simultaneouslyMeasurement independent of the force application point (for sizes 1, 2 and 4)Safe handling thanks to ergonomically shaped 2-component handle (resistant against the most common oils, greases, fuels, brake fluids and Skydrol)3 certificates enclosed (torque indicating/click-type according to DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)in a sturdy plastic case (sizes 40-100 in a sheet steel case)in a sturdy plastic case (sizes 40-100 in a sheet steel case). 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 micro batteries AAA/LR03, 1.5 VDisplay resolution angle of rotation 0, 1°Display deviation rotation angle ±1°, ±1 digit up to 100°, >100° at least 1%, ± 1 digitDisplay resolution torque ? 60 N-m: 0.01 N-m; > 60 N-m: 0.1 N-mDisplay deviation torque ± 2 %, ± 1 digit Technical features:Measuring range N·m: 2-20 N·mMeasuring range ft·lb: 1,5-15 ft·lbMeasuring range in·lb: 18-180 in·lbExternal square drive (inch): 1/4 Battery type: Micro (AAA) 1,5V Width mm (b): 80 mmDIN: DIN EN ISO 6789-2:2017 Weight with box: 867 gSize: 2 Size square socket [inside square drive]: 9 x 12 mmHeight mm (h): 70 mmLength mm (L): 269 mmWeight: 442 gWeigth kg: 1.030 kgStahlwille 714R/ 2Stahlwille product no: 96501002EAN: 4018754212729
